Overview
Type NDX pump is applicable for pumping clean water and liquids whose physical and chemical properties are similar to water and without solid particles.
This series of products can be used in factories,mines,urban water supply and drainage,HAVC,industrial softened water and farmland irrigation and drainage,etc.It can also be used in pressure stabilization and water supply systems of urban fire control.
Pump with the same specification can change the performance parameters by cutting the outer diameter of the impeller;the normal speed of the pump is 1450RPM and 2900RPM, if it is required to operate at the maximum speed of 3550RPM(60Hz power supply or with gasoline and diesel engine),our company can provide technical instruction on the change of the outer diameter of the impeller
The type NDX pump features simple structure,reliable performance,small volume,light weight,high efficiency,good ati-cavitation performance, low power consumption and convenient use and maintenance
The pump is suitable for pumping medium at temperature of -10~85 and working pressure of 1.0MPa,if there is a need to increase to 1.6MPa or higher,please specify when selecting and ordering
Performance
 Capacity: 5-1650m3/h
 Head: 5-135 m
Product Features
Energy efficient: Applying the most advanced NRCE design software and CFD fluid simulation software to develop and design the high efficiency hydraulic model,through the analysis of pump flow field,temperature field and strength,thermal deformation,fracture,rotor dynamics,etc,to achieve high efficiency ,reliability and wide efficiency zone,we have made the pump satisfy the efficiency and reliability requirements of centrifugal pump operating under design conditions and non-design conditions, reaching the international advanced level.
Rear opening type structure:The maintenance is convenient,It is not necessary to disassemble the suction and discharge pipes during maintenance to pull out the rotor parts for maintenance
Quality assurance:Before casting,the imported chemical analysis of the materials was carried out by the direct reading spectrum analyzer introduced from Britain to ensure that the material composition meets the requirement.The pump impeller and rotor components are tested by precise dynamic balance test,so the pump can run more smoothly, have less vibration and noise and longer service life.
Product orientation:Improve the technical level of the domestic equipment industry, effectively serve equipment and processes to meet the needs of safety,reliability,energy conservation and environmental Protection.
INSTALLATIONS AND USE .For pumping clean liquids without abrasive particles, which are chemically non aggressive to the pump materials .For water supply .For heating, air- conditioning, cooling and circulation plants .For civil and industrial applications .For firefighting applications .For...
Pipeline centrifugal pumps are general-purpose equipment for conveying clear water and liquids with similar physical and chemical properties, widely used in industrial and urban water supply and drainage, high-rise building pressure boosting, fire-fighting systems, HVAC circulation and other fields [2]. According to the installation form can be divided into vertical and horizontal, according to the impeller structure is divided into closed, open and semi-open [1], the adaptable medium temperature range -20 â?? to 240 â?? [3], typical models include ISG, ISW, IRG, etc. [2] [4].
The equipment consists of impeller, pump body, sealing ring and other core components, the impeller rotates to generate centrifugal force to achieve liquid transport, the pump body plays a supporting role, and the sealing system to protect the operating vacuum. It adopts modular piping design, equipped with high-efficiency hydraulic model, supports electric drive and direct connection structure, featuring low noise, small footprint and easy maintenance. Installation requires precise calculation of suction height and ensuring pipeline sealing, and the performance curve reflects the relationship between flow rate, head and power [4]. Common faults such as air binding can be solved by filling water and exhausting air, and the bearings and sealing parts need to be overhauled regularly [2].
Product Description
Pump type EA series single stage end suction centrifugal pump
Design Standard European standard BS EN733/DIN24255
Structure Horizontal,Axial End-Suction,Single-Stage,Volute Casing,Back pull-out
Discharge Size DN32~300mm
Flange DIN2501 PN16 GB/T17241.6 PN1.6
Casing Cast Iron standard,Ductile Iron/ASTM304/ASTM316 options on request
Impeller Brass standard,Cast Iron/ASTM304/ASTM316 options on request
Shaft ASTM420 standard,ASTM304/ASTM316/ASTM1045 options on request
Shaft Seal Mechanical Seal standard,Gland Packing options on request
Flow Rate(Q) 4~1584m3/h
Head(H) 2~150m
Speed 1450/2900rpm(50Hz);1750/3500 rpm(60Hz)
Max Temperature 85�°C(standard);105�°C(option on request)
Working Pressure 1.0MPa(standard);1.6MPa(option on request)
Conveying Medium Clean water or liquids similar to clean water in physical property
Advantage Interchangeable parts,high effective,high performance,voice-saving, easily installed and maintained
Applications Water supply and drainage,HVAC and Cooling Tower,marine-Ballasting&Bilge,booster and pressurization set,irrigation and agriculture,fire-fighting system,plants,mines,food and chemical industry(with stainless steel),etc.
15508 End Suction Horizontal Centrifugal Water Pump Suppliers
Short on time? Let End Suction Horizontal Centrifugal Water Pump sellers contact you.
Design Features:
Horizontal Centrifugal, Back-Pull-Out type pump fitted with single stage closed Impeller in foot mounted Volute Casing having axial end suction and Vertical centerline delivery.
Applications:
To handle Hydrocarbons, Volatile Liquids, Thermic Fluids and Corrosives in Chemical / Petrochemical / Fertilizer / Sugar / Paper and other Process Industries.
Custom-built Design:
Pumps with different material of construction can be offered on request.
General
Type GSX series product is characterized by broad comprehensive performance curve,sound hydraulic performance, novel structure,high efficiency,high reliability,low net positive suction head ,and low maintenance.
The design,manufacture,and quality of this series product meet the standard of GB/T5656 Technical conditions for centrifugal pumps-Class II and its efficiency indexes meet the standard of GB/T19762 The minimum allowable values of energy efficiency and evaluating values of energy conservation of centrifugal pump for fresh water
Application
GSX series products are mainly used for transport fresh water or other liquid with similar physicochemical properties to fresh water,it can also be widely applied in water supply and drainage system or circulation cooling water system for steel,petrochemical,thermal power generation,mining,and other working conditions
Performance range
 Capacity 95~9000m3/h
Head 6~205m
Temperature 80 cooling structure will be adopted for bearing, the material of casing & cover is QT500-7 150
Speed 740~2970r/min
Inlet diameter 125~900mm
 Outlet diameter 80~900mm
Structural feature
1.Sealing
Superior mechanical seal,long term operation without leakage
Mechanical seal,strong interchangeability for universal use by non-asbestos soft packing structure and injection type packing structure
Stainless steel shaft sleeve for easy maintenance
Half packing gland,large space for packing replacement
2.Protective cover
Half-split structure,comply with IE standard,safe and reliable
3.Casing
Circular pressure chamber design with high efficiency
Double-volute pumping chamber is with balanced radial force and sound strength; bearing and seal are with small force withstanding and long service life
Water suction chamber is with split rib design;inlet is without vortex and noise while with stable operation and sound cavitation performance
The inlet and outlet water channels are coated with smooth wear-resistant coating,and water loss is small
Auto-correct pump cover for easy installation
Inlet DN 500 for universal use by vertical and horizontal types
Â
4.Bearing
Short span and enlarged diameter design, stable operation and long service life.
Grease lubrication with small and medium pump,online refueling
Provided with online vibration and temperature measuring devices to ensure safety operation
Transfer high temperature liquid,employ water-cooling structure
5.Shaft
Bold design,universal use for 50HZ and 60HZ pump shaft,sound rigidity, and stable operation
Full sealing design, no contact with liquid, and easy maintenance
Allow short-time inversion, common shaft for forward and reverse rotations
ZGB slurry pump is a cantilevered horizontal double-case centrifugal slurry pump, designed for transporting highly abrasive or corrosive media, widely used in electric power, metallurgy, mining, coal and other industries [1-3]. The pump adopts high chrome alloy flow-through parts, both abrasion resistance and corrosion resistance, supporting a maximum working pressure of 3.6Mpa and multi-stage tandem application [1-2] [4]. Its structure combines combined sealing and mechanical sealing technology, combined with wide and smooth flow channels and thin oil lubrication system to ensure low leakage rate and high reliability [1] [3-4]. Typical applications include ash conveying in power plants, with technical parameters ranging from 23.9 to 94.2 m head and 10.5 to 533.3 m3/hour flow.
The Jalapeno is variously named in Mexico as huachinango and chile gordo. The cuaresmeno closely resembles the Jalapeno. The seeds of a cuaresmeno have the heat of a Jalapeno, but the flesh has a mild flavor close to a green bell pepper.
As of 1999, 5,500 acres (22 km2) in the United States were dedicated to the cultivation of Jalapeno s. Most Jalapeno s are produced in southern New Mexico and western Texas.
Jalapeno s are a pod type of Capsicum. The growing period is 70–80 days. When mature, the plant stands two and a half to three feet tall. Typically a plant produces twenty-five to thirty-five pods. During a growing period, a plant will be picked multiple times. As the growing season ends, Jalapeno s start to turn red.
Once picked, individual peppers ripen to red of their own accord. The peppers can be eaten green or red.
Jalapenos have 2,500 - 8,000 Scoville heat units. Compared to other chillies, the Jalapeno has a heat level that varies from mild to hot depending on cultivation and preparation. The heat, caused by capsaicin and related compounds, is concentrated in the veins (placenta) surrounding the seeds, which are called picante. Handling fresh Jalapeno s may cause skin irritation. Some handlers wear latex or vinyl gloves while cutting, skinning, or seeding Jalapeno s. When preparing Jalapeno s, hands should not come in contact with the eyes as this leads to burning and redness.
Jalapeno is of Nahuatl and Spanish origin. The Spanish suffix -eno signifies that the noun originates in the place modified by the suffix, similar to the English - (i) an. The Jalapeno is named after the Mexican town of Xalapa (also spelled Jalapa). Xalapa is itself of Nahuatl derivation, formed from roots xal-li "sand" and a-pan "water place."
A Jalapeno plant with pods. The purple strips on the stem are anthocyanin, due to the growth under blue-green spectrum fluorescent lighting.
Five Jalapeno peppers.
- A chipotle is a smoked, ripe Jalapeno.
- Jalapeno jelly can be prepared using jellying methods.
- Jalapeno peppers are often muddled and served in mixed drinks.
- Texas Toothpicks are Jalapeno s and onions shaved into straws, lightly breaded, and deep fried.
- Jalapeno Poppers, also called Armadillo eggs, are an appetizer; Jalapeno s are stuffed with cheese, usually cheddar or cream cheese, breaded and deep fried.
Centrifugal Pump VOLUTE ECD Series can be used for the following services in commercial, residential, agriculture industrial processing petroleum, food & beverage industries.
Overview
Type NDX pump is applicable for pumping clean water and liquids whose physical and chemical properties are similar to water and without solid particles.
This series of products can be used in factories,mines,urban water supply and drainage,HAVC,industrial softened water and farmland irrigation and drainage,etc.It can also be used in pressure stabilization and water supply systems of urban fire control.
Pump with the same specification can change the performance parameters by cutting the outer diameter of the impeller;the normal speed of the pump is 1450RPM and 2900RPM, if it is required to operate at the maximum speed of 3550RPM(60Hz power supply or with gasoline and diesel engine),our company can provide technical instruction on the change of the outer diameter of the impeller
The type NDX pump features simple structure,reliable performance,small volume,light weight,high efficiency,good ati-cavitation performance, low power consumption and convenient use and maintenance
The pump is suitable for pumping medium at temperature of -10~85â?? and working pressure of 1.0MPa,if there is a need to increase to 1.6MPa or higher,please specify when selecting and ordering
Performance
 Capacity: 5-1650m3/h
 Head: 5-135 m
Product Features
Energy efficient: Applying the most advanced NRCE design software and CFD fluid simulation software to develop and design the high efficiency hydraulic model,through the analysis of pump flow field,temperature field and strength,thermal deformation,fracture,rotor dynamics,etc,to achieve high efficiency ,reliability and wide efficiency zone,we have made the pump satisfy the efficiency and reliability requirements of centrifugal pump operating under design conditions and non-design conditions, reaching the international advanced level.
Rear opening type structure:The maintenance is convenient,It is not necessary to disassemble the suction and discharge pipes during maintenance to pull out the rotor parts for maintenance
Quality assurance:Before casting,the imported chemical analysis of the materials was carried out by the direct reading spectrum analyzer introduced from Britain to ensure that the material composition meets the requirement.The pump impeller and rotor components are tested by precise dynamic balance test,so the pump can run more smoothly, have less vibration and noise and longer service life.
Product orientation:Improve the technical level of the domestic equipment industry, effectively serve equipment and processes to meet the needs of safety,reliability,energy conservation and environmental Protection.
HF Series is an single stage end- suction horizontal chemical centrifugal pump. it is in accordance with international standards ISO2858 and non-metallic Horizontal type pump technology combined with design and manufacturing. Pump body metal shell processing dovetail groove lined with FEP (F46), pump cover, impeller and the sleeve are embedded pieces of metal sintering suppression of the overall outsourcing of fluorine plastic. There are made of HT200 cast iron lining with Teflon PTFE / PEP(F46)/ PFA , impeller made by WCB wrapped by PTFE / PEP(F46)/ PFA, which grantee this type centrifugal pump could widely used in corrosive application and wear well.
Mechanical seal is outside seal, stationary seal is alumina ceramic ( 99.9%)(or silicon nitride ,silicon carbide) , rotating seal is PTFE filling material or according to customer request. It is also can be made cartridge type mechanical seal.
Advantage:
High corrosive, well leak-proof, easy assembly and maintenance.
Application Field :
Acid pickling process
Painting process
Textile ,Dyes industry, etc
Pharmacy & Pesticides
Electroplating industry
Chlorine water and waste water treatment
Petroleum & Pharmaceutical Industry
Chemical Industry
Adding acid process
Non-ferrous metals smelting of electrolyte transport
Hydroxypropyl Methylcellulose (HPMC) is a versatile, non-ionic cellulose ether derived from natural sources, widely used as a thickener, binder, film-former, and stabilizer in pharmaceuticals, construction, food, cosmetics, and industrial applications. It offers excellent water retention, high viscosity, and improved texture in end products. HPMC is odorless, tasteless, non-toxic, and available in various viscosity grades in free-flowing powder form.
The soap dish is made from high quality wooden/ bamboo material.
Hard material, resistant to pressure, not easily deformed, and not easy to absorb water and deteriorate.
Reasonable and simple design increases the ventilation and suction efficiency of the product, and the shape is more beautiful and compact.
Structured filtered water makes soap easier to keep dry, and adds vitality to your home.
COCONUT SHELL SOAP DISH
Using a soap dish is key to keeping your handmade soap lasting a long time since sitting in water will speed up the deterioration of the soap.
Must have one in the bathroom. Simple and practical soapbox, draining holes on the bottom for easy draining. Suction cup design, easy to install, saving space.
WATER HYACINTH OTTOMAN CHAIR
Add a new element of functionality to any living space with this gorgeous woven ottoman. This ottoman is the perfect size to function as a footrest for any accent chair, or can even function as a stand for photo frames, a tray or decorative items. This multi-functional ottoman is also a great easy solution for extra living room seating while guests are over, and can even be used as an end/side table next to a chair or sofa. The gorgeous weave on this ottoman, rich in color and made with the utmost craftsmanship will be a guaranteed stunning addition to any room. With two timeless shape choices, round and square, you are sure to find your perfect fit.
Terry towel, bath towel, hand towel, ayurvedic products, heat pump, water heater, power tools, hand tools.Merchant exporter, packaging , transport , shipping
