Find Verified Floating Hose Suppliers, Manufacturers and Wholesalers

Self Floating Hose
Dredging Self-floating hoses are suitable for the harshest sea or mining conditions. Equipped with PE foam body, adjusted to the bouyance of the dredged material. It's available inner diameters up to 1200mm, various lengths and pressure ranges.

Features
1. Outer cover with excellent abrasion resistance and UV protection.

2. Inner layer with excellent abrasion resistance and high quality.

3. Single foam flotation casing to prevent water absorption.

4. Wearing colored indicator layer.

5. Area above water not less than 20% of total volume.

6. Bending angle: in working condition ,the bending angle is from 0�°to 45�°.

7. Low center of gravity, strong anti-wave ability, good stability.

8. Easy installation, good adhesion, long service life.

9.The product can be customized according to clients' requirements.

Self Floating Hose
Dredging Self-floating hoses are suitable for the harshest sea or mining conditions. Equipped with PE foam body, adjusted to the bouyance of the dredged material. It's available inner diameters up to 1200mm, various lengths and pressure ranges.

Description
A floating hose is a pliable conduit employed to transport liquids or gases between stationary locations in marine settings, including offshore oil rigs, tanker docks, or vessel-to-vessel transfers.



Features
1. Outer cover with excellent abrasion resistance and UV protection.

2. Inner layer with excellent abrasion resistance and high quality.

3. Single foam flotation casing to prevent water absorption.

4. Wearing colored indicator layer.

5. Area above water not less than 20% of total volume.

6. Bending angle: in working condition ,the bending angle is from 0�°to 45�°.

7. Low center of gravity, strong anti-wave ability, good stability.

8. Easy installation, good adhesion, long service life.

9.The product can be customized according to clients' requirements.

pay much attention to wear resistance, tensile strength, bending capacity and pressure rating for self-floating hoses.The self-floating hoses are fixed with flanges at both ends and the usual length is 11.5m.

Introduction of Self-floating Hose
Color: Black with orange rings around the hose.
Material: Rubber with thick PU foam, carbon steel flanges at both ends
Ranges: Inner diameter from 150mm to 800mm
Delivery: The floating hose inner diameter larger than 500mm always shipped by top open containers.

Floating oil and marine hoses are designed and produced in full accordance to OCIMF standards. These porducts are also subjected to manufacturing and testing requirements dictated by ISO9000:2001 quality standards.

Construction:

Tube:SBR, NR, BR.
Reinforcement:�Tire cord with helix wire and floating material layer.
Cover: SBR and CR blend.

Description:

Inner cover is excellent abrasion-resistance. It can protect the hose from the friction of depositional silt. And the colored indication layers can reflect the degree of the abrasion effectively. This can guarantees the normal use of the floating hose.

Application:

Floating high pressure rubber hose �is used with dredgers for silt/gravels conveyance. The suitable conveyance matters are usually mud, clay, fine sand, fine-mid sand and so on.

Characters:

1. Outer cover with excellent abrasion resistance and UV protection.

2. Inner cover with excellent abrasion resistance and high quality.

3. Wearing colored indicator layer.

4. Single foam flotation casing to prevent water absorption.

5. Can bear the high pressure of work.

6. The size of flange is at customers' request.

10. We can produce the hose up to ID1300mm, or as customers' requirement.
Specification:

Inside�Diameter Working�Pressure Burst�Pressure Vacuum�Pressure Adhesive
Strength Abrasion�Value Length
mm inch Mpa bar Mpa bar Kpa bar KN/m Cm3 ft m
254 10 1.5 15 4.5 45 80 0.8 4 4 38.7 11.8
304 12 1.5 15 4.5 45 80 0.8 4 4 38.7 11.8
350 14 1.5 15 4.5 45 80 0.8 4 4 38.7 11.8
400 16 1.5 15 4.5 45 80 0.8 4 4 38.7 11.8
450 18 1.5 15 4.5 45 80 0.8 4 4 38.7 11.8
500 20 1.5 15 4.5 45 80 0.8 4 4 38.7 11.8
550 22 1.5 15 4.5 45 80 0.8 4 4 38.7 11.8
600 24 2.0 20 6.0 60 80 0.8 4 4 38.7 11.8
800 32 2.0 20 6.0 60 80 0.8 4 4 38.7 11.8
850 34 2.0 20 6.0 60 80 0.8 4 4 38.7 11.8
900 36 2.0 20 6.0 60 80 0.8 4 4 38.7 11.8
1000 40 2.0 20 6.0 60 80 0.8 4 4 38.7 11.8
1200 48 2.0 20 6.0 60 80 0.8 4 4 38.7 11.8
1300 52 2.0 20 6.0 60 80 0.8 4 4 38.7 11.8

Mainline Floating Hose are oil hose that can adapt to the complex working conditions of the sea and the coast, and are used for ship-to-ship and ship-to-shore oil transfer loading and unloading.



Mainline Floating Hose (for offore Mooorings) Structure:

1) Inner steel wire: high-strength heavy-duty hot-dip galvanized steel wire
2) Inner inter layer: special high-strength polypropylene textile, polypropylene film
3) Outer steel wire: high-strength heavy-duty hot-dip galvanized steel wire

1. Marine flexible oil hose / marine floating oil hose is designed for off shore drilling and other demanding
applications where longer lengths and fewer connections are desired.
High quality hose design for superior pressure and higher working pressure in tough environments, cover
resistance to weather,salt water, sunlight and oil.
2. OS&D design to handle petroleum products up to 50% aromatics on marine docks , ships and barges. Can
meet the longest possible service conditions.
3. Good flexibility; low temperature, ozone and ethane resistance, and easy install.
4. Diameter from 2" to 25".


Plastic strip or film wrap, plywood protect flange.

Ultra clear float glass also called low iron float glass, is produced by less amount of iron in the molten glass formula(usually from 90-110ppm). This type is more transparent than regular glass and it doesn\'t have that greenish tint. The less iron content can increase the light transparency. ultra clear glass is the best choice for architects and designers when need color-matching.
Specification
Sizes: 914*1830/1220*1830/1830*2440/1650*2140/2140*3300/2140*3660/3300*4500/5100/6000mm

Thickness: 1.1-25mm

Quality standard

GB11614-2009/SGCC/EN 572

JHG float glass base is mainly located in North China, with the function to offer high qualified architecture, automotive, mirror, furniture, home appliance, solar, greenhouse field glass substrate. The exporting capacity is 200containers per month.

Specification

Sizes: 914*1830/1220*1830/1830*2440/1650*2140/2140*3300/2140*3660/3300*4500/5100/6000mm
Thickness: 1.1-25mm

Quality Standard

GB11614-2009/SGCC/EN 572

JHG tinted glass is produced by metal oxides to the float glass. The colour may be transferred in the series of blue, green, grey, bronze flexibly. The performance of visible light, privacy and solar heat transmission will be changed arrording the colour change. Different tinted glass offers varied application possibility-from interior partitions, to home appliance, to furniture, to facades and auto field. Reflective glass is float glass with a metallic coating that cuts off solar heat.The coating film may provide mirror effect, preventing visibility from outside and preserving privacy. JHG mainly offer 2 kinds of reflective glass. Hard reflective glass (on line) includes blue, green, grey, bronze, pink, silver colour, Soft reflective glass (off line) includes golden, silver, purple colur.
Specification

Sizes:1220*1830/1830*2440/1650*2140/2140*3300/2140*3660/2440*3660/2250*3660/3300*4500/5100/6000mm
Thickness: 3-12mm

Quality standard

GB11614-2009/SGCC/EN 572

JHG Ultra clear float glass is produced by less amount of iron in the molten glass formula.
This type is more transparent than regular glass and it doesn't have that greenish tint.
The less iron content can increase the light transparency.ultra clear glass is the best choice for architects and designers when need color-matching.
Thickness is from 2-25mm
Jumbo size 3660x18000mm

Different kinds of sheet/float glass from 1.1-25mm is in high quality ,which is suitable as material for window,door,curtain wall, mirror,home appliance ,furniture.
the colour includes :
clear float ,extra clear float glass
euro bronze,golden bronze float glass
euro grey ,dark grey float glass
ford blue ,dark blue float glass
F green ,dark green float glass
black float glass
all colour reflective glass

Product Grade: As per Client Requirement (MS/SS, etc)
Minimum and Maximum Price: As per Request
Price Units: USD
Incoterms: As per Mutual Understanding with Buyer
Product Origin: India
HS Code: Provided as per product
Minimum Order Size: NO MOQ (We can cater small quantities also)
Packaging Details: For Export Material (Export Quality Wooden Box)

Type: Hydraulic Hose Assembly

Material (Hose): Synthetic Rubber with Steel Wire Reinforcement

Hose Construction: 2-wire/4-wire braid (based on pressure rating)

End Fittings: Crimped Steel Fittings - Straight & 90�° Elbows

Hose Sizes (ID): �¼ to 1 (based on image estimate - can be confirmed with caliper)

Working Pressure: Typically ranges from 2500 PSI to 6000 PSI

Temperature Range: -40�°C to +100�°C (depending on fluid & hose compound)

Standards: SAE 100 R1AT / R2AT / R12 / EN 853/856 (based on rating)

Applications: Hydraulic machinery, industrial equipment, heavy-duty vehicles

Protective Finish: Zinc-plated / plated steel fittings

Brass Hose Barb Fittings are precision-engineered connectors used for secure, leak-resistant attachment of flexible hoses to fluid handling systems. Manufactured from high-quality brass, these fittings offer excellent corrosion resistance, durability, and reliable performance in both high and low-pressure applications.

Key Features:
Made from high-grade brass (conforming to IS, BS, or ASTM standards)
Barbed end ensures a tight grip on the hose for secure connection
Suitable for air, water, oil, gas, and chemical transfer
Corrosion-resistant and ideal for indoor/outdoor use
Compatible with rubber, PVC, or polyurethane hoses
Available in various sizes (1/8" to 1") and thread types (BSP, NPT, Metric)
Reusable and easy to install without special tools

Applications:
Industrial fluid transfer systems
Pneumatic and hydraulic systems
Automotive and fuel lines
Irrigation and garden hose setups
Plumbing, HVAC, and chemical processing

Available Types:
Straight Hose Barb
Elbow Hose Barb
Tee Hose Barb
Threaded Barb Adapters (Male/Female)
Bulkhead Hose Barb Fittings

Pipe fittings are the general names of parts and components that play the role of connection, control, direction change, diversion, sealing and support in the pipeline system. Steel fittings are pressure fittings. According to the different processing technology, it is divided into four categories, namely, butt welding pipe fittings (divided into weld and no weld), socket welding and threaded pipe fittings, flange pipe fittings.

According to the application:
1. pipe fittings for connecting pipes are: flanges, live joints, pipe hoops, clamps, clamps, throat hoops, etc.
2. changing the direction of the pipe: bends, bends.
3. pipe fittings changing pipe diameter: variable diameter (different diameter pipe), different diameter elbow, branch pipe table, reinforcing pipe.
4. pipe fittings with additional piping branches: three links, four links.
5. pipe fittings for pipe sealing: gasket, raw material belt, thread, flange blind plate, pipe plug, blind plate, head, welding plug.
6. pipe fittings for pipe fixing: clasp, hook, ring, bracket, bracket, pipe clamp, etc.

According to the connection :1, welded pipe fittings 2, threaded pipe fittings 3, clamping pipe fittings 4, clamping pipe fittings 5, socket pipe fittings 6, rubber ring connection pipe fittings
According to the material divided into 1, cast steel pipe fittings 2, forged steel pipe fittings 3, alloy pipe fittings 4, stainless steel pipe fittings.
Pipe fittings are widely used in municipal, petrochemical, west-to-east gas transmission, ships and nuclear power.

Characteristics: flexible; abrasion, aging, oil, weather, ozone resistance
Working temperature: -20 TO 120 ¡æ
Delivery cycle: As your order(2000 meters per day).
Type of shipping: Tianjin port or Qingdao port.
Safety factor: 1:3
Notes: Not bend over bending diameter ,not squeeze over, Avoid colliding flange surface.
Technical parameters:
Hose lining: NBR
Reinforcement layer: tire cord with helix wire
Cover rubber layer: CR and NBR blend


Packaging Details: plastic stripe in rolls or as the requirement(flexible radiator hose )
Delivery Detail: a 20ft container in 1 week

Application:Delivering industrial compressed air, has a wide range service in industry manufacture, mining , construction project and air tools.
Characteristics: flexible, aging-resistance, ozone resistance
Working temperature: -20 TO 80 ¡æ
Delivery cycle: As your order(2000 meters per day).
Type of shipping: Tianjin port or Qingdao port.
Safety factor: 1:3
Notes: Not bend over bending diameter ,not squeeze over, Avoid colliding flange surface.
Technical parameters:
Hose lining: SBR
Reinforcement layer: tire cord with helix wire
Cover rubber layer: SBR and CR blend

Packaging Details: plastic stripe in rolls or as the requirement(flexible radiator hose )
Delivery Detail: a 20ft container in 1 week

Specification:
- Material: Poly rattan, 304 inox.
- Design: heart, round, oval, ship, etc,...
- Color: white, brown, begie.
- Minimum order: 50 pcs.
- Size: 45cm, 60cm, 70cm, 80cm, 90cm.
- Delivery time: 10- 15 working days.
Payment & Delivery Terms:
- Payment: T/T (50% in advance, balance negotiable).
- Delivery: Fast and reliable shipping with this secure packaging.