Spindle 240mm, hyperbolic heavy rocker, expand chuck, multi-point brake, hydraulic drive lifting, panning left and right on the middle.
Hydraulic mill roll stand Specification
The symmetrical structure can install two rolls of paper at the same time and continually change paper, paper roller clamp, lift-lower, loosen, movement, contraposition, translation etc.
Equipment was made of HT200-wide casting.
Maximum loading of one side arm 1500-2000kg
Each stand with two set track and trolley for carry paper.
Pneumatic braking
Electrical components are controlled centralized(domestic brank)
One set main motor power of hydraulic mill roll stand is 2kw, each arm power 1.5*4kw
YIKE GROUP Hydraulic mill roll stand Advantage
Hydraulic mill roll stand characteristic
Professional manufacturer
Economic cost
Durable working
Fast delivery
Good after service
Structural features
1.Adopt hydraulic drive to complete the paper clamping, loosen, remove for the medium, translation left and right and othersï¼?the lifting of the paper adopts hydraulic drive.
Hydraulic mill roll stand Specification
Symmetrical structure can install two rolls of paper at the same time and continually change paper, paper roller clamp, lift-lower, loosen, movement, contraposition, translation etc.
Equipment was made of HT200-wide casting.
Maximum loading of one side arm 1500-2000kg
Each stand with two set track and trolley for carry paper.
Pneumatic braking
Electrical components are controlled centralized(domestic brank)
One set main motor power of hydraulic mill roll stand is 2kw, each arm power 1.5*4kw
YIKE GROUP Hydraulic mill roll stand Advantage
Shaftless mill roll stand
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills.
It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color.
Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating.
From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list
In particular the mill scale can be classified as follows:
Einecs (european commission no.): 266-007-8
Waste code: 10 02 10
Basel code: b 12 30
Hs code: 2619.00
6117 Hydraulic Shaftless Mill Roll Stand Suppliers
Short on time? Let Hydraulic Shaftless Mill Roll Stand sellers contact you.
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
Focus-6100 butyl tapes are mainly made of butyl rubber with excellent performance in waterproofing and sealing.
Main Specification
(Customized size is acceptable.) 3.0mm thickness
* 12mm width *15m roll length
2.5mm thickness * 8mm width * 15m roll length
2 mm thickness * 15mm width * 20m roll length
2.5 mm thickness * 8mm width * 20m roll length
Main Color
black, grey, white
Technical Data
Product Series FOCUS-6100
Application Composite Materials Industry
Elongation 500%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h
Peel Strength 23N/cm
Tensile Strength 220KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet.
Advantages
Strong adhesion.
Wide application temperature range.
Excellent performance in waterproofing and sealing.
Applications
* During the production of vacuum extraction process for wind mill blade, it has excellent sealing property between vacuum bags and molds. During the production of vacuum extraction processfor fiberglass, it has excellent
sealing property between vacuum bags and molds.
* During the production of vacuum extraction process for cabin cover, it has excellent sealing property between vacuum bags and molds.
* As auxiliary materials, our Focus-6100 series are widely used in the production of wind mill blade, fiberglass, cabin cover, car tail bracket, automotive engine cover, yacht.
* Our products have excellent sealing property between vacuum bags and mold during the vacuum extraction process.
SVR3L is made from latex harvested from our rubber plantation. It can meet customer strict requirement about some of technicalities such as: the PO, Color (Lovibond), SVR3L is made from latex harvested from our rubber plantation. It can meet customer strict requirement about some of technicalities such as: the PO, Color (Lovibond),
Latex is preserved by ammonia or sodium sulfite. Then coagulated with formic acid, followed by shredding by passing through a rolling mill, washing system and hash.
SVR3L is made from latex harvested from our rubber plantation. It can meet customer's strict requirement about some of technicalities such as: the PO, Color (Lovibond), SVR3L is made from latex harvested from our rubber plantation. It can meet customerâ??s strict requirement about some of technicalities such as: the PO, Color (Lovibond), â?¦
Latex is preserved by ammonia or sodium sulfite. Then coagulated with formic acid, followed by shredding by passing through a rolling mill, washing system and hash.
After the crumb rubber is dried, it will be compressed into blocks and packed in polyethylene bags
1. The structure is double rotary shaft with four arms; Support two paper mill rolls on both arms at the same time.
2. Round-plate type manual brake, the web tension is adjusted at any time.
3. Arm Clamp and rotary structure set fixed torque clutch, operate safety.
4. Maximum paper roll diameter:¦Õ1400mm.
5. Maximum support weight: 2T.
Customizable solutions available, offering shaftless payoff stands in various specifications to meet specific client requirements
Product Overview:
The shaftless payoff stand is a highly efficient and flexible wire unwinding equipment featuring a centerless design. It is suitable for various materials including electric cables, fiber optics, and metal wires. With its intelligent control system and precision mechanical structure, it ensures stable and high-performance unwinding operations, significantly improving production efficiency and product quality.
Key Features:
Shaftless Design: Eliminates the need for traditional center shafts, compatible with spools of different inner diameters (500-1500mm) for quick changeover and reduced downtime.
Intelligent Control: Equipped with servo motor and variable frequency speed regulation system, offering adjustable unwinding speed (0-50m/min) with high precision and low error rate.
Stable Tension: Utilizes magnetic particle brake or pneumatic braking system to dynamically adjust tension, preventing wire slack or breakage.
Compact Structure: Lightweight design with small footprint, ideal for space-constrained production environments.
High Durability: Critical components made of premium materials with anti-wear and anti-corrosion properties for extended service life.
6117 Hydraulic Shaftless Mill Roll Stand Suppliers
Short on time? Let Hydraulic Shaftless Mill Roll Stand sellers contact you.
