Specification
1) dielectric antenna
Center frequency1575.42 mhz±3 mhz
V.S.W.R1.5:1
Band width±5 mhz
Impedance50 ohm
Polarization typeR.H.C.P
2) lna/filter
Lna gain(w/o cable)28±2 db typical
Noise figure1.5 db
Dc voltage2.2~5 v
Dc current5~15 ma
3) mechanical
MountingMagnet/adhesive
HousingBlack
CableRg174, 3m or others
ConnectorSma/mcx/smb/bnc/fakra or others
4) environmental
Working temp.-40?~+85?
Humidity55%~75%rh
Waterproof Ip67
The GNSS Module is based on the high performance GNSS engine designed
by our company. The GNSS Module is capable of tracking and processing
with four GNSS (GLONASS, GPS, GALILEO, QZSS) and SBAS (WAAS, EGNOS,
MSAS, GAGAN, SDCM) signals concurrently, which is especially
beneficial in difficult environments such as urban canyons or under
tree canopy. Extended ephemeris® technology allows the user to get
position fix quickly after power-up (within 10 s) with acceptable
accuracy. The GNSS Module features auxiliary functionality such as
Data logger, Odometer and Geo-fencing for easy integration to
customer applications. Communication with the module is accomplished
through a dual serial interface (DUART) that supports NMEA 0183 v4.10
and GSN binary data protocol. 1PPS output enables the use of the
module in precise t iming applications. Modules are offered in
14.3x13.7 mm 24 -pad LCC package.
Key Features
- Concurrent processing of 4 GNSS (GLONASS, GPS, GALILEO, QZSS)
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN, SDCM)
- Standalone and code-differential (RTCM SC104 v2.3) modes
- 1PPS output for precise timing applications
- Positioning update rate up to 10 Hz
- 3 options for different fields of application
- Tracking and positioning sensitivity: -163dBm
- Power consumption:
GPS Mouse provides customer high position, velocity and time accuracy performances as well as high sensitivity and tracking capabilities. Customers benefit from the strength of both companies.
Thanks to the low power consumption technology, the GPS Mouse U8 is ideal for many portable applications such as PDA, Tablet PC, smart phone, automotive etc.
Features
- 72 channel Ublox M8 positioning engine.
- Ultra high sensitivity to -167 dBm.
- GPS L1C/A, SBAS L1C/A, QZSS L1C/A and Galileo E1B/support.
- Supports GLONASS and is ready for Galileo.
- Supports UART, USB and RS232 interface.
- Up to 10 Hz update rate.
- LED indicate location fix.
- Ultra low power consumption.
Ct-G353 utilized SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications.
Performance
- GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy
- High sensitivity navigation engine (PVT) tracks as low as
- GPS : -165 dBm
- GLONASS : -159 dBm52 track verification channels
- SBAS (WAAS or EGNOS,MSAS)
- Active Jammer Remover, removes in-band jammers up to 80 dB-Hz
- Tracks up to 8 CW jammers
- Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support.
- Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds.
- SiRFGeoRecovTM Reverse EE makes position power saving mode.
- Reacquisition Time : 0.1 second
- RF Metal Shield for best performance in noisy environments
Hardware and Software
- Based on the high performance features of the SiRFstarV low power single core logic.
- Adaptive micropower controller
- Only 50 to 500A maintains hot start capability (core logic)
- < 10mW required for TricklePower mode
- RoHS compliant (lead-free)
- Advanced navigation features
- Smart sensor supported by IC interface
- External interrupt input for context change detection
- Dimension : 20 x 20 x 7 ± 0.5mm
Advantages
- Built-in LNA.
- Built-in internal ROM and based on Firmware 5.5.X
- It can remove in-band jammer up to 80db-Hz and track up to 8CW jammers, so the module can prevent GPS signal interference when design-in the electrical device with noisy electrical signal interferences such as Laptop, mobile phone, DSC, etc.
- Maintain tracking sensitivity as low as GPS @ -163dBm, GLONASS @ -161dBm, even without network assistance. (SiRFstar III has only -159dBm sensitivity)
- Support SiRFaware technology
- Support adaptive Micro Power Controller power management mode.
- < 10mW TricklePower, so user can leave power on all day instead of power off.
- Suitable for battery drive devices that need lower power consumption application
Ideal for high volume mass production(Taping reel package)
- Cost saving through elimination of RF and board to board digital connectors
- Flexible and cost effective hardware design for different applications
- Embed CGEE (Client Generated Extended Ephemeris) that can capture ephemeris data from satellites locally and predicts ephemeris up to 3 days. So if the module was off within 3 days, it could complete the positioning process with limited time just like hot start.
SS5-1315 is the GPS module of CSR SiRFstarV. The module is powered by
latest CSR SiRFstarV 5e-based chip, multi-GNSS platform and able to
track GPS and Glonass constellation at the same time.
With DS-Tech proprietary navigation technology that provides you
stable and accurate navigation data. The suitable form factor and
miniature design is the best choice to be embedded in a device such
as portable navigation device, personal locator, speed camera
detector and vehicle locator.
Applications
- Automotive navigation
- Personal positioning and navigation
- Mobile gaming
- Cameras
- Asset Tracking
- Others location-aware consumer devices
Features
- 52 track verification channels.
- Support GPS, GLONASS, QZSS and being deployed for Compass and Galileo.
- Support client-based and server-based SiRF InstantFix TM Extended Ephemeris (EE),
- Embedded CGEE / SGEE (With back-end server support) to speed up TTFF performance.
- Power supply 3.3V voltage.
- SMT type with stamp holes
- Small form factor with embedded SiRF Star V technology.
- Removes in-band jammers up to 80 dB-Hz, tracks up to 8 CW jammers
- Excellent sensitivity for urban canyon and foliage environments.
- Dimension : 13 x 15.2 x 2.2 mm
