Our gypsum board plant applies international up-to-date equipments, such as full automatic batching system, plate type forming system, auto edge-adjusting, fixed length cutting, turnover transverse conveyor, transverse dryer, prevent folding device, automatic tracking mechanism, humidity and temperature auto-control device, fully automatic wrapping and booking device, auto packing system and so on. The batching system achieved fool-operation of 20 kinds of powder and slurry, and our production line can adjust metering and adding of each main and auxiliary material automatically according to the forming speed.
Dosing section¡ªforming section¡ªcutting and drying section¡ªedge trimming and stacking section
4. Final product variety:
Common gypsum board
Fire proof gypsum board
Water resistance gypsum board
5. Fuel variety:
Coal, natural gas, diesel oil, heavy oil, ect.
6. Advantages:
1) product quality: product quality is priority to the international standard gb/t9775-1999 (equal to european standard).
2) the gypsum board which produced by the gypsum board production line is heat-resistant, fire-resistant, insulated, light, nonpoisonous, little pollution, adjusting the humidity of the room.
3) we can offer a basket of services of design, producing, installation, commissioning and training, as well as turnkey project for customers.
This is rubin industry and hope we can work together for better future!
Any questions about gypsum board plant, pls contact us.
Contact person-myra
Mob no------8613832120199
Skype-------myra.Qin
Will shipment by sea, and the packing will suitable for seaworthy packing.
b) Fireproof paper surface gypsum board (H)
c) Waterproof paper surface gypsum board (S)
Advantages of Gypsum Board:
1. Product quality: product quality is priority to the international standard GB/T9775-1999 (equal to European Standard).
2. The gypsum board which produced by the gypsum board production line is heat-resistant, fire-resistant, insulated, light, nonpoisonous, little pollution, adjusting the humidity of the room.
gypsum board plant
Gypsum Board Production Line
1.gypsum board plant
2.we are the member of the chinese assoication of gypsum
3.capacity:2million sqm ---30 million sqm
4.exported to more than 15 countries such as: Iran, Uzbekistan, Pakistan, Saudi Arabia, Egypt, Ethiopian, Tanzania etc.
Thickness: 7mm-15mm
Width: 1200mm or 1220mm
Length: 1800mm~3600mm
Types of Gypsum Board of gypsum board plant
a) Common paper surface gypsum board
b) Fireproof paper surface gypsum board (H)
c) Waterproof paper surface gypsum board (S)
Gypsum Board Manufacturing Plant
Wuxing Providing turnkey gypsum board solutions from plant design to completion. With talented engineers and state-of-the-art equipment, we can help you build your Annual Output 20million (12.5mm) Square Meters gypsum board manufacturing plant.
As a professional building materials equipment manufacturer, Wuxing is committed to providing customers with high-quality, economical, energy-saving and environmentally friendly equipment systems and plant construction solutions. At present, we have successfully helped customers in many countries to build several gypsum board production lines, and our products and services have been widely praised by customers.
Translated with DeepL.com (free version)
Main technical indicators:( based on the board of thickness 12.5mm)
4. Power requirement:
Three phrase AC420V, 50Hz
One phrase AC220V,50Hz
This production line is a fully mechanized production line with a total installed capacity of about 1500 KW.
5. Fuel requirement: natural gas, diesel, coal
6. Workshop requirements: 340M length * 50M,had better more than that.
7. Automation degree: operation system adopts PLC program control,fully automated production process, forming - sealing head and stack.
Paper faced gypsum board production plant
Paper faced gypsum board machine
Company detail
Hebei xiangyi mechanical co., ltd., founded in 2002, is engaged in all kinds of mechanical design and manufacture of professional manufacturers, the existing staff of more than 100 people, processing equipment more than 50 taiwan.Is a collection development guidance and a comprehensive technology companies.
The company's philosophy is innovation changes in the technological era quality cast brand management dream in the future. The company from market research, business analysis to design and development, after-sales tracking, to provide you with full service.In recent years, our company successfully developed automatic gypsum board production line, gypsum powder production line, such as a batch of another batch of production equipment.
178808 Gypsum Board Plant Suppliers
Short on time? Let Gypsum Board Plant sellers contact you.
Our gypsum board manufacturing machine applies international up-to-date equipments, such as full automatic batching system, plate type forming system, auto edge-adjusting, fixed length cutting, turnover transverse conveyor, transverse dryer, prevent folding device, automatic tracking mechanism, humidity and temperature auto-control device, fully automatic wrapping and booking device, auto packing system and so on. The batching system achieved fool-operation of 20 kinds of powder and slurry, and our production line can adjust metering and adding of each main and auxiliary material automatically according to the forming speed.
5. Product quality and specification:
1) The product is in compliance with National Standard GB/T9775-2008
2) Product specification:
Length: 2400mm~3600mm
Width: 1200mm or 1220mm
Thickness: 8mm-20mm
6. Main process:
1)Raw material blending;
2)Shaping;
3)Wet board/panel conveying;
4)Drying;
5)Dry board/panel conveying;
6)Finished product stacking and storage.
7. Main technology:
The production line adopts special designed hot air stove heating system
8.Raw material consumption list:
(Based on 9.5 mm gypsum board for reference)
The paper faced gypsum board production line is the professional equipment for producing the new decorated material. The principal working process are as follows: first, we take certain amount of hemihydrate gypsum powder, water and other additives, through the automatic measurement device and automatic conveying system, they will be conveyed into the mixer and changed into the gypsum slurry which will be scattered on continuous moving faced paper evenly. Second, at the same time, with the continuous moving and vibrating, the slurry will gradually diffuse and even scattered. Then the slurry will go into the forming machine and compound with the top and bottom faced paper. By the process of extruding and forming, the slurry will be encased by the faced paper and the continuous pulpous gypsum boards are formed. Third, In the forming line, the wet solid paper faced gypsum board will be gradually formed after the process of recondition, natural coagulating, automatic cutting, etc. The wet board will be arranged according to the programmed control system. With the help of rollers, belt conveyer and overturner, they will quickly enter into the dryer. Fourth, the board will be strictly controlled in the separate temperature zone of the dryer. After blowing into different thermal hot air, the moisture of the wet board will be evaporated. Because of the reaction of the starch, the board will be attached to the faced paper, and then the dry gypsum board will form and exit from the dryer. Moreover, after passing though overtuner and the folding device (the front side is inside) for the second time, the board will be cut into certain specification by saw. Finally, the finished gypsum board will be conveyed to the automatic sealing device and the stacker. After the stacking, the board will be transported to the finished products warehouse by the forklift.
Our compnay mainly manufacture gypsum board and powder production line.We can supply all capacity what do you need.And supply top quality machine.Give you special price.We are the reality manufactuer and the biggest manufacture in china.
The board line capacity:from 1 million sq.M to 30 million sq.M per year
The powder line capacity from 10000 tons per year to 1000000 tons per year.
ishes from others by the following aspects:
1) mixing technology for better raw material measuring and preparation
2)more efficient drying technology for kiln to use different sources of fuels and save consumption 3) automatic control system to enable real time control of line
4) high production speed and a wide range of production capacities to meet specific needs
5) industry deep experience to guarantee success
Our complete turnkey solutions could help you achieve success from raw material to high quality finished wallboard products, ensuring a continuous success step by step. Our strong supply range could customize a plant to suit your specification and budget either from a small production capacity of 2 million m2/year to large capacity of 60 million m2/year.
Gypsum cove cornice offers architects and home builders creative idea and fashion for home and buildings. An attractive gypsum cove cornice could outstand the taste of a building.
Gyplast technology¡¡¥s new gypsum cove cornice production line could automatically produce gypsum cornice at a high speed. By change of mould, a wide range of gypsum cornice products could be efficiently produced automatically.
Technical characteristics of SkyLite polycarbonate awning:
* Using materials are SkyLite polycarbonate panels with UV resistance, high light transmission, sound insulation, good heat insulation.
* Negative link between the frame and the plate, minimizing the screw holes on the surface, avoiding the leak through the screw hole and high aesthetics.
Simple to transport and install, save time in construction and installation.
* Environmentally friendly, safe for users.
Size of 9 square wave polycarbonate roofing sheets
Width: 1070mm
Thickness: 0.65mm - 1.5mm
Common length: 6m
Especially, providing the length according to the individual requirements of each customer
The cellular polycarbonate skylight for metal roofs is a natural lighting system based on lines shaped in half barrel cellular polycarbonate.
All it's elements are designed under the norms of the SSR type roof systems.
DESIGN
All the elements that made up our system are attached to the base moldings and do not penetrate nor damage the SSR deck system at the end design to derail the water and ensure a smooth transition to the cover.
They can be placed in di�erent widths from 0.45 meters to 1.37 meters and 6mm or 8mm of cellular polycarbonate.
Our Roof Curbs are manufactured to meet equipment manufacturer'size requirements or the pipe penetration system.
Made with 14 or less gauge galvanized steel, with a minimal curb height of 8â?? and all welded ends for better herm. It can be install at any convenient location and as soon as the roof support members are in place. As a general rule, the curb should be placed directly on the roof support members.
DESIGN
The interior curb is designed according to the weight of the equipment, its dimensions and the propose of the equipment. The curb can also need additional nailing plates which can be provide and locate directly below the �anges of the curb to give further support and to minimize vibration.
The reinforcements in place are to consider as well the return and the supply of air. The exterior design allows the metal roof deck to expand or contract without folding or breaking, each and every roof curb is manufactured according to the roof system in place and the corresponding heating, ventilation and air conditioning system.
ADVANTAGES
Design according to equipment.
Welded joints.
Metal caps.
Custom Made.
Cost efficiency.
Certified quality assurance.
Easy on-site Installation.
Construction quality control at factory.
Perfect Hermeticity.
APPLICATIONS
AC units,
Chillers.
Cooling towers,
Large extractor.
178808 Gypsum Board Plant Suppliers
Short on time? Let Gypsum Board Plant sellers contact you.
