lead edge feeder with no crush system.
flexo printer with servo motor registration.
sloitter with 8 axis wiht servo motor adjustment.
die cutter unit with servo drive and speed compensation. wiht Serrapid fast wooden die change system.
lead edge feeder with no crush system.
flexo printer with servo motor registration.
sloitter with 8 axis wiht servo motor adjustment.
die cutter unit with servo drive and speed compensation. wiht Serrapid fast wooden die change system.
Hydraulic mill roll stand Specification
Symmetrical structure can install two rolls of paper at the same time and continually change paper, paper roller clamp, lift-lower, loosen, movement, contraposition, translation etc.
Equipment was made of HT200-wide casting.
Maximum loading of one side arm 1500-2000kg
Each stand with two set track and trolley for carry paper.
Pneumatic braking
Electrical components are controlled centralized(domestic brank)
One set main motor power of hydraulic mill roll stand is 2kw, each arm power 1.5*4kw
YIKE GROUP Hydraulic mill roll stand Advantage
Shaftless mill roll stand
Two arms, feeding paper quickly
Pneumatic brake
Operated by motorize
Shaftless mill roll stand
1144 Flexo Printer Slotter Die Cutter Folder Gluer Suppliers
Short on time? Let Flexo Printer Slotter Die Cutter Folder Gluer sellers contact you.
1. ZJ-V5B hydraulic shaftless mill roll stand
Adopt hydraulic drive to complete the paper clamping, loosen, remove for the medium, translation left and right and others,the lifting of the paper adopts hydraulic drive.
Brake adjustable adopts multipoint braking system.
Every stand matched two sets paper car , and they can paper on the both sides at the same time.
2. Paper trolley, track
The whole track buried,The main frame of the 14th Channel steel with ¢ 20mm cold drawn welded round,length of track 6000mm.
Each paper holder matched two sets paper trolley, and paper on both sides at the same time.pull the roller paper to the right place.
3. RG-1-900 preheater
Preheat roller accord the pressure container national standards,and enclose the pressure container certificates and inspection certificate.
Each roller surface after grinding precision grinding and dealing with hard chrome plating, Surface friction is small, durable.
Electromotion adjustment angle, and angle can rotation adjustment the preheat area in the range of 360°.
2.Glue roller unit structure with the overall relocation,Maintenance can sway the machine at the overall maintenance,improve the working efficiency.
3.The humidity control apparatus equipped with a spray, so flute type to maintain good stability of deformation, avoid dry.
4.Automatic circulation system for glue, two-cylinder pneumatic gluing device, with good cushioning effect.
5.Active force variable frequency motor drive, energy efficient, low failure rate.
6.Amount of glue size with electric adjustment, touch screen display and operation of the encoder transmission coating gap, high accuracy.
5. DHC-150 Single corrugated the aspect Cutter(Spiral knife Crosscutting,NC thin knife slitting, down stacking )
Store 200 groups of orders, the man-machine interface, the screen displays information can be found at any time, modify, append, canceled.
Germany KEB servo motor drive controller, high-performance synchronous servo motor drive.
Cutting Machine adopts inlaid front steel blade structure, hardened gear grinding backlash-free transmission, high precision and long life.
Host wall of gray cast iron, rigidity, vibration resistance.
stacking adopt gantry platform lifting,Reach a certain number of right-angle transverse,Three sections of the paper,Some hair design paper roll straight bend output,Second overlapping fixed-length buffer,three part points Pneumatic separate ,Accelerated export cardboard.Improve working efficiency.The maximum length of stacked is 1.3 meters .This machine is suitable for efficient production color printing business.
For a single fast, for a single time 3-8 seconds.
Using thin tungsten alloy steel knife,blade sharp,the using life is more than 8000000 meters.
Electric mill roll stand is Symmetrical structure, can carry two craft paper at one time, which can work without brake.Reel paper lift-lower, clamp, loosen, movement, contraposition operated by hydraulic pressure.
1. 1- Electric mill roll stand 2-cast steel material 3-single point pnumatic break
2. Equiped with uniform torsion clutch, safe, easy and reliable operation.
3. The structure is symmetrical, can load two rolls raw paper at the same time, can change the paper roll without stop the machine.
1. Technical parameters:
leffective width:2500mm
loperation direction:left or right(Determined in accordance with the customer's facility)
ldesign speed:200m/min
ltemperature range:160200
lair source:0.40.9Mpa
lsteam pressure:0.81.3Mpa
lcorrugated flute:(UV type or UVV type)
2. Roller diameter parameters:
ldiameter of up corrugated roller: Ï?360mm
ldiameter of pressure roller:Ï?415m
ldiameter of glue roller:Ï?269mm
ldiameter doctor roller :Ï?153mm
ldiameter of preheater:Ï?400mm
3. Powered motor parameters:
lmain frequency drive motor:30KW;rated voltage:380V 50Hz;Continuous (S1) working standard
lsuction motor:15KW;rated voltage:380V 50Hz;Continuous (S1) working standard
lglue reducer linear actuator:30W;rated voltage:24V;short(S2) working standard
lglue gap motor:200W*2;rated voltage:380V 50Hz;short(S2) working standard
lglue pump motor:2.2KW;rated voltage:380V 50Hz;Continuous (S1) working standard
lglue frequency motor:3.7KW;rated voltage:380V;50Hz;Continuous (S1) working standard
Crosscutting machine is corrugated cardboard production line in the cutting of cardboard products mechanicalequipment, and its technical performance and equipment adjustment conditions directly affect the finishedcardboard cutting size is accurate, the pressure line is broken and the appearance of the cut is smooth and beautiful.
1.1-Heavy model single facer 2-gear box drive 3-Max speed 200m/min
2.It can store 200 units orders,replace the cutter specifications quickly and accurately,changing orders without stop,And enables networked computers to facilitate production management.
3.Germany Bryant servo motor drive controller, Taiwan Eview yield 10.4 inches color touch screen display,the project at a glance.
Main corrugated roller: 360mm according to the flute shape different pressure roller 415mm preheat roller  400mm.
Adopt negative pressure design, use less heat,make the core paper can be pressed evenly and attached to the surface of the corrugated roller, make the corrugator shape better.Because the pressure is evenly,the top of the corrugator can be glued more evenly,make the single corrugated paper bond better.
Corrugated roller use 48Crmo alloy steel, though heat treatment, surface through grinding make tungsten carbide treatment.
Corrugated roller and pressure roller use high stability gasbag control system, also have air pressure control buffering function.
Glue quantity control use electric adjust, glue isolation device electric, glue system can operate independently when main machine stop, to avoid glue use up.Glue tank is made of stainless steel.
Movable type glue system, wash easily, maintenance and repair is more easy.
Simple control system and touch screen system, with colorful pictures show the operate sate function choice faliure indication exclude and parameter setting all can act out the machine multi function, easy operation and humanization.
Preset device inside with spray system, adjust the core papers temperature and moisture.
Main,vice corrugated roller and pressure roller bearing all use high temperature grease, to make sure the bearing working life longer and running smoothly.
Adopt vacuum suction structure, with high-pressure strong blower.Suction with silencer.Gas supply and electrical control cabinet to focus on the same operation cabinet, not less than 1.5 meters away from the host Fully enclosed full operation side
Base and wallboard cast iron wall,Wallboard thickness130mm universal Joints.
Does corrugated roller material adopt 48CrMoalloy steel quenched. Laser hardening. Surface finish, main roll of corrugated diameter 280mm, surface hardness HRC60degree above.The key parts of the tile and pressure roller bearings Wafangdian produce high temperature bearings.
Pressure roller 284mm,surface grinding and chrome-plated cylinder control and remove up and down, 45 carbon steel materials, quenching (with cushioning devices).
Spindle 240mm, hyperbolic heavy rocker, expand chuck, multi-point brake, hydraulic drive lifting, panning left and right on the middle.
Hydraulic mill roll stand Specification
The symmetrical structure can install two rolls of paper at the same time and continually change paper, paper roller clamp, lift-lower, loosen, movement, contraposition, translation etc.
Equipment was made of HT200-wide casting.
Maximum loading of one side arm 1500-2000kg
Each stand with two set track and trolley for carry paper.
Pneumatic braking
Electrical components are controlled centralized(domestic brank)
One set main motor power of hydraulic mill roll stand is 2kw, each arm power 1.5*4kw
YIKE GROUP Hydraulic mill roll stand Advantage
Hydraulic mill roll stand characteristic
Professional manufacturer
Economic cost
Durable working
Fast delivery
Good after service
Structural features
1.Adopt hydraulic drive to complete the paper clamping, loosen, remove for the medium, translation left and right and othersï¼?the lifting of the paper adopts hydraulic drive.
High moisture absorption and release; Low noise and high speed
Woven structure, anti-skidding
Introduction
The corrugator belt also named the Corrugated board conveyor belt.
Corrugator belt is for corrugated board production line and developed specifically for Double Facer. Corrugator belts consistently keep the fastest absorption & release of moisture, which secures high-quality cardboards with less consumption of heat and energy, and higher speed is assured. Corrugator belt have been specially developed for the transport of board and optimization of the drying process,they resist the stress continuously and achieve as long a life as possible.
Type
Normal High-speed corrugator belt & High-speed corrugator belt with Kevlar edge
YK-K --- Reinforced Edges Kevlar armored on both edges
Main Technical Parameters And Requirements In Production Line
Electronic control system: fingerless single facer driving part NC thin blade slitter scorer double facer glue machine all adopt frequency motor delta frequency control system.operation interface easy and convenient Speed display control cabinet with each unit speed display, the unit call, emergency stop function.The main relays Schneider brand.
YV5B HYDRAULIC MILL ROLL STAND
technical parameters:
1. the range of clamping paper:MAX2200mm MIN1000mm
2.clamping diameters:MAX�¢1500mm MIN�¢350mm
3.main shaft diameter of paper holder:�¢240mm
4.gas source work pressure(Mpa):0.4---0.8Mpa
5.equipment size:Lmx4.3*Wmx1.8*Hmx1.6
6.single weight:MAX4000Kg
Hydraulic system parameters:
1.Work pressure(Mpa):16---18Mpa
2.lifting hydraulic cylinder:�¢100�?440mm
3.Clamping hydraulic cylinder:�¢63�?1300m
4.hydraulic station motor power:3KW --380V -- 50Hz
YK-1600SFL Single Facer Line is also called 2-layer corrugated paperboard production line. This Single facer Line is composed of Paper Roll stand, Single facer machine, paper cutting machine. To use the web paper material single face machine production line, producing and cutting single face corrugated paper as required sizes, it forms the corrugated board with no need drying. This unit has the advantages of reasonable fabric, advanced technology, high quality of production, high efficiency, low workmanship, operation and maintenance easy. This is the preferred equipment for the production of corrugated cardboard of the cardboard factories.
Specification:
Working Width
YK-1400SFL
1400mm
YK-1600SFL
1600mm
YK-1800SFL
1800mm
Heating method Electrical heating/Oil heating / Steam heating
Design speed 100-120m/min
Economical speed 80-100 m/min
Compress-air pressure 0.4-0.9MPa
Flute type Standard flute UV Flute
single facer line Standard spec. A,B,C,E,F
For other type and model, we can produce as customerâ??s requirement.
hydraulic shaftless mill roll stand
structural feature
Adopt hydraulic drive to complete the paper clamping, loosen, remove for the medium, translation left and right and othersï¼?the lifting of the paper adopts hydraulic drive.
High moisture absorption and release; Low noise and high speed
Woven structure, anti-skidding
Introduction
Corrugator belt also named Corrugated board conveyor belt.
Corrugator belt is for corrugated board production line and developed specifically for Double Facer. Corrugator belts consistently keep the fastest absorption & release of moisture, which secures high quality cardboards with less consumption of heat and energy, and higher speed is assured. Corrugator belt have been specially developed for the transport of board and optimization of the drying process ,they resist the stress continuously and achieve as long a life as possible.
Type
Normal High speed corrugator belt & High speed corrugator belt with Kevlar edge
YK-K --- Reinforced Edges Kevlar armored on both edges
Automatic corrugated cardboard production line, lead or chain flexo printer slotter die cutter machine, flute laminator, folder gluer, stitching machine, manual die cutter.
