e product overview
The plunger pump high pressure grease ( 200Kfg~350Kfg ) reduced to quantitative valve or workpiece rated pressure range ( 10~200Kgf ). And with the elimination of
Plunger pump produced by the pulsation function.
Grease pump belongs to the plunger structure, pipeline pulsation obviously; And plunger pump for high pressure oil output ( up to hundreds of kilograms of pressure ), while the number of industrial equipment or quantitative valve can not afford such a high pressure, grease relief valve can be high pressure regulating and limiting in the pressure range, thereby protecting equipment or quantitative valve, prolong its service life.
[ ] Products application
Used in high pressure medium input device before the pipeline
Input pressure: 40Mpa
Output pressure: 20Mpa
Oil inlet and outlet: G1/4 "
Material: Carbon steel 7075
13%-15%
Penetration Worked 60
GB/T 269
240-250
Dropping point min
GB/T 4929
135-140
Copper Corrosion
GB/T 7326
pass
Base Fluid Properties
Base Fluid Type
Mineral
Viscosity @40 cst
GB/T 265
185
Viscosity @100 cst
GB/T 265
12
Pour Point
-20
Propertie
Great in anti-water;
Better mechanical invariability;
Better anti-rust;
Good oxidation stability;
Can take place of calcium base and sodium base greases.
This product is made of refined base oil, thickened by fatty acid metallic soap thickener, added with many kinds of additives, for instance, abrasion and extreme pressure resisting, anti-corrosive, antioxidant and rustproof etc.
Shield tail grease is a uniform paste made with grease as the main agent and adding fiber, tackifier, filler and other additives. It mainly plays the functions of sealing, waterproofing, lubrication and anti-corrosion. Shield tail grease is divided into two types: hand-applied grease and pumped grease. Hand-applied grease is used during the launch, and pumped grease is used during the propulsion process.
Application:
1. Good adhesion;
2. Good water resistance;
3. Good water tightness;
4. It has good pumpability in a wide temperature range.
Synthetic technology motor oil specially designed for modern high performance engine with gasoline direct injection (GDI and Turbo-GDI) systems. Developed by latest evolution technology platform EVOTEC fortified with SMART Molecules that improve engine cleanliness and prevent low-sped pre-ignition (LSPI). Outstanding low friction and heat resistance enhance acceleration response, wear prevention and maintaining engine power for better drivability in all situations.
APPLICATION
Designed for high performance gasoline engine both GDI and Turbo-GDI.
Recommended for passenger car, sport car and SUV equipped with start-stop system.
Suitable for all port fuel injection (PFI) gasoline engines running with unleaded gasoline (ULG) and ethanol blended gasoline (E10, E20 and E85).
KEY FEATURES
Enhance excellent engine cleanliness especially in piston and help reduce LSPI occurrence in Turbo-GDI engine by SMART Molecules.
Improve superb engine protection against wear and prevent timing chain elongation for maintaining maximum engine performance.
Outstanding low oil friction with high heat resistance by EVOTEC technology for superior acceleration responsiveness and reduced oil consumption.
Better oil degradation resistance and engine sludge prevention through oil drain intervals.
Product Properties for AdBlue as per the revised ISO22241 standard.
Urea 32,5 % (approximate) solution dissolved within deionised water. As required by SCR equipped vehicles under the provisions of Emissions standards Euro IV (Euro4), Euro V (Euro5) & Euro VI (Euro6).
Urea Content 31.8 33.2 % by weight
Density at 20C 1.0870 1.0930 g/cm
Refracting Index at 20C 1.3814 1.3843
Alkalinity as NH3 0.2 %
Biuret 0.3 %
Aldehyde 5 mg/kg
Insolubles 20 mg/kg
Phosphate (PO4) 0.5 mg/kg
Calcium 0.5 mg/kg
Iron 0.5 mg/kg
Copper 0.2 mg/kg
Zinc 0.2 mg/kg
Chromium 0.2 mg/kg
Nickel 0.2 mg/kg
Aluminium 0.5 mg/kg
Magnesium 0.5 mg/kg
Sodium 0.5 mg/kg
Potassium 0.5 mg/kg
Valves are pipeline accessories used to open and close pipelines, control flow direction, and adjust and control the parameters (temperature, pressure, and flow) of the conveying medium. According to their functions, they can be divided into shut-off valves, check valves, regulating valves, etc.
Valves can be used to control the flow of various types of fluids such as air, water, steam, various corrosive media, mud, oil, liquid metal and radioactive media. Valves are also divided into cast iron valves, cast steel valves, stainless steel valves (201, 304, 316, etc.), chrome-molybdenum steel valves, chrome-molybdenum-vanadium steel valves, duplex steel valves, plastic valves, non-standard custom valves, etc. according to the material.
Grease valve.
- Control the track tensions of any crawler type excavators.
- Can be used in a variable industrial processes
We are the leading manufacturer and supplier of high quality Grease Valve in Korea servicing clients for more than a decade. As one of the most recommended and trusted company in the world, we offer top of the line products which are highly durable and efficient. Our mission is to set high standards in the industry through continuous R&D and process improvement. Our grease valve can be used for piping systems that transfer grease without any mess. Our products are built for heavy-duty industrial applications and can easily suit all your requirements. The advantage of grease valve is that it¡¯s a flow limiting valve and made-up to maintain a specific flow rate, remaining steady all the way through changing pressure influences. Our grease valve can withstand a pressure of MAX 850 kgf/cm2 thus offering high efficiency.
