Top-Quality Plywood for Sale Multiple Types and Grades Available
Types of Plywood:
Softwood Plywood: Perfect for construction, subflooring, roofing, and wall sheathing.
Hardwood Plywood: Ideal for furniture, cabinetry, and interior fixtures.
Tropical Plywood: Best for marine construction and exterior furniture.
Flexible Plywood: Great for curved surfaces and architectural elements.
Marine Plywood: Built for boat building and outdoor structures.
Fire-Retardant Plywood: Essential for safety-critical applications in public buildings.
Grades Available:
A-Grade: Highest quality with a smooth surface and minimal defects, perfect for cabinetry and furniture.
B-Grade: Solid surface with few knots, suitable for furniture and shelving.
C-Grade: Includes minor imperfections, ideal for subflooring and projects where surface finish is less important.
D-Grade: More knots and defects, great for construction and underlayment.
Specifications:
Thicknesses: 6 mm, 9 mm, 12 mm, 15 mm, 18 mm, 25 mm
Sheet Sizes: Standard 2440 mm x 1220 mm (8 ft x 4 ft), with custom sizes available upon request
Glue Types: Moisture Resistant (MR) for indoor use, Weather and Boil Proof (WBP) for outdoor use
Face Veneer: Available in smooth or textured finishes, depending on grade and type
Applications:
Construction: Ideal for walls, roofs, and flooring.
Furniture: Perfect for creating tables, chairs, and cabinets.
Cabinetry: Suitable for kitchen units, wardrobes, and shelving.
Marine Use: Excellent for boat building, docks, and piers.
Decorative: Great for wall paneling, partitions, and ceiling panels.
Top-Quality Plywood for Sale Multiple Types and Grades Available
Types of Plywood:
Softwood Plywood: Perfect for construction, subflooring, roofing, and wall sheathing.
Hardwood Plywood: Ideal for furniture, cabinetry, and interior fixtures.
Tropical Plywood: Best for marine construction and exterior furniture.
Flexible Plywood: Great for curved surfaces and architectural elements.
Marine Plywood: Built for boat building and outdoor structures.
Fire-Retardant Plywood: Essential for safety-critical applications in public buildings.
Grades Available:
A-Grade: Highest quality with a smooth surface and minimal defects, perfect for cabinetry and furniture.
B-Grade: Solid surface with few knots, suitable for furniture and shelving.
C-Grade: Includes minor imperfections, ideal for subflooring and projects where surface finish is less important.
D-Grade: More knots and defects, great for construction and underlayment.
Specifications:
Thicknesses: 6 mm, 9 mm, 12 mm, 15 mm, 18 mm, 25 mm
Sheet Sizes: Standard 2440 mm x 1220 mm (8 ft x 4 ft), with custom sizes available upon request
Glue Types: Moisture Resistant (MR) for indoor use, Weather and Boil Proof (WBP) for outdoor use
Face Veneer: Available in smooth or textured finishes, depending on grade and type
Applications:
Construction: Ideal for walls, roofs, and flooring.
Furniture: Perfect for creating tables, chairs, and cabinets.
Cabinetry: Suitable for kitchen units, wardrobes, and shelving.
Marine Use: Excellent for boat building, docks, and piers.
Decorative: Great for wall paneling, partitions, and ceiling panels.
Top-Quality Plywood for Sale Multiple Types and Grades Available
Types of Plywood:
Softwood Plywood: Perfect for construction, subflooring, roofing, and wall sheathing.
Hardwood Plywood: Ideal for furniture, cabinetry, and interior fixtures.
Tropical Plywood: Best for marine construction and exterior furniture.
Flexible Plywood: Great for curved surfaces and architectural elements.
Marine Plywood: Built for boat building and outdoor structures.
Fire-Retardant Plywood: Essential for safety-critical applications in public buildings.
Grades Available:
A-Grade: Highest quality with a smooth surface and minimal defects, perfect for cabinetry and furniture.
B-Grade: Solid surface with few knots, suitable for furniture and shelving.
C-Grade: Includes minor imperfections, ideal for subflooring and projects where surface finish is less important.
D-Grade: More knots and defects, great for construction and underlayment.
Specifications:
Thicknesses: 6 mm, 9 mm, 12 mm, 15 mm, 18 mm, 25 mm
Sheet Sizes: Standard 2440 mm x 1220 mm (8 ft x 4 ft), with custom sizes available upon request
Glue Types: Moisture Resistant (MR) for indoor use, Weather and Boil Proof (WBP) for outdoor use
Face Veneer: Available in smooth or textured finishes, depending on grade and type
Applications:
Construction: Ideal for walls, roofs, and flooring.
Furniture: Perfect for creating tables, chairs, and cabinets.
Cabinetry: Suitable for kitchen units, wardrobes, and shelving.
Marine Use: Excellent for boat building, docks, and piers.
Decorative: Great for wall paneling, partitions, and ceiling panels.
Top-Quality Plywood for Sale Multiple Types and Grades Available
Types of Plywood:
Softwood Plywood: Perfect for construction, subflooring, roofing, and wall sheathing.
Hardwood Plywood: Ideal for furniture, cabinetry, and interior fixtures.
Tropical Plywood: Best for marine construction and exterior furniture.
Flexible Plywood: Great for curved surfaces and architectural elements.
Marine Plywood: Built for boat building and outdoor structures.
Fire-Retardant Plywood: Essential for safety-critical applications in public buildings.
Grades Available:
A-Grade: Highest quality with a smooth surface and minimal defects, perfect for cabinetry and furniture.
B-Grade: Solid surface with few knots, suitable for furniture and shelving.
C-Grade: Includes minor imperfections, ideal for subflooring and projects where surface finish is less important.
D-Grade: More knots and defects, great for construction and underlayment.
Specifications:
Thicknesses: 6 mm, 9 mm, 12 mm, 15 mm, 18 mm, 25 mm
Sheet Sizes: Standard 2440 mm x 1220 mm (8 ft x 4 ft), with custom sizes available upon request
Glue Types: Moisture Resistant (MR) for indoor use, Weather and Boil Proof (WBP) for outdoor use
Face Veneer: Available in smooth or textured finishes, depending on grade and type
Applications:
Construction: Ideal for walls, roofs, and flooring.
Furniture: Perfect for creating tables, chairs, and cabinets.
Cabinetry: Suitable for kitchen units, wardrobes, and shelving.
Marine Use: Excellent for boat building, docks, and piers.
Decorative: Great for wall paneling, partitions, and ceiling panels.
1597 Fire Resistant Cable To Iec 331 Bs 6387(Lpcb C) Suppliers
Short on time? Let Fire Resistant Cable To Iec 331 Bs 6387(Lpcb C) sellers contact you.
Fire clay is a range of refractory clays used in the manufacture of ceramics, especially fire brick,
PropertiesHigh-grade fire clays can withstand temperatures of 1,775 C (3,227 F), but to be referred to as a "fire clay" the material must withstand a minimum temperature of 1,515 C (2,759 F).[2] Fire clays range from flint clays to plastic fire clays, but there are semi-flint and semi-plastic fire clays as well. Fire clays consist of natural argillaceous materials, mostly Kaolinite group clays, along with fine-grained micas and quartz, and may also contain organic matter and sulphur compounds.
Fire clay is resistant to high temperatures, having fusion points higher than 1,600 C (2,910 F); therefore it is suitable for lining furnaces, as fire brick, and for manufacture of utensils used in the metalworking industries, such as crucibles, saggars, retorts and glassware. Because of its stability during firing in the kiln, it can be used to make complex items of pottery such as pipes and sanitary ware.
FRP cable trays at INDO are manufactured from Glass Armored Thermoset fireretardant
resins Available in different range applied for ideal locations where metallic systems get
easily corroded
INDO FRP Cable Tray system meet stringent Fire Retardant requirements It provides
advantages like Anti Corrosion High Strength No Earthing UV Resistant Good
Electrical Insulator Low thermal conductivity etc
Property Unit
Typical Value
Mass density g/cm 3 0.941-0.959
Melt flow Rate(190 centidegree /2.16kg) g/10min 1.0
Tensile yield strength MPa 19.0
Flexural modulus Mpa 965
Elongation@ break % 400
Impact Embrittlement temperature centidegree MAX -118
Dielectric Constant 100KHZ 2.32
1MHZ 2.31
Loss Tangent 100KHZ MAX 0.0001
1MHZ MAX 0.0001
Volume resistivity OHM-CM MIN 1x10 15
Application
Mainly used for the production of high toughness of the telephone,cable insulation material
LDPE:
Physical Properties Test Method Nominal Value Unit
Density ISO 1183 0.921 g/cm3
Melt Mass-Flow Rate (MFR) ISO 1133 1.9 g/10min
Hardness
Shore Hardness (shore D) ISO 868 45
Mechanical Properties
Tensile Modulus ISO 527-2 175 MPa
Tensile Strength Yield, ISO 527-2 9.0 MPa
Break, 13.0 MPa
Tensile Strain(Break) ISO 527-2 850 %
Modulus of Elasticity Internal Method 250 MPa
Thermal
Vicat Softening Temperature ISO 306/A50 89.0 �°C
Melting Temperature (DSC) DIN 53765 108 �°C
Peak Crystallization Temperature (DSC) DIN 53765 97.0 �°C
Heat of Fusion DIN 53765 110 J/g
Electrical
Volume Resistivity ASTM D257 8.5E+15 ohm â?¢cm
Dielectric Strength ASTM D149 30.0 kV/mm
Dielectric Constant (60Hz) ASTM D150 2.20 %
Dissipation Factor (60 Hz) ASTM D150 0.00050
LLDPE
Properties Test conditon Test method Test data Unit
Density 0.91
MFI 2
Drop impact strength ASTM D-1709 90 g
Elongation ,vertical/horizontal ASTM D-882 600/800 %
tensilestrength,thermal resistance ASTM D-1004 105/95 Kg/cm
elongation ASTM D-638 930 %
tensile strength ASTM D-638 180
tensile strength,vertical/horizontal ASTM D-882 380/350
Vicat softening point ASTM D-1525 103 C
melting point ASTM D-2117 126 C
Turbidity ASTM D-1009 12 %
45 glossness ASTM D-2457 75 %
Features : Soft flow,Wood flour filled Phenolic Moulding Powder with good surface & mechanical
and electrical properties,suitable for Injection Moulding & Transfer Moulding.
Colour : Black
Applications : Appliances
Properties Test Method Typical Value
Appearance - Black
Apparent Density ISO 60 0.65 g/cm3
Specific Gravity ISO 183 1.40
Tensile Strength ISO 527-1/2 52 MPa
Flexural Strength ISO 178 85 MPa
Compressive Strength ISO 604 200 MPa
Charpy Impact Strength(notched) ISO 179 1.80 KJ/m2
Deflection Temperature , 8 Mpa ISO 75 1300
C
Surface Resistivity IEC 60093 1.00E+10.5 Ohm
Volume Resistivity IEC 60093 1.00E+11.5Ohm.cm
Di Electric Strength IEC 60243 8.00 Kv/mm
Proof Tracking Index IEC 60112 130 V
Water Absorption ISO 62 55 mg
Shelf Life - 6 months
Property:It is soluble in most organic solvents, slightly soluble in ethylene glycol, insoluble in water.
Application:
DOA is the typical cold-resistant plasticizers with high plasticizing efficiency. Its color changes slightly when heated. It is suitable for PVC, EVC, polystyrene and synthetic rubber resins.
It can make downstream products soft even at low temperature, having good light-resistance and hand-feeling.
It is usually been used with the main plasticizer DOP and DBP for the production of cold-resistant agricultural thin film, frozen foods packaging film, coating layer of wire and cable, artificial leather, board, outdoor water pipe, etc.
In the application of plasticized paste, could make the paste's initial viscosity low and stable.
Cupola Fire Bricks are special type of brick which are form of Refractory ceramic material. It is used for inner surface lining of Boiler, furnace, kiln, fireplaces & fireboxes.
Quality:
We offer various quality bricks are IS-6, IS-8, PI - 30% to 70% Alumina offering high temperature resistance of 1100 C to 1700 C
Sizes of Cupola Bricks:
Length 9 Inch & 11 Inch
Dia (Inch) 9D, 12D, 15D, 18D, 21D, 24D, 27D up to 56D
Refractory Fire Tile are special type of brick which are form of Refractory ceramic material. It is used for surface lining of Boiler, furnace, kiln, fireplaces & fireboxes.
Quality:
We offer various quality bricks are IS-6, IS-8, PI - 30% to 70% Alumina offering high temperature resistance of 1100 C to 1700 C & Special brick as per require technical data considering to application of Brick.
Sizes (Inch):
24 x 12 x 6
24 x 12 x 3
24 x 18 x 6
24 x 18 x 3
Fire clay & High Alumina bricks are special type of brick which are form of Refractory ceramic material. It is used for inner surface lining of Boiler, furnace, kiln, fireplaces & fireboxes.
Quality of Bricks:
We offer various quality bricks are IS-6, IS-8, PI - 30% to 90% Alumina offering high temperature resistance of 1100 C to 1700 C.
These cables are used for the fire alarm systems, power supply control of the equipment that must function during fire, emergency lighting, the equipment for evacuation and follow up and warning systems in intelligent or semi – intelligent buildings where intense human population or valuable goods are found such as: hospitals, cinemas, theatres, schools, shopping centers, airports, factories, etc. Firekab products have a low smoke density, are halogen free and they don’t emit poisonous gases. We can produce firekab cables with bs 6387 c w z, en 50200, iec 60331, etc. We have 2 lpcb certified firekab products.
2507 stainless steel coil is used in oil and natural gas industry; Offshore stone skyshatter oil platform (heat exchanger pipe, water treatment and water supply system, fire protection system, water spraying system, water stabilization system; petrochemical equipment; desalination (desalination) equipment (and high-pressure pipe and seawater pipe in the equipment). Mechanical and structural components that require both high strength and high corrosion resistance: fuel (waste) gas purification equipment.
Name
2507 Stainless Steel Coil
Standard
JIS, AISI, ASTM, GB, DIN, EN, BS
Material
2507
Surface Treatment
BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirementg,etc.
Width
100mm-2500mm or as required
Thickness
0.1mm-12mm or as required
Length
As customer's request
Inspection
Fully accept all the third party to test before shipment.
Packing
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required.
Payment Terms
L/C, T/T ETC.
Stainless steel coils are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery
Warehouse Storage
Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
* I-beam, also known as steel beam (English name universal Beam), is a long steel with the section of the I-shaped. I-section steel is divided into hot rolIed I-beam and lightweight I-beam
The characteristics of galvanized I steel:
1. Strong corrosion resistance: the thickness of hot-dip galvanized layer can reach more than 300 m;
2. Good plasticity and toughness: no deformation in cold bending;
3. High strength: it can be used as the load-bearing framework of ceiling enclosure plate.
4. Good fire resistance: high melting point (1000 C), strong fire resistance;
5. Long service life : 100 years.
6. Flexible and fast installation: short construction period.
7. The color is bright and durable, without surface decoration
Standard DIN GB JIS BA AISI ASTM EN GOST etc.
Shape : I -Beam
Materials : Galvanized steel
Size : As customer request
Packing : By bundles with steel strips or as customer request
Application : Mechanical&manufacture,Steel
structure,Shipbuilding,Bridging,Automobile chassis, etc.
Warehouse Storage
* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Packing and shipping
* Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
* During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period
Color coated corrugated sheet, also known as pressure plate, the use of color coated steel plate, galvanized plate and other metal plate by rolling cold bending into a variety of wave type pressure plate, it is suitable for industrial and civil buildings, warehouses, special buildings, large-span steel structure of the roof, wall and interior and exterior wall decoration. With light weight, high strength, rich color, convenient construction, seismic, fire, rain, long life, maintenance-free and other characteristics, has been widely used.
Product Name
Corrugated Galvanized Prepainted Roofing Sheet
Material
SGCC, DX51D, DX53D, DX54D, SPHC, Q195 and etc.
Thickness
0.12mm-0.8mm or customized
Width
600mm-1500mm or customized
Zinc Coating
30-500 g/
Color Choice
Natural color, blue, green, yellow, red, grey, black, white and others
Standard
ASTM, BS, GB, JIS and etc.
Surface
Finished or unfinished is avaliable, coat or without coat
Application
Widely used in construction, home, appliance, decoration, wear resistant steel and etc.
Warehouse Storage
Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Color coated corrugated sheet, also known as pressure plate, the use of color coated steel plate, galvanized plate and other metal plate by rolling cold bending into a variety of wave type pressure plate, it is suitable for industrial and civil buildings, warehouses, special buildings, large-span steel structure of the roof, wall and interior and exterior wall decoration. With light weight, high strength, rich color, convenient construction, seismic, fire, rain, long life, maintenance-free and other characteristics, has been widely used.
Product Name
Corrugated Galvanized Prepainted Roofing Sheet
Material
SGCC, DX51D, DX53D, DX54D, SPHC, Q195 and etc.
Thickness
0.12mm-0.8mm or customized
Width
600mm-1500mm or customized
Zinc Coating
30-500 g/
Color Choice
Natural color, blue, green, yellow, red, grey, black, white and others
Standard
ASTM, BS, GB, JIS and etc.
Surface
Finished or unfinished is avaliable, coat or without coat
Application
Widely used in construction, home, appliance, decoration, wear resistant steel and etc.
Warehouse Storage
Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
1597 Fire Resistant Cable To Iec 331 Bs 6387(Lpcb C) Suppliers
Short on time? Let Fire Resistant Cable To Iec 331 Bs 6387(Lpcb C) sellers contact you.
