HONGEN 1L/min Membrane Protable Oxygen Generator
HONGEN 1L/min Membrane Protable Oxygen Generator was designed in the way of portability with the reduction of weight to 870g, which highly reduced the weight and space consumption of the user. HONGEN 1L/min Membrane Protable Oxygen Generator was integrated with build-in battery which allow it to last up to 4 hours. The unique and simple portable design allow easier usage and portability for the user, which are best suitable for outdoor usage and travellers.
Specification:
1L/min membrane oxygen generator
Technical parameters:
ambient humidity: 5% RH
ambient temperature: -30 ~+40
Technical parameters: operating voltage: DC12
rated power: 10W
main engine weight: 870g
working noise: 42dB(A)
oxygen concentration: 90 + 3oxygen flow rate: 1(N)L/min
oxygen production principle:MAS membrane air separation
HONGEN 3L/min Membrane Protable Oxygen Generator
HONGEN 3L/min Membrane Protable Oxygen Generator was designed with a extra slim
concept with the reduction of weight to 1.3KG, which highly reduced the weight and space consumption of the user. HONGEN 3L/min Membrane Protable Oxygen Generator was also designed with LED Panel for easier control and display. Therefore, it was integrated with build-in battery which allow it to last up to 8 hours, to bring convenience for on the go usage. Nevertheless, it had been strictly manufactured based on a high quality foundation which makes them to maintain the enhanced quality, durability, performance and simplicity in mind comparing to the powerpluged Oxygen Generator. The design was specify on portable and durability best suitable for indoor and outdoor usage.
Specification:
Technical parameters:
ambient humidity: 95% RH
ambient temperature:-30 ~+40
Technical parameters: operating voltage: DC12
rated power: 15W
main engine weight: 1.3 kg
working noise: 42dB(A)
oxygen concentration: 90 +3 oxygen flow rate: 3(N)L/min
oxygen production principle:MAS membrane air separation
HONGEN 5L/min Membrane Oxygen Generator
HONGEN 5L/min Membrane Oxygen Generator was a smaller capacity design of Oxygen Generator,despite the smaller capacity design it was built upon a legacy of reliable,field-proven concentrator models. HONGEN 5 Liter Oxygen Concentrator was updated with enhanced quality, durability, performance and simplicity in mind.This robust oxygen concentrator offers just the right balance of cool and quiet. The designed was specify on slim concept to reduce the space consumption of the user and bring convenience to household, clinic and hostipal usage.
Specification:
Technical parameters:
ambient humidity: 95% RH
ambient temperature:-30 ~+40
Technical parameters: operating voltage: AC220 + 20V/50Hz
rated power: 50 W
main engine weight: 3.1 kg
working noise: 42dB(A)
oxygen concentration: 90 3+ oxygen flow rate: ï½?5 (N)L/min
oxygen production principle:MAS membrane air separation
HONGEN 10L/min Membrane Oxygen Generator
HONGEN 10L/min Membrane Oxygen Generator built upon a legacy of reliable,field-proven concentrator models. HONGEN 10 Liter Oxygen Concentrator was updated with enhanced quality, durability, performance and simplicity in mind.This robust oxygen concentrator offers just the right balance of cool and quiet. The designed was specify on slim concept to reduce the space consumption of the user and bring convenience to household, clinic and hostipal usage.
Specification:
Technical parameters:
ambient humidity: 95% RH
ambient temperature:-30 ~+40
Technical parameters operating voltage: AC220 + 20V/50Hz
rated power: 50 W
main engine weight: 3.6 kg
working noise: 42dB(A)
oxygen concentration: 90 + 3 oxygen flow rate: 10 (N)L/min
oxygen production principle:MAS membrane air separation
3287 Hongen 1L Min Membrane Protable Oxygen Generator Suppliers
Short on time? Let Hongen 1L Min Membrane Protable Oxygen Generator sellers contact you.
Oxygen Concentrator 0-10L/min hot sale manufacturer low noise self-cchecking oxygen-concentrator
Intelligent self-checking system with error code showing in LCD
Super low noise
24 Hours Continuous Working
Long lifespan of Molecular Sieves
Potassium Monopersulfate compound, a white, free flowing crystalline granule, is non-toxic, odorless, and easily soluble in water. It is an efficient, environmentally friendly, and multifunctional acidic oxidant.
General Information
Product Name Potassium Monopersulfate compound
CAS 70693-62-8
Chemical formula 2KHSO5 KHSO4 K2SO4
Molecular weight 614.7
Specification
Appearance White, free flowing granule
Available Oxygen, % 4.5
KHSO5, Â % 42.8
Loss on Drying  % 0.15
Bulk Density, g/L 0.80
pH (10g/L,25 C) 2.0 .4
Sieve Residue on 75 m test sieve, % 90.0
Packaging
Product is packaged in plastic woven bags lined with polyethylene film, with a net weight of 20kg/bag or 50kg, or the packaging form and net content can be determined through negotiation according to customer requirements.
Storage
Store in a cool and well ventilated warehouse to prevent exposure to sunlight, rain, and moisture. Prohibit mixing with reducing substances for storage.
Commodity:Sodium persulfate
Molecular Formula : Na2S2O8
Molecular weight : 238.13
Description
Sodium persulfate is a white,crystalline,odourless salt.It is used as initiator for the Polymerization of monomers and as a strong oxidizing agent in many applications.It has the particular advantage of being almost non - hygroscopic,of having a particularly good storage stability as a result of its extremely high purity and of being easy and safe to handle.
Transportation
Road/Rail transport : GGVS,GGVE,ADR,RID/CLASS 5.1 Sea transport : GGV Sea/IMDG code : CLASS 5.1 Page 5185,UN no.1505
Water hazards class 1(slight water hazard)
All information is given in good faith,but without warranty,since the conditions of use are outside our control. Verification by the user is recommended.Freedom from patent restriction cannot be assumed.
Package
(1) In 25kgs net multiple paper bags with one PE bag inner
(2) In 25kgs net PE bags
(3) In 25kgs net woven bags with two PE bags inner
(4) In 1000kgs net big woven bags with one PE bag inner
The above package is also with a pallet 1000kgs each.
Storage
NPS(SPS) is not combustible but assists combustion materials due to release of oxygen.Provided it is stored under appropriate condition.It must be stored dry in closed containers and protected from direct sunlight,heat and humidity.Impurities such as dirt,rust or traces of metal and reductants may cause catalytic decomposition.The product as supplied or in solution needs to be handled with appropriate care.The eye,skin and clothes must be protected when working with NPS(SPS) as damp powder or aqueous solution has a bleaching and slightly corroding effect.
Application
Polymerization : Initiator for the emulsion or solution Polymerization of acrylic monomers,vinyl acetate,vinyl chloride etc.and for the emulsion co-polymerization of styrene,acrylonitrile,butadiene etc.
Metal treatment : Treatment of metal surfaces(e.g. in the manufacture of semiconductors;
cleaning and etching of printed circuits),activation of copper and aluminium surfaces.
Cosmetics : Essential component of bleaching formulations.
Paper : modification of starch,repulping of wet - strength paper.
Textile : Desizing agent and bleach activator - particularly for cold bleaching.(i.e.bleaching of Jeans).
Others :
- Chemical synthesis
- Water treatment(decontamination)
- Waste gas treatment,oxidative degradation of harmful substances(e.g.Hg)
- Disinfectant
ITEMS SPECIFICATIONS
Appearance white crystalline salt
Assay 99.0% w/w min
Active oxygen 6.65% w/w min
Chloride and chlorate(as CL) 0.005% w/w max
Ammonia (NH4) 0.05% w/w max
Manganese(Mn) 0.0001% w/w max
Iron(Fe) 0.001% w/w max
Heavy metals(as Pb) 0.001% w/w max
Moisture 0.05% w/w max
Decomposition of the product as supplied at above 65C
Recommended storage temperature Normal Temperature
Storage stability as from date of delivery 12 months
HONGEN 5L Medical Oxygen Generator was designed in the way of slim and compact for easy placement, usage and ease of maintenance is perfect for care facilities and professional settings as well.
It's provided an advanced from the hospitals with surgical activities and intensive care units. It's produced a high and stable medical oxygen quality at 90% +/- 3%.
PARAMETER
- RATEED VOLTAGE/FREQUENCY : ~220V �± 10% / 50Hz �± 2%
- OXYGEN FLOW : The nominal pressure at the outlet is 0 and (0-5) L / Min at 70kpa, which can be adjusted continuously with allowable error is �± 10%
- OXYGEN CONCENTRATION PURITY : 90% �± 3%
- MAXIMUM OUTLET PRESSURE : Under the condition of rated flow, the maximum outlet pressure is 40kpa �± 10%
- DISCHARGE PRESSURE OF COMPRESSPR SAFETY VALVE : 250kpa �± 50kpa
- NOISE OF THE WHOLE MACHINE : â?¤50dB(A)
- MAXIMUM ATOMIZATION RATE : â?¥(). 1 mL/Min
- INPUT POWER : 400W
- DIMENSION : L*W*H 530 x 262 x 426mm
- NET WEIGHT : 15.0KG
- ELECTRICAL CLASSIFICATION : CLASS I TYPE B
- GROSS WEIGHT : 13.2 KG
- DEGREE OF PROTECTION AGAINST HARMFUL LIQUID : Common Equipment ( Closed Equipment without liquid Inlet)
- WORKING SYSTEM : Continuous Operation
- FUSE : R3-54B
HONGEN 10L Medical Oxygen Generator was designed to provide optimal oxygen delivery for patients with varying flow requirements. This is high performing compact oxygen generator, designed to supply for healthcare facilities with little or no access to medical oxygen, or for back-up supply in operation theaters and ICUs.
Descriptionï¼?
PARAMETER
- RATEED VOLTAGE/FREQUENCY : ~220V �± 10% / 50Hz �± 2%
- OXYGEN FLOW : In case of the normal outlet pressure is zero and 70kPa. It is continuously adjustable at (0-10)L/ Min and the allowable error is �± 10%
- OXYGEN CONCENTRATION PURITY : 93% �± 3%
- MAXIMUM OUTLET PRESSURE : Under rated flow conditions, the maximum outlet pressure is 40kpa �± 10%
- DISCHARGE PRESSURE OF COMPRESSPR SAFETY VALVE : 250kpa �± 50kpa
- NOISE OF THE WHOLE MACHINE : â?¤60dB(A)
- INPUT POWER : <750W
- DIMENSION : L*W*H 600*350*555mm
- NET WEIGHT : 35.7KG
- ELECTRICAL CLASSIFICATION : CLASS I TYPE B
- GROSS WEIGHT : 37.5KG
- CARTON SIZE - L*W*H 665*415*610mm
- PROTECTION AGAINST HARMFUL INGRESS OF LIQUIDS : Common Equipment ( Enclosed Equipment without liquid ingress preventing)
- WORKING SYSTEM : Continuous Operation
- FUSE : R3-54B
PHYSICAL APPEARANCE ASPECT
Agglomerate materials COLOR Gray blackish color
CHEMICAL BEHAVIOR
The basicity of the slag is normally fixed by the amount of lime and calcinated dolomite added, the silicon and aluminum levels of the hot metal and steel scrap charged as well as ferro-alloys.
Below present our general procedures for the purchase and sale of sugar of Brazilian origin:
1- Buyer issues a Letter of Intention (LOI) addressed to Seller;
2- Seller issues a Soft Corporate Offer (SCO);
3- If Buyer accepts SCO, signs and seals SCO and then sends to Seller;
4- Seller issues Full Corporate Offer (FCO);
5- Buyer signs and seals FCO and issues an Irrevocable Corporate Purchase Order (ICPO), addressed to Seller;
6- Seller issues draft of Sale and Purchase Agreement (SPA) to be discussed and commented;
7- SPA is signed by Seller and Buyer;
8- Buyer issues draft of the Payment Instrument (SBLC/DLC) for approval by Seller�´s Bank;
9- If Seller�´s Bank accepts, Buyer issues the bank guarantee (SBLC/DLC);
10- Seller issues Performance Bond (PB) 2%;
11- Seller prepares the product and export documents;
12- Buyer receives the export documents by mail;
13- Buyer makes payment 100% to Seller�´s Bank through transfer bank (Swift Message MT-103);
14- Shipping;
15- Seller sends the original export documents to Buyer;
NOTES:
The financial instrument (SBLC / DLC) must be issued by the Top 50 Bank in the world ranking.
About THE Product :
Blast furnace slag is used in the production of cement (iron Portland and blast furnace cement).
Air-cooled blast furnace slag is formed by allowing the molten slag to cool relatively slowly under ambient conditions; final cooling can be accelerated with a water spray. The cooled material is hard and dense, although it can have a vesicular texture with closed pores. After crushing and screening, air-cooled slag can be used in several applications.
Granulated slag is formed by quenching molten slag in water to form sand-sized particles of glass. The disordered structure of this glass gives the material moderate hydraulic cementitious properties when very finely ground into granulated blast furnace slag, but if it can access free lime, the granulated blast furnace slag develops strong hydraulic cementitious properties.
Pelletized or expanded slag is cooled through a water jet, which leads to rapid steam generation and the development of innumerable vesicles within the slag. The vesicular texture reduces the overall density of the slag and allows for good mechanical binding with hydraulic cement paste.
Blast Furance Slag is a nonmetallic co-product which is produced in the process of iron manufacturing, Granulated Blast Furnace Slag is a glassy granular material formed when molten blast furnace slag is rapidly cooled by direct water.
Rapid cooling prohibits the formation of crystals and forms glassy, non-metallic, silicates and alumino silicates of calcium.
GBFS : (Granulated Blast Furnace Slag)
Source : Granulated BF Slag From Gujarat State, India
Supply Quantity : 50,000 Metric Tons Per Month
Packing: Bulk
Parameters (% BY MASS)
CaO 30-38
Al2O3 15-20
SiO2 30-40
Glass Content 85-97
MgO 8-11
Fe2O3 0.5-1.5
Moisture 10 MAX
Size -5mm Min 95, +5 mm Max 5
Relative Gravity 2.9
Bulk Density(Bagged) 1200 KG/M3
We offers Gypsum Rocks with various purity and sizes as per customer requirement.
Gypsum Rock extensively used as a raw material for manufacturing fertilizers, paints, construction materials. We make it available in bulk in chemical-grade packaging. We produce sized natural Gypsum with purity MIN 90% percent that general usage in cement industry and Gypsum factories. Application Use to manufacturer gypsum panel and building plaster Use for Gypsum Boards and ceiling boards Use to make Gypsum Powder (Plaster of Paris) Use to manufacturer cement.
We can offer Gypsum Rocks , Gypsum Powder, Gypsum Crystal from Iran Natural gypsum rocks, Gypsum Powder mesh 150/200, Gypsum Satin Plaster / Siva Plaster.
meatball process line / machine meatball shape machine,meatball production line
The meatball forming machine adopts continuous output meatball system, which has high production efficiency, and is equipped with knives and shapers of different caliber, which can be replaced at will according to the requirements of users. The machine is mainly used to produce chicken balls, fish balls, shrimp balls, pork balls, beef balls, mutton balls, donkey balls, vegetable balls, seafood balls and other products.
The main equipment of meatball production line includes meat planer, mincing machine, chopping and mixing machine, stuffing mixing machine, meatball machine, forming water tank, frying production equipment, etc.
The machine is small in size, light in weight, low in noise, beautiful and generous, durable, easy to operate and maintain, efficient and energy-saving. The meat (FISH) balls produced are of good quality, smooth appearance, good roundness and uniform size. The frame body is made of 3mm thick stainless steel by bending and welding, which is solid for internal use. Wear resistant brass is used inside and outside the outlet.
capacity 50-420pcs/min ,voltage 380V/50Hz .
Variable frequency regulation meatball forming machine /meatball process line / machine meatball shape machine,meatball production line
The meatball forming machine adopts continuous output meatball system, which has high production efficiency, and is equipped with knives and shapers of different caliber, which can be replaced at will according to the requirements of users. The machine is mainly used to produce chicken balls, fish balls, shrimp balls, pork balls, beef balls, mutton balls, donkey balls, vegetable balls, seafood balls and other products.
The main equipment of meatball production line includes meat planer, mincing machine, chopping and mixing machine, stuffing mixing machine, meatball machine, forming water tank, frying production equipment, etc.
The machine is small in size, light in weight, low in noise, beautiful and generous, durable, easy to operate and maintain, efficient and energy-saving. The meat (FISH) balls produced are of good quality, smooth appearance, good roundness and uniform size. The frame body is made of 3mm thick stainless steel by bending and welding, which is solid for internal use. Wear resistant brass is used inside and outside the outlet.
capacity 50-420pcs/min ,voltage 380V/50Hz .
meatball making machine meatball forming machine meatball process line/production line with frequency control and no-frequency control .
The meatball forming machine adopts continuous output meatball system, which has high production efficiency, and is equipped with knives and shapers of different caliber, which can be replaced at will according to the requirements of users. The machine is mainly used to produce chicken balls, fish balls, shrimp balls, pork balls, beef balls, mutton balls, donkey balls, vegetable balls, seafood balls and other products.
The main equipment of meatball production line includes meat planer, mincing machine, chopping and mixing machine, stuffing mixing machine, meatball machine, forming water tank, frying production equipment, etc.
The machine is small in size, light in weight, low in noise, beautiful and generous, durable, easy to operate and maintain, efficient and energy-saving. The meat (FISH) balls produced are of good quality, smooth appearance, good roundness and uniform size. The frame body is made of 3mm thick stainless steel by bending and welding, which is solid for internal use. Wear resistant brass is used inside and outside the outlet.
Capacity 50-500pcs/min ,meatball diameters : 16-40mm, above 40mm big size meatball can customized mould .
style 1: min. 90% of whole kernel above 17 mm; of which 15% >20mm;
style 2: min. 50% of whole kernel above 17 mm, and 50% of halves;
style 3: min. 15% of whole kernel and premium halves above 14mm;
style 4: min. 80% of halves between 9 and 15mm; less than 5% of wholes over 10mm;
style 6: premium pieces above 9mm.
- > other grades and styles may be available or produced to your needs on request.
packaging and shipping:
- > average moisture: 1. 5%
- > oxygen level: maximum of 3% of oxygen must be respected, in order to better preserve its content.
- > shelf life: raw kernel 18 months
style 1: min. 90% of whole kernel above 17 mm; of which 15% >20mm;
style 2: min. 50% of whole kernel above 17 mm, and 50% of halves;
style 3: min. 15% of whole kernel and premium halves above 14mm;
style 4: min. 80% of halves between 9 and 15mm; less than 5% of wholes over 10mm;
style 6: premium pieces above 9mm.
- > other grades and styles may be available or produced to your needs on request.
packaging and shipping:
- > average moisture: 1. 5%
- > oxygen level: maximum of 3% of oxygen must be respected, in order to better preserve its content.
- > shelf life: raw kernel 18 months
3287 Hongen 1L Min Membrane Protable Oxygen Generator Suppliers
Short on time? Let Hongen 1L Min Membrane Protable Oxygen Generator sellers contact you.
