Thanks to inherent high conductivity aln aluminum nitride, globaltop materials thermal conductive and electrical insulating tcpa 3030 series are ideally designed for replacement of heat sink and featured with electrical insulated properties for applications in power related industry.
Globaltop materials there are three models available now for different k selection: TCPA3020A, TCPA3025A, AND TCPA3030A. Flame retardant and good for mold injection process. We also provide the consulting service for lED bulb design in different power watt .
The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring.
Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.
Please feel free to contact us for further details
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.
Please feel free to contact us for further details.
POM Regrind from zipper Teeth, industry lump, industry runner
Definition of POM resin (polyformaldehyde resin): polyformaldehyde is a linear polymer without side chain, high density and high crystalline properties. According to different chemical structures in the molecular chain, there are two types of homoformaldehyde and copolymers. of both types of polyformaldehyde density, high crystallinity, melting point, but thermal stability, the treatment temperature range is narrow (about 10oC), slightly lower in acid and alkali stability; The density of formaldehyde, melting point, strength and copolymer is lower, but good thermal stability, not easy to decompose, wide range of treatment temperature (about 50oC), acid and alkali stability are good . Plastic has excellent all-round performance. Good physical, mechanical and chemical properties, especially with excellent friction resistance. It is commonly referred to as steel or strip, which is the general engineering plastic third. Suitable for reducing wear on parts, transmitters, chemicals, tools and other parts.
One of the synthetic resins, also known as polyformaldehyde resin, POM resin and steel, etc. This is a kind of white or black plastic resin with high hardness, high steel and high wear resistance. Used for gears, bearings, auto parts, machine tools, tools, etc.
MATERIAL: POM Regrind from zipper Teeth , industry lump, industry runner
CATEGORY: POM
TYPE: Regrind
SPECIFICATION: from zipper Teeth , industry lump, industry runner,Qty per month 52 mt
Origin: Bangladesh
LOADING WEIGHT: 24 Ton
FOB (USD/Ton): 650$ - 850$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
- High water and nutrition holding capacity
- Enhance strong and healthy root system.
- Perfect growing medium for plants
- Used in green house plantation
Raw material: Coconut fiber.
Block Size: 30 x 30 x 15 cm.
PH: 5.8 to 6.8.
Moisture: 15-20% Max.
Impurities/sand: 3% Max.
Electric Conductivity (E.C):
High EC (Animal Bedding): 3.5 - 5 mS/cm.
Low EC (For Plant Growth) < 0.5 mS/cm.
Packaging: 24ton/con40ft
Promotion Cheap Good Quality A10 Dual Core 1.2-1.5GHz Mini Pos Machine With Printer.
Product Name
HDD-80260
Material
Plastic
Function
Thermal Receipt Printer
Package
Standard Export CartonSize: L 17cm* W 13cm* H 12cm Weight: 1.825kg
Factory Cheap Cash Register Paper Thermal Paper Roll All Sizes Thermal Paper Jumbo Roll For Pos.
Weight: 48gsm, 55gsm, 60gsm, 65gsm, 70gsm
Description :
High bulk, good stiffness
High brightness with less dust, well appearance
Super white at least 3 years image life
High density on color development, high clarity on printing
Well strength, better ink absorption, could be processed after-printing
Never stick on printhead, greatly extended the service life of printhead
Using high quality raw materials, strictly quality control and keep stable quality
HDD-A12Pro Desktop POS System Machine 12.5'' Full HD 1080P Printer Cash Register Pos Swipe Machine Product Name HDD-A12 Pro Material Plastic and Iron Function POS System, Cash Register Package Standard Export Carton Size: L 41cm* W 19cm* H 39cm Weight: 2.8 kg. Interface consists of USB, Serial, HDMI, LAN, SD Card and can be connected to cash drawer. Built-in 58 mm thermal printer with 2D barcode scanner.
HDD-A12Pro Desktop POS System Machine 12.5'' Full HD 1080P Printer Cash Register Pos Swipe Machine.
HDD-A12Pro Desktop POS System Machine 12.5'' Full HD 1080P Printer Cash Register Pos Swipe Machine Product Name HDD-A12 Pro Material Plastic and Iron Function POS System, Cash Register Package Standard Export Carton Size: L 41cm* W 19cm* H 39cm Weight: 2.8 kg. Interface consists of USB, Serial, HDMI, LAN, SD Card and can be connected to cash drawer. Built-in 58 mm thermal printer with 2D barcode scanner.
Zircon, also known as zircon silicate (ZrSiO4), is found in ancient mineral sand deposits. In the form of crystal sands, zircon is typically brown, but could also vary from colourless to yellow-golden, pink and red to blue and green.
The majority of zircon sand is mined in the African continent particularly Nigeria. Current annual global production is in excess of one million tonnes. Almost half of the zircon produced globally is consumed by China, with other significant consuming regions including Europe, North America, Asia-Pacific and India.
With our robust warehouse in Lagos the Southern part of Nigeria we can export 1000MT of this product per month.
The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
Features
Suitable for OR, ER, patient care area, oral, dental procedure, clinics, isolation, IC practices, patients and other applications.
3-ply, non-woven material, 99% BFE at 3 micron.
1. Type: Flat shape, 3-ply, non-sterile
2. Size: For kids
3. Color: Green, blue, pink, white
4. Outer Layer: Water-repellent non-woven
5. Middle Layer: High level static filtration non-woven
6. Inner Layer: Microfilter Thermal-bond non-woven
7. Nose band: PE iron wire
This type Chips that is designed to resist burning and melting at low temperatures.
Low Melting Point Polyester Chip for Hot Melt Yarn Masterbatch
Extrusion Grade Polymer for Hot-melt Adhesive Glue Coating
Description:
Generally speaking, the low melting point polyester chip refers to one specialty polymer with a melting point between 90 and 220.
The melting point of polyester is the temperature at which a solid crystalline substance changes from a solid state to a liquid. So it reflects the purity of polyester. Generally speaking, pure polyester is a partially crystalline polymer with a melting point of 265. But during actual production, some impurities exist in the polyester due to various side reactions. At the same time, the defects of polymer crystals and the difference in crystallinity will also affect the melting point. The common type of low melt polymer is 110. But we can also offer a melting point of 90, 120, 160, and 180.
Application:
Low-melt polyester chips can produce low-melting point fiber, low-melting point synthetic fiber, and thermal-melting mucilage. Its primary usage is acting as bonding fiber in nonwoven fabrics. The end usage lies in clothing, articles for bed, shoe uppers, sleeping bags, sofas, and hygiene products.
LM PET Chip is also the main raw material of masterbatch carriers. That is, low-melt PET chips, conventional chips, and dyes are mixed to produce the polyester color masterbatch according to a certain proportion. The production of this product is the introduction of polyester macromolecules into the modified copolymer unit. And its melting point is in the range of 100-120. Commonly used modifiers are phthalic acid, adipic acid, and trimethylolpropane.
Recently, LM Polymer is also extruded into the back coating of nonwoven, automotive interiors, foam, injection molding, PET sheets, and hot-melt adhesive/glue.
Low Melt Yarn is also called hot melt yarn or fusible yarn. There are sheath-core low-melt bicomponent yarn and full low-melt polyester yarn.
