Scope
Engine coolant boiling point tester is to measure the engine coolant boiling point equilibrium for dilute or concentrated engine coolant. Take 60ml sample into 100ml beaker, heated to boiling under normal pressure, when it reaches the gas-liquid equilibrium, read the temperature of the sample, the atmospheric pressure is calibrated to the boiling point of the sample.
Features
1, engine coolant boiling point tester with integrated design, easy operation and maintenance
2, engine coolant boiling point tester with PID temperature control system, high precision, stable
3, engine coolant boiling point tester uses electric heating units, no fire, safety and environmental protection
4, engine coolant boiling point tester double bomb result, easy to operate parallel experiments
Technical Parameters
1, it applies to the determination of the engine coolant boiling point balance
2, the flask: 100mL
3, a reflux condenser: 200mm long
4, the preparation of glass fiber heating mantle, good insulation properties, no open flame heating, heat evenly
5, solid state voltage controlled heating rate, economic security
6, the instrument Material: brushed stainless steel
7, power supply: AC220V 50HZ
We offer a wide plethora of bluish-white lustrous metal Zinc. It is brittle at ambient temperatures but is malleable at 100 to 150C. Being a good conductor of electricity it has a wide usage in numerous applications. We offer this high quality Zinc to our clients at very economical price.
Properties
Melting point : 419.5C
Boiling point : 911C
Resistivity : 5.96 micro ohm-cm at 20 C
Standard state : solid at 298 K
Color : bluish pale grey
Classification : Metallic
We are engaged in offering Special High Grade Ingots and Jumbos of about 1 M. Ton size. LME registered / Non-registered / Special High Grade Ingots and Jumbos as well as High Grade and Zamak 3 etc are offered by us.
Chemical Properties
Boiling point 40 C
density 0.967 g/mL at 25 C(lit.)
vapor pressure 23 hPa (195 C)
refractive index 1.439
Fp 82 F
storage temp. Flammables area
solubility Miscible with alcohol, isopropyl alcohol and toluene.
form Oily Liquid
Specific Gravity 0.9671
color Light yellow
Item Specifications
Appearance Colorless transparent or light yellow liquid
Purity % 99.99
Aluminum content % 10.2-12.5
Density ( g/cm3) 0.92-0.97
Specifications:
index value
appearance white crystalline powder or flakes
Assay 99.0%
residue on ignition 0.01%
Boiling point 135 c at 1,013 hpa
Moisture 0.25%
Uses:
It is used as raw material for medicine, pesticides, dyes and organosilane coupling agents. It is also useful in the determination of nickel and cobalt. Acetone oxime is an excellent corrosion inhibitor (deoxidant) with lower toxicity and greater stability compared to hydrazine.
Package:
25kg carton drum or 1kg foil bag or by request of clients
Product Feature
Odor: Slight irritative.
Specific Gravity: Unavailable
Solubility: Soluble in water.
Density: 2.19
pH: 6-7
pH Test-Method: PH test paper.
% Volatiles by volume @ 21C (70F): 0
Boiling Point: Not applicable.
Melting Point: >300 C Decomposes.
Vapor Pressure (mm Hg): No information found.
Bulk Density: ~0.9
Evaporation Rate (BuAc=1): No information found.
Application
1. Widely used in textile industry for vat dyeing, reduction cleaning, printing and stripping, textile textile bleaching .
2. bleaching paper pulps , especially mechanical pulps, its the most fittable bleaching agent in pulps.
3. bleaching kaolin clay, fur bleaching and reductive whitening, bleaching of bamboo products and straw products,
4. in mineral, the compound of thiourea and other sulphides.
5. as reducing agent in chemical industry.
6. Sodium hydrosulfite food additive grade is used in foodstuffs, as bleaching agent and preservative dried fruits, dried vegetable, vermicelli, glucose, sugar, rock sugar, caramel, candy, liquid glucose, bamboo shoots, mushrooms and canned mushrooms.
Packaging 50kg/100kg net in iron drums with double PVC bags
Product Specification/Models
NDEX 90%, 88%, 85%. FOOD ADDITIVE
Na2S2O4, 90%, 88%, 85%, Fe 20ppm ZincZnOther heavy metal
calculated as Pb, 1ppm
Water Insolubles05%
Shelf Life(month)12
3326 Engine Coolant Boiling Point Tester Suppliers
Short on time? Let Engine Coolant Boiling Point Tester sellers contact you.
Take 100gms of instant jam mix in a vessel and add 150ml of water(For 1 cup of jam mix 1 1/4cup of water). Mix well without lump formation.
Boil the mix for 5 mins and reduce the burner level to simmer.
Hold it for 5 minutes without stirring or until it reaches setting point of 1040C at low flame. Allow the jam mix to cool. Transfer the mix to sterilized container.
Ferro silicon Specs: Si:75%min. and Si:72%min. C:0.2%max. S:0.02%max. P:0.04%max. Al:2.0%max.1.5%max.and 1.0%max .Commodity: Ferro Silicon Low Al Specs: Si:75%min. C:0.2%max. S:0.02%max. P:0.04%max.Al:0.1%max.0.3%max.and0.5%max. In 1mt plastic woven bags.
Ferro Silicon Ferro Silicon has a melting point of 1200�¯�¿�½?�?�°C to 1250�¯�¿�½?�?�°C with a boiling point of 2355�¯�¿�½?�?�°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores.
POM Regrind from zipper Teeth, industry lump, industry runner
Definition of POM resin (polyformaldehyde resin): polyformaldehyde is a linear polymer without side chain, high density and high crystalline properties. According to different chemical structures in the molecular chain, there are two types of homoformaldehyde and copolymers. of both types of polyformaldehyde density, high crystallinity, melting point, but thermal stability, the treatment temperature range is narrow (about 10oC), slightly lower in acid and alkali stability; The density of formaldehyde, melting point, strength and copolymer is lower, but good thermal stability, not easy to decompose, wide range of treatment temperature (about 50oC), acid and alkali stability are good . Plastic has excellent all-round performance. Good physical, mechanical and chemical properties, especially with excellent friction resistance. It is commonly referred to as steel or strip, which is the general engineering plastic third. Suitable for reducing wear on parts, transmitters, chemicals, tools and other parts.
One of the synthetic resins, also known as polyformaldehyde resin, POM resin and steel, etc. This is a kind of white or black plastic resin with high hardness, high steel and high wear resistance. Used for gears, bearings, auto parts, machine tools, tools, etc.
MATERIAL: POM Regrind from zipper Teeth , industry lump, industry runner
CATEGORY: POM
TYPE: Regrind
SPECIFICATION: from zipper Teeth , industry lump, industry runner,Qty per month 52 mt
Origin: Bangladesh
LOADING WEIGHT: 24 Ton
FOB (USD/Ton): 650$ - 850$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
low oxygen Selenium Granules
Size: 2-6mm.3-5mm,1-10mm or as required
Molecular Formula - Se
Molecular Weight - 78.96
Melting Point - 217 C
Boiling Point - 684.9 + 1.0 C
Relative Density - 4.81 g /cm3
Purity - 99.99%
Appeaance - Black
Molecular Formula - C7H6O3
Molecular Weight - 138.12
Appearance - white crystalline powder
Density - 1.44g/cm3
Melting point - 158-161 C
Boiling point - 211 C (20 mmHg)
Assay - 99.0% min
Loss on drying - 0.5%max
Application - Pharmaceutical Intermediate
Ethanol alcohol distillation column
1. It is standard 95-96% alcohol equipment. Also it can distill pure water.
2.The distillation system has  three columns  and  continuous  distillation  process.The process is the  same as industrial(large scale) alcohol equipment.
 Mash distillation  column distills  fermented  mash or light alcohol  to 50% alcohol ethanol .
It has red copper bubble cap trays, standard design. It auto continuously feeds material liquid, auto continuously produces 50% alcohol ethanol and auto continuously discharges waste, Â ethanol discharge in waste 0.05%, better than international standard requirements.
The first rectification distillation  column  increases  alcohol degree  to 70-75% ,  separates  fusel oil and high boiling point  Impurities.  It auto discharges waste water,  ethanol discharge in waste 0.05%, better than international standard requirements.
The second rectification distillation  column  increases alcohol degree to 95%,  separates low boiling point  impurities  like acetaldehyde and methanol .
3.  The rectification system uses  industrial(large scale) standard process, but the whole set alcohol equipments are installed in one frame, like integration  module, even  you can run it by a button.
11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.
Ethylene glycol is a chemical commonly used in many commercial and industrial applications including antifreeze and coolant. Ethylene glycol helps keep your cars engine from freezing in the winter and acts as a coolant to reduce overheating in the summer.
Dipropylene glycol is a mixture of three isomeric chemical compounds, 4-oxa-2,6-heptandiol, 2--propan-1-ol, and 2--propan-1-ol. It is a colorless, nearly odorless liquid with a high boiling point and low toxicity
High quality lubricants for automotive & petroleum industries
bike oil: 20w40 api sn, 10w30 api sl, 20w50 api sl, 15w50 api sn, 20w40 api sm, 20w40 api sl
passenger car engine oil: 5w40 api sn, 5w30 api sn, 10w40 api sn, 5w30 api sm, 20w50 api sl, 15w40 api ch4
diesel engine oil: 15w40 api ci4 plus, 15w40 api ch4, 15w40 api cf4, 20w40 api cf4, 15w40 api ch4 lcv, 20w40 api ch4 multigrade cf / sf
gear oil: 75w90 gl5, 85w140 gl5, 80w90 gl4, 140 api gl4, 90 api gl4, utto 10w30
hydraulic oil: aw 68, aw 46, aw 32
automatic transmission fluid, brake fluid, coolant
industrial lubricants
our lubricants are also formulated to meet the stringent requirements of industrial applications, providing solutions for manufacturing, marine, and heavy duty machinery..International trade and shipping services worldwide
Specification
item
value
Classification
Alcohol
CAS No.
107-88-0
Other Names
1,3-Butanediol
MF
C4H10O2
EINECS No.
203-529-7
Place of Origin
China
Grade Standard
Industrial Grade, Medicine Grade
Purity
99.8
Appearance
colorless liquid
Application
solvent
Brand Name
chemfine
Model Number
Alcohol
Density
1.069
Boiling point
229.2
FLASH POINT
121
Melting point
20.1
5:Appearance and Properties: colorless transparent dense liquid
Products Description
Melting point
â??59 �°C(lit.)
Boiling point
101 �°C(lit.)
density
0.963 g/mL at 25 C
vapor density
>1 (vs air)
vapor pressure
<5 mm Hg ( 25 C)
refractive index
n20/D 1.377(lit.)
Fp
>270 C (518 F)
storage temp.
2-8C
form
Oily Liquid
color
Clear colorless
Specific Gravity
0.853
Odor
Odorless
Water Solubility
PRACTICALLY INSOLUBLE
