Everflon FEP Aqueous Dispersion
Everflon FEP D50 is an off-white aqueous fluorinated ethylene propylene (FEP) dispersion stabilized with a non-ionic surfactant.
It is a general-purpose dispersion that can be used to impart some the unique properties of FEP to end products that would be difficult to make using traditional melt extrusion processes. It can be used to coat or impregnate porous structures, or to make thin films. It can be coated and melt bonded to polytetrafluoroethylene (PTFE) resin or used as a hot melt adhesive.
The FEP resin in Everflon FEP D50 is a melt flowable thermoplastic, providing superior properties typical of fluoroplastic resins: retention of properties after service at 204 °C (400 °F) and useful properties at 240 °C (400 °F).
Everflon FEP D50 aqueous dispersion provides:
Inertness to nearly all industrial chemicals and solvents
Stability at high temperatures
Excellent dielectric properties
Excellent weatherability
Application
Heat-sealable top coatings for PTFE-coated fabrics for belting, circuit boards, architectural fabrics, and electrical insulation
Cast film for capacitor dielectrics or chemical barriers
Hot melt adhesive for PTFE, PFA, and FEP parts
Metal coatings
Processing
Conventional dip or flow techniques can be used for coating or impregnating high temperature fabrics, fibers, and other products with Everflon FEP D50.
A FEP resin coating on woven fabrics made of fiberglass, fiber, or other high-temperature resistant fibers, can be made by dip coating. Successive passes may be necessary to build the desired thickness to produce a smooth, crack-free coating. Each coating layer is usually dried to remove water (typically at 120 °C [250°F]), baked to remove the wetting agent (typically at 270 °C [518 °F]), and then heated above the crystalline melting point of the resin particles (approximately 265 °C [509 °F]). If the Everflon FEP D50 is being used as a top coat over a PTFE-coated fabric or other parts, the coating must be heated to melt the PTFE (approximately 337 °C [639 °F]) to maximize adhesion. Other solid or liquid ingredients can be added to Everflon FEP D50 to provide specific processing or finished product behavior
Company Introduction:
Shandong Xinhongyun New Material Technology Co., Ltd.Located in weifang city, shandong provience., is a ISO certified professional & reliable manufacture of electrical insulation materials-BOPI FILM(polyimide film). our annual prodcution capacity is 150-200MT.main thickness 12.5um,25um & 50um, main width 514mm,520mm,1028mm&1040mm.main color: yellow, red, matte black.
we have strict quality inspection system ,we trust we can supply you best quality product with high quality
Description
Polyimide (PI) is a polymer of imide monomers, aslo know as heat resistant film or high temperature film. With their high heat-resistance, polyimide enjoys diverse applications in roles demanding rugged organic materials.� Polyimide film� is ideal for insulating circuit boards, high temperature powder coating and transformers manufacturing.
Polyimide film provides excellent electrical, thermal, physical and chemical properties over a wide temperature range between -269ºC (-452F) and 40ºC (752F) making them superior for electrical insulation applications Polyimide film can be laminated, metalized, punched, formed or adhesive coated. BOPI film has better thickness tolerancem,highter physical, chemical,and electrical properties. It� is the recommended choice for applications that require an all-polyimide film with an excellent balance of properties over a wide range of� temperatures.
we can provide both standard and custom polyimide film solutions for a customer depending on their needs.
Slitting and Packging
Width:520mm~1040mm
Core ID:76mm(3'')or 152mm(6''),Core materials:Paper or plastic
Packaging:PE film packaged,with aluminum foil and foam,Suspended packing.
Storage:The film should be stored in a dry and clean indoor,should be suspended in the box. Should not erect,close to the fire,heat or direct sunlight.
Applications
Wire&cable Insulation, slot liner insulation,interlayer insulation in Motor,transformer etc.
Backing material for Polyimide coating or composites
Flexible Printed Circuits Board(F-PCB)
Polyimide Label
Polyimide tubing
Polyimide film is synthesized by polymerizing pmda and oda in strong polar solvents through the process of forming film and imine treatment at high temperature, which possesses excellent physical, chemical, and electrical properties, atomic radiation resistant, solvent resistant, low & high temperature resistant, it performs successfully in the wide range of temperature as low as -452f(-269c) and as high as +752f(+400c).
Polyimide film coated fep resin is uesd for magnet wire in oil pump which is similar to fn019 and fn919. Any further information , please kindly contact us.
The company is led by a team of entrepreneurs, who have a rich experience in the industry. They keep a tab on the latest trends in the industry whilst employing the latest practices in terms of technology and management.
MATERIAL: PC natural 100% pure pc without any coating
CATEGORY: PC
TYPE: Natural
SPECIFICATION: Separate 25 kg bag and Mark per month 78 mt 100% pure pc without any coating ,post Industrial materials
Origin: Bangladesh
LOADING WEIGHT: 24 Ton
FOB (USD/Ton): 1450$ - 1700$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
Our Commitment
We are committed to delivering in accordance with the quality given, source and licensed in the field of scrap transportation.
2Lians always for the purpose of satisfying customers on the criteria of sustainability and fairness through high work efficiency
Ritver Powder Coating is a Italian product manufactured in Dubai UAE for Africa and Asia markets. Powder coating is categorized in:
Class 1,2 and 3 (for metal intrusions- aluminium, cast iron and steel)
Class 1 POLYESTER : Standard Powder Coating with upto 150 color codes as per RAL systems with a warranty of up to 20 years
Class 2 EPOXY: Super Durable (for exterior and interior) for up to 45 RAL color shades
Class 3 EPOXY-POLYESTER:Hyper Durable (for high end structures to protect from UV), Recommended for high rise structures, aviation and metro- locomotive industries
Available in Full Gloss: 90/Gloss: 77/Semi Gloss: 35/Matt: 25/Dead Matt:15% in soft textured, standard texture and coarse finishes
Product is available in 20kg packing
Item: PE Coated Paper Cup Stock, Raw Material Roll, Paper Cup Bottom Roll, Paper Cup Paper
Material: 100 % virgin wood pulp
PE coating: Single PE or Double PE
Printing: Flexo-graphic Printing, Offset Printing or without
Color: Black, Red, White, Yellow or customized as artwork.
Application Area: Family, Office, Party, Meeting, Restaurant, Entertainment, Advertisement, etc.
Feature: Disposable, Eco Friendly, Biodegradable, waterproof, economic.
Purpose: Disposable Paper Cup, for coffee, milk, tea, water, ice cream, fruit juice, etc.
Place of Origin: Thailand
PP8000SH
POLYESTER PUTTY - HEAVY
A combination of a special unsaturated polyester resin with a selected quick setting for subsequent coats for the complete Ritver paints system.
PP8004
POLYESTER PUTTY - LIGHT
A lightweight two-component Polyester based putty, formulated to exhibit very good adhesion and high elasticity.
This product is suitable for large surface areas; is easy to apply and provides excellent sandability.
ARP329
Body Guard Undercoating is a premium undercoating material with corrosion protection, excellent spray pattern, coverage and adhesion; protects underbody parts from rust and stone chipping.
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Two component, acrylic aliphatic polyurethane coating. Offers excellent gloss and colour retention. It is used for subtracts as steel, aluminum, glass-fiber, plywood etc.
Product Name: PE coated paper roll;
Base Paper Weight: 50~350gsm;
PE Weight: 15~25gsm;
PE coating Type: single side or double side;
Width: 600~1200mm;
Roll Dia: 1100~1200mm;
Core Dia: 3 inch or 6 inch;
MOQ 15 Tons
FOB price: TBD
Term of Price: FOB Shenzhen port or CIF destination port
Port of Loading: Shenzhen port
Delivery Time: ~30 days
Bathrobe, t shirt, women's garment, ladies dress, polo shirt, baby wear, home wear, underwear, lingerie, sleep wear, sports wear, padded wear, down jackets, hoodie, casual wear, pants, shorts, towel, blankets, etc.,
being a clothing supplier especially for ladies wear, we manufacture since 2006 with good reputation
focus on manufacturing ladies wear more than 17 years
*aggresive price
*short shipping and delivery time and completely inspection before shipment
*both knit and woven
*skilled support team
*oem/odm
*2 own factories in china, more than 20 cooperated factories in china.
Polyester powder coating is a thermosetting powder coating based on saturated Carboxylated polyester resins especially selected for architectural use It has good flow and excellent resistance to atmospheric ageing environment. This powder coating product is applicable for electrostatic application.
64793 Fep Coating Suppliers
Short on time? Let Fep Coating sellers contact you.
