FEATURES
Electrical function is accordance with IEC 62297-1
Dual Channel function: Two TDMA receivers ar receiving datum in two independent channels at the same time, and one TDMA transmitter is transmitting in two independent channels alternately.
CSTDMA function can avoid and solve communication conflict.
Transponder has external serial data interface(RS-422, RS-232).
Transmit and reciever safety message, and equipped with "SOS" safety button.
Support three operation mode: Carrier-sense mode, assigned mode and polled mode.
Internal GPS reciever, as data source for position, COG and SOG can be connected to all devices compatible to GPS and PC, PDA, ECDIS, RADAR, etc.
Alarm and indication (via LED) for power , error, time-out, status.
Specifications
STANDARDS
IEC 62297-1
IEC 61162-1
IEC 60945-2002
VHF RECEIVER
Frequency Range
156.025MHZ ~ 162.025 MHZ
Channel Bandwidth
25 KHZ
Number of AIS Receivers
2 Receiver ( one time shared between
AIS/DSC ) / 1 Transmitter
CH-1
Default CH 87B ( 161.975 MHZ )
CH-2
Default CH 88B ( 162.025 MHZ )
Number of DSC Receiver
1 ( CH 70)
RX DSC
156.525 MHZ
Max. Usable Sensitivity
PER less 20% at -107dBm
VHF TRANSMITTER
Power Output
2 Watt ( 33 dBm ±1.5dB )
Modulation
GMSK / FM
Data Rate
9.6K dps / per channel
Modulation Spectrum
IEC 62287
DSC RECEIVER
Modulation
1300 HZ / 2100 Hz FSK
Data Rate
1200 bps ± 30 ppm
Spurious Response Rejection
Over 70dB for Signal @ -104dBm; BER less 1%
Blocking
More 84dB for Signal @ -104dBm; BER less 1%
GPS RECEIVER
Receiving Channels
12 Channels
Acquisition Sensitivity
-140dBm
Tracking Sensitivity
-150 dBm
Position Accuracy
< 2.5m CEP ( GPS ) without SA
Output Rate
1 Hz
POWER SUPPLY
Supply Voltage
12V DC ( 10V ~ 20V )
Power Consumption
Less than 10W
MAIN UNIT
4 LED Indicator Working Status
1 ON/OFF Switcher
Matsutec
HP-33A
4.3" color LCD diaply AIS transponder combo with GPS navigator
The HP-33A is a class B AIS transponder for Non-SOLAS vessels such as pleasurecraft, work-boat, fishing boat etc small boat.
Special design Watching dispaly to monitor Fishing net buoy, friendly ships etc. External Alarm for MOB and Collision-Risk management.
Feature
To AIS
1. Detail Target list and Radar overview
2. Watching disaply to monitor important subject, example: Fihsing net buoy, Friend ship etc
3. External Alarm (Buzzer)
4. Low cost, reduced size and easy installation make the HP-33A ideal to meet your budgets and demands of owners and vessel operators
To GPS
1. 4.3" Sunlight Viewvable color LCD (Brightness: 500 cd)
2. GOTO track navigation
3. Stores up to 10,000 marks/ waypoints, 100 routes and 3,000 track points
4. Delicated Man Over Board Button (MOB)
5. Support NMEA 0183 ver 2.0
6. 7 display modes available, including 2 user-customized modes
7. SBAS capable for better measurement
Equipment list ( standard):
1. Dispaly unit HP-33
2. Antenna unit HA-017 with cable 10m
3. Power canle, 2m
4. Standard spare parts and installation material
5. Operator manual
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills.
It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color.
Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating.
From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list
In particular the mill scale can be classified as follows:
Einecs (european commission no.): 266-007-8
Waste code: 10 02 10
Basel code: b 12 30
Hs code: 2619.00
Diesel En590 10-50-500-5000 And Others Ppm Ultra Low Sulphur.
D2 0,2-62 Gost 305-82 Or 0,01 Or 0,05.
D2 Automotive Fuel Oil (ago).
D6 Virgin Fuel Oil.
Hsd Diesel High Speed 500ppm En90.
Diesel En590 Euro4 Gost 52368.
Pms Premium Motor Spirit
Jp54 (ts1) Gost 10227-86.
Jet Fuel A1 Gost 10227-86.
Marine Fuel Oil Cst 180-280-380.
Espo (siberia Pacific Oil) Crude Oil Api 34,7.
Lco (light Cycle Oil).
Mazut Mt100 Gost 10585-75 And 10585-99.
Rebco Gost 51 858-2002/9965-76 Api32/crude Oil 39-1623-93.
Lpg 50/50 Propane/butane - 70/30 P/b.
Lng 5542-87 By Iso Containers Etc.
Gasoline All Types (87-89-92-95).
Bitumen/asphalt All Grades.
Fertilizers Urea, Dap, Etc
Product Description :
Petroleum products are materials derived from crude oil (petroleum) as it is processed in oil refineries. ... These fuels include or can be blended to give gasoline, jet fuel, diesel fuel, heating oil, and heavier fuel oils..
Price of product ( USD price or FOB price) :
20.000 MT monthly market price.
100.000 MT monthly market price Less 5%.
Product origin : Russia and Non Russia
Key Specifications/Special Features :
All types/grades of Fuels, Gas, Oil are available for supply.
Many commercial names for oils, fuels, gases, etc. are used in the market.
To avoid misunderstanding basic details of specifications needed by buyer are mandatory.
Specifications for types/grades of products (special grade needed by buyer) will be issued after received your credible purchase request in the form LOI/ICPO docs.
Minimum Order Size and Packgaing details :
Bulk in tanker vessels.
Tanks 20 MT.
Product Description :
Bitumen is widely used in the construction of asphalt roads and bituminous membrane products. Bitumen is commonly used to build highways, motorways and rail networks. Bitumen has excellent water-proofing properties and is widely used for making roofing products along with a range of other household and industrial applications, from emulsion paints to sound-proofing. Penetration Bitumen and Bitumen Emulsions are used for the construction of railway tracks and by using special types of bitumen such as Polymer Modified Bitumen, the vibration and noise levels are reduced due to a dampening effect. Bitumen has been proven to be effective on both high-speed railway tracks and heavy load railway tracks. Bitumen is also used for surfacing airfield runways and air strips (PMB is preffered due to its fuel resistant properties) and taxi ways. For the Marine construction industry bitumen is used for hydraulic applications such as canal lining, underwater tunnels, river bank protection, dam construction and sea defences. There are also numerous industrial applications like roofing felt material, printing inks, packaging paper, linoleum, electrical cable / Junction box insulation, mastic for roofing of terraces, and duplex paper manufacture.
Price of product ( USD price or FOB price) :
3.000 MT monthly market price.
10.000 MT monthly market price Less 5%.
Product origin : Russia and Non Russia
Key Specifications/Special Features :
Specifications for types/grades of Oil Bitumen according to buyer specifications and/or will be given upon received buyer credible purchase request in the form LOI/ICPO docs.
Minimum Order Size and Packgaing details :
MOQ 3000 MT
Bulk in tanker vessels.
Drums 150/180/200 Kg.
Jumbo bags 1000 Kg.
Poly bags 32 Kg.
Tanks 20 MT.
7485 Ha 102 Marine Ais Transponder Class B Suppliers
Short on time? Let Ha 102 Marine Ais Transponder Class B sellers contact you.
Lovage-, Levisticum officinale, is a perennial herb that looks like parsley and is in the parsley, or Apiaceae, family, like anise, dill, caraway, cumin, and fennel. Lovage is native to mountainous areas of southern Europe and Asia Minor. It is sometimes called sea parsley.
Lovage (Levisticum officinale) is a plant, the leaves and seeds or fruit of which are used to flavor food, especially in South European cuisine. It is a tall (3 to 9 ft) perennial that vaguely resembles its cousin celery in appearance and in flavor. Lovage also sometimes gets referred to as smallage, but this is more properly used for celery.
Herb (Levisticum officinale) of the parsley family, native to southern Europe. It is cultivated for its stalks and foliage, which are used for tea, as a vegetable, and to flavour foods. Its rhizomes are used as a carminative, and the seeds are used for flavouring desserts. Oil obtained from the flowers is used in perfumery.
The French call lovage céleri bâtard, "false celery," because of its strong resemblance to that plant. Lovage has been used since Greek and Roman times for everything from a seasoning, to a curative for maladies ranging from indigestion to freckles, to a love potion. It grows up to 7 feet high and has large, dark green, celerylike leaves. The flavor of the pale stalks is that of very strong celery. The leaves, seeds and stalks can be used (in small amounts because of their potent flavor) in salads, stews and other dishes such as fowl and game. The stalks can be cooked as a vegetable. Dried lovage leaves and chopped or powdered stalks can be found in natural food stores and gourmet markets. The seeds are commonly called celery seed. Lovage is also called smallage and smellage.
lovage, tall perennial herb (Levisticum officinale) of the family Umbelliferae (parsley family), native to the mountains of S Europe and cultivated elsewhere. Its aromatic fruits are used in soups and as a flavoring for confectionery and for some liqueurs. An aromatic oil extracted from the roots has been used medicinally and also for flavoring. The edible leaves are usually used like celery. Lovage is classified in the division Magnoliophyta, class Magnoliopsida, order Apiales, family Umbelliferae.
Herbal/folk tradition - Onion has an ancient reputation as a curative agent, highly extolled by the schools of Galen and Hippocrates. It is high in vitamins A, B and C and shares many of the properties of garlic, to which it is closely related. Raw onion helps keep colds and infections at bay, promotes strong bones and a good blood supply to all tissues. It acts as an effective blood cleanser that, along with the sulfur it contains, helps to keep the skin clear and in good condition. It has a sound reputation for correcting glandular imbalance and weight problems; it also improves lymphatic drainage, which is often responsible for edema and puffiness. It has long been used as a home simple for a wide range of conditions.
Aromatherapy/home use-- Non, due to its offensive smell.
Other uses -- used in some pharmaceutical preparations for colds, coughs. The oil is used extensively in most major food categories, especially meats, savories, salad dressings, as well as alcoholic and soft drinks. It is not used in perfumery work.
Distribution -- native of Western Asia and the Middle East; it has a long history of cultivation all over the world, mainly for culinary use. The essential oil is produced mainly in France, Germany and Egypt from the red onion.
Extraction -- essential oil by steam distillation from the bulb.
Characteristics -- a pale yellow or brownish-yellow mobile liquid with strong, unpleasant, sulfur odor with a tear producing effect.
Actions -- anthelmintic, anti-microbial, antirheumatic, antiseptic, antisclerotic, antispasmodic, antiviral, antibacterial, carminative, depurative, digestive, diuretic, expectorant, fungicidal, hypocholesterolemic, hypoglycemic, hypotensive, stomachic, tonic, vermifuge.
Marigolds were first discovered by the Portuguese in Central America in the 16th century.
Marigolds are hardy, annual plants and are great plants for cheering up any garden. Broadly, there are two genuses which are referred to by the common name, Marigolds viz., Tagetes and Celandula. Tagetes includes African Marigolds and French Marigolds. Celandula includes Pot Marigolds.
Kingdom : Plantae
Division : Magnoliophyta
Class : Magnoliopsida
Order : Asterales
Family : Asteraceae
Genus : Tagetes, Calendula
Marigolds come in different colors, yellow and orange being the most common. Most of the marigolds have strong, pungent odor and have has great value in cosmetic treatment. There are many varieties of Marigolds available today. Some of the major Marigold varieties are listed below:
African or American Marigolds (Tagetes erecta): These marigolds are tall, erect-growing plants up to three feet in height. The flowers are globe-shaped and large. Flowers may measure up to 5 inches across. African Marigolds are very good bedding plants. These flowers are yellow to orange and do not include red colored Marigolds. The Africans take longer to reach flowering stage than the French type.
French Marigolds (Tagetes patula): Marigold cultivars in this group grow 5 inches to 18 inches high. Flower colors are red, orange and yellow. Red and orange bicolor patterns are also found. Flowers are smaller, (2 inches across). French Marigolds are ideal for edging flowerbeds and in mass plantings. They also do well in containers and window boxes.
Signet Marigolds (T. signata 'pumila'): The signet Marigolds produce compact plants with finely divided, lacy foliage and clusters of small, single flowers. They have yellow to orange colored, edible flowers.The flowers of signet marigolds have a spicy tarragon flavor. The foliage has a pleasant lemon fragrance. Signet Marigolds are excellent plants for edging beds and in window boxes.
Mule Marigolds: These marigolds are the sterile hybrids of tall African and dwarf French marigolds, hence known as mule Marigolds. Most triploid cultivars grow from 12 to 18 inches high. Though they have the combined qualities of their parents, their rate of germination is low.
Marigold (Calendula) is an extremely effective herb for the treatment of skin problems and can be used wherever there is inflammation of the skin, whether due to infection or physical damage; for example, crural ulceration, varicose veins, haemorrhoids, anal fissures, mastitis, sebaceous cysts, impetigo or other inflamed cutaneous lesions.
As an ointment, Marigold (Calendula) is an excellent cosmetic remedy for repairing minor damage to the skin such as subdermal broken capillaries or sunburn. The sap from the stem is reputed to remove warts, corns and calluses.
Commodity: Ammonium nitrate porous prills
1.Production of granular porous ammonium nitrate for industrial use and agricultural granular ammonium nitrate. Products with low moisture content, not easy to cake; high compressive strength, not easy to break; high oil absorption rate. Ammonium nitrate content is more than 99%, the appearance is white granular crystals, no impurities visible to the naked eye.
2. Purpose:
Explosive material: granular ammonium oil explosive is made by mixing porous ammonium nitrate with raw oil. Its speed can reach more than 3 200 m/s. This explosive has strong explosive power, safe and reliable use, low price, cost saving, and can usually reduce the cost by 20%-40%. At present, this kind of explosive has been widely used in mining, construction, railway and highway construction, agricultural and water conservancy construction and national defense and other fields.
Commodity:Sodium persulfate
Molecular Formula : Na2S2O8
Molecular weight : 238.13
Description
Sodium persulfate is a white,crystalline,odourless salt.It is used as initiator for the Polymerization of monomers and as a strong oxidizing agent in many applications.It has the particular advantage of being almost non - hygroscopic,of having a particularly good storage stability as a result of its extremely high purity and of being easy and safe to handle.
Transportation
Road/Rail transport : GGVS,GGVE,ADR,RID/CLASS 5.1 Sea transport : GGV Sea/IMDG code : CLASS 5.1 Page 5185,UN no.1505
Water hazards class 1(slight water hazard)
All information is given in good faith,but without warranty,since the conditions of use are outside our control. Verification by the user is recommended.Freedom from patent restriction cannot be assumed.
Package
(1) In 25kgs net multiple paper bags with one PE bag inner
(2) In 25kgs net PE bags
(3) In 25kgs net woven bags with two PE bags inner
(4) In 1000kgs net big woven bags with one PE bag inner
The above package is also with a pallet 1000kgs each.
Storage
NPS(SPS) is not combustible but assists combustion materials due to release of oxygen.Provided it is stored under appropriate condition.It must be stored dry in closed containers and protected from direct sunlight,heat and humidity.Impurities such as dirt,rust or traces of metal and reductants may cause catalytic decomposition.The product as supplied or in solution needs to be handled with appropriate care.The eye,skin and clothes must be protected when working with NPS(SPS) as damp powder or aqueous solution has a bleaching and slightly corroding effect.
Application
Polymerization : Initiator for the emulsion or solution Polymerization of acrylic monomers,vinyl acetate,vinyl chloride etc.and for the emulsion co-polymerization of styrene,acrylonitrile,butadiene etc.
Metal treatment : Treatment of metal surfaces(e.g. in the manufacture of semiconductors;
cleaning and etching of printed circuits),activation of copper and aluminium surfaces.
Cosmetics : Essential component of bleaching formulations.
Paper : modification of starch,repulping of wet - strength paper.
Textile : Desizing agent and bleach activator - particularly for cold bleaching.(i.e.bleaching of Jeans).
Others :
- Chemical synthesis
- Water treatment(decontamination)
- Waste gas treatment,oxidative degradation of harmful substances(e.g.Hg)
- Disinfectant
ITEMS SPECIFICATIONS
Appearance white crystalline salt
Assay 99.0% w/w min
Active oxygen 6.65% w/w min
Chloride and chlorate(as CL) 0.005% w/w max
Ammonia (NH4) 0.05% w/w max
Manganese(Mn) 0.0001% w/w max
Iron(Fe) 0.001% w/w max
Heavy metals(as Pb) 0.001% w/w max
Moisture 0.05% w/w max
Decomposition of the product as supplied at above 65C
Recommended storage temperature Normal Temperature
Storage stability as from date of delivery 12 months
Fly Ash is by product generated during combustion of coal, and comprises the fine particles that rise with the flue gases. Ash which is collected from the bottom is termed bottom ash. Fly ash is collected by electrostatic precipitators or other particle filtration equipment before the flue gases reach the chimneys of coal-fired power plants and together with bottom ash removed from the bottom of the furnace is in this case jointly known as coal ash. Depending upon the type of coal being used, the specification of Fly Ash varies considerably, but Fly Ash contains substantial amounts of silicon dioxide and calcium oxide (CaO), both being endemic ingredients in many coal-bearing rock strata. We are a reputed Fly Ash Exporter based in India and are supplying Fly Ash different cement, ready mix concrete, steel, refractories and construction industries.
The Major Utilization Areas Of Fly Ash :
- Manufacture of Portland Pozzolanic Cement & Performance improver in Ordinary Portland cement (OPC).
- Part replacement of OPC in cement concrete.
- High volume Fly Ash concrete.
- Roller Compacted Concrete used for dam & pavement construction.
- Manufacture of ash bricks and other building products.
- Construction of road embankments, structural fills, low lying area development.
- As a soil amender in agriculture and wasteland development.
Types of Fly Ash:
- According to the type of coal used fly is classified into two types. Anthracite and bituminous coal produces Fly Ash classified as class F. Class C Fly Ash is produced by burning lignite or sub-bituminous coal. Class C Fly Ash has self-cementing properties.
- Class F and Class C Fly Ash are products of the combustion of coal in large power plants. Fly Ash is collected in electrostatic precipitators or baghouses, and then transferred to large silos for shipment. When needed, Fly Ash is classified by precise particle size requirements, thus assuring a uniform, quality product.
- Class F Fly Ash is available in the largest quantities. Class F is generally low in lime, usually under 15 percent, and contains a greater combination of silica, alumina and iron (greater than 70 percent) than Class C Fly Ash.
- Class C Fly Ash normally comes from coals which may produce an ash with higher lime content generally more than 15 percent often as high as 30 percent. Elevated CaO may give Class C unique self-hardening characteristics.
Ethyl Acetate is an ester of Ethanol and Acetic Acid, (systematically Ethyl Ethanoate, commonly abbreviated EtoAc or EA) an organic compound having formula CH3COOCH2CH3. Liquid Ethyl Acetate is a colorless solvent has a characteristic sweet / fruity smell. We are a distinguished Liquid Ethyl Acetate Exporter based in India. Liquid Ethyl Acetate, offered by us, is perfect in formulation is well-tested. Further, we welcome bulk orders for Liquid Ethyl Acetate with complete sense of responsibility.
Applications:
- Ethyl Acetate is used in a variety of coating formulations such as epoxies, urethanes, cellulosic, acrylics and vinyl’s.
- Applications for these coatings are numerous wood furniture and fixtures, agricultural, construction and mining equipment, auto refinishing, and maintenance and marine uses.
- Ethyl Acetate has applications as a solvent in inks for flexographic and rotogravure printing.
- It is used as an extraction solvent in the production of pharmaceuticals and food, and as a carrier solvent for herbicides.
- High purity product can be used as a viscosity reducer for resins used in photoresist formulations in the electronics industry.
Natural Red Iron Oxide is the most widely occurring Minerals in Earth. It is widely used in many applications due as it is economical as compared to Synthetic Oxides.
Applications :
Red Oxide is anti-corrosive and has inertness to alkali and chemicals which makes its very viable for making of paint, protective coating for steels, cement coloring, NPK Fertilizers, paving tiles.
Calcined Bauxite is obtained by calcining (heating) superior grade Bauxite at high temperature (from 850 oC to 1600 oC). This removes moisture thereby increasing the alumina content. Compared to an alumina content of about 57 % to 58 % in raw Bauxite, Calcined Bauxite has an alumina content of 82 % to 86 %. The heating is carried out in rotary kilns. Calcination is done at different temperatures ranging from 850 oC to 1600 oC depending upon the customer’s application.
We export Calcined Bauxite for various applications such as refractory bricks, abrasives, steel polishing, etc. We provide consistency in quality and availability of Calcined Bauxite at extremely competitive prices.
Applications of Calcined Bauxite:
Refractory Grade Calcined Bauxite (CB - I and CB - II Grade) : To make refractory grade, Bauxite is thermally treated at 1600 oC to produce Calcined Bauxite where the Alumina content is mostly above 82%.
Brown Fused Alumina, Proppants and Road Surfacing : To make the above grades, Bauxite is thermally treated at 1000 oC - 1200 oC to produce Calcined Bauxite where the Alumina content is anywhere between 80-88% depending on the requirement.
We are a reliable industrial source for availing Bleaching Earth . Bleaching Earths have been used in the refinement of edible oils and fats since the end of the 19th century. Naturally-active Bleaching Earth has been used under the name of Fuller’s Earth since about 1880. Bentonite can be transformed into highly active Bleaching Earths by treatment with acid. We source Bleaching Earth from one of the leading producers, with manufacturing capacities in India, Malaysia, and Belgium. They use the unique filter less technology to produce superior and efficient Bleaching Earth for the Edible Oil Industry.
Bauxite is a soft, whitish to reddish-brown rock consisting mainly of alumina-bearing hydroxides, oxides of iron, silicon and titanium with impurities of Ca, Mg, Cr, V, P, Ga and other elements. Raw Bauxite is a major source of aluminium. Basic alumina containing minerals of Bauxites are gibbsite Al(OH)3, Boehmite g-AlO(OH) and Diaspore a-AlO(OH). We are a major Raw Bauxite Exporter based in Maharashtra (India) and catering to the diverse demands of several middle and eastern Asian countries.
About Raw Bauxite:
The processing of Raw Bauxite is done at a number of alumina refineries in the world. Bauxite can be processed at a low-temperature autoclave digestion (145 oC to 155 oC). Raw Bauxite can be used also for sweetening stage and for non-autoclave digestion in agitators (105 oC).
About 85% of bauxite mined worldwide is used to produce alumina for refining into Aluminium metal and the balance 15% is processed and value added to make its way to other uses like refractory, chemical, cement, abrasives, etc. Aluminium is possibly the most versatile product with applications in almost every industry. Since Bauxite is the primary source for Aluminium there will always be an ongoing promising demand for the same.
Application & Uses of Bauxite:
Raw Bauxite is successfully used for metallurgical grade alumina production besides applications in the cement industry, alumina chemical, steel, alum, energy industries, flame-retardants, etc. Bauxite is used in :
- Aluminium
- Cement
- Chemical
- Blast Furnaces
- Iron/Steel Ladles, etc.
Advantages of Artha Bauxite:
Artha Mineral Resources has good sources for Gibbsitic Bauxite which requires low digestion temperature (145 oC -155 oC) making it more economical to process. Mines are also in close proximity to all-weather ports which makes it very convenient and cost effective to ship this material.
Gypsum (CaSO4.2H2O) is a naturally occurring mineral mined from deposits formed by ancient sea beds as a raw material, white when pure, but commonly grey, yellow, red or brown, owing to impurities. The anhydrous form (CaSO4), anhydrite, is common. We are enlisted amongst the topmost INatural Gypsum Importers and Exporters from India.
Applications:
Gypsum has many industrial applications in its raw or Calcined forms, especially in the building and construction industries. Uses of Raw Gypsum are principally as:
- a retarder for Portland cement
- a fertilizer or soil conditioner
- mineral filler
- oxidizing agent in glass manufacture or other industrial applications.
Most gypsum is calcined and used in the manufacturing of plaster products. Wallboard and plaster requires gypsum contents greater than 85%, although producers prefer a minimum of 94–95% along with whiteness in color. The major consumers of the Gypsum at present are Cement Industry. By weight about 4% to 6% Gypsum in crushed condition is utilized in Portland Cement Manufacture after mixing with cement/clinker. Gypsum acts as a retarder and controls the setting time of cement.
Imported Gypsum from Iran:
Natural Gypsum is one of the most superior qualities and consistent material available for Import and Export. Natural Gypsum has adequate whiteness, high purity as well as it is low in cost which makes it absolutely feasible for white cements as well as Plaster Of Paris manufacturing and for the Cement Industry all together. One more important quality that distinguishes Natural Gypsum from others is its hardness which is less as compared to other sources and allows different industries to easily grind the same for processing into final product which in turn results in to reduced power consumption for manufacturing industries.
Brazilian origin Icumsa 45 white refined sugar available for CIF term. Procedure as follows:
1. Buyer issues a Letter of Intent (LOI) that includes the terms and other conditions listed here
with their requested product, quantity and requested price.
Once the LOI is received from the Buyer, the seller will issue the COMPLETE
CORPORATE OFFER (FCO) within 48 hours confirming the product, quantity and selling
price.
2. Buyer confirms and approves the FCO within five (5) days; signed and stamped, and
attaches their ICPO + CIS to the seller. In countries where government clearance and/or quota is
required, proof of such customs clearance and/or quota will be required at time of ICPO.
3. At the Buyerâ??s request and sellerâ??s discretion, a meeting with the buyer and buyer's legal
representative and seller may take place via zoom, google meet or similar. ( Optional )
4. After the signed FCO + ICPO + CIS has been received, verified and approved (and any necessary
meetings taken place), the seller will issue the contract (SPA) to the buyer on the agreed
terms.
5. Once the contract is drawn up and accepted by the buyer, the buyer must return the
contract within a maximum of two (3) days.
6. After receiving the contract accepted by the buyer, the seller will send a signed, sealed
copy to the buyer together with the Proforma Invoice (PI)
7. Buyer will have 48 hours to signs and return the Invoice.
8. Once the Invoice is accepted in-full, the Buyer and Seller will deposit a copy of the fully
executed contract (SPA) with the respective banks.
9. Within seven (7) days from the deposit of the contract (SPA), the buyerâ??s bank will issue the
financial instrument ( MT 760 SBLC / MT 700 DLC ), 100% open, confirmed,
irrevocable, non transferable, divisible, and negotiable for the total amount of one month,
renewable during the duration of the contract plus one day. Buyer's issuing bank must be
a first-class, global bank accepted by the sell
Sesame oil is derived from the seeds of the flowering sesame plant, also known as Sesamum indicum. These plants are native to East Africa and India.Due to its hearty, nutty flavor and its high levels of mono- and polyunsaturated fats, sesame oil has become one of the most popular oils for cooking.
Sesame oil is extremely stable and a rich source of Vitamin A, B, and E. Also, it contains beneficial anti-oxidants. Our Sesame Oil easily subsides into the skin and improves blood circulation and immunity.
Calcined alumina can be used in the polishing of different alumina products(mainly used in middle, fine polishing).It is also widely used in high-class aluminium refractory material, unshaped refractory materials, high aluminium ceramic product and advanced coating, etc, . Item Al2o3 % Na2o % Sio2 % Fe2o3 % D50 A4m 99.8 0.1 0.05 0.02 3.1
Alumina (Al2O3), the industrial Al2O3 is prepared from alumina (Al2O3, 3H2O) and hard alumina, and the Al2O3, which is high in purity, is usually prepared by chemical methods. Al2O3 has many isomorphic crystals, and there are currently more than 10 known types, mainly three types of crystal, namely gamma-al2o3, beta-al2o3, alpha-al2o3.Which structure is different, with different properties in high temperature above 1300 s almost entirely into alpha Al2O3.
7485 Ha 102 Marine Ais Transponder Class B Suppliers
Short on time? Let Ha 102 Marine Ais Transponder Class B sellers contact you.
