Geotube dewatering units are geo-synthetic containers,, made from high tensile woven polypropylene. Essentially a Geotube unit is a large dewatering bag. The special fabric of Geotube units allows for the retention of consolidated valuable nutrients and the dispersal of clear effluent. The Geotube technology has proven it is effectiveness in providing de-watering and filtration for lagoons, municipal sludge, raw septage as well as a host of other industries around the world since 1982.Mechanical PropertiesTest MethodMinimum Average (English)Minimum Average (Metric)Mass/UnitASTM D-52618.0 oz/yd²271 g/m²Grab Tensile Strength(MD x CD)ASTM D-4632240 x 240 Ibs1068 x 1068 NGrab Tensile ElongationASTM D-463270 x 70 %70 x 70 %Trapezoidal TearASTM D-453390 x 90 Ibs400 x 400 NCBR PunctureASTM D-6241630 Ibs2802 NApparent Opening Size(AOS)ASTM D-475180 US Std.Sieve0.18 mmPermittivityASTM D-44911.5 sec-11.5 sec-1Water Flow RateASTM D-449195 gal/min/ft�²3870 L/min/m�²UV Resistance(% retained after 500 hours)ASTM D-435580 %80 %Advantages of Geotube�® dewatering units:- High volume containment- Opportunity to spread project costs over several years- Rapid flow through rate- Drastic reduction in disposal cost- Lower capital cost- Simplicity
Hollow Section steel Tube is the general name for the steel pipe other than thecircular steel pipe. Such as square, rectangle, oval,elliptical, cone, trapezoidal, spiral, etc. Different steel pipe can more adapt to the particularity of use conditions, save metal and improve the labor productivity of parts manufacturing. It is widely used in aviation, automobile, shipbuilding, mining machinery, agricultural machinery, construction, light textile and boiler manufacturing. The methods of producing different pipes are cold pulling, electric welding, extrusion and hot rolling, etc. Compared with the round tube, the different tubes generally have a larger moment of inertia and cross section modulus, and have a large bending resistance and torsion resistance, which can greatly reduce the structural weight and save steel.
We deals in the following products of India, China, Taiwan and Korea Origin:-
Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc)
Stainless steel tube is a hollow long strip steel made of stainless-steel material. Because of its excellent corrosion resistance, it is mainly widely used in petroleum, chemical, medical, food, light industry, mechanical instruments and other industrial transportation pipelines and mechanical structural components. In addition, when the bending and torsion strength are the same, the weight is light, so it is also widely used in manufacturing mechanical parts and engineering structures, but also commonly used in the field of furniture decoration.
Stainless steel pipe is divided into seamless pipe and welding pipe according to the production mode, seamless steel pipe can be divided into hot rolling pipe, cold rolling pipe, cold pulling pipe and extrusion pipe, etc., cold pulling and cold rolling is the secondary processing of steel pipe; welding pipe is divided into straight welding pipe and spiral welding pipe.
Stainless steel pipes can be divided into round tubes and different tubes according to the cross-sectional shape. The form tubes have rectangular tubes, rhomboid tubes, ellipse tubes, hexagonal tubes, octagonal tubes and various cross-sectional asymmetric tubes.
It can be divided into Austenitic Stainless Steel Tube Ferritic Stainless Steel Tube Martensitic Stainless Steel Tube and Duplex Stainless Steel Tube by the type of stainless steel.
Cast Iron and Ductile Iron tube and fittings PL739
Cast Iron and Ductile Iron tube and fittings can be offered by our comapny to meet different engineering needs.
The difference between ductile iron and gray iron
1. Different chemical composition
Nodular cast iron contains nodular graphite, which can improve its toughness and strength, while reducing brittleness. Gray cast iron contains a lot of carbon, so that its hardness and wear resistance is high, but the toughness is poor.
2. Different organizational structures
The structure of nodular cast iron contains nodular and ferrite, and the distribution of nodular is uniform. While the structure of gray cast iron is mainly ferrite and pearlite, and the distribution of pearlite is uneven.
3. Different performance
Ductile iron has high strength and toughness, and has good corrosion resistance. It is uitable for the manufacture of high load and high pressure parts. The hardness and wear resistance of gray cast iron are high. It is suitable for the manufacture of friction and wear parts.
Application field
Cast iron : because of its low strength and good vibration resistance. It is often used in the production of parts under compressive stress, such as box, base, etc.
Ductile iron : because of its high strength and good toughness. It is often used in the manufacture of parts requiring high strength and toughness, such as crankshaft, connecting rod and so on.
Innovative technology of pre-materials suitable for gas springs
welded and drawn according to ASTM A213
various ID tolerance requirement of H8, H9, H10 and H11
surface roughness below 15RA (0.40 �¼m)
mechanical properties are controlled to endure excessive stress
hardness, tensile strength, yield strength and elongation
servicing high precision pneumatic cylinder applications
High Precision Steel Pipe for Gas spring Cylinder
Type:Seamless and Welded Steel Tube
Roughness 0.1-0.8ra
Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020
Surface:Black/bright
Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101
Size :OD 3mm-140mm Thickness 0.5-20mm
Processing :Cold rolled /cold drawn
1. BK (+C) No heat treatment after last cold forming process.
2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing)
3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed.
4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere.
5. NBK (+N) After the final cold forming process the tubes are annealed above the upper
Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request.
Usage: Gas Spring Cylinder
Aluminum alloy is one of the most widely used non-ferrous structural materials in industry. It has been widely used in aviation, aerospace, automobile, machinery manufacturing, shipbuilding and chemical industry. With the rapid development of science and technology and industrial economy in recent years, the demand for aluminum tube and aluminum tube is increasing day by day. The production process of aluminum tube generally adopts the production process of ingot heating - extrusion - finishing. For aluminum alloy materials that can be strengthened by heat treatment, quenching and aging treatment should also be carried out. Hard alloy and high magnesium aluminum alloy pipes generally adopt the production process of cold rolling extruded tube billet first, and then stretching out finished products.
Parameter
Product Name : Aluminum tube
Price range : $1000-$2000 Discounts are available for large orders
Minimum order quantity : 1 ton
Specifications
Thickness 1-50mm, External diameter3-900mm,or according to requirements
Standard : ASTM, JIS, DIN, GB,
Steel Grade : ASTM B210/B241 JIS H4080 DIN 1725-1-1986
Test : Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, Hydro static Test, X-ray Test.
certification : ISO,SGS,BV,TUV,
Processing Service : Welding, Drilling, Cutting, Bending
Packing : Wooden pallet or according to customer's request
Lead time : 7 to 15 working days
Payment terms : T/T ,LC
Exporting country : Europe: Norway, Romania, Hungary, Austria
South America: Chile, Argentina, Colombia, Venezuela , etc
Warehouse Storage : Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project
Classification : Copper Pipes
A type of non-ferrous metal pipe, often divided into brass and copper pipes, is pressed and drawn seamless pipe. Copper pipe has good electrical conductivity, thermal conductivity characteristics, electronic products of conductive parts and heat dissipation parts of the main material, and has become a modern contractor in all residential commercial housing water pipeline, heating, cooling pipe installation of the first choice. Copper pipe has strong corrosion resistance and is not easy to oxidize.
