Champion Synthetic Multi-Vehicle CVT Fluid is purpose built for the unique high friction and shear stability demands of belt and chain type continuously variable transmission. Synthetic oil and carefully balanced additives give the fluid performance characteristics that meet or exceed the quality of OEM fluids.
High oxidation stability
Excellent shear stability
Optimized viscosity
Excellent wear protection
Excellent resistance to foaming
Friction durability
Good wet clutch performance
Excellent low-temperature performance
Champion Synthetic Multi-Vehicle CVT Fluid meets or exceeds the following specifications or is suitable for use as a service-fill replacement for the following products:
Audi/VW TL 52180, G 052 180, G052 516
BMW 83220136376, 83220429154, (EZL 799/799A)
Daihatsu Ammix CVTF-DC, CVTF-DFE*
Dodge/Jeep NS-2, CVTF+4, Mopar CVT 4
Ford CFT30/WSS-M2C933-A / Motorcraft XT-7-QCFT, MERCON C, CVT23
GM/Saturn DEX-CVT, CVTF I-Green2*
Honda HMMF, HCF-2
Hyundai/Kia SP-CVT 1
Mazda CVTF 3320
Mercedes Benz CVT28, MB-Approval 236.20
Mini Cooper EZL 799 / 799A, ZF CVT V1
Mitsubishi DiaQueen CVTF J1, CVTF J4* Nissan NS 1, NS 2, NS 3*
Punch EZL 799 / 799A
Renault Elfmatic NS 2
Subaru e-CVTF, i-CVTF, Lineartronic CVTF, K0425Y0710, CV-30
Suzuki CVTF Green 1, CVTF Green 2*, CVTF 3320, TC, NS 2
Shell Green 1V
Toyota/Lexus TC, FE
Application Field:
Ethanol has many USES.First of all, ethanol is an important organic solvent, widely used
in medicine, paint, sanitary products, cosmetics, oils and other fields.
Secondly, ethanol is an important basic chemical raw material, which is used for manufacturing acetaldehyde, ethylamine, ethyl acetate, acetic acid, etc., and derives many intermediates of medicine, dye, paint, perfume, synthetic rubber, detergent,
pesticide and other products.Thirdly, 75% ethanol aqueous solution has strong bactericidal ability and is a commonly used disinfectant in medical treatment.Finally, similar to methanol, ethanol can be used as an energy source. In 2017, various ministries and commissions in China jointly issued relevant policies to promote the nationwide use of vehicle ethanol-fueled gasoline by the end of 2020.
Product Name
Ethanol absolute
Classification
Alcohol
CAS No
64-17-5
Molecular weight
46.06840
Drained battery scrap (free of battery acid/fluid) including lead plates and plastic/rubber casing complete with caps.
Purity : Complete Battery with full contents, except the liquid
Car batteries are treated as hazardous waste.
Material Origin : Car Battery / Van Battery / marine batteries and industrial traction batteries.
Drained Lead Car Battery Scraps (Rains)
Drained Lead-Acid Battery Scrap (RAINS per ISRI Specifications).
Our Acid Battery Scrap on 99.99%. .
Automotive Waste Batteries completely washed, cleaned with lead acid contents.
RAINs per ISRI Specifications) (Product Detailed SpecWET/DRY WHOLE INTACT CAR LEAD BATTERIES(RINKs and ifications)
height :116mm and whight :310 gr
height :123mm and whight :350 gr
Used Auto Battery Scrap
Drained lead battery scraps
Lead Battery Plate Scrap Type Battery Scrap 20D 16H
Lead Battery Plates Scrap
Lead Battery Plate Scrap Type soft lead scrap
Drained / Dry Whole Intact Lead Batteries (RAINS)
Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS)
SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES :
To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable.
Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS)
6V1.3AH sealed lead acid battery.
1/Product Specification:
Item No.:DHB613;
Voltage:6V;
Normal capacity:1.3AH/20hr;
Dimension(L*W*H):97*24*52mm;
Total height(with terminal):57mm;
Weight:0.30kg;
2/Product Feature:
(1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life.
(2)Low self-discharge rate, small internal resistance.
(3)The unique construction and sealing techniques of the battery,
add the ABS plastic crust that guarantee leakproof operation in and
position with no adverse effect to capacity or service life.
(4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability.
This type Chips that is designed to resist burning and melting at low temperatures.
Low Melting Point Polyester Chip for Hot Melt Yarn Masterbatch
Extrusion Grade Polymer for Hot-melt Adhesive Glue Coating
Description:
Generally speaking, the low melting point polyester chip refers to one specialty polymer with a melting point between 90 and 220.
The melting point of polyester is the temperature at which a solid crystalline substance changes from a solid state to a liquid. So it reflects the purity of polyester. Generally speaking, pure polyester is a partially crystalline polymer with a melting point of 265. But during actual production, some impurities exist in the polyester due to various side reactions. At the same time, the defects of polymer crystals and the difference in crystallinity will also affect the melting point. The common type of low melt polymer is 110. But we can also offer a melting point of 90, 120, 160, and 180.
Application:
Low-melt polyester chips can produce low-melting point fiber, low-melting point synthetic fiber, and thermal-melting mucilage. Its primary usage is acting as bonding fiber in nonwoven fabrics. The end usage lies in clothing, articles for bed, shoe uppers, sleeping bags, sofas, and hygiene products.
LM PET Chip is also the main raw material of masterbatch carriers. That is, low-melt PET chips, conventional chips, and dyes are mixed to produce the polyester color masterbatch according to a certain proportion. The production of this product is the introduction of polyester macromolecules into the modified copolymer unit. And its melting point is in the range of 100-120. Commonly used modifiers are phthalic acid, adipic acid, and trimethylolpropane.
Recently, LM Polymer is also extruded into the back coating of nonwoven, automotive interiors, foam, injection molding, PET sheets, and hot-melt adhesive/glue.
Low Melt Yarn is also called hot melt yarn or fusible yarn. There are sheath-core low-melt bicomponent yarn and full low-melt polyester yarn.
FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes.
PRODUCT COMPATIBILITY:
FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel.
PRODUCT APPLICATIONS:
FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids.
Specifications:-
PRODUCT : FH-35 FH-38 FH-42
CAS No. : 9000-30-0 9000-30-0 9000-30-0
Granulation : FINE FINE FINE
APPEARANCE : OFF WHITE POWDER
MOISTURE : 8% Max. 8% Max. 8% Max.
PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max
ASH : 1.5% Max. 1.5% Max. 1.5% Max.
ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max.
CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min
pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5
VISCOSITY :
(0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42
5 Mins : 37 5 Mins : 39 5 Mins : 43
30 Mins : 39 30 Mins : 42 30 Mins : 45
60 Mins : 40 60 Mins : 43 60 Mins : 47
Linear Alkylbenzene Sulfonic Acid(LABSA . LAS)96%
Linear Alkyl Benzene Sulphonic Acid (LABSA) 96% is the largest-volume synthetic surfactant that is widely used in the formulation of Domestic Detergent Powder, Cake & Dish wash cleaners. It constitutes the formulation of industrial cleaners and also acts as emulsifier and coupling agent.
Full name: Linear Alkyl Benzene Sulphonic Acid
Other name: LABSA, DBSA ;Dodecyl Benzene Sulphonic Acid;Dodecyl Benzene Sulfonic Acid ; Linear Alkyl Benzene Sulfonic Acid ; DDBSA
CAS: 27176-87-0
EINECS No.: 248-289-4
Molecular Formula: R-C6H4-SO3H
Molecular Weight:323
HS Code: 34021100.00
Drained battery scrap (free of battery acid/fluid) including lead plates and plastic/rubber casing complete with caps.
Purity : Complete Battery with full contents, except the liquid
Car batteries are treated as hazardous waste.
Drained / Dry Whole Intact Lead Batteries (RAINS)
Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS)
SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES :
To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable.
Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS)
6V1.3AH sealed lead acid battery.
1/Product Specification:
Item No.:DHB613;
Voltage:6V;
Normal capacity:1.3AH/20hr;
Dimension(L*W*H):97*24*52mm;
Total height(with terminal):57mm;
Weight:0.30kg;
2/Product Feature:
(1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life.
(2)Low self-discharge rate, small internal resistance.
(3)The unique construction and sealing techniques of the battery,
add the ABS plastic crust that guarantee leakproof operation in and
position with no adverse effect to capacity or service life.
(4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability.
Description
A natural, multi-benefit fluid foundation.
Ultra-light texture blends seamlessly with skin.
Powered by exclusive Sustainable Moisture Complex & a Revival Plant Extract.
Delivers a surge of fresh radiance while moisturizing skin.
Reduces the appearance of fine lines & imperfections.
Gives sheer to medium coverage.
Protects skin against harmful UV rays with SPF 20/PA+++.
Creates a dewy, plump, natural & flawless complexion.
Dermatologist-tested & ophthalmologist-tested.
Light Cycle Oil (LCO) is a diesel boiling range product from Fluid Catalytic Cracking Units (FCCUs). FCCU is responsible for the production of petrol, LPG and Light Cycle Oil (LCO).
There are various ways of economically upgrading LCO, which include hydrotreating, high pressure hydrocracking for full conversion of LCO into Naphtha and a more optimized partial conversion hydrocracking process.
It can be used in susch industries as Agrochemical, Crude Oil, Petrochemicals, Petroleum Products.
For latest pricing Enquiry, Please contact us on our email and contact details
Light Cycle Oil (LCO) is a diesel boiling range product from Fluid Catalytic Cracking Units (FCCUs). FCCU is responsible for the production of petrol, LPG and Light Cycle Oil (LCO). There are various ways of economically upgrading LCO, which include hydrotreating, high pressure hydrocracking for full conversion of LCO into Naphtha and a more optimized partial conversion hydrocracking process. It can be used in susch industries as Agrochemical, Crude Oil, Petrochemicals, Petroleum Products.
Polyacrylamide is a synthetic polymer composed of acrylamide monomers and is widely used in various industrial, environmental, and scientific applications. It comes in various forms, including powder, liquid, and gel. In water treatment, polyacrylamide is employed as a flocculant and coagulant to separate and remove suspended particles and impurities, aiding in the purification of drinking water and wastewater treatment. Additionally, it plays a crucial role in the petroleum industry for enhanced oil recovery and in agriculture for soil conditioning and erosion control. In the laboratory, it serves as a gel for electrophoresis in DNA and protein analysis. Its versatility in facilitating solid-liquid separation and its ability to modify the rheological properties of fluids make polyacrylamide a valuable polymer in a range of practical applications.
We have top quality drained acid car batteries scrap for sale at desirable quantities and at very good negotiable prices. We ship to all destinations. contact now with your email address so that we can send you more details directly.
Drained battery scrap (free of battery acid/fluid) including lead plates and plastic/rubber casing complete with caps.
Purity : Complete Battery with full contents, except the liquid
Car batteries are treated as hazardous waste.
Drained / Dry Whole Intact Lead Batteries (RAINS)
Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS)
SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES :
To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable.
Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS)
6V1.3AH sealed lead acid battery.
1/Product Specification:
Item No.:DHB613;
Voltage:6V;
Normal capacity:1.3AH/20hr;
Dimension(L*W*H):97*24*52mm;
Total height(with terminal):57mm;
Weight:0.30kg;
2/Product Feature:
(1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life.
(2)Low self-discharge rate, small internal resistance.
(3)The unique construction and sealing techniques of the battery,
add the ABS plastic crust that guarantee leakproof operation in and
position with no adverse effect to capacity or service life.
(4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability.
1. Characteristic: It is a white and colloidal micro-particle with its primary micro-particle from 5-40 nm and has obvious properties such as thixotropy, reinforcing, thickening and filling etc. and is insoluble in all kinds of solvents and liquids except hy-drofluoric acid and concentrated bases.
2. Specification: Q/SHG19-2008ItemIndex
Product: LM200
Apparent: White solid colloidal micro-particle
Specific surface area m2/g: 150�±15
PH value3.6~4.3
Heating loss weight % (m/m) â?¤1.0
Burning loss weight % (m/m) â?¤1.0
Apparent density g/Lâ?¤60
3. Uses: It is used widely in silicone rubber, construction sealant, coating, electron and electric, aerospace, medicine and medical material, resin processing, printing ink, pesticide and other industries.
LM-150: used widely in silicone acid rubber, sulfurized silicone rubber in ambient temperature (low water content), silicone neutral rubber.
LM-200: used widely in sealing ring, sealing gasket, petroleum pipeline, insulator, tablet powdered preparation, artificial viscera, infusion tube, latex nipple and high quality oil ink.
LM-300: used widely in resin thickener, thickness agent for synthetic lubricating ester, resin thixotropic agent for electronic component.
LM-380: used widely in reinforcing agent for silicone rubber, medical silicone rubber for transparent artificial organs and artificial heart etc.
4. Packing: packed with multi-layer paper plastic compound bag with net weight of 5 kg or 10 kg, or packed by whole plastic seal for users having special demand on water content.
5. Store and transport: placed in vent and dry storehouse and prevented from humid, water, pressure and throwing during transport.
We have top quality drained acid car batteries scrap for sale at desirable quantities and at very good negotiable prices. We ship to all destinations. contact now with your email address so that we can send you more details directly.
Drained battery scrap (free of battery acid/fluid) including lead plates and plastic/rubber casing complete with caps.
Purity : Complete Battery with full contents, except the liquid
Car batteries are treated as hazardous waste.
Drained / Dry Whole Intact Lead Batteries (RAINS)
Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS)
SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES :
To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable.
Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS)
6V1.3AH sealed lead acid battery.
1/Product Specification:
Item No.:DHB613;
Voltage:6V;
Normal capacity:1.3AH/20hr;
Dimension(L*W*H):97*24*52mm;
Total height(with terminal):57mm;
Weight:0.30kg;
2/Product Feature:
(1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life.
(2)Low self-discharge rate, small internal resistance.
(3)The unique construction and sealing techniques of the battery,
add the ABS plastic crust that guarantee leakproof operation in and
position with no adverse effect to capacity or service life.
(4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability.
Latitude 3420 Laptop computer,Up to 11th Gen In-tel Celeron Coreâ?¢ i7 processors offer businesses the performance, manageability, built-in security features and stability of In-tel�® and align to a future-proof roadmap. Download and smoothly run graphic-intensive applications with optional N-VIDIA MX450.
Multi-Ports
Compatible with more monitors and accessories, with a full range of available ports,
including USB 3.2 Gen2x2 Type-Câ?¢ port and legacy ports like HD-MI and RJ45.
Model
Latitude 3420
Processor
In-tel Celeron 6305U, Processor speed Up to 1.80 GHz,
10th Generation In-tel Core i3-1005G1, Processor speed from 2.40 GHz to 3.40 GHz
11th Generation
In-tel Core i3-1115G4, Processor speed from 3.0 GHz to 4.10 GHz
In-tel Core i5-1135G7, Processor speed from 2.40 GHz to 4.20 GHz
In-tel Core i5-1145G7, Processor speed from 2.60 GHz to 4.40 GHz
In-tel Core i7-1165G7, Processor speed from 2.80 GHz to 4.70 GHz
Memory
1 TB SATA 2.5-in. 5400 rpm, hard drive
500 GB SATA 2.5-in. 7200 rpm, hard drive
Up to 512 GB PCIe NVMe Gen3x4 M.2 2230 solid-state drive
Up to 1 TB PCIe NVMe Gen3x4 M.2 2280 solid-state drive
Number of cameras
