Code 86310: Cannula fixation and injection plaster. Non-woven adhesive dressing with absorbent pad
Features
1. Sterile and adhesive as required for firmly securing cannulas used for hypodermic injections.
2. Laid on a non-woven hypoallergenic backing to be fitted with a central pad which facilitates the introduction of the hypodermic needle.
3. Waterproof but air permeable-shielding out water, dirt and germs.
I.V. Cannula with Injection Port
Product Code: MED 158
Specifications: Sterile, individually packed in peelable blister pack
Size/Strength: 14 G, 16 G, 17 G, 18 G, (45 mm), 20 FG(32 mm), 22 FG (25mm), 24FG, 26G (19mm)
Description
PTFE Cannula has smooth surface for non-traumatic intubation.
Formulated Cannula tip to facilitate less traumatic penetration.
Super sharp Needle with two cutting edges.
Provided with Injection port with non-return valve for extra
Medication.
IV Cannula without Injection Port & without Wings
Product Code: MED 161
Specifications: Sterile, Individually Packed in Peelable Blister Pack
Size/Strength: 14G, 16G, 17G, 18G, (45mm), 20FG(32mm), 22FG(25mm), 24FG, 26G (19mm)
Description
Siliconised stainless steel back cut needle for easy and painless vein puncture.
Made of Biocompatible FEP material has smooth outer surface.
It allows quick visualization of venous return.
Soft and Transparent Needle Cover to prevent accidental damage to needle or catheter
3912 I V Cannula With Injection Port Suppliers
Short on time? Let I V Cannula With Injection Port sellers contact you.
1. Buyer issues an official ICPO with the seller's procedure, passport copy, banking details along
with their Tank Storage Agreement "TSA".
2. Seller issues their Commercial Invoice "CI" to the buyer, Buyer signs and returns the commercial
invoice to the seller along with an Acceptance Letter of the sales and purchase procedure.
3. Seller verifies the buyer's storage facility and their Tank Storage Agreement (TSA) with the port
authority. (NB: Seller will issue a Tank-to-Tank Injection Agreement (TTIA) to be signed by all
parties only if buyer's TSA is engaged, not active or cannot be verified with the local port
authority).
4. Seller issues all POP documents below to the buyer upon a successful verification and approval
of the buyer TSA or after receiving the TTIA fully signed by all parties:
a. Injection Report.
b. Product Passport.
c. 24 Hours SGS Report.
d. Product Certificate of Origin.
e. Tank Storage Receipt (TSR).
f. Authorization to sell and collect.
g. Unconditional Dip-Test Authorization.
h. Product Title Holder Transfer Agreement.
i. NCNDA/IMFPA.
5. If required buyer may inspect by SGS (Dip Test In Tanks) at buyer's expense.
6. Upon successful verification of POP or Dip Test in the seller's tank, buyer provides Tank Storage
Receipt (TSR) to seller in order to issue the scheduled Injection Programming (IP) to be signed by
buyer storage facility and then injects the product into buyer's tanks.
7. Buyer makes the payment for the product via MT103, seller transfers the Title Holder &
Ownership of the product to the Buyer.
8. After successful Trial Lift (First Lift), Seller issues SPA/Contract for 12 months with R&E to
Buyer for processing.
9. Seller pays commissions to all intermediaries involved, for the initial lift and all subsequent lifts
according to the signed NCNDA/IMFPA.
TRANSACTION PROCEDURES FOR FOB JURONG/QINGDAO PORT TANK TO TANK (TTT)
1) Buyer issues ICPO and certificate of incorporation
2) Seller issues Commercial Invoice (CI) , buyer's signs and returns to Seller with his TSA, Seller verify buyer TANK FARM and make 3days tank lease payment to the buyer tank farm for the Injection Process.
3) Buyer pays his Tank Farm Company for 2 days tank storage costs, after his Tank Farm Company has received the buyer's payment the Seller Company pays 3 days cost (totaling) 5days TSR
4) Seller inject into buyer tank and issues SGS, ATV and Unconditional DTA.
5) Buyer conducts Dip Test and makes the payment for the total value of product injected TRANSACTION PROCEDURES FOR FOB JURONG/QINGDAO PORT TANK TO TANK (TTT)
1) Buyer issues ICPO and certificate of incorporation
2) Seller issues Commercial Invoice (CI) , buyer's signs and returns to Seller with his TSA, Seller verify buyer TANK FARM and make 3days tank lease payment to the buyer tank farm for the Injection Process.
3) Buyer pays his Tank Farm Company for 2 days tank storage costs, after his Tank Farm Company has received the buyer's payment the Seller Company pays 3 days cost (totaling) 5days TSR
4) Seller inject into buyer tank and issues SGS, ATV and Unconditional DTA.
5) Buyer conducts Dip Test and makes the payment for the total value of product injected into the tanks through the means ofMT103-
6) Seller pays all intermediaries involved in the transaction, and subsequently monthly shipment continues as per terms and Conditions of the sales and purchase agreement contract between buyer and seller .
EN590 FOB TTV Seller Procedure
Origin : Kazakhstan
Loading port: Singapore port
UNIT PRICE : USD 490/MT
PAYMENT TERMS : MT103
TRANSACTION TERM : FOB
1. Buyer accepts seller working procedure and issue ICPO
2. Seller's issues commercial invoice (CI), Buyer signs and returns back commercial invoice.
3. Seller issue TSR with GPS coordinate to Buyer Company,
4. Buyer contacts the Seller's storage facility for tank extension to enable Buyer approval to gain access to the facility and execute the Quality & Quantity Inspection in Seller Tank Farm for FRESH Analytical Report/Result by SGS. ( Note* One day extension fee is 78,000 usd and will be deduct when buyer is paying total amount )
5. After successful DIP test, (NCNDA/IMFPA) will be signed by all parties.
6. Seller injects product into Buyer's vessel or injects into Buyer's tanks Buyer or buyer take over the storage tanks, within maximum 48 hours Buyer pays via MT 103/TT for the spot transaction and seller issues all export documents to buyer.
7. Upon conclusion of first lift transaction seller pays all intermediaries involved in the Transaction and proceeds with the signing of contract with Buyer.
EN590 10ppm & Jet Fuel A1 available .Tank to Tank procedure :
TRANSACTION PROCEDURES FOR FOB â??TTTâ??
(TANK-TO-TANK)
1. Buyer issues ICPO together with tank storage agreement (TSA) for
seller approval.
2. Seller issues Commercial Invoice (CI), ICC WARNING LETTER for the
available product quantity in the
storage tank in the terminal port.
3. Buyer signs and then returns the commercial invoice with NCNDA/IMFPA
signed by all buyer Groups
with commission structures.
4. Seller Issue (3 DAY unconditional Dip Test Authorization (DTA) to be
endorsed by Sellerâ??s Company,
Buyerâ??s Company and Buyerâ??s chosen Logistic Company. Upon confirmation
of the signed unconditional
Dip Test Authorization (DTA) by both parties, Seller programs the
injection and then issues buyer the
following documents.
A.FRESH SGS REPORT INSPECTED IN LOADING TERMINAL PORT.
B.TANK STORAGE RECEIPT (TSR) WITH GPS COORDINATES).
C.AUTHORIZATION TO VERIFY (ATV).
D.INJECTION REPORT SHORE TANK.
E.CERTIFICATE OF ORIGIN.
F.AUTHORIZATION TO SELL & COLLECT (ATSC).
5. Buyer upon physical verification of the product and PPOP
confirmation, contracts SGS to conduct the
Dip test in Seller Storage Tank on Buyerâ??s expense.
6. Upon successful Dip Test, Buyer presents the tank storage receipt
(TSR).
7. Seller commences injection immediately into buyer tank and â??issues
buyer Title of Ownership
Certificate to be followed by all export Documentation.
8. Buyer makes payment by MT103 or TT wire transfer for the total
product and lifts the product, andseller pays all
intermediary involved in the transaction
EN590 ULSD available in Major Ports for FOB shipping terms, Kazakhstan Origin,
EN590 FOB price is $470/mt including $10 commission to buyer's side.
FREE ON BOARD (FOB) PROCEDURE
1. Buyer Issues ICPO:
The buyer submits an Irrevocable Corporate Purchase Order (ICPO) with banking details and passport information.
2. Seller Issues Commercial Invoice (CI):
The seller sends a Commercial Invoice (CI) for the available product, which the buyer countersigns.
3. Seller Provides POP Documents:
The seller provides Proof of Product (POP) documents, including:
SGS Report
Tank Storage Receipt (TSR)
Product Analysis
Injection Report
Authority to Verify (ATV)
Refinery Commitment Letter
Authorization to Sell and Collect (ATSC)
4. Buyer Verifies POP:
The buyer contacts the tank farm to confirm product availability.
5. Payment & Dip Test:
The buyer pays for a 5-day tank lease, and the seller issues an Unconditional Dip Test Authorization (UDTA). The tank farm provides a Clearance Access Entrance Permit (CAEP) for the dip test and SGS report.
6. NCNDA/IMFPA Signed:
All intermediaries sign the NCNDA/IMFPA and send it to the seller for endorsement.
7. Sealing & Final Payment:
After a successful dip test, the buyer requests tank sealing. The buyer pays for the full product via MT103/T/T and extends the tank lease for 48 hours.
8. Payment to Intermediaries:
The seller pays the intermediaries within 48 hours of receiving payment
We have plastic injection molding machine for Sale
Please follow the specifications :
Model Year : JUNE 2017
Clamp Tonnage : 10800 KN
MODEL NO. : IA10800II
POWER : 181.8 KW
POWER SUPPLY: 380 V, 60Hz
Bauxite is a soft, whitish to reddish-brown rock consisting mainly of alumina-bearing hydroxides, oxides of iron, silicon and titanium with impurities of Ca, Mg, Cr, V, P, Ga and other elements. Raw Bauxite is a major source of aluminium. Basic alumina containing minerals of Bauxites are gibbsite Al(OH)3, Boehmite g-AlO(OH) and Diaspore a-AlO(OH). We are a major Raw Bauxite Exporter based in Maharashtra (India) and catering to the diverse demands of several middle and eastern Asian countries.
About Raw Bauxite:
The processing of Raw Bauxite is done at a number of alumina refineries in the world. Bauxite can be processed at a low-temperature autoclave digestion (145 oC to 155 oC). Raw Bauxite can be used also for sweetening stage and for non-autoclave digestion in agitators (105 oC).
About 85% of bauxite mined worldwide is used to produce alumina for refining into Aluminium metal and the balance 15% is processed and value added to make its way to other uses like refractory, chemical, cement, abrasives, etc. Aluminium is possibly the most versatile product with applications in almost every industry. Since Bauxite is the primary source for Aluminium there will always be an ongoing promising demand for the same.
Application & Uses of Bauxite:
Raw Bauxite is successfully used for metallurgical grade alumina production besides applications in the cement industry, alumina chemical, steel, alum, energy industries, flame-retardants, etc. Bauxite is used in :
- Aluminium
- Cement
- Chemical
- Blast Furnaces
- Iron/Steel Ladles, etc.
Advantages of Artha Bauxite:
Artha Mineral Resources has good sources for Gibbsitic Bauxite which requires low digestion temperature (145 oC -155 oC) making it more economical to process. Mines are also in close proximity to all-weather ports which makes it very convenient and cost effective to ship this material.
E,Commission Structure
1-$ 20 Starting from you
2-Can mark up 60%/ 40% Buyer /Seller
F:Quantity 1M-50M X12 month
G-Great advantage of the project
1-NO REDACTED PASS PERFORMNCE &SGS
2-2-3M /MT OTG AVAILABLE
3-U.S. law firms fully cooperate
4-Provide some Q88 not Redacted files
5-High-quality sugar, the price is seriously below the market price,
6-Provide a complete manual and a full set of relevant information
H-SOP:
1,NCNDA, ICPO ,KYC
2,Draft SPA
3,SPA Signed & IMFPA Signed
4,ZOOM CALL FOR PASS PERFORMANCE &BOL-SGS -Q88-Video Share
5,PAYMENT TERM :LC /TT/BG/SBLC -
6,Payment Term
1-DLC CIF then Release TT
2-SBLC /BG DDP PAY TT
Seller refund issye fee &pay 5% Performance Bond to Buyer after verifiction
3-TT PAYMENT -Up front 5% -buyer offer Q88 and ALL SGS BOL information
7-inspection pay buyer port /warehouse
8-Rolls & Extensions
I-Notice-
I-Seller/Title -ABO INTERNATIONAL LTD /Brazil Si GROUP
Price valid time: Starting from May 29, the price will start to change after a week
E,Commission Structure
1-$ 20 Starting from you
2-Can mark up 60%/ 40% Buyer /Seller
F:Quantity 1M-50M X12 month
G-Great advantage of the project
1-NO REDACTED PASS PERFORMNCE &SGS
2-2-3M /MT OTG AVAILABLE
3-U.S. law firms fully cooperate
4-Provide some Q88 not Redacted files
5-High-quality sugar, the price is seriously below the market price,
6-Provide a complete manual and a full set of relevant information
H-SOP:
1,NCNDA, ICPO ,KYC
2,Draft SPA
3,SPA Signed & IMFPA Signed
4,ZOOM CALL FOR PASS PERFORMANCE &BOL-SGS -Q88-Video Share
5,PAYMENT TERM :LC /TT/BG/SBLC -
6,Payment Term
1-DLC CIF then Release TT
2-SBLC /BG DDP PAY TT
Seller refund issye fee &pay 5% Performance Bond to Buyer after verifiction
3-TT PAYMENT -Up front 5% -buyer offer Q88 and ALL SGS BOL information
7-inspection pay buyer port /warehouse
8-Rolls & Extensions
I-Notice-
I-Seller/Title -ABO INTERNATIONAL LTD /Brazil Si GROUP
Price valid time: Starting from May 29, the price will start to change after a week
