This machine adopts hydrocylinder underneath type, the assembly key of oil-fountain-oil-pump motor setíóflooding valveíóchange-direction valve are the brand products, the computer measure display of amplifier is ourselves produce, in good interface. It can display test forceíótest force peak valueíóloading speed. It according with the requirements of the standard of< GB/T228-2002 Metallic materials- Tensile testing at ambient temperature>,it used do tensileíópressureíóbending and cutting for metal and non-metal materials.
Main Technical Parameters:
Max. test forceú¦ 1000kN
Scope of test force measureú¦4-1000kN
Accuracy of measure test forceú¦í+1%
Journey of piston ú¦ 250mm
Max. journey speed of pistonú¦50mm/min
Displacement measure distinguishú¦ 0.01mm
Deformation measurementú¦Four-shelves measure, each shelf full measuring span of 20%, í+0.5%FS
Max.tensile spaceú¦750mm (Include piston journey)
Max.pressure spaceú¦ 580mm
Thickness of flat specimenú¦ 0-40 mmú+
Dia. Of round specimenú¦ ª¦13-ª+60mm
Size of platenú¦ ª+160mm
Distance of bending testing rollsú¦60mm-700mm
Width of rollsú¦ 140mm
Beam travels speed about: 120mm/min
Mode of clampú¦Hydraulic pressure clamp
Size of outlineú¦ 1000í-700í-2350mm
Application:
For static and cuasi-static test (low frequency fatigue) for high loads in many types of tests. Specially indicated to switch test mode, thanks to its dual space design.
Double test space frame:
With high structural stiffness,4 columns and 2 screws with double testing space
The upper space is intended for tensile tests, and the lower for compression, shear, bending, folding, etc.
Manufactured according to Standards EN 10002-2; ASTM E4, ISO 7500-1; DIN 51221 and BS1610 guide. Mobile crossbar separates the two test zones and is positionable in height by means of two spindles driven by an integrated electric motor frame.
PRSM-4001 Frame for 600 kN Hydraulic Universal Testing Machine
PRSM-4002 Hydraulic Grips Jaw Faces Set for Round Specimens
PRSM-4003 Hydraulic Grips Jaw Faces Set for Flat Specimens
PRSM-0500 Extensometer for Universal Testing Machine, 50 mm Gauge Length (Accuracy 0.01 mm),
PRSM-0510 Extensometer for Universal Testing Machine, 100 mm Gauge Length (Accuracy 0.01 mm)
PRSM-0520 Extensometer for Universal Testing Machine, 50 mm Gauge Length (Accuracy 0.001 mm)
PRSM-4000 Universal Hydraulic Tensile Test Machine is designed to test the ferrous materials for structural values such as yield strength and tensile strength. Apart from tensile tests, Universal Test Machines can also be used for compression tests up to the capacity of the machine.
Maximum security is maintained on 600kN capacity Universal Test Machine by limit switch on the lower grip and piston as well as the safety check valves on the hydraulic system. Hydraulic power unit works silently.0-40 mm flat and 8-32 mm round samples can be tested with a user friendly hydraulic jaws that comply with standards.
Load cell is used for load measurements. Strain measurement is done by the electronic displacement transducer built in the machine if required external extensometer fitted to the specimen also can be used for strain measurement. Strain measurements can be done directly from the extensometer fitted to the specimen.
Tests can be done fully automatic by digital control unit or computer. Machine complete the test with the set pace rate and turns to start position automatically.
PRSM-4000 Hydraulic Universal Testing Machine, features two test spaces for tension tests and compression tests. User can quickly change between tension and compression testing without having to remove heavy fixtures. This flexible design also helps to ensure safety, reduces operator effort and improves productivity.
The distance between the grips can be set by motor driven hand set system. With open front hydraulic wedge grips user can load specimen easily.
The universal testing machine can test multi types mechanical strength of metal or non-metal material, it mainly can test tensile, compression, bending strength. Normally the max loading is 300kn, 600kn, 1000KN. Hydraulic driven, digital display, manual oil control, test report print output.
This testing machine adopts a column structure, uses hydraulic loading (computer directly controls the loading speed or rate), and the computer displays the test results. It is convenient to operate and the test readings are accurate and reliable. It can be used for general steel, bolts, anchoring agents and other metal materials. Tension, compression, bending and shear tests, as well as compression and bending tests for general materials, plastics, cement and concrete.
Parameters WEW-100
Accuracy 1% of indicated value
Measuring range of force(kN) 2-100kN
Subsection of force 1,2,5,10
Accuracy of deformation measurement 0.5%F.S
Clamping diameter for round specimen(mm) ;6-22
Clamping width of flat specimen(mm) 40
Clamping thickness of flat specimen(mm) 0-15
Testing space Tension 550
Compression 500
Platen size 100
Distance of bending by pass roll(mm) 30-400
Piston stroke(mm) 250
Power supply : 50Hz
Working environment Room temperature : relative humidity
Overall dimension(mm) Frame machine730x500x2000
Control System 1070x810x1730
Weight(Kg) 1370
1. This machine adopts oil cylinder overhead (underneath) type structure, hydraulic load, hydraulic or manually clamping specimen.
2. The main machine is separated with ergo meter, connected by high-pressure oil pipe and wire, avoiding the influence of ergo meter degree when the specimen is breaking, which makes the value accurate.
3. Testing force indicator dial adopts closed type, which makes scale clear.
4. Loading speed indicator makes operation more convenient. It has three kinds speed: 0.4 rotor/min, 0.8rotor/min and 2rotor/min.
5. Automatic tracer is installed upright of ergo meter shell and can magnify the straining original shape by 2 or 4 times according to the requirements of test.
WAW Series Computer Controlled Electro-hydraulic Servo Universal Testing Machine
They are suitable to test various metallic & non-metallic materials for tension, compression, flexure, bending and shearing strength.
It is simple, easy to operate and widely used in works, laboratories and high schools for material properties R&D and quality control.
Equipped with computer as well as printer, it can display, record, process and print the test results and can draw test curves automatically in real time.
It is computer-controlled precision testing machine, suitable for extensive metallic & nonmetallic materials for tension, compression, bending, shearing and cycle test etc. It features high precision, high stability as well as high reliability. Equipped with PC system & printer, graph, test result display, data processing and printing can be done easily. Complete with modulus for metal, spring, textile, rubber, plastic and other material testing. It is widely used in many fields of R&D, QC and QA and education institutes.
The hydraulic enema/ sausage machine is the main equipment for processing intestinal products, which can fill all kinds of large, medium and small intestinal products. The machine is driven by piston type hydraulic pressure. Under the action of the hydraulic cylinder, the materials in the cylinder will be squeezed out after the pressure is generated by adjusting the working pressure. The upper part of the machine is equipped with a storage hopper and butterfly valve, which can realize continuous filling without lifting the cover and improve the working efficiency
Impact Testing System
They are accordance with International Standard ISO148-1983 & ASTM E23. & mainly used to determine the anti-impact capability of metal materials under dynamic load.They are the best testing equipment for many metal material manufactories, quality inspection departments and universities. The result will display on both digital screen and dial gauge.
JBW Series can Carry out the functions of clear zero and return automatically, capture the value of lost impact energy and pendulum cycle by means of setting up with computer program, and the result can be displayed, stored and printed out.
Our product is a high quality product made from imported oils and additives of best quality. It has a very good life and will give the best performance under the most critical conditions. It is available in 210 ltrs. Hdpe drum/ 26 ltrs. And 50 ltrs.
Multi-brand Hydraulic Oils ISO VG 15, 32, 46, 68 and 100. Available in Drums, pails, IBCc, Bulk.
