GW5250GJB Cement Mixer Truck (Hino Power III)
Model GW5250GJB
Driveline 6í-4
wheelbase mm 3600+1400
Overall dimension Length mm 8890
Width mm 2490
Height mm 3875
Track FR/RR mm 2006/1864
Overhang FR/RR mm 1525/2415
Kerb weight kg 14300
GVW kg 25000
FR/RR axle loading ability FR/RR kg 7000/18000 double axle in parallel
Max speed Km/h 86
Min turing diameter m 18.7
Engine
Model P11C-UL
Type in-line,6 cylinders, turbo-cooling
Displacement L 10.52
Emission Euro ó=
Max output kw/rpm 259/2100
Max torque N.m/rpm 1460/1100
Chassis
Clutch SACHS MFZ430
Transmission FST 9JS150T-B(1500Nm)
Front axle Front axle (7.5t)
Middle axle Tandem drive axle(13t)
Rear axle Tandem drive axle(13t)
Front suspension Multi-leaf spring
Rear suspension Multi-leaf spring
Steering system ZF8098
Braking system rear drum brake with ABS, double circuit pneumatic pressure, with shoe-wearing sensor, KNORR,WABCO brake valve
Oil tank 400L aluminum alloy
Tire 12.00-20
Mixing drum
Length mm 4605
Diameter mm 2305
Gradient íp 13.5
Geometric volume M3 15.18
Working volume M3 9
Working rotated speed R/min 0~18
Feeding speed M3/min í¦3
Discharging speed M3/min í¦1
Remained rate % <0.1
Driving system
Hydraulic pump DV23
Motor MK23
Gear case TMG61.2,P4300
Water supply system
Volume(L) 300
Means of water pneumatic pressure
VULCAN blacksmith by mixing technology, Tanks imported high-quality materials, Unique three-dimensional mixing technology, the residual material from virtually zero rate, it is the true sense of professional engineering mixers, and the most appropriate to meet long-range, long time, as well as the requirements of high-strength concrete transport needs.
The words and diagram is not binding each other. We keep the right of changing the interior
program along with the approved technology.
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
Applications:
Steel manufacturing
Cement manufacturing
Glass manufacturing
As road ballast
As agricultural lime
In road and traditional building constructions
In paints manufacturing
In power plant smokestacks
Stock No - 2411211006SRV
Reg Year/Month - 0000
Mileage -
Engine Size -
Transmission - MT
Drive Type -
Steering - Right Hand
Engine Model -
Model Code - FD151A
Chassis No - 762***
Fuel - Diesel
Color - White
Seats - 1
Maximum Carry -
Status -
Gypsum (CaSO4.2H2O) is a naturally occurring mineral mined from deposits formed by ancient sea beds as a raw material, white when pure, but commonly grey, yellow, red or brown, owing to impurities. The anhydrous form (CaSO4), anhydrite, is common. We are enlisted amongst the topmost INatural Gypsum Importers and Exporters from India.
Applications:
Gypsum has many industrial applications in its raw or Calcined forms, especially in the building and construction industries. Uses of Raw Gypsum are principally as:
- a retarder for Portland cement
- a fertilizer or soil conditioner
- mineral filler
- oxidizing agent in glass manufacture or other industrial applications.
Most gypsum is calcined and used in the manufacturing of plaster products. Wallboard and plaster requires gypsum contents greater than 85%, although producers prefer a minimum of 94–95% along with whiteness in color. The major consumers of the Gypsum at present are Cement Industry. By weight about 4% to 6% Gypsum in crushed condition is utilized in Portland Cement Manufacture after mixing with cement/clinker. Gypsum acts as a retarder and controls the setting time of cement.
Imported Gypsum from Iran:
Natural Gypsum is one of the most superior qualities and consistent material available for Import and Export. Natural Gypsum has adequate whiteness, high purity as well as it is low in cost which makes it absolutely feasible for white cements as well as Plaster Of Paris manufacturing and for the Cement Industry all together. One more important quality that distinguishes Natural Gypsum from others is its hardness which is less as compared to other sources and allows different industries to easily grind the same for processing into final product which in turn results in to reduced power consumption for manufacturing industries.
Fly Ash is by product generated during combustion of coal, and comprises the fine particles that rise with the flue gases. Ash which is collected from the bottom is termed bottom ash. Fly ash is collected by electrostatic precipitators or other particle filtration equipment before the flue gases reach the chimneys of coal-fired power plants and together with bottom ash removed from the bottom of the furnace is in this case jointly known as coal ash. Depending upon the type of coal being used, the specification of Fly Ash varies considerably, but Fly Ash contains substantial amounts of silicon dioxide and calcium oxide (CaO), both being endemic ingredients in many coal-bearing rock strata. We are a reputed Fly Ash Exporter based in India and are supplying Fly Ash different cement, ready mix concrete, steel, refractories and construction industries.
The Major Utilization Areas Of Fly Ash :
- Manufacture of Portland Pozzolanic Cement & Performance improver in Ordinary Portland cement (OPC).
- Part replacement of OPC in cement concrete.
- High volume Fly Ash concrete.
- Roller Compacted Concrete used for dam & pavement construction.
- Manufacture of ash bricks and other building products.
- Construction of road embankments, structural fills, low lying area development.
- As a soil amender in agriculture and wasteland development.
Types of Fly Ash:
- According to the type of coal used fly is classified into two types. Anthracite and bituminous coal produces Fly Ash classified as class F. Class C Fly Ash is produced by burning lignite or sub-bituminous coal. Class C Fly Ash has self-cementing properties.
- Class F and Class C Fly Ash are products of the combustion of coal in large power plants. Fly Ash is collected in electrostatic precipitators or baghouses, and then transferred to large silos for shipment. When needed, Fly Ash is classified by precise particle size requirements, thus assuring a uniform, quality product.
- Class F Fly Ash is available in the largest quantities. Class F is generally low in lime, usually under 15 percent, and contains a greater combination of silica, alumina and iron (greater than 70 percent) than Class C Fly Ash.
- Class C Fly Ash normally comes from coals which may produce an ash with higher lime content generally more than 15 percent often as high as 30 percent. Elevated CaO may give Class C unique self-hardening characteristics.
Construction equipment (home improvement, electrical supply, pipes and fitting etc..), heavy machinery: mining equipment, excavator, drilling, and so on
paper and packaging, production line: kraft paper, plastic and paper box, aluminum foil, plastic wrap, boxes, paper cups, take a way box and so on..
renewable energy: solar panels, inverter, photovoltaic chemical and raw material: soda ash, titanium, pe, ppe.Our company hangzhou xing ying technology co., ltd.(astrioglobal) also provides exporting, quality control, international logistics and consulting/negotiation.
According to different cement production lines with transmission power up to 8400kW and ratio from 35:1 to 80:1,we can match JS JST,JD(X)and MDH series central driving mil reducers to meet needs for various cement lines of daily output 2500-10,000 tons.
1.Polyethylene glycol series products can be used in pharmaceuticals. Polyethylene glycol with low relative molecular weight can be used as solvent, co-solvent, O/W emulsifier and stabilizer, used to make cement suspensions, emulsions, injections, etc., and also used as water-soluble ointment matrix and suppository matrix, solid waxy polyethylene glycol with high relative molecular weight is often used to increase the viscosity and solidification of low molecular weight liquid PEG, as well as compensate other drugs; For drugs that are not easily soluble in water, this product can be used as a carrier of solid dispersant to achieve the purpose of solid dispersion, PEG4000, PEG6000 is a good coating material, hydrophilic polishing materials, film and capsule materials, plasticizers, lubricants and drop pill matrix, for the preparation of tablets, pills, capsules, microencapsulations, etc.
2.PEG4000 and PEG6000 are used as excipients in the pharmaceutical industry for the preparation of suppositories and ointments; It is used as a finishing agent in the paper industry to increase the gloss and smoothness of paper; In the rubber industry, as an additive, it increases the lubricity and plasticity of rubber products, reduces power consumption during processing, and prolongs the service life of rubber products.
3.Polyethylene glycol series products can be used as raw materials for ester surfactants.
4.PEG-200 can be used as a medium for organic synthesis and a heat carrier with high requirements, and is used as a moisturizer, inorganic salt solubilizer, and viscosity adjuster in the daily chemical industry; Used as softener and antistatic agent in the textile industry; It is used as a wetting agent in the paper and pesticide industry.
5.PEG-400, PEG-600, PEG-800 are used as substrates for medicine and cosmetics, lubricants and wetting agents for rubber industry and textile industry. PEG-600 is added to the electrolyte in the metal industry to enhance the grinding effect and enhance the luster of the metal surface.
6.PEG-1000, PEG-1500 is used as a matrix or lubricant and softener in the pharmaceutical, textile and cosmetic industries; Used as a dispersant in the coating industry; Improve the water dispersibility and flexibility of the resin, the dosage is 20~30%; The ink can improve the solubility of the dye and reduce its volatility, which is especially suitable in wax paper and ink pad ink, and can also be used in ballpoint pen ink to adjust ink viscosity; In the rubber industry as a dispersant, promote vulcanization, used as a dispersant for carbon black filler.
7.PEG-2000, PEG-3000 are used as metal processing casting agents, metal wire drawing, stamping or forming lubricants and cutting fluids, grinding cooling lubricants and polishes, welding agents, etc.; It is used as a lubricant in the paper industry, etc., and is also used as a hot melt adhesive to increase rapid rewetting capacity.
GAIPL is modern enterprise which produces and sells complete sets of power equipment and accessories ,1T/h-660T/h boiler parts and accessories.With the advantages of scientific research,mass production,professional technical consultation,timely delivery and installation maintenance,our products are sold all over the world.We have provided quality and affordable products for thousands of power plants,thermal power stations and heating companies, such as Chemical plant,Textile plant,Food & Beverage,Garment manufacturing,Paper Plant,Printing and dyeing mill,Cement Plant,Fertilizer plant,Feed mills,Rubber factory.Schools,Hotel,Bath Center,Swimming Pool,Hospital,Hotel,etc.In INDIA & Also EXPORTS to many countries ,we enjoy a high reputation.We provide various kinds of boiler fittings,such as economizer,membrane water wall,super heater ,air pre-heater,boiler drum, boiler header,water cooled jacket,center cylinder,super-heater bracket,super-heater clamp,tube shield,boiler nozzle,expansion joint pipe,coal feeder,grate bar,tube bend etc.Meanwhile,boiler improvement technical consultation,OEM and ODM is also accepted.
Manufacturer insulating light weight insulating refractory mortar castable is a kind of unshaped refractory made of granular and powdery material, in which add a certain amount of binder and water together. It has high mobility, is suitable for casting construction, and can be hardened without heating. Refractory castables consist of refractory aggregates, powders, binders, admixtures, water or other liquid materials. Generally in the use site, it is molded by pour, vibration or tamping method, and can be used as preforms. Refractory castables are mainly used in the metallurgical industry furnace, also in the petroleum, chemical, building materials, power and machinery industry furnace and thermal equipment.
We could offer you the best refractory castable as following:
1.High alumina castable.
2.low cement refractory castable.
3.corundum castable.
4.Self flowing refractory castable.
5.Corundum mullite castable.
6.Silicon carbide castable.
7.Zirconia Refractory Castable.
8.Lightweight insulation Refractory castable
Features and Advantages of refractory castable:
1. High refractoriness, High refractoriness under load.
2. High density, low porosity.
3. Good slag resistance and corrosion resistance.
4. High strength and wear resistance.
5. Good resistance to flake performance.
6. Good thermal shock stability.
7. Scouring resistance
8. Good hot strength.
Cyclone Dust Collector is a system used to enhance the quality of air released from industrial and commercial processes by collecting dustand other impurities from air or gas. Designed to handle high-volume dust loads, a dust collector system consists of a blower, dust filter, a filter-cleaning system, and a dust receptacle or dust removal system. It is distinguished from air purifiers, which use disposable filters to remove dust.
Multiple-cyclone separators consist of a number of small-diameter cyclones, operating in parallel and having a common gas inlet and outlet, as shown in the figure, and operate on the same principle as single cyclone separatorsâ??creating an outer downward vortex and an ascending inner vortex.
Multiple-cyclone separators remove more dust than single cyclone separators because the individual cyclones have a greater length and smaller diameter. The longer length provides longer residence time while the smaller diameter creates greater centrifugal force. These two factors result in better separation of dust particulates. The pressure drop of multiple-cyclone separators collectors is higher than that of single-cyclone separators, requiring more energy to clean the same amount of air. A single-chamber cyclone separator of the same volume is more economical, but doesn't remove as much dust.
Cyclone separators are found in all types of power and industrial applications, including pulp and paper plants, cement plants, steel mills, petroleum coke plants, metallurgical plants, saw mills and other kinds of facilities that process dust.
Dolomite powder is used as a raw material for the production of high-grade glassware, medicine bottles and optical glass.
Dolomite powder has limited dosage in paints, confined to be used as filler, mainly playing the role of white pigment. However, due to the coarse particles, refractive index and paint solvent similar to the covering power is weak, there is no certain special role in the application, just for the body pigment filler paint.- Used in the building materials and refractory materials, chemical and agricultural, environmental protection, energy conservation and other fields.
- Used in the production of glass and ceramic ingredients;
- Used as refractory inner layer, slag making agent, cement raw material, glass flux, kiln industry, building and decoration stone material, paint;
5479 Gw5250Gjb Cement Mixer Truck (Hino Power Iii) Suppliers
Short on time? Let Gw5250Gjb Cement Mixer Truck (Hino Power Iii) sellers contact you.
