Model Number : Card Extender fpc cable
Type : FPC
Place of Origin : Guangdong, China
Brand Name : EM Service
Base Material : Polyimide/polyester
Copper Thickness : 1oz / 1/2 o z/ 1/3 oz
Board Thickness : 0.07-0.5MM
Min. Hole Size : 0.1MM
Min. Line Width : 0.04MM
Min. Line Spacing : 0.04MM
Surface Finishing : HASL / OSP / ENIG / Immersion silver/Tin/Ni
Board Size : 400mmX800mm
Product name : SIM Card Extender with push slot fpc flat cable
Application : Consumer Electronics
PI thickness : 25m / 12.5m
Stiffener material type : PI / FR4 / PET / Steel piece
Assembly Service : SMD SMT
Outline profile : Punching / Laser cut / Drilled
Solder mask color : Yellow. Optional
Acceptable file format : CAD/Gerber file/powerpcb/Autocad/Orcad/P-cad/CAM-350/CAM2000
Adhesive : 13m
USB 2.0 to type-c male FPV Flat Slim Thin Ribbon FPC Cable, USB 3.1 Type-c to standard USB A for FPV gimbal, Please notice that it is USB end NOT HDMI.FFC USB FPV flat slim thin USB cable, ideal for FPV gimbal rigs and applications in tight space/rooms, Can directly transmit AV signal and for sync and charging. Very soft, lightweight, flexible, thin slim USB cable. low profile. less than 5g.
Micro USB up angle to USB 3.1 type-C male FFC FPV Flat Slim Thin flexible FPC Cable, Micro USB 90 to standard Type-c for FPV gimbal, Please notice that it is USB end NOT HDMI.FFC USB FPV flat slim thin USB cable, ideal for FPV gimbal rigs and applications in tight space/rooms, Can directly transmit AV signal and for sync and charging. Very soft, lightweight, flexible, thin slim USB cable. low profile. less than 5g.
40225 Fpc Cables Suppliers
Short on time? Let Fpc Cables sellers contact you.
Micro USB Down angle to Micro USB Down angle FFC FPV Flat Slim Thin flexible FPC Cable, Micro USB down angle to down angle for FPV gimbal, Please notice that it is USB end NOT HDMI.FFC USB FPV flat slim thin USB cable, ideal for FPV gimbal rigs and applications in tight space/rooms, Can directly transmit AV signal and for sync and charging. Very soft, lightweight, flexible, thin slim USB cable. low profile. less than 5g.
JC ear speaker receiver FPC flex cable with JCID receiver test board for iPhone X-13 Pro Max, solving the problems of no auto photosensitive and no true tone caused by damaged or missing original FPC flex. JCID X-13PM receiver detection adaptor works with JCID V1SE/V1S Pro programmer and JC earpiece distance photosensitive sensor cable fixes iPhone Face ID true tone problem.
Option:
1. JC receiver FPC board for iPhone 8-13 Pro Max(works with JCID V1SE/V1S Pro only).
2. JC receiver FPC sensor flex cable for iPhone X/XS/XS MAX/XR/11/11PRO/11 Pro Max/12 Pro/12 Pro Max/12 mini/SE2/13/13 mini/13 Pro/13 Pro Max.
Functions:
1. The receiver FPC controls True Tone and also acts in the Face ID process.
2. The receiver is often broken by a screen change and until now has not been replaceable.
3. The add-on board when connected to the V1SE/V1S PRO will enable the programming of a new receiver and fix missing True Tone and Face ID not available.
(If your Face-ID error is move a little higher this is a different fault and different repair procedure).
Feature:
1. Support to repair iPhone X-13 Pro Max face ID truetone problem caused by receiver FPC Failure, and not require original receiver FPC.
2. Receiver FPC detecting adaptor is for working on JC V1SE and V1S Pro, which support repair 8-13 Pro Max full series face lD true tone problem caused by receiver FPC failure, no require original receiver FPC.
3. JC ear speaker receiver FPC flex cable with JCID receiver test board for iPhone X-13 Pro Max, solving the problems of no auto photosensitive and no true tone caused by damaged or missing original FPC flex.
4. JCID X-13PM receiver detection adaptor works with JCID V1SE/V1S Pro programmer and JC earpiece distance photosensitive sensor cable fixes iPhone Face ID true tone problem.
1>Available length:50CM
2>Super soft and very light .only 5 g
3>Micro HDMI Male to MINI HDMI Male interface(MICRO D-1 to Mini C-1)
90 degree down angled hdmi cable
4>Micro HDMI interface compatible with GH4 BMPCC.A5000 A6000 A7S A7R etc;
Mini HDMI male interface for 5D3 5D2 GH3 GH2 5N 5T 5R 7N
5>strong anti-interference capacity
1>Available length:50CM
2>Super soft and very light .only 5 g
3>Micro HDMI Male to MINI HDMI Male interface(MICRO D-1 to Mini C-1)
90 degree down angled hdmi cable
4>Micro HDMI interface compatible with GH4 BMPCC.A5000 A6000 A7S A7R etc;
Mini HDMI male interface for 5D3 5D2 GH3 GH2 5N 5T 5R 7N
5>strong anti-interference capacity
Question: Hi is it possible to remove the USB and solder wires to the +5v and GND terminals by hand?
Answer: Yes, the USB plug can be removed. you can unlock the latch /little black holder. It can be soldered. please be very swift and control the temperature around 200 degrees (lower temperature ) while soldering
Question: Please can you confirm the length I ordered one and it was only 50mm (5cm) long, not 50cm as per the title.
Answer: Hello It should be 50cm. please contact the seller and send them the photo for exchange (there is contact on the warranty card)
Available length:50CM
Super soft and very light .only 5 g
Micro HDMI Male to MINI HDMI Male interface(MICRO D-1 to Mini C-1)
90 degree down the angled HDMI cable
Micro HDMI interface compatible with GH4 BMPCC.A5000 A6000 A7S A7R etc;
Mini HDMI male interface for 5D3 5D2 GH3 GH2 5N 5T 5R 7N
Dot matrix projector Face ID repair i2C infrared FPC cable dot matrix empty cable, Phone 13 series i2C infrared dot matrix empty cable broken line repair and replacement of damaged surface cable??
Features:
1. High precision pad through hole design, more stable welding.
2. Precise alignment welding by one operating.
3. Laser cutting smooth craftsmanship, soft and durable.
4. Original appearance, high technology.
Model Number : Card Extender fpc cable
Type : FPC
Place of Origin : Guangdong, China
Brand Name : OEM Service
Base Material : Polyimide/polyester
Copper Thickness : 1oz / 1/2 o z/ 1/3 oz
Board Thickness : 0.07-0.5MM
Min. Hole Size : 0.1MM
Min. Line Width : 0.04MM
Min. Line Spacing : 0.04MM
Surface Finishing : HASL / OSP / ENIG / Immersion silver/Tin/Ni
Board Size : 400mmX800mm
Product name : SIM Card Extender with push slot fpc flat cable
Application : Consumer Electronics
PI thickness : 25m / 12.5m
Stiffener material type : PI / FR4 / PET / Steel piece
Assembly Service : SMD SMT
Outline profile : Punching / Laser cut / Drilled
Solder mask color : Yellow. Optional
Acceptable file format : CAD/Gerber file/powerpcb/Autocad/Orcad/P-cad/CAM-350/CAM2000
Adhesive : 13m
JC ear speaker receiver FPC flex cable with JCID receiver test board for iPhone X-13 Pro Max, solving the problems of no auto photosensitive and no true tone caused by damaged or missing original FPC flex. JCID X-13PM receiver detection adaptor works with JCID V1SE/V1S Pro programmer and JC earpiece distance photosensitive sensor cable fixes iPhone Face ID true tone problem.
Option:
1. JC receiver FPC board for iPhone 8-13 Pro Max(works with JCID V1SE/V1S Pro only).
2. JC receiver FPC sensor flex cable for iPhone X/XS/XS MAX/XR/11/11PRO/11 Pro Max/12 Pro/12 Pro Max/12 mini/SE2/13/13 mini/13 Pro/13 Pro Max.
Functions:
1. The receiver FPC controls True Tone and also acts in the Face ID process.
2. The receiver is often broken by a screen change and until now has not been replaceable.
3. The add-on board when connected to the V1SE/V1S PRO will enable the programming of a new receiver and fix missing True Tone and Face ID not available.
(If your Face-ID error is move a little higher this is a different fault and different repair procedure).
Feature:
1. Support to repair iPhone X-13 Pro Max face ID truetone problem caused by receiver FPC Failure, and not require original receiver FPC.
2. Receiver FPC detecting adaptor is for working on JC V1SE and V1S Pro, which support repair 8-13 Pro Max full series face lD true tone problem caused by receiver FPC failure, no require original receiver FPC.
3. JC ear speaker receiver FPC flex cable with JCID receiver test board for iPhone X-13 Pro Max, solving the problems of no auto photosensitive and no true tone caused by damaged or missing original FPC flex.
4. JCID X-13PM receiver detection adaptor works with JCID V1SE/V1S Pro programmer and JC earpiece distance photosensitive sensor cable fixes iPhone Face ID true tone problem.
