Find Verified Ggbs Ground Granulated Blast Furnace Suppliers, Manufacturers and Wholesalers

Up to 900 tons p/month Slag cement; granulated blast-furnace (GGBFS) recovered byproduct of the iron manufacturing process MATERIAL IS ALREADY CALCINATED INSIDE THE FURNACE. USD 125.00 P/MT EXWORKS MONTERREY, MEXICO

ctivated carbon is a non-graphite form of carbon which could be produced from any carbonaceous material such as coal, lignite, wood, paddy husk, coir pith, coconut shell, etc. Activated carbon manufactured from coconut shell is considered superior to those obtained from other sources mainly because of small macropores structure which renders it more effective for the adsorption of gas/vapour and for the removal of colour and odour of compounds.
The activated carbon is extensively used in the refining and bleaching of vegetable oils and chemical solutions, water purification, recovery of solvents and other vapours, recovery of gold, in gas masks for protection against toxic gases, in filters for providing adequate protection against war gases/nuclear fall outs, etc. Steam activation and chemical activation are the two commonly used processes for the manufacture of activated carbon. However coconut shell based activated carbon units are adopting the steam activation process to produce good quality activated carbon.

Coconut shell powder is manufactured from matured coconut shells. The manufacture of coconut shell powder is not an organized industry in India. The product finds extensive use in plywood and laminated board industry as a phenolic extruder and as a filler in synthetic resin glues, mosquito coils and agarbathis. Coconut shell powder is preferred to other alternate materials available in the market such as bark powder, furfurol and peanut shell powder because of its uniformity in quality and chemical composition, better properties in respect of water absorption and resistance to fungal attack. The product is manufactured in sizes ranging from 80-200 mesh. Keeping in view of the vast industrial uses, the demand for coconut shell powder appears to be promising.

Virgin coconut oil is also made from the milk extracted from raw kernel. This is done on a small scale by the traditional method which is now partially mechanised or on a large scale by adopting wet processing technology. Coconut milk is fermented and then by mechanical process, water is separated from oil. No heating or application of sunlight or dryer is done for the process.
Qualities: Virgin coconut oil (VCO) is abundant in vitamins, minerals and anti-oxidants, thus making it the 'mother of all oils'. Extracted from fresh coconut kernel without any chemical processes, it is the purest form of coconut oil, water white in colour. Virgin coconut oil is a major source of Lauric Acid and Vitamin E. The virgin coconut oil is free from trans fatty acid, high in medium chain fats (MCFA) or medium chain triglycerides (MCTs) known as lauric acid, which is identical to special group of fats found in human breast milk. VCO is widely consumed as MCT oil for weight loss treatment, etc. MCT's are more easily and rapidly digested than other types of fats, as they require lower amounts of enzymes and bile acids for intestinal absorption. MCT's are metabolized very quickly in the liver and are reported to encourage an increase in energy expenditure, while decreasing fat storage. Numerous studies suggest that substituting MCT Oil for other fats in a healthy diet may therefore help to support healthy weight and body composition. High quality of this oil makes it an ideal massage oil for babies and also for skin and hair applications. It protects the skin from infections caused by bacteria, viruses and fungi, prevents dandruff and hair loss. It even eases muscular pain. Supplement your body with antioxidants. Antioxidant is your body's natural defense against free radicals. It prevents the chain reaction of free radicals and mars sagging and unsightly wrinkles. Rich in Vitamin C and Vitamin E, virgin coconut oil slows down the ageing process and assures the best of life and beauty to your skin. It also helps in the absorption of fat soluble vitamins A, D, E and K.

GGBS (Ground Granulated Blast Furnace Slag) - is a by-product of iron and steel manufacturing, obtained by rapidly cooling molten slag from a blast furnace and then finely grinding it into powder. It is widely used as a cementitious material in concrete production.

GGBS Applications
1) Cement Replacement - Used in blended cements (PSC, PPC) for greener products.
2) Ready Mix Concrete Production -Enhances workability, strength, durability and lifespan of structures
3) Road Infrastructure - Used in Pavements, Bridges, Tunnels for longevity.
4) Marine & Underground Structures - Provides high resistance to chloride and sulphate attacks

Features Of Granulated Blast Furnace Slag (GBFS)

Granulated Blast Furnace Slag or GBFS is formed when Blast Furnace Slag or BFS is successively at a fast rate quenched from the furnace rather than left for cooling. It has a density of about 60% to 70% that of natural sand. This material has a much increased resistance to sulfate attack.

This eventually leads to better performance in countering acids of any type. In GBFS, no type of reaction related to alkali and silica occurs. Also the material provides a huge saving in connection to carbon dioxide emission which is an extra boon. What constitutes GBFS are its properties that consist of durability, appearance, higher ultimate strength than concrete which is made up of Portland cement and high sustainability level of the product made out of this material.

About THE Product :
Blast furnace slag is used in the production of cement (iron Portland and blast furnace cement).
Air-cooled blast furnace slag is formed by allowing the molten slag to cool relatively slowly under ambient conditions; final cooling can be accelerated with a water spray. The cooled material is hard and dense, although it can have a vesicular texture with closed pores. After crushing and screening, air-cooled slag can be used in several applications.
Granulated slag is formed by quenching molten slag in water to form sand-sized particles of glass. The disordered structure of this glass gives the material moderate hydraulic cementitious properties when very finely ground into granulated blast furnace slag, but if it can access free lime, the granulated blast furnace slag develops strong hydraulic cementitious properties.
Pelletized or expanded slag is cooled through a water jet, which leads to rapid steam generation and the development of innumerable vesicles within the slag. The vesicular texture reduces the overall density of the slag and allows for good mechanical binding with hydraulic cement paste.
Blast Furance Slag is a nonmetallic co-product which is produced in the process of iron manufacturing, Granulated Blast Furnace Slag is a glassy granular material formed when molten blast furnace slag is rapidly cooled by direct water.
Rapid cooling prohibits the formation of crystals and forms glassy, non-metallic, silicates and alumino silicates of calcium.


GBFS : (Granulated Blast Furnace Slag)
Source : Granulated BF Slag From Gujarat State, India
Supply Quantity : 50,000 Metric Tons Per Month
Packing: Bulk

Parameters (% BY MASS)
CaO 30-38
Al2O3 15-20
SiO2 30-40
Glass Content 85-97
MgO 8-11
Fe2O3 0.5-1.5
Moisture 10 MAX
Size -5mm Min 95, +5 mm Max 5
Relative Gravity 2.9
Bulk Density(Bagged) 1200 KG/M3

50 kg of Pyrite ore
Method code, Iml-101

As-2.1ppm.
Bi-0.80ppm
Co-451.5ppm
Cu-3.2ppm
Pb-1.7ppm
Ni-94ppm
Mo-1.9ppm
Zn-27ppm
A1203-7.84wt%
Fe203-27.23wt%
MgO-9.22wt%

1. Fineness (m2 /kg): 370.
2. Soundness le-chatelier expansion (mm): nil.
3. Initial setting time (min)
Not less than opc:220.
4. Insoluble residue(%):0.05
5. Magnesia content (%):9.5
6.Sulphide sulphar(%):0.60
7. Sulphite content (%):0.10
8. Loss on ignition (%):0.309. Manganese content (%):0.06
10. Chloride content(%):0.003
11. Moisture content(%):0.005
12. Glass content(%):94
13. Compressive strength (n/mm2):
After 7 days34.0
After 28 days53.0
14. Chemical moduli
A). Cao + mgo + sio2 :84.0
B). Cao + mgo /sio2 :1.30
C). Cao/sio2 :1.05.





Tonnes( 1 tnnes and 1.5 tones in jumbo bags).

Ground granulated blast furnace slag

1. Fineness (m2 /kg): 370.
2. Soundness le-chatelier expansion (mm) : nil.
3. Initial setting time (min)
Not less than opc:220.
4. Insoluble residue(%):0.05
5. Magnesia content (%):9.5
6.Sulphide sulphar(%):0.60
7. Sulphite content (%):0.10
8. Loss on ignition (%):0.30
9. Manganese content (%):0.06
10. Chloride content(%):0.003
11. Moisture content(%):0.005
12. Glass content(%):94
13. Compressive strength (n/mm2):
After 7 days34.0
After 28 days53.0
14. Chemical moduli
A). Cao + mgo + sio2 :84.0
B). Cao + mgo /sio2 :1.30
C). Cao/sio2 :1.05.




Tonnes packed in i tonne or i.5 jumbo bags.