solvent based fire retardant paint, based on special resins and Chemicals. The dried film gives good resistance against fire and Protection to base substrate.
RECOMMENDED USES
As fire retardant topcoat paint on wood, steel and concrete surface. At recommended thickness it has excellent fire retardant properties.
ADVANTAGES
One component special resin based paint, easy to apply, excellent water, weather and U.V. resistance. Dry film has excellent fire retardant properties
"Product name
Fire Extinguisher Cylinder
Type
0.5kg/0.8kg/1.2kg/1.3kg/1.35kg/Cutomized
Material
Steel
Usage
CO2 Fire Fighring
Keywords
Co2 Fire Extinguisher
Color
Customer Request
Working pressure
150bar"
SK 34 Fire bricks are special type of brick which are form of Refractory ceramic material. It is used for inner surface lining of Boiler, furnace, kiln, fireplaces & fireboxes.
Quality of Bricks:
We offer various quality bricks are 35 to 40% Alumina offering high temperature resistance.
Standard Sizes (MM):
230 x 115 x 75 MM
230 x 115 x 65 MM
SK 36 Fire bricks are special type of brick which are form of Refractory ceramic material. It is used for inner surface lining of Boiler, furnace, kiln, fireplaces & fireboxes.
Quality of Bricks:
We offer various quality bricks are 50 to 55% Alumina offering high temperature resistance.
Standard Sizes (MM):
230 x 115 x 75 MM
230 x 115 x 65 MM
Synthetic technology motor oil specially designed for modern high performance engine with gasoline direct injection (GDI and Turbo-GDI) systems. Developed by latest evolution technology platform EVOTEC fortified with SMART Molecules that improve engine cleanliness and prevent low-sped pre-ignition (LSPI). Outstanding low friction and heat resistance enhance acceleration response, wear prevention and maintaining engine power for better drivability in all situations.
APPLICATION
Designed for high performance gasoline engine both GDI and Turbo-GDI.
Recommended for passenger car, sport car and SUV equipped with start-stop system.
Suitable for all port fuel injection (PFI) gasoline engines running with unleaded gasoline (ULG) and ethanol blended gasoline (E10, E20 and E85).
KEY FEATURES
Enhance excellent engine cleanliness especially in piston and help reduce LSPI occurrence in Turbo-GDI engine by SMART Molecules.
Improve superb engine protection against wear and prevent timing chain elongation for maintaining maximum engine performance.
Outstanding low oil friction with high heat resistance by EVOTEC technology for superior acceleration responsiveness and reduced oil consumption.
Better oil degradation resistance and engine sludge prevention through oil drain intervals.
Product Properties for AdBlue as per the revised ISO22241 standard.
Urea 32,5 % (approximate) solution dissolved within deionised water. As required by SCR equipped vehicles under the provisions of Emissions standards Euro IV (Euro4), Euro V (Euro5) & Euro VI (Euro6).
Urea Content 31.8 33.2 % by weight
Density at 20C 1.0870 1.0930 g/cm
Refracting Index at 20C 1.3814 1.3843
Alkalinity as NH3 0.2 %
Biuret 0.3 %
Aldehyde 5 mg/kg
Insolubles 20 mg/kg
Phosphate (PO4) 0.5 mg/kg
Calcium 0.5 mg/kg
Iron 0.5 mg/kg
Copper 0.2 mg/kg
Zinc 0.2 mg/kg
Chromium 0.2 mg/kg
Nickel 0.2 mg/kg
Aluminium 0.5 mg/kg
Magnesium 0.5 mg/kg
Sodium 0.5 mg/kg
Potassium 0.5 mg/kg
