Property Unit
Typical Value
Mass density g/cm 3 0.941-0.959
Melt flow Rate(190 centidegree /2.16kg) g/10min ¡Ü1.0
Tensile yield strength MPa ¡Ý19.0
Flexural modulus Mpa ¡Ý965
Elongation@ break % ¡Ý400
Impact Embrittlement temperature Centidegree MAX -118
Dielectric Constant 100KHZ 2.32
1MHZ 2.31
Loss Tangent 100KHZ MAX 0.0001
1MHZ MAX 0.0001
Volume resistivity OHM-CM MIN 1x10 15.
Application:
Mainly used for the production of high toughness of the telephone,cable insulation material.
Usage: :make plastics bottle and bag, make all kinds of pipes , make cable wire-insulating.
Pure and recycled plastic raw materials ( HDPE ), Pottery Products and agricultural crops such as potatoes, onions, oranges, lemons, white beans ........ etc.
A.Plastic Raw Materials:PVC,CPVC,PP,HDPE,LDPE & LLDPE,EPS ,GPPS,HIPS PET,ABS,PMMA,PC,PA66 etc
B.Plastic Additives:Tio2,Stearic Acid ,PE Wax,DOP, Lithopone ,Barium SulphateMasterbatch Series and Water treatment etc.
484242 Hdpe Raw Materials Suppliers
Short on time? Let Hdpe Raw Materials sellers contact you.
A.Plastic Raw Materials:PVC,CPVC,PP,HDPE,LDPE & LLDPE,EPS ,GPPS,HIPS PET,ABS,PMMA,PC,PA66 etc
B.Plastic Additives:Tio2,Stearic Acid ,PE Wax,DOP, Lithopone ,Barium SulphateMasterbatch Series and Water treatment etc.
EPS block scrap represents the versatile revival of foam. Once used in packaging and insulation, these recycled blocks find a new purpose, contributing to sustainability and reducing the environmental impact of foam waste.
P.S. (Expandable Poly Styrene) is a lightweight, rigid, plastic foam insulation material produced from solid particles of polystyrene. Expansion is achieved by virtue of small amounts of gas dissolved into the polystyrene base material during production. The gas expands under the action of heat, applied as steam, to form perfectly closed cells of EPS. These cells occupy approximately 40 times the volume of the original polystyrene bead. The EPS beads are then molded into appropriate forms suited to their application. Products made from foamed polystyrene are nearly ubiquitous, for example packing materials, insulation, and foam drink cups
Feature:
1,EPS(Expandable Polystyrene) ,White Polystyrene powder,EPS Resin
2,good preserving character
3,free sample and competitive price
4.Good flame-retardant, good frothing good preserving, good binding and low heat-conducting rate.Oxygen index over 30 (testing after 7-14 days flowing)
Application
This Flame retardant grade EPS can be used as building-materials, materials for heat preservation, thermal insulation and for packing precision instruments.
High quality Cosmetic Raw Materials aristoflex avc powder
Cosmetic Raw Materials Aristoflex AVC is used as a gelling agent for transparent systems and a thickening agent for oil-in-water emulsions.
Addition amount: recommended 0.5ï½?1.2%
Vitamin C derivatives
Product name Solubility Appearance
vitamin C water soblue white powder
SAP(Sodium Ascorbyl Phosphate) water soblue white powder
MAP(Magnesium ascorbyl phosphate) water soblue white powder
Tetrahexydecyl ascorbic acid /oil-soluble vitamin c /VC-Ip/CAS:183476-82-6 oil soblue liquid
3-O-Ethyl-L-ascorbic acid CAS:86404-04-8 water/oil soblue white powder
Ascorbic Acid 2 Glucoside powder (AA2G) water/oil soblue white powder
We have established business relationship with the system regularly customers in many markets during last time as: Egypt, Turkey, Pakistan, Spain, Germany, Russia, Romania, Korea, Malaysia, China, Argentina and so on. Not stopping here, we are still trying day by day to maintain and develop further in over worldwide. Since founding, 99 GOLD DATA continuous operation and ongoing development in the fields of exporting, production and associated processing.
A unit of natural rubber exporter have credibility with a large number of goods, category with a big manufacturer of natural rubber processing in Vietnam to supply to domestic and international. Supply of natural rubber for domestic manufacturing and export processing zones in the field of tires industries, conveyor belt, sport shoes, gloves, etc. With a staff of more experience and specialized knowledge in export trade business, has high professional level, always learning, updating and improving, 99 GOLD DATA has increasingly met the high requirements of market as well as customers in domestic and international.
MAKEND�° CBS 355E is a hydrogenated and fractionated Palm Kernel Oil based Cocoa Butter Substitute (CBS) with very sharp melting profile thus providing excellent mouthfeel.
PACKING:
20kg or 25kg cartons with PE liners.
SHELF LIFE:
Shelf life 12 months from date of manufacture, provided, product is stored in original unopen packing in a cool, dry and odour free area with ambient temperature not above 20�°C and below 60% relative humidity.
Cocoa butter substitutes (CBS) are vegetable fats used to replace cocoa butter in chocolate and confectionery products. They are typically made from lauric acid oils like coconut or palm kernel oil. A key specification for CBS is that they are not compatible with cocoa butter and are used to completely replace it. Specifics include a slip melting point of 33-35�°C, a maximum iodine value of 1.0, and a maximum free fatty acid content (as lauric acid) of 0.1%.
Physical and Chemical Properties:
Slip Melting Point: The range is typically 33-35�°C.
Iodine Value: A maximum of 1.0 (Wijs) is generally specified.
Free Fatty Acid (FFA): Maximum of 0.1% (as lauric acid).
Moisture and Impurities: A maximum of 0.1%.
Saponification Value: Typically between 240 and 260.
Color: Can be white or pale yellow.
Appearance: Should be white or pale yellow with a bland flavor and no odor.
Solid Fat Content: While not a universal specification, some patents mention solid fat content at various temperatures, for example, 35-60% at 10�°C, according to WO2013132284A1.
HDPE GRIND (REGRIND) From Crates Sorted Color And Mix Color In Big Bags.
Size 8-10mm. Injection grade. Post industrial and post commercial. Clean. No foreign bodies inside.
Can load in 1x40' HC container approx. 24 MT (10%)
Ready for shipment. Photos available upon request.
If you are interested kindly contact us for more information (price, available quantity etc.).
You are welcome to visit our company premises and supervise our materials.
Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
approx. 95% HDPE - approx. 5% PP GRIND (REGRIND) FROM CAPS MIXED COLORS IN BIG BAGS.
Size 8-10mm. Post commercial. Clean. No foreign bodies inside.
Can load in 1x40' HC container approx. 23 MT (10%)
Ready for shipment. Photos available upon request.
If you are interested kindly contact us for more information (price, available quantity etc.).
You are welcome to visit our company premises and supervise our materials.
Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
PP Grind (Regrind) From Crates Mix Color In Big Bags Scrap/waste.
Size 8-10mm. Injection grade. Post industrial and post commercial. Clean. No foreign bodies inside.
Can load in 1x40' HC container approx. 24 MT (�?�± 10%).
Ready for shipment. Photos available upon request.
If you are interested kindly contact us for more information (price, available quantity etc.).
You are welcome to visit our company premises and supervise our materials.
Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
PP/PE PELLETS FLOOR SWEEP MIX COLOR IN BIG BAGS.
Post industrial. Materials need washing.
Can load in 1x40' HC container approx. 26 MT (10%)
Ready for shipment. Photos available upon request.
If you are interested kindly contact us for more information (price, available quantity etc.).
You are welcome to visit our company premises and supervise our materials.
Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
- HDPE Regrind from 20 liters jerry cans white transparent color Available
20 tons
- HDPE Regrind from blue drums 200 liters Available 21 tons
- HDPE regrind from 20 liters jerry cans gray color Available 8 tons
Thanks for contacting us!
We are selling CFR term, Incoterms 2020. Payment term: 50% advance, balance against copy Bill of Lading
Could you please give us more details about your company and demand for us to offer you the suitable material?
1.What is your company name and address?
2.Have you imported this material before?
3.If yes, which is your port of destination and HS code which you use to import this material?
4.How many tons do you need per month?
5.Which grade and color are you looking for?
6.Do you prefer us to contact you via email or whatsapp, wechat, skype,..?
Item Test Condition Test Method Value Unit
Density ISO 1183 0.950~0.955 g/cm
MFR 190 C/2.16kg ISO 1133 1.7~2.5 g/10min
Tensile strength at yield ISO 527-2 24 MPa
Elongation at break ISO 527-2 >600 %
