This instrument is carefully designed and developed by the relevant technical personnel of our company according to the needs of power users. The product is beautiful in appearance and easy to carry and use. It replaces the traditional bulky test instruments and test methods and is very popular among professionals.
1. Small size and light weight.
2. The measurement process is safe and fast and the measurement result is accurate.
This instrument is carefully designed and developed by the relevant technical personnel of our company according to the needs of power users. The product is beautiful in appearance and easy to carry and use. It replaces the traditional bulky test instruments and test methods and is very popular among professionals.
1. Small size and light weight.
2. The measurement process is safe and fast and the measurement result is accurate.
This instrument is carefully designed and developed by the relevant technical personnel of our company according to the needs of power users. The product is beautiful in appearance and easy to carry and use. It replaces the traditional bulky test instruments and test methods and is very popular among professionals.
1. Small size and light weight.
2. The measurement process is safe and fast and the measurement result is accurate.
Product Introduction
This instrument is used for discharge action logger inspection and verification of discharge counter in valve-type arrester including silicon carbide common valve type (FZ and FS), silicon carbide magnetic blow valve-type (FCZ and FCD) and zinc oxide arrester.
Summary
The Arrester is suitable for testing the internal defects of 10KV and below 10KV MOA (metal Oxide Arrester).Before the annual season of thunderstormsit 's necessary to test metal Oxide using 1mA DC voltage and 0.75U1mA leakage current at Power plants/substations.The equipment was developped according to the requirement of site it 's integrated with DC HV supplymeasurement and control system. it has the characters of small size and light weight.
Feature
1.Supply power: AC220V or Charging battery.
2.LCD display test datas.
3.Convenient to carry.
TKBLQ-I zinc oxide arrester tester is a special instrument used to test the electrical performance of arresters. The instrument is suitable for live or power failure detection of arresters of various voltage levels, so as to timely detect the internal insulation damp and valve aging and other dangerous defects.
TKBLQ-I zinc oxide arrester test instrument is easy to operate and easy to use. The whole measuring process is controlled by microcomputer. It can measure the total current, resistive current and its harmonics, power frequency reference voltage and its harmonics, active power and phase difference. The real waveform of voltage and current can be displayed on the large screen.
Features:
1. 5.7 "320 Ã?? 240 LCD, high-speed thermal printer; graphic display, intuitive interface, easy to operate and use.
2. It is applicable to live arrester, power failure or laboratory.
3. The current and voltage sensors are completely isolated, safe and reliable. A, B, C three-phase arrester can be stored as a group of test data.
4. The instrument can test continuously, display voltage current curve, and print data and curve quickly.
5. The internal configuration memory can store 200 groups of test data when power down.
6. With RS232 communication interface, the test data can be exported through the upper computer.
7. High speed sampling frequency, advanced digital signal processing technology, strong anti-interference performance, high accuracy of measurement results.
8. It adopts dustproof, waterproof and anticorrosive engineering plastic sealing box, which is small in volume, light in weight and easy to carry.
TKBLQ-II zinc oxide arrester tester is a special instrument used to test the electrical performance of zinc oxide arrester. The instrument is suitable for live or power failure detection of zinc oxide arrester of various voltage levels so as to timely detect the internal insulation damp and valve aging and other dangerous defects.
TKBLQ-II zinc oxide arrester tester is easy to operate and easy to use. The whole measuring process is controlled by single chip microcomputer. It can measure the total current resistive current and its harmonics power frequency reference voltage and its harmonics active power and phase difference. The instrument uses digital waveform analysis technology harmonic analysis and digital filtering software anti-interference methods to make the measurement results accurate and stable.
1. This machine adopts large screen LCD display all English menu operation easy to use.
2. High precision sampling and processing circuit and advanced Fourier harmonic analysis technology ensure more reliable data.
3. The instrument adopts high-speed magnetic isolation digital sensor to directly collect the input voltage and current signals which ensures the reliability and safety of the data.
4. Support wireless synchronous voltage sampling mode (type II).
5. The instrument can use electric field induction instead of PT secondary wiring (type I).
6. It has the functions of resistive current fundamental peak output and side phase correction.
7. The instrument is equipped with rechargeable battery calendar clock and micro printer which can store 120 sets of measurement data.
Capsicum Oleoresin is prepared by extracting the crushed capsicum (Capsicum Annum Linn) with volatile solvents by percolation method. It contains the pungent principles, capsicin not less that 8 percent. It also contains the red colouring matter called Capsanthin. This product is a powerful irritant and a carminative, which is also used as a counter irritant in lumbago and neuralgia. It can also be used to treat stomach ache that involves poorly functioning stomach muscles and as an antibacterial agents.
Extraction of oleoresin capsicum from peppers involves finely ground capsicum, from which capsaicin is extracted in an organic solvent such as ethanol. The solvent is then evaporated, and the remaining wax like resin is the oleoresin capsicum. An emulsifier such as propylene glycol is used to suspend the OC in water, and pressurized to make it aerosol in pepper spray. The high performance liquid chromatography (HPLC) method is used to measure the amount of capsaicin within pepper sprays. Scoville Heat Units (SHU) are used to measure the concentration or "heat" of pepper spray.
A synthetic analogue of capsaicin, pelargonic acid vanillylamide (desmethyldihydrocapsaicin), is used in another version of pepper spray known as PAVA spray which is used in the United Kingdom. Another synthetic counterpart of pepper spray, pelargonic acid morpholide, was developed and is widely used in Russia. Its effectiveness compared to natural pepper spray is unclear.
Pepper spray typically comes in canisters, which are often small enough to be carried or concealed in a pocket or purse. Pepper spray can also be bought concealed in items such as rings. There are also pepper spray projectiles available, which can be fired from a paintball gun. It has been used for years against demonstrators.
Derived from chilli peppers, oleoresin capsicum is the active ingredient in pepper spray and in some topical pain relievers.
Commodity:Avobenzone
CAS No. 70356-09-1
Molecular Formula C20H22O3
Molecular Weigh 310.39
EINEC No. 274-581-6
Specification Quality standard: USP36
Appearance Off-white powder
Assay 95.0-105.0%
Melting range 81.0~86.0
Impurities
Any individual impurity: 3.0%
The sum of all of the impurities: 4.5%
Loss on drying 0.5%
Packaging and storage: 1kg/aluminum foil bag. 25kg/barrel, pharmaceutical packaging barrel. Sealed, stored in dark, with a shelf life of 2 years.
Reference dosage:
The hygiene standards for cosmetics stipulate that the maximum amount added shall not exceed 5%, and the general dosage is 1-4%.
Usage:
Sunscreen agent-1789 is the most effective fat soluble UVA filter and is a safe and effective UVA sunscreen approved by the US FDA for sale on the counter. It can effectively block UVA, thereby increasing the SPF value of sunscreen products. It can improve the efficacy of sunscreen products when used in combination with UVB filters, and BL-200 has the best effect when used in combination with octyl methoxycinnamate. BL-200 can increase its stability in the product. It has an extremely effective protective and repairing effect on human skin.
Application:
This product is soluble in oil and can be formulated into a cream using the usual method. However, the product turns red when it encounters metal ions, so other components such as formula water should not introduce metal ions. The equipment should be made of pure stainless steel, and an appropriate amount of EDTA-2Na should be added to the formula water phase to chelate with metal ions.
Ansell Edge $ 15.30process (inclusive0.30 for buyer party
SOP For Ansell edge
Price $15.30 - 0.30
buyer team 70%
our team 30%
-Buyer to provide Loi, NCNDA, ICPO if intermediate company involved, POF if required
Within 1day
-Seller will provide FCO
-Buyer to give FCO Counter sign and provide ICPO
Within a day
*After signing SPA-Seller can show authorisation letter* (As requested to seller) in Zoom meeting
Spa signed by both party
Seller to provide PI
Same day of PI Shared
-*LC TRANSFERABLE, IRREVOCABLE, DIVISIBLE and REVOLVING at site*
Within 3 days
-LC needs to be open within 3 days
Within 5 to 7 working days after verification of LC
Allocation letter for complete order from manufacturer, along with required documents,
Schedule of the deliver is provided with quantity
-Material SGS to be intimated prior to buyer
-At buyer cost SGS for material done at the FOB Port Klang
-After SGS
LC cleared on the invoice value immediately
If seller or buyer FAILS to proceed the deal after signing SPA and opening of LC 2% penalty will be applied.
Ansell Edge $ 15.30process (inclusive0.30 for buyer party
SOP For Ansell edge
Price $15.30 inclusive $0.3 Commission
-Buyer to provide Loi, NCNDA, ICPO if intermediate company involved, POF if required
Within 1day
-Seller will provide FCO
-Buyer to give FCO Counter sign and provide ICPO
Within a day
*After signing SPA-Seller can show authorisation letter* (As requested to seller) in Zoom meeting
Spa signed by both party
Seller to provide PI
Same day of PI Shared
-*LC TRANSFERABLE, IRREVOCABLE, DIVISIBLE and REVOLVING at site*
Within 3 days
-LC needs to be open within 3 days
Within 5 to 7 working days after verification of LC
Allocation letter for complete order from manufacturer, along with required documents,
Schedule of the deliver is provided with quantity
-Material SGS to be intimated prior to buyer
-At buyer cost SGS for material done at the FOB Port Klang
-After SGS
LC cleared on the invoice value immediately
If seller or buyer FAILS to proceed the deal after signing SPA and opening of LC 2% penalty will be applied.
En590 10ppm Diesel
Vopak-to-vopak Procedure:
1- Buyer Sends Cis + Cp
2- Conference Call /meeting Between Buyer & Seller Where Both The Parties Exchanges
Vopak Tank Coordinates
3- Seller Release Ci, Buyer Counter Signs
4- Seller Releases Full Pop With Fresh Sgs Report
5- Buyer Makes Full Payment Via Mt 103
6- Seller Transfers Title To Buyer
7- Buyer Pays Commission To Intermediaries
8- Seller Issues Spa Contract For 12 Months
Platts {-} Minus 50 U$d Nwe And U$d 10.00 Commission Payable By The Buyer. Hence Net Cost To
The Buyer Will Be Nwe Platts {-} Minus 40 U$d
Product: En590-10ppm
Quantity: 100,000 Mt
Availability: Fob Rotterdam {vopak Tank/s}
Monthly Deliveries In Annual Contract
Conditions: Ncnda { Attached} And Intermediary Services CONTRACT {ATTACHED} will be signed
by the Buyer once their CIS + CP is accepted by the Seller.
1GB, 8GB EMMC
7 inch Capacitive Touch Screen Display
80mm built-in Thermal & Lablel Printer
Dual SIM Cards, Support Micro TF Card
Including NFC and IC card (optional)
Charging Dock Stand
Black, White and Red Colors
Can be used as Standalone Cash Register
Built-in 80mm Thermal and Label printer make it unique from others. Possess low power consumption.
