We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring.
Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.
Please feel free to contact us for further details
Carbon Blocks used in furnace having a great alternative against Petcoke.
As it has high melting power and cheap as compared to Petcoke.
Here in India, we are a supplier and exporters of Carbon blocks.
Prperties: The prduct is a white needle crystal r pwder. SP. GR. 2.8823.13g/ cm3, sublimatin temp. 1272Celsiur scale.Its slightly sluble in water and greatly sluble in HF liquid. The chemical prperty fr the high density aluminum fluride is very steady, but that cntains certain crystal water will be decmpsed int Al23 at high temperature with HF being released.
Specificatin:
grade chemical cmpsitin % Physical character
F Al N2 Fe2342- P25 LI Bulk dity g/cm3
AF-0 61.0 31.5 0.30 0.10 0.06 0.10 0.03 0.5 1.5
AF-1 60.0 31.0 0.40 0.30 0.10 0.6 0.04 1.0 1.3
AF-2 58.0 29.0 2.8 0.30 0.12 1.0 0.04 5.5 0.7
AF-3 58.0 29.0 2.8 0.35 0.12 1.0 0.04 5.5 0.7
Uses: Its mainly used as an adjusting agent fr electrlyte in aluminum smelting by fused salt electrlysis, als in ceramic glaze, catalyst and flux f nnferrus metal metallurgy etc.
Brief Intrductin f the Prductin Technics
In the Hydrgen Fluride Reacting Furnace which is heated utside, Vitril reacts with Flurite t create the Hydrgen Fluride Gas and Anhydrus Fluride Plaster by heating in the prcess f prducing Aluminum Fluride, then the Hydrgen Fluride Gas react with dry Aluminium Hydrxide in Fluidized Bed t create t Aluminum Fluride and water.
Packaging
packed in wven PP bags with plastic film inside. Each bag has net weight f 25kgs, 50kgs, 500kgs and 1000kgs.
Product Feature
Odor: Slight irritative.
Specific Gravity: Unavailable
Solubility: Soluble in water.
Density: 2.19
pH: 6-7
pH Test-Method: PH test paper.
% Volatiles by volume @ 21C (70F): 0
Boiling Point: Not applicable.
Melting Point: >300 C Decomposes.
Vapor Pressure (mm Hg): No information found.
Bulk Density: ~0.9
Evaporation Rate (BuAc=1): No information found.
Application
1. Widely used in textile industry for vat dyeing, reduction cleaning, printing and stripping, textile textile bleaching .
2. bleaching paper pulps , especially mechanical pulps, its the most fittable bleaching agent in pulps.
3. bleaching kaolin clay, fur bleaching and reductive whitening, bleaching of bamboo products and straw products,
4. in mineral, the compound of thiourea and other sulphides.
5. as reducing agent in chemical industry.
6. Sodium hydrosulfite food additive grade is used in foodstuffs, as bleaching agent and preservative dried fruits, dried vegetable, vermicelli, glucose, sugar, rock sugar, caramel, candy, liquid glucose, bamboo shoots, mushrooms and canned mushrooms.
Packaging 50kg/100kg net in iron drums with double PVC bags
Product Specification/Models
NDEX 90%, 88%, 85%. FOOD ADDITIVE
Na2S2O4, 90%, 88%, 85%, Fe 20ppm ZincZnOther heavy metal
calculated as Pb, 1ppm
Water Insolubles05%
Shelf Life(month)12
Bauxite is a soft, whitish to reddish-brown rock consisting mainly of alumina-bearing hydroxides, oxides of iron, silicon and titanium with impurities of Ca, Mg, Cr, V, P, Ga and other elements. Raw Bauxite is a major source of aluminium. Basic alumina containing minerals of Bauxites are gibbsite Al(OH)3, Boehmite g-AlO(OH) and Diaspore a-AlO(OH). We are a major Raw Bauxite Exporter based in Maharashtra (India) and catering to the diverse demands of several middle and eastern Asian countries.
About Raw Bauxite:
The processing of Raw Bauxite is done at a number of alumina refineries in the world. Bauxite can be processed at a low-temperature autoclave digestion (145 oC to 155 oC). Raw Bauxite can be used also for sweetening stage and for non-autoclave digestion in agitators (105 oC).
About 85% of bauxite mined worldwide is used to produce alumina for refining into Aluminium metal and the balance 15% is processed and value added to make its way to other uses like refractory, chemical, cement, abrasives, etc. Aluminium is possibly the most versatile product with applications in almost every industry. Since Bauxite is the primary source for Aluminium there will always be an ongoing promising demand for the same.
Application & Uses of Bauxite:
Raw Bauxite is successfully used for metallurgical grade alumina production besides applications in the cement industry, alumina chemical, steel, alum, energy industries, flame-retardants, etc. Bauxite is used in :
- Aluminium
- Cement
- Chemical
- Blast Furnaces
- Iron/Steel Ladles, etc.
Advantages of Artha Bauxite:
Artha Mineral Resources has good sources for Gibbsitic Bauxite which requires low digestion temperature (145 oC -155 oC) making it more economical to process. Mines are also in close proximity to all-weather ports which makes it very convenient and cost effective to ship this material.
We make high-quality copra by drying fresh coconut meat (kernel) in hybrid solar dryers. With efficient and continuous drying technology, we can reduce the moisture content of fresh coconut kernels from around 50% to lower than 6% within 48 hours. This result can be achieved by utilizing solar energy during daylight and renewable energy from smokeless biomass burning all night long.
Moisture content: maximum 6%, Free Fatty Acid content: maximum 0.5%, Green: 0%, Burnt: maximum 2%, Smoky: maximum 5%, Rubbery: maximum 5%
We only pick mature coconut fruits for the drying process, coconut must be put in a dryer immediately after opening to prevent microbes such as fungus, mold, and bacteria to grow. We keep the temperature in the oven dryer between 60 to 70 degrees Celsius. We inspect the copra periodically during the drying process, any damaged copra should be removed from the oven dryer immediately.
These are ideal for downstream users who wish to re-melt this residual form of aluminium in their own furnaces, and then cast it to produce a variety of end products. We supply primary and secondary Ingots and Billets from Middle East, Asia and Far East.
Manufacture Vegetable fruit high pressure bubble cleaner machine
According to different capapacity from 4m -7m length
The equipment is equipped with a bubble generating device to make the material tumble, remove the pesticide residue on the surface of the product, and add an appropriate amount of chemicals to disinfect and fix the color. Floating objects can overflow from the overflow tank, and sediment can be discharged from the drain outlet to achieve the purpose of cleaning. Energy-saving and water-saving, stable and reliable, easy to connect
Fresh corn cleaning production line ,clean vegetable cleaning and air drying assembly production line, prefabricated vegetable processing equipment,different capacity customized .
Machine features :
1.Universal adjustable nozzle, uniform spraying, stable without unhook, 360degree adjustable cleaning.
2.Circulating water tank, filter impurities in the product cleaning process to prevent clogging of the nozzle.
3.Automatic control, simple operation
4. Vortex air pump, strong wind, anti-seismic base, wear resistant.
5.Motor mute energy saving.
Corn bubble cleaner production line also can process :
Leaf vegetables, root vegetables, fruits, Chinese herbs, edible mushroom, aquatic products and seafood .
Good business investing low cost high profit!
meatball process line / machine meatball shape machine,meatball production line
The meatball forming machine adopts continuous output meatball system, which has high production efficiency, and is equipped with knives and shapers of different caliber, which can be replaced at will according to the requirements of users. The machine is mainly used to produce chicken balls, fish balls, shrimp balls, pork balls, beef balls, mutton balls, donkey balls, vegetable balls, seafood balls and other products.
The main equipment of meatball production line includes meat planer, mincing machine, chopping and mixing machine, stuffing mixing machine, meatball machine, forming water tank, frying production equipment, etc.
The machine is small in size, light in weight, low in noise, beautiful and generous, durable, easy to operate and maintain, efficient and energy-saving. The meat (FISH) balls produced are of good quality, smooth appearance, good roundness and uniform size. The frame body is made of 3mm thick stainless steel by bending and welding, which is solid for internal use. Wear resistant brass is used inside and outside the outlet.
capacity 50-420pcs/min ,voltage 380V/50Hz .
Variable frequency regulation meatball forming machine /meatball process line / machine meatball shape machine,meatball production line
The meatball forming machine adopts continuous output meatball system, which has high production efficiency, and is equipped with knives and shapers of different caliber, which can be replaced at will according to the requirements of users. The machine is mainly used to produce chicken balls, fish balls, shrimp balls, pork balls, beef balls, mutton balls, donkey balls, vegetable balls, seafood balls and other products.
The main equipment of meatball production line includes meat planer, mincing machine, chopping and mixing machine, stuffing mixing machine, meatball machine, forming water tank, frying production equipment, etc.
The machine is small in size, light in weight, low in noise, beautiful and generous, durable, easy to operate and maintain, efficient and energy-saving. The meat (FISH) balls produced are of good quality, smooth appearance, good roundness and uniform size. The frame body is made of 3mm thick stainless steel by bending and welding, which is solid for internal use. Wear resistant brass is used inside and outside the outlet.
capacity 50-420pcs/min ,voltage 380V/50Hz .
meatball making machine meatball forming machine meatball process line/production line with frequency control and no-frequency control .
The meatball forming machine adopts continuous output meatball system, which has high production efficiency, and is equipped with knives and shapers of different caliber, which can be replaced at will according to the requirements of users. The machine is mainly used to produce chicken balls, fish balls, shrimp balls, pork balls, beef balls, mutton balls, donkey balls, vegetable balls, seafood balls and other products.
The main equipment of meatball production line includes meat planer, mincing machine, chopping and mixing machine, stuffing mixing machine, meatball machine, forming water tank, frying production equipment, etc.
The machine is small in size, light in weight, low in noise, beautiful and generous, durable, easy to operate and maintain, efficient and energy-saving. The meat (FISH) balls produced are of good quality, smooth appearance, good roundness and uniform size. The frame body is made of 3mm thick stainless steel by bending and welding, which is solid for internal use. Wear resistant brass is used inside and outside the outlet.
Capacity 50-500pcs/min ,meatball diameters : 16-40mm, above 40mm big size meatball can customized mould .
Oil and slag removal integrated machine, automatic kitchen oil-water separator ,kitchen oil separator . Capacity 3m3/h -50m3/h . Can customized ! Deoil reate 90% .
Use for : Hotels, hospitals, schools, food cities, restaurants,factory ,ship/vessel restaurants
Equipment principle:
The kitchen waste treatment equipment belongs to aerobic bacteria and reduced biochemical waste treatment equipment,
It is characterized by relatively small volume, flexible installation, fast processing speed of kitchen waste, less residue and no secondary pollution.
Technical advantages:
Source control
Source control of kitchen organic waste, local treatment and prevention of secondary pollution
Resource reuse
Reuse of resources. The food waste will be turned into organic fertilizer after treatment. The waste reduction rate and resource utilization rate are high
cost reduction
Integrated design and installation of equipment are convenient and fast, reducing the cost of civil construction
Fully automatic control
Fully automatic control of equipment, simple and convenient operation, saving manpower and material resources
Ecological and environmental protection
The equipment has air treatment capacity and sewage treatment capacity, which will not pollute the surrounding environment of the equipment room and affect people's livelihood
Economical and practical
Low energy consumption, low maintenance cost, economical and practical.
Belt press juicing machine for fruit vegetable
Use for :
01.fruit juice 02.vegetable dehydration or juce 03.enzyme juice
04.Extraction of medicinal juice
1. High lift and large flow, strong pumping force, not easy to block, precision casting pump body, lasting work, high efficiency and energy saving, after-sales guarantee
2. Long service life. The product is equipped with a new automatic deviation correction and tension system, automatic operation, uniform distribution of materials, extended filter bag life, and long bearing service life
3. Rust-proof and corrosion-resistant, tough shell, stable operation, unique oblique lengthened wedge design, more stable operation and low noise
4. The treatment effect is good. Two sets of independent backwashing systems are adopted. The multi-roll diameter decreasing backlogs are compact in layout and the filter cake has high solid content.
5. Efficient, convenient and ultra-long gravity dewatering area, with large bearing capacity, strong processing capacity, low power consumption and low operating cost
6. Juice yield 85%
Small capacity 500-3000kg/h,filter belt width 500-2000mm,power 1.5-3kw,
filter belt speed 1.5-3.5m
Big capacity 3-20T/hour,power 14.7-41kw ,machine size length 3100-5420mm
Width 1475-3430mm high 1820-2420mm
Flavored syrup is one kind of ingredients which make cocktail more delicious and tasty, it is produced by adopting the science batching and the advanced technology after the processing of concentrated, flavored, sterilized,it is widely applied in making cocktail for public bar and other entertainment venues;what�¢??s more, there are all kinds of flavor to choose.
Package Dimensions 34.4 x 30.4 x 8.1 cm; 1.59 Kilograms
Volume 700 Millilitres
Units 700 millilitre
Alcohol Content 0.07 Percent by Volume
Brand Monin
Speciality Suitable for Vegetarians
Caffeine content Caffeine free
Nutrition Facts per 100 ml:
Vanilla syrup: Energy: 340 kcal/1422 kJ; Fat: 0 g, of which saturates: 0 g; Carbohydrate: 84.1 g, of which sugars: 83.7 g; Fibres: 0 g; Protein: 0 g; Sodium: 11.3 mg; Salt: 0.03 g. Caramel syrup: Energy: 323 kcal/1349 kJ; Fat: 0 g, of which saturates: 0 g; Carbohydrate: 79.3 g, of which sugars: 79.3 g; Fibres: 0 g, Sodium: 10.54 mg; Salt: 0.03 g. Gingerbread syrup: Energy: 337 kcal/1407 kJ; Fat: 0 g, of which saturates: 0 g; Carbohydrate: 83.6 g, of which sugars: 83.5 g; Fibres: : 0 g; Sodium: 11.27 mg; Salt: 0.03 g. Hazelnut syrup: Energy: 314 kcal/1313 kJ; Fat: 0 g, of which saturates: 0 g; Carbohydrate: 78.6 g, of which sugars: 78.2 g; Fibres: 0 g; Protein: 0 g; Sodium: 10.7 mg; Salt: 0.03 g. Amaretto syrup: Energy: 329 kcal/1378 kJ; Fat: 0 g, of which saturates: 0 g; Carbohydrate: 82.3 g, of which sugars: 81.3 g; Fibres: 0 g; Protein: 0 g; Sodium: 11.1 mg; Salt: 0.03 g.
Raw melting material - aluminum scraps, cans, engine waste etc.
Output capacity - 5-30 tons/h, customized
Automation - Full automatic/ half automatic (based on output requirement and investment budget
Ingot type - ADC12 (7.5kg/ 10kg / customized)
1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift;
2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing.
Every lot of production need to do testing .
3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water.
4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500
5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
12149 Energy Saving 0 5T Induction Melting Furnace Suppliers
Short on time? Let Energy Saving 0 5T Induction Melting Furnace sellers contact you.
