Ethicon Prolene is a brand of surgical suture material, and the notation "2/0" refers to the size or diameter of the suture. The cutting needle indicates the type of needle attached to the suture. A cutting needle is designed with a sharp edge, allowing it to cut through tissues, and it is often used for skin closure and in procedures where a clean, precise incision is needed.
So, "Ethicon Prolene 2/0 cutting needle" signifies a Prolene suture with a size of 2/0 and a cutting needle.
Here's a breakdown:
Ethicon Prolene: Ethicon is a subsidiary of Johnson & Johnson and is known for producing a variety of surgical products, including sutures. Prolene is a type of suture material made of polypropylene.
2/0 (pronounced "two-oh"): This indicates the size or diameter of the suture. In this case, 2/0 is a medium-sized suture commonly used for various surgical procedures.
Cutting Needle: A cutting needle is designed for sharp and precise penetration through tissues. It's commonly used in procedures where a clean incision is required, such as in skin closure.
The Ethicon 8702H is a specific type of suture produced by Ethicon, a subsidiary of Johnson & Johnson and a leading manufacturer of surgical sutures and other medical devices. The product you mentioned, "7-0 Prolene Suture," refers to a specific size and type of suture.
Here are some key details about the Ethicon 8702H 7-0 Prolene Suture:
Suture Material: Prolene is the brand name for a synthetic, non-absorbable monofilament suture material made of polypropylene. Monofilament sutures like Prolene are smooth and reduce tissue drag, making them suitable for various surgical applications.
Size: The "7-0" designation indicates the size of the suture. In this case, it is a very fine suture. Suture sizes are denoted numerically, with smaller numbers indicating larger sizes.
Color: The "blue" in "blue monofilament" indicates the color of the suture. Suture colors are used to enhance visibility during surgery.
Non-Absorbable: Prolene sutures are non-absorbable, meaning they do not break down or dissolve over time. This characteristic makes them suitable for applications where long-term tissue support is required.
Indications: Prolene sutures are commonly used in various surgical procedures, including cardiovascular, ophthalmic, and plastic surgery. The choice of suture material and size depends on the specific requirements of the surgical procedure.
Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite, manganese, clinker and iron ores etc), scraps of above items including hms 1&2 and steel scraps.
We offer a wide plethora of Zinc in many forms including LME registered
and non registered Special High Grade Ingots and Jumbos, cathodes,
dust, foil, granules, powder, pieces, anodize activated powder, shot,
and a mossy form.
Zinc is a bluish-white, lustrous metal. It is brittle at ambient temperatures but is
malleable at 100 to 150°C. It is a reasonable conductor of electricity, and burns in air
at high red heat with evolution of white clouds of the oxide. Plating thin layers of zinc
on to iron or steel is known as galvanizing and helps to protect the iron from corrosion.
We are able to supply Tin in many forms including LME registered and
non registered, ingots, slabs, bars, foil, granules, powder, anodized
activated powder, shot, wire, sticks, ingots, and “mossy tin”.
Tin is a silvery-white metal, is malleable, somewhat ductile, and has a highly crystalline
structure. The element has two colours, with a cubic structure which changes at
allotropic forms. On warming it is grey, the ordinary form of the metal. When Tin is
cooled below 13.2°C, it changes slowly from white to grey or tetragonal structure. This
change is affected by impurities such as Aluminium and Zinc, and can be prevented
by small additions of Antimony or Bismuth.
We put forward a high quality of assortment of Nickel which is available
in many forms including LME registered and non registered cathodes,
cut cathodes, briquettes, pellets, disks, shots, granules, foil, powder,
flakes, sheet, wire, mesh, spheres, “evaporation slugs”, and rods.
Nickel is a silvery white metal that takes on a high polish. It is hard, malleable, ductile,
somewhat ferromagnetic, and a fair conductor of heat and electricity
We are engaged in making Lead available in several forms including
LME registered and non registered 99.97% and 99.99% as well as
secondary ingots, foil, granules, powder, rod, shot, sheet, and wire.
Lead is a bluish-white lustrous metal. It is very soft, highly malleable, ductile, and a
relatively poor conductor of electricity. It is very resistant to corrosion but tarnishes
upon exposure to air. Alloys include pewter and solder.
We hold immense expertise in making available Copper in many forms
including LME registered and non registered cathodes, billets, rods,
cakes, bars, foil, sheet, granules, plates, powder, shot, turnings, wire,
insulated wire, mesh and “evaporation slugs”.
Copper is one of the most important metals. Copper is reddish with a bright metallic
lustre. It is malleable, ductile, and a good conductor of heat and electricity (second
only to silver in electrical conductivity). Its alloys, brass and bronze, are very important.
Monel and gun metals also contain copper. The most important compounds are the
oxide and the sulphate, (blue vitriol
We source high quality Ores and Others that are majorly used in numerous of Industries for diverse uses. The wide collection of Mineral Ores is free from impurities and rich in other essential features. Our esteemed client’s can avail the wide gamut of Mineral Ores at very pocket friendly price.
We deal in
* Bauxite ore
* Copper ore
* Lead ore
* Nickel ore
* NPI -Nickel pig iron
* Tin ore
* Zinc ore etc
We offer a wide plethora of bluish-white lustrous metal Zinc. It is brittle at ambient temperatures but is malleable at 100 to 150C. Being a good conductor of electricity it has a wide usage in numerous applications. We offer this high quality Zinc to our clients at very economical price.
Properties
Melting point : 419.5C
Boiling point : 911C
Resistivity : 5.96 micro ohm-cm at 20 C
Standard state : solid at 298 K
Color : bluish pale grey
Classification : Metallic
We are engaged in offering Special High Grade Ingots and Jumbos of about 1 M. Ton size. LME registered / Non-registered / Special High Grade Ingots and Jumbos as well as High Grade and Zamak 3 etc are offered by us.
Code 86310: Cannula fixation and injection plaster. Non-woven adhesive dressing with absorbent pad
Features
1. Sterile and adhesive as required for firmly securing cannulas used for hypodermic injections.
2. Laid on a non-woven hypoallergenic backing to be fitted with a central pad which facilitates the introduction of the hypodermic needle.
3. Waterproof but air permeable-shielding out water, dirt and germs.
Rosemary (Rosmarinus officinalis) is a woody, perennial herb with fragrant evergreen needle-like leaves. It is native to the Mediterranean region. It is a member of the mint family Lamiaceae, which also includes many other herbs.
The name rosemary derives from the Latin name rosmarinus, which is from "dew" (ros) and "sea" (marinus), or "dew of the sea" — apparently because it is frequently found growing near the sea.
Description
Forms range from upright to trailing; the upright forms can reach 1.5 m (5 ft) tall, rarely 2 m (6 ft 7 in).
The leaves are evergreen, 2/4 cm (0.8/1.6 in) long and 2/5 mm broad, green above, and white below with dense short woolly hair.
Flowering, very common in a mature and healthy specimen, blooms in summer in the north; but can be everblooming in warm-winter climates and is variable in color, being white, pink, purple, or blue.
The rosemary plant is light blue and blooms from March to May. For most tonics and recipes the rosemary leaves are use more often than the flowers or the rest of the plant. Rosemary is a bushy type of evergreen that can grow six feet or higher. The tree contains leaves that are stiff and leathery.
Turmeric is one of nature's most powerful healers. The active ingredient in turmeric is curcumin. Tumeric has been used for over 2500 years in India, where it was most likely first used as a dye.
The medicinal properties of this spice have been slowly revealing themselves over the centuries. Long known for its anti-inflammatory properties, recent research has revealed that turmeric is a natural wonder, proving beneficial in the treatment of many different health conditions from cancer to Alzheimer's disease.
Here are 20 reasons to add turmeric to your diet:
1. It is a natural antiseptic and antibacterial agent, useful in disinfecting cuts and burns.
2. When combined with cauliflower, it has shown to prevent prostate cancer and stop the growth of existing prostate cancer.
3. Prevented breast cancer from spreading to the lungs in mice.
4. May prevent melanoma and cause existing melanoma cells to commit suicide.
5. Reduces the risk of childhood leukemia.
6. Is a natural liver detoxifier.
7. May prevent and slow the progression of Alzheimer's disease by removing amyloyd plaque buildup in the brain.
8. May prevent metastases from occurring in many different forms of cancer.
9. It is a potent natural anti-inflammatory that works as well as many anti-inflammatory drugs but without the side effects.
10. Has shown promise in slowing the progression of multiple sclerosis in mice.
11. Is a natural painkiller and cox-2 inhibitor.
12. May aid in fat metabolism and help in weight management.
13. Has long been used in Chinese medicine as a treatment for depression.
14. Because of its anti-inflammatory properties, it is a natural treatment for arthritis and rheumatoid arthritis.
15. Boosts the effects of chemo drug paclitaxel and reduces its side effects.
16. Promising studies are underway on the effects of turmeric on pancreatic cancer.
17. Studies are ongoing in the positive effects of turmeric on multiple myeloma.
18. Has been shown to stop the growth of new blood vessels in tumors.
19. Speeds up wound healing and assists in remodeling of damaged skin.
20. May help in the treatment of psoriasis and other inflammatory skin conditions.
Type 2 hot eye onion root cutting peeling machine,process : elevating onion ---onion root cutting --- elevating onion ---peeling .onion root cutting speed 50-60pcs/min ,according onion diameter different ; onion peeling capacity 100-2000kg/hour can customized .
For different varieties of onions,simple operation,save power save time save labor cost ,stable working .
Welcome cooperate!
Prperties: The prduct is a white needle crystal r pwder. SP. GR. 2.8823.13g/ cm3, sublimatin temp. 1272Celsiur scale.Its slightly sluble in water and greatly sluble in HF liquid. The chemical prperty fr the high density aluminum fluride is very steady, but that cntains certain crystal water will be decmpsed int Al23 at high temperature with HF being released.
Specificatin:
grade chemical cmpsitin % Physical character
F Al N2 Fe2342- P25 LI Bulk dity g/cm3
AF-0 61.0 31.5 0.30 0.10 0.06 0.10 0.03 0.5 1.5
AF-1 60.0 31.0 0.40 0.30 0.10 0.6 0.04 1.0 1.3
AF-2 58.0 29.0 2.8 0.30 0.12 1.0 0.04 5.5 0.7
AF-3 58.0 29.0 2.8 0.35 0.12 1.0 0.04 5.5 0.7
Uses: Its mainly used as an adjusting agent fr electrlyte in aluminum smelting by fused salt electrlysis, als in ceramic glaze, catalyst and flux f nnferrus metal metallurgy etc.
Brief Intrductin f the Prductin Technics
In the Hydrgen Fluride Reacting Furnace which is heated utside, Vitril reacts with Flurite t create the Hydrgen Fluride Gas and Anhydrus Fluride Plaster by heating in the prcess f prducing Aluminum Fluride, then the Hydrgen Fluride Gas react with dry Aluminium Hydrxide in Fluidized Bed t create t Aluminum Fluride and water.
Packaging
packed in wven PP bags with plastic film inside. Each bag has net weight f 25kgs, 50kgs, 500kgs and 1000kgs.
Shape:flake, powder, 2-4cm lump and 2-5mm/3-8mm granular
Properties:There are two types,anhydrous aluminium sulphate and aluminium sulphate octadecahydrate. In normal condition , it is AL2(SO4)3 18H2O; AL2(SO4)3 14H2O after efflorescence, can be white powder , glittering flaky or crystalline flakes, odorless, sweet to slight bitter.
Use:Sewage Treatment, treatment of drinking water, Sizing of paper , Cement Additive.
Specifications
Item Name Standard
AL2O3 15.6% 16.5% 17%
Fe2O3 ¤0.5 % 0.005 % 0.004%
PH value .0 3.0 3.0
Water insoluble matter 0.2% 0.04% 0.03%
Packing 25kg or 50kg or 1000kg in plastic lined woven bag
Usage and Dosage:
1. Industrially: ferrous sulphate heptahydrate is mainly used as a precursor to other iron compounds. It is a reducing agent, for the reduction of chromate in cement.
2. Nutritional Supplement: Together with other iron compounds, ferrous sulphate is used to fortify foods and treat iron-deficiency anemia. Constipation is a frequent and uncomfortable side effect associated with the administration of oral supplements. Stool softeners often are prescribed to prevent constipation.
3. Colorant: Ferrous sulphate can also be used to stain concete and some limestones and sandstones a yellowish rust color.
4. Water Treatment: Ferrous sulphate has been applied for the purification of water by flocculation and for phosphate removal in municipal and industrial sewage treatment plants to prevent eutrophication of surface water bodies.
Storage:
Storage Store in cool, dry, well ventilated area, removed from oxidising agents (eg. hypochlorites), acids, metals and foodstuffs. Ensure containers are adequately labelled, protected from physical damage and sealed when not in use. Large storage areas should have appropriate ventilation systems.
Precaution: Flammability Non flammable. No fire or explosion hazard exists.
Packing: Net weight 25kgs, 50kgs per each plastic woven bag
Technical Specification
Appearance: Light green crystalline powder
Fe 19.7%min
Pb 20 ppm max
As2 ppm max
Cd 5 ppm max
Size Crystalline Powder
