1.Quality case material ,durable and anti-fall.
2.strong,beatand fall resilient metal housing.
3.Rubber soft handle for more comfortable use.
4.Low vibration for easy use
1.Quality case material ,durable and anti-fall.
2.strong,beatand fall resilient metal housing.
3.Rubber soft handle for more comfortable use.
4.Low vibration for easy use
MODEL RJS-60
Voltage 235V AC
Frequency 50Hz
Rated Input Power 600W
Strokes Length 26mm (1")
Strokes Per Minute 500-3000 spm
Cutting capacity 60mm
Full Load Current 2.55A
Approx Weight 2.50kg
Application Straight cutting idea for epoxy hardwood softwoodlaminated boards insulated and heat insulation meterials and plasticProduct title: T119A Milled and wavy set teethMilled and wavy set teeth: Teeth milled, wavy setBlade for fine, straight cutting results into plywood, soft steel, aluminium, non-ferrous metals and plasticsHCS: Carbon steel for use with softer materials such as softwood,wood fibreboards and soft plastics
Jig is one of the relative new methods for gravity concentration. As a rougher or cleaner device, it is widely applied on the separation of gold, tin, tungsten, titanium, hematite, coal and other minerals due to its high processing capacity, large range of separation size and simplicity of operation and maintenance.
Sawtooth wave jig is a new type of jigs,It is one of the types of modern gravity separation equipment. New it has formed series whose use is expanded. Such type of jig uses electromagnetic stepless speed regulation which features even rotation, smooth ore current, strong adaptability to selected materials, good separation effects of medium and fine grains, and water saving.
Sawtooth wave jig is a energy-saving gravity concentration device which is based on the traditional jig according to the distribution rule of jigging bed theory, its jig pulse curve likes the saw-tooth waveform which makes the upward flow faster than the downward; the upward flow time is short, the downward is long, which overcomes the shortcoming of upward flow, downward flow and action time produced by the sine-wave pulse curve, enhances the loose degree of the bed and alleviates the inhalation effects, then the heavy mineral particles in the ore are fully settlement, which enhances the sorting ratio and recovery of equipment. Compared with the sine-wave jig, the recovery of Sn increases 3.01%, W: 5.5%, Pb: 1.63%, Zn: 2.04%, respectively; water consumption is reduced by 30%-40%, site area is decreased 1/3, the stroke can be adjusted, dragging by the electromagnetic adjustable speed motor makes the pumping speed can be adjusted endlessly. Its performance reaches the domestic advanced level, it is one of the ideal energy-saving gravity concentration equipments.
Features:
High quality ,precision manufacturing
High capacity, high recovery ratio,
Widely use range, large range of separation size,
Energy conversation, no pollution
Simple installation and easy to maintenance
The work safe and reliable, long working life
Technical Parameters
Model
JT1-1
JT2-2
JT3-1
JT4-2
JT5-2
Jigging machine belongs to gravity-based equipments, which can separate mineral based on differing of specific gravity. Gandong saw-tooth wave jig is mainly consist of three parts: main frame, driving set and jigging chamber.
Application
Jigging machine is widely used in gravity concentration of tin, tungsten, placer gold, hematite ore, manganese, titanium, antimony, lead, tantalum, niobium and other minerals.
Features
The pulsing curve of the traditional jig is sinusoidal waveform, the up and down speed of water flow and acting time produced by the movement of membrane are almost same, so it is unfavorable to loose of jig bed and layering of minerals based on special gravity, and thus affect separation ability and recovery rate. Saw-tooth wave is energy economy gravity equipment that is developed and improved from traditional jig on the basis theory of jig bed layering. Its jigging pulsating curve is similar to saw-tooth wave, which makes the up speed of water flow quicker than down speed of water flow, so it can improve looseness of jig bed and reduce suction action, which can lead to fully settlement of heavy particles in slurry, it highly improves separation ability and recovery rate. Stroke and frequency of stroke are adjustable.
700mm Petrol Log Saw Features:
Durable and efficient log saw power by 13Hp Gasoline engine with electrical starter,
This petrol log saw comes with 700mm diameter TCT blade size can cut timber up to 230mm diameter
Compact structure enables lasting service
The blade on this log saw is fully covered and guarded for safe operation
High mobility and easy to transport with big wheels
Note: Do not put too short logs on the machine to cut.
Main features:
1. You can choose to use a single saw or a double saw for product stability, or a single saw for unstable products
2. Ensure the hygiene of the meat and ensure a smooth cutting surface
3. Waterproof design for quick cleaning
4. According to different uses, frozen meat, lamb chops, steak, fish
5. Adopting human-machine interface and intelligent operation panel
6. 30 sets of memory functions can be set
7. Feeding adopts servo motor, with high precision
8. The conveyor belt can be removed for cleaning
Paramters :
cutting thickness 1-50mm ,material thickness under 15cm .
capacity 8-15times/min ,can adjustable.
Fully automatic reciprocating double-sided saw bone machine,fully automatic bone cutting machine
Main features :
1.You can choose to use a single saw or a double saw for product stability,
or a single saw for unstable products .
2.Ensure the hygiene of the meat and ensure a smooth cutting surface
3.Waterproof design for quick cleaning
4.According to dfferent uses ,froze meat ,lamb chops, steak ,fish
5.Adopting human-machine interface and intelligent operation panel
6.30 sets of memory functions can be set
7.Feeding adopts servo motor ,with high precision
8.The conveyor belt can be removed for cleaning paramters :
cutting thickness: 1-50mm, Material thickness under 15cm .Capacity 8-15times/min
Parameters:
Reciprocating double-sided saw
Machine size 1620*1550*1720mm
Working table size 500 *600mm
By height 300mm
Dimensional accuracy: ±1mm
Maximum cutting height: 300mm
Sawblade line speed: 44m/s
Saw blade specification: 3250mm
Voltage: 380V/50HZ
Power: 3.95kw
Air pressure: 0.8MPa
Machine weight: 500kg
