Si-811 glass coating agent, is featured with advantageous performances of enhancing finish glossiness, water repellency and anti-fouling, forming a genuine protective film to car paint. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness.
Product Feature
Si-811 glass coating agent, is featured with advantageous performances of enhancing finish glossiness, water repellency and anti-fouling, forming a genuine protective film to car paint. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness.
Product Specification / Models
Pre-practice treatment
Finish treatment before vehicle glass coating is dependent on finish conditions, and it is critical to the practice, for inferior treatment may influence the adhesiveness and basic performance of glass coating film, thus please determine whether it needs iron powder removal, grinding and polishing, and air gun blow-off procedures on basis of the finish conditions, but do note that degreasing is necessary
Other Information
1. This product is fast try, please avoid practice under burning sun, otherwise wiping would be impeded;
2. Avoid practice in temperature environment under 10;
3. Please carry out practice under complete cool-off state of the vehicle body, since vehicle body heat may expedite product hardening rate leading to wiping obstruction;
4. Please completely clear fouling attached on vehicle body and carry out degreasing before practice;
5. Please read practice manual in details and follow practice procedures therein
Combined different series of products can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness.
Product Feature
Si-701 and Si-901 double film glass coating overlay, protects vehicle finish with excellent and extended durability, consolidating top-level 3D glass coating film, which is featured with superior performances of improving finish glossiness, water-repellency and anti-fouling properties. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness.
Finish treatment before vehicle glass coating is dependent on finish conditions, and it is critical to the practice, for inferior treatment may influence the adhesiveness and basic performance of glass coating film, thus please determine whether it needs iron powder removal, grinding and polishing, and air gun blow-off procedures on basis of the finish conditions, but do note that degreasing is necessary
Other Information
After completion of whole vehicle Si-901 glass coating practice, postpone for above 2 hours to carry out X-03 protectant practice;
1. Jiggle before practice, spray X-03 protectant on the finish, 4 to 5 times for half the hood.;
2. Use a dry towel to gently wipe in alternate lateral and vertical linearly, then use another dry towel to wipe with polishing brightness to complete;
3. It is recommended a practice of X-03 protectant for every 3-6 months of the vehicle to better protect the glass coating film.
Notice: Do not use excessive quantity leading to nonuniform practice
Si-811 glass coating agent, is featured with advantageous performances of enhancing finish glossiness, water repellency and anti-fouling, forming a genuine protective film to car paint. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness.
Product Feature
Si-811 glass coating agent, is featured with advantageous performances of enhancing finish glossiness, water repellency and anti-fouling, forming a genuine protective film to car paint. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness.
Product Specification / Models
Si-811 glass coating agent, is featured with advantageous performances of enhancing finish glossiness, water repellency and anti-fouling, forming a genuine protective film to car paint. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness.
Other Information
Finish treatment before vehicle glass coating is dependent on finish conditions, and it is critical to the practice, for inferior treatment may influence the adhesiveness and basic performance of glass coating film, thus please determine whether it needs iron powder removal, grinding and polishing, and air gun blow-off procedures on basis of the finish conditions, but do note that degreasing is necessary.
JHG shower door is produced with several types of glass. The current modern design trend has given us more choice on glass types, colors, and patterns.
Shower door glass is made with tempered glass,laminated glass , with excellent drilling ,cutouts ,and polished edge
The main products series :
** Tempered clear glass
clear glass is the most ordinarily used option for shower enclosures, low cost and easy clean
**Tempered pattern glass
The pattern bring distinctive decorative on the glass surface
Let the glass in high opacity ,guarantee a higher level of privacy
One side of the glass is patterned ,and the other side is flat for easier cleaning
JHG shower door is produced with several types of glass. The current modern design trend has given us more choice on glass types, colors, and patterns.
Shower door glass is made with tempered glass , with excellent drilling ,cutouts ,and polished edge
The main products series :
**Tempered clear glass
clear glass is the most ordinarily used option for shower enclosures, low cost and easy clean
**Tempered rain/nashiji pattern glass
The pattern bring distinctive decorative on the glass surface
Let the glass in high opacity ,guarantee a higher level of privacy
One side of the glass is patterned ,and the other side is flat for easier cleaning
we may offer 3mm/3.2mm/4mm/5mm/6mm tempered solar glass ,
glass mainly used for PV module ,solar collector ,greenhouse ,
solar transmission >91.5%
AR coating max solar transmission>99%
SOLAR GLASS
JHG solar glass including texture glass and flat glass ,it is the nice performance low iron glass with high solar transmittance, and low reflection .
After tempered, it will be the ideal choice for photovoltaics, solar thermal collector ,and greenhouse .
Size
Maximum Size:1665*2200mm
Minimum Size: 300*300mm
Specifiction
Main thickness 2-5mm
Dimension tolerance �?�±1.0mm
Thickness tolerance �?�±0.2mm
Diagonal tolerance 0.2%
Overall bow <0.2%
Iron content 110ppm
Solar transmittance from 91.5-99%
(wavelength rang 380-1100mm)
Hardness H
Main glass series
2-5mm Tempered low iron float glass
2-5mm Tempered low iron texure/mistlite glass
2-5mm AR coating glass
2-5mm High hazed tempered glass
2-5mm silk printed tempered glass
JHG tinted glass is produced by metal oxides to the float glass. The colour may be transferred in the series of blue, green, grey, bronze flexibly. The performance of visible light, privacy and solar heat transmission will be changed arrording the colour change. Different tinted glass offers varied application possibility-from interior partitions, to home appliance, to furniture, to facades and auto field. Reflective glass is float glass with a metallic coating that cuts off solar heat.The coating film may provide mirror effect, preventing visibility from outside and preserving privacy. JHG mainly offer 2 kinds of reflective glass. Hard reflective glass (on line) includes blue, green, grey, bronze, pink, silver colour, Soft reflective glass (off line) includes golden, silver, purple colur.
Specification
Si-02 wheel glass coating practice method
1. Completely clear fouling attached on the wheel hub, and use a air gun to blow off moisture until it is completely dry;
2. Drip Si-02 wheel glass coating agent on coating cloth, and smear the wheel uniformly, notice not to smear repeatedly (repeated smearing leads to visible traces);
3. Keep still standing above 5 hours after smearing, or use a hot lamp or hot blast to expedite hardening rate of the glass coating film
Other Information
Note
1. Avoid engaging water or rinsing the vehicle with 24 hours after practice.
2. This product is a mild irritant to skin, please wear protective gloves if allergic with its practice.
Properties: The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.953.01g/cm3, melting point about 1000centigrade, specific heat 1.056j/gcentigradeat 18100centigrade. Its slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800centigrade will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively.
Specifications:
Appearance white powder
F 52% min
Al 12% min
Na 33% max
SiO2 0.36% max
Fe2O3 0.08% max
CaO 0.5% max
P2O5 0.03% max
SO4 0.6% max
H2O 0.4% max
Loss on ignition 2 % max
Uses: Its mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels.
Packing & Storage: In plastic coating woven bags with plastic film inside, 25kg,40kgs, 50kgs or 1000kgs net each, or as the requirement of clients.Stored: in a cool , ventilated, dry place.
The Si-901 glass coating agent is featured with superior performances of improving finish glossiness, water-repellency and anti-fouling properties
Product Feature
The Si-901 glass coating agent is featured with superior performances of improving finish glossiness, water-repellency and anti-fouling propertiesrecommended to combine with Si-901 practice to achieve premium coating overlay, which consolidate top-level 3D glass coating film whilst protecting vehicle finish with excellent and extended durability. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness.
Product Specification / Models
KISHO Si-901 [Specifications]1L,2L,4L,17L [Ingredients]SiO2 [Specifications]1L,2L,4L,17L [Dosage]One liter liquid construction 34 cars, each car was 30ml
Application
Si-811 glass coating agent, is featured with advantageous performances of enhancing finish glossiness, water repellency and anti-fouling, forming a genuine protective film to car paint. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness.
Other Information
Finish treatment before vehicle glass coating is dependent on finish conditions, and it is critical to the practice, for inferior treatment may influence the adhesiveness and basic performance of glass coating film, thus please determine whether it needs iron powder removal, grinding and polishing, and air gun blow-off procedures on basis of the finish conditions, but do note that degreasing is necessary.
Two component, acrylic aliphatic polyurethane coating. Offers excellent gloss and colour retention. It is used for subtracts as steel, aluminum, glass-fiber, plywood etc.
Kaolin uses are multiple and diverse. Kaolin are used as functional filler, extender, ceramic raw material and pigment because of its whiteness and fine particle size. Kaolin also hold importance as raw material in refractory applications, concrete, rubber and fiber glass manufacturing. We, as a Kaolin Exporter welcome any size of international orders from Middle East and other countries.
Applications:
Paper:
Kaolin used as a coating pigment and as a filler to replace fiber. It possesses desirable optical properties.
Concrete:
Kaolin helps to improve strength and durability of concrete. When added to concrete mix, reacts with free lime released during cement hydration to produce additional cementitious material, resulting in an improved high performance concrete.
Plastics :
Kaolin is widely used as filler in the plastics industry because of its inert chemical nature and its unique size, shape and structure.
Agriculture :
It is used as a carrier and diluent in fertilizers, pesticides and related products. It is suitable as carrier because it aides the retention of the formulations on the plant.
Rubber :
It is commonly used as functional filler in rubber applications. While Kaolin improves overall performance for Rubber in general, different types of white pigment play specific roles in rubber application.
Paint :
Kaolin used as an extender in paints. It reduces the amount of expensive pigment such as Titanium Dioxide. It assists with desirable rheological properties that help maintain proper dispersion and provide bulk to the product.
Ceramic :
Kaolin improves whiteness and brightness of ceramic body. Good plasticity, good shrinkage, low water absorption and casting rate are also very important properties of kaolin.
Product Overview:
Bring the bold and aromatic flavors of Thailand into any kitchen with De Siam Thai Cooking Sauces & Pastes expertly crafted to simplify the preparation of authentic Thai dishes at home or in professional kitchens. With ready-to-use sauces made from premium Thai ingredients, De Siam makes it easy to recreate restaurant-quality meals in minutes.
Available Varieties:
Green Curry Paste - Rich, herbal, and aromatic
Red Curry Paste -Spicy and robust with depth
Tom Yum Paste - Tangy, spicy base for the iconic Thai soup
Pad Thai Sauce - Sweet, sour, and savory blend for stir-fried noodles
Tom Kha Paste - Creamy and citrusy for coconut-based soups
Massaman Curry Paste - Mild, nutty, and warm spice flavor
Many More Traditional Thai Flavors Available
Key Features:
Authentic Thai Taste with Global Appeal
Easy-to-Cook Sauce and Paste Formats
Ideal for Restaurants, Retail, Meal Kits, and Home Cooking
Premium Ingredients, No Artificial Preservatives
Long Shelf Life and Convenient Storage
Attractive Packaging for Retail or Private Label (OEM Welcome)
Packaging & Delivery:
Pricing Terms: FOB Thailand
Price Range: USD 3.00 -10.00 per unit (based on SKU and order volume)
Minimum Order Quantity (MOQ): 10,000 units
Packaging Options: Retail-ready, bulk, or customized OEM/Private Label
Why Choose De Siam Thai Sauces?
Trusted Thai Brand with International Presence
Authentic Recipes Developed by Thai Culinary Experts
Consistent Quality and Flavor Profile
OEM/Private Label Solutions for Global Retailers
Year-Round Production and Export Capacity
Contact Us for Product Catalog & Wholesale Pricing
Partner with KHUMSUB to distribute or source premium Thai sauces from De Siam. Request a detailed quotation and free samples today to experience the taste of Thailand in every bite."
Keywords : Sauces, Thai Sauces, Thai Curry
MOQ : 10,000 Pcs
Place Of Origin : Thailand
Brand Name : De Siam
Type: Floor Boughpot, Flower Kettle/Sprinkler, Flower Tub, POTS, Pergola, Propagator Kits, Small Fence, VASE, Flower Basket, PLANTER
Usage Condition: FLOOR
Style: Classic
Used With: Artificial Flower
Place of Origin: Ho Chi Minh City, Vietnam
Material: Natural Bamboo
Finishing: Not Coated
Usage: Home Garden Decoration
Name: KISHO X-02 Maintain agent for glass coating layer
Dosage: 25 ml per pallet
Price: one liter to do 40 car or so
product ingredient: silicone resin
Product Feature
1 After plating the crystal construction, in the initial hardening of the film after the use of crystal curing agent, can effectively avoid Avoid the rain, and play a role in the protection film plated crystal hardening stage;
2 After plating crystal construction, brightness and water allocation effect will be reduced according to the use of the car,When can the construction plated crystal curing agent, to supplement the paint and brightness of the water repellent effect.
Product Specification / Models
Name: KISHO X-02 Maintain agent for glass coating layer
Dosage: 25 ml per pallet
Application
After wiping the body, the plating crystal curing agent is sprayed onto the wet towel to dry the wet towel.Alternating vertical coating, and then dry towel polishing, complete a layout of the construction
Other Information
To avoid high temperature and frozen storage; avoid direct sunlight; please do not put Save in the vehicle.
JH Glass shower door is produced with several types of raw glass. The current modern design trend has given us more choice on glass types, colors, and patterns. Shower door glass is made by tempered glass, with excellent drilling, cutouts, polished edge.
Products series :
Tempered clear glass
clear glass is the most ordinarily used option for shower enclosures, low cost and easy clean
Tempered raindown/nashiji pattern glass
The pattern bring distinctive decorative on glass surface
Let the glass in high opacity ,guarantee a higher level of privacy
One side of the glass is patterned ,and the other side is flat for easier cleaning
Tempered acid etched glass/ gradient change glass
Processed on base of acid etched glass
The opaque and satin surface bring artistic effect
Gradient change is an interesting new decorative products ,and rapidly accepted by modern shower door designs.
Tempered low iron glass
High light transparent with colorless appearance
The glass blue edge makes the whole shower enclosure in high grade
Tempered glass with anti-limescale coating
For preserve the functional and aesthetic properties of shower glass , JHG offer coated glass for avoid damage caused by water sediments.
4687 Kisho Deluxe Glass Coating Kit Suppliers
Short on time? Let Kisho Deluxe Glass Coating Kit sellers contact you.
