Product Specification
Power Range : 1.0 HP to 2.0 HP
Operating Speed : 0 - 3100 RPM
DC Power Range : 900 Wp - 2000 Wp
DC Voltage Range : 70 Vmp - 110 Vmp
Head Range : 30 Mtr - 90 Mtr
Discharge Range : 8000 LPD - 30000 LPD
Type of Duty : S1
- Zero Running Cost
- Less Maintenance
- Eco-Friendly
- Simple Installation
- Pollution Free
Material Of Construction - Motor
Part Grade
Mechanical Seal : Graphite Ceramic
Motor Shaft : Stainless Steel
Motor Body Pipe : SS-304
Lower Hosing : Aluminum
Diaphragm : High Nitrile butyl rubber
Top Cap : Stainless Steel
Bottom Plate : Stainless Steel
End Cap : Stainless Steel
MATERIAL OF CONSTRUCTION SCREW (HELICAL) PUMP
Part Grade
Outlet : SS-304
Suction : SS-304
Outer Shell : SS-304
Rotor Screw : Stainless Steel
Stator : Rubber Coated Alloy
MATERIAL OF CONSTRUCTION â?? CENTRIFUGAL PUMP
Part Grade
Check valve housing : SS-304
Check valve : PC
Suction : SS-304
Outer Shell : SS-304
Impeller : POM
Bowl : PC
Pump Bush : NBR
Pump Sleeve : Stainless Steel
Pump Shaft : Stainless Steel
Coupling / Pump Couple : Stainless Steel
Salient Features
Highly efficient 3-phase water filled motor
- Easily rewindable
- Dynamically balanced design
- Extended life with flawless performance
- Thrust bearing : Carbon + S.S. material for High thrust load capacity
- 100% EC grade copper winding
- Presenting world 1st design (design registered 100% fully S.S.-304 investment casting pumps.
- Zero maintenance
- Superior performance
- Sand proof operation
- Highly efficient 3-phase water filled motor
Product Specification
Power Range : 1.0 HP to 20.0 HP
Operating Speed : 0 - 2890 RPM
Operating Frequency : 0 - 50 Hz
Input Solar DC Power Range : 900 Wp, 20000 Wp
Input Solar DC Voltage Range : 110 Vmp - 600 Vmp
Head Range : 30 Mtr , 220 Mtr
Discharge Range : 10000 LPD - 420000 LPD
Type of Duty : S1
material of construction - motor
Part Grade
Body Lock : Spring Steel
Stud Ring : M.S. (Zinc Coated)
Stator Stamping : CRNGO - M45 Silicon
Winding Wire : 100% EC Copper
Shaft : SS-420
Rotor Stamping : CRNGO - M45 Silicon
Copper Lamination : 100% EC Copper
Upper Housing : SS-304
Lower Housing : SS-304
Connection Piece : SS-304
Oil Seal : NBR
TB Set : Carbon + SS
Base : SS-304
Drain Plug : Brass
Couple Sleeve : Stainless Steel
Water Bolt : Brass
MATERIAL OF CONSTRUCTION PUMP
Part Grade
Suction : SS-304
Couple : Stainless Steel
Couple Counter : SS-304
Rubber Seal : NBR
Bush Seal Cover : SS-304
Bowl : SS-304
Impeller : SS-304
Key : SS-410
Bowl Bush : NBR
Bush : LTB-4
Middle : SS-304
Cap : NBR
Outlet : SS-304
Built for the podium and bred to win, the 2020 GP1800R is back and faster than ever.
Since its release in 2017, the Yamaha GP1800R SVHO has completely dominated the Australian and World Pro Stock race scene. Pro Stock racing, also known as the â??Manufacturers Classâ??, provides the best comparison of out-of-the-box performance of each manufacturers race ski offerings.
From short course to long distance offshore endurance racing, no other watercraft model has achieved as many victories as the GP1800R SVHO over the last three years.
Engine Type: 4-stroke, 4-cyl DOHC, 16-Valve, Super Vortex High Output Marine Engine
About uses of Monel400 alloy: various heat exchange equipment, boiler feed water heaters, pipelines, containers, pumps, valves, shafts, etc. in petroleum and chemical processing, seawater desalination equipment, salt production equipment, propeller shafts, gasoline and water tanks, etc.
Monel400 stainless steel pipe
Standard
Food Grade Sanitary Tube: JIS G3447, KS D 3585, ASTM A270, EN 10357(DIN 11850), AS 1528.1, ISO 2037(NF A49-249)
Industrial pipe: ASTM A312, EN 10217-7, GB / T 12771-2008, HG 20537.3
Drinking water tube: GB / T 19228
Mechanical tube: ASTM A554, EN 10296-2
Size
Outer Diameter Range: 9.5~2000mm
Thickness Range: 0.5~20mm (Size can be customized.)
Length: Up to 11.8 meters per piece.
Shape Section
Round, square, rectangular
Application
Sanitary tubing: for food processing industry, beverage industry, sugar mill and so on;
Heat exchanger tube: condenser, boiler, super heater, evaporator and so on;
Industrial pipe: for petroleum delivery, gas delivery, petrochemical industry, wastewater treatment, drainage system, and so on;
Mechanical tube: handrail, railings, balustrade, hence and so on.
Features:
1.Our stainless steel tubes pipes are treated by bright annealing, inside weld bead removing, precise polishing. The roughness of tubes could be under 0.3 m.
2.We have the non destructive testing ( NDT ), eg. online eddy current inspection and hydraulic or airtightness testing.
3. Thick welding, good appearance.The mechanical properties of tube could be tested.
4. And Our tubes are certificated by AD 2000-W0, PED 2014/68/EU, ISO 9001 : 2015.
5. Full material traceability is guaranteed during the manufacturing process.
6. Polished tube is supplied in individual plastic sleeves with capped ends ensuring optimum cleanliness.
7. Internal Bore: Tubes have a smooth, clean and crevice free bore.
Discharge Minimum 375 ml per stroke or 15 Ltr. / 40 stroke completed in 1 minute.
Static water level depth 20 - 40 meter
Stroke Length 125 mm + 4mm
Cylinder - Cast Iron or Stainless Steel or UPVC
Bore well Casing Size 100 NB to 150 NB
Connecting Rod - Mild Steel or Stainless Steel in 3 meter length
Rising Main Size 32 NB MS GI Riser Pipe or 38 mm x2mm SS Pipe or 40 NB UPVC Pipe with Coupler or 40 NB UPVC with SS Socket and Nipple in 3 meter length
Above Ground Structure (Pump Stand, Head, Handle, Water Tank etc.- (Mild Steel with hot dip galvanized)
Static water level depth 40 90 mtr
Stroke Length 100 mm + 4 mm
Discharge Minimum 300 ml per stroke or 12 Liter /40 stroke completed in 1 minute
Bore well Casing Size 100 NB to 150 NB
Cylinder - Cast Iron or Stainless Steel or UPVC
Rising Main Size 32 NB MS GI Riser Pipe or 40 NB UPVC with 3 piece Coupler or 40 NB UPVC Pipe with SS Nipple and Socket in 3 meter length
Above Ground Structure (Pump Stand, Head, Handle, Water Tank etc. -( Mild Steel with hot dip galvanized)
Connecting Rod - Mild Steel or Stainless Steel in 3 meter length
charge - 16.5 liter per minute in 40 stroke or 420 ml in one stroke
Static water lever - 20 meter to 45 meter
Stroke length - 225 + 6 mm
Pump Rod - it is either Threaded , Eye Hook type made of SS or MS or frp pump rod in 3 meter length
Riser pipe - UPVC (OD 63 mm x thickness 4.7 mm) in 2.9 meter or 3 meter
Above ground i.e. Head Box Handle front and Rear and Stand Assy.( Hot dip galvanized mild steel)
Cylinder Assembly - it is made of UPVC pipe with brass liner inside and plunger valve and foot valve either brass or nylon (Derlin)
Casing Pipe - 100 mm to 200 mm . Afridev hand pump can also used in Dug Wells
We supply all types of heavy machinery, equipment and materials for construction, infrastructure, production and manufacturing, mining, transportation, health care, energy, industrial and many more sectors..Trading company, import, export, air freight, sea freight, customs clearance, door to door services,.
Pakistan polymers is a large scale manufacturer of plastic bottles and jars , pet bottles and jars, hdpe bottles , plastic containers, plastic products, parts and components, dispenser pumps, fliptop and disc caps , juice, csd and water bottles, cosmetic bottles and jars. our annual production capacity exceeds 540 million bottles and 1.5 billion preforms..Injection molding services, custom plastic product/parts manufacturing
offshore plastic contract manufacturing
Handgel MEC 300 ml (Norwegian label)
Moisturising hand gel (70 % alcohol) in 300 ml transparent PET bottle with black glossy pump cap. Anti-bacterial hand sanitizer with soft fragrance: 0.3% fragrance with 0.05% aloe vera extract and 0.05% Vitamin E
Handgel MEC 300 ml (Swedish label)
Moisturising hand gel (70 % alcohol) in 300 ml transparent PET bottle with black glossy pump cap. Anti-bacterial hand sanitizer with soft fragrance: 0.3% fragrance with 0.05% aloe vera extract and 0.05% Vitamin E
This Fully-automatic WEB Bag Aseptic Filler | Bag in Box Aseptic Filling Machine is designed for aseptically filling spout-prepared aseptic bags with sterile fluids like natural juice, concentrate, vegetable juice, fruit syrup, fruit jam, magma beverage, dairy product and pharmaceutical. It features fully-automatic by employing PLC and touch screen control system. The whole process of continuous bags feed, sterilization, decapping, filling, capping, cutting apart from continuous bags and transiting to the conveyor can be completed automatically, no human operation required.
Features:
1) Continuous bags feed and fully-automatic.
2) Easy to use. The touch-screen control system makes operation easy.
3) Self-test and protecting function.
4) An electromagnetic flow meter system employed improves filling precision and truly achieves the quantitative filling.
5) Grade 304 stainless steel body and 316L stainless fluid-contact parts.
6) Employed decapping confirmation system ensures filling will not work before decapping and this guarantees the sterile room not to be polluted by the fluid.
7) Perfect-design filling system ensures reliable filling.
8) Multiple-step sterilization ensures a true aseptic filling.
9) Decapping, filling and capping parts move in an enclosed overpressure steam room which ensures the sterile conditions.
10) A pressure sensor working with a pumping system ensures the stable overpressure in the sterile filling chamber.
11) Compact construction.
12) Reliable and in a high standard. Most components are German branded.
13) Designed with CIP (Clean-in-Place) function and circuit connection.
14) New technology ensures no condensed water dripping onto bags.
Specifications:
Applicable bags: pre-cut continuous module or WEB type, 1-inch-spout prepared, 3-25 litres aseptic bags. (Spout is called Gland or Flange too.)
Filling capacity: 300-350 bags/hour for 10 litres
Power: 1.5 KW
Compressed air: 6-8 bar, 1.5 m3/h.
Food-grade steam: 5-8bar, 36kg/h
Economic Semi-automatic Single-head Bag in Box Aseptic Filling Machine and Double-head Bag in Box Aseptic Filler available.
974 Harley Davidson_Oil Pump Cap Washer_26231 78 Suppliers
Short on time? Let Harley Davidson_Oil Pump Cap Washer_26231 78 sellers contact you.