Befact technologies launches embedded quad port pse module, pse-qd in september, 2008. Pse-qd is standard and ieee802.3af compliant embedded power sourcing equipment module. Befact puts high emphasis on safety issue, so we provide double protection mechanism to protect your design. Pse modules not only equip per port over current protection (pse-qd, 450ma/per port) but also have total power limit protection (pse-qd maximum total power protection, 109w). Besides, pse-qd still provide under/over voltage protection, so befact would like to recommend you this more safer and higher quality poe total solution to make you feel convenient when you design.
Below are the key features of pse-qd
1.Ieee802.3af compliant.
2.Per port maximum output pse-qd, 450ma
3.Maximum total power protection.
4.Support pd power classification from class 0 to class 4.
5.Per port over/under voltage protection.
6.Per port short circuit protection.
7.Per port over current protection.
8.Thermal cut off.
9.Equip common mode choke (per port) to reduce emi.
10.Enhance current surge protection.
11.Per port pse status indication.
Pse-qd can support double power mode operation (pse-qd, 40w/per rj45 port) for high power consumption remote device, and so do thpd& tpd module. For example, when pse-qd & tpd-12 are applied in the same poe link simultaneously and they are operated in dual power mode, tpd-12 can offer up to 24w to remote device. So befact poe solution is also suitable for high power consumption product to utilize. If you are interested in befact technologies poe total solution, welcome to visit befcat technologies website detail information.
Befact technologies launches embedded quad port pse module, pse-hqd(high power) in september, 2008. Pse-hqd is standard and ieee802.3af compliant embedded power sourcing equipment module. Also, pse-hqd supports high power mode. Befact puts high emphasis on safety issue, so we provide double protection mechanism to protect your design. Pse modules not only equip per port over current protection (pse-hqd, 650ma/per port) but also have total power limit protection (pse-hqd maximum total power protection, 160w). Besides, pse-qd and pse-hqd still provide under/over voltage protection, so befact would like to recommend you this more safer and higher quality poe+ total solution to make you feel convenient when you design.
Below are the key features of pse-hqd
Ieee802.3af compliant.
Per port maximum output pse-hqd, 650ma.
Pse-hqd supports high power mode and backward compatible to normal power mode.
Maximum total power protection.
Support pd power classification from class 0 to class 4.
Per port over/under voltage protection.
Per port short circuit protection.
Per port over current protection.
Thermal cut off.
Equip common mode choke (per port) to reduce emi.
Enhance current surge protection.
Per port pse status indication.
Befact technologies announces two series of embedded tiny poe pd module - high power (thpd) & normal power (tpd). According to the output voltage, tpd&thpd series modules support three output voltage-3.3v, 5v and 12v. Embedded tiny poe pd module extracts power from pse via conventional category 5 ethernet cable. The application of tiny poe pd module is wireless access point, access point, ip camera, media converter, ptz camera, wimax, voip phone, surveillance/security system.
The main features of tpd-50 are as following
A.Isolated pd module, isolation level 1.5kv
B.Ieee802.3af compliant.
C.Support wide input voltage range, 39vdc to 55vdc.
D.High dc/dc converting efficiency, 86%. The output power is 12w(tpd-50)
E.Tiny size 60mm(l) x 19.7mm(w)x16mm(h).
F.Thermal cut off & short circuit protection.
G.The operating temperature is from -15oc to 55oc, @full load.
The output power of tpd module depends on its loading, too. High dc/dc converting efficiency lowers the heat accumulation and temperature of tpd-50 modules.
Befact technologies announces two series of embedded tiny poe pd module - high power (thpd) & normal power (tpd). According to the output voltage, tpd&thpd series modules support three output voltage-3.3v, 5v and 12v. Embedded tiny poe pd module extracts power from pse via conventional category 5 ethernet cable. The application of tiny poe pd module is wireless access point, access point, ip camera, media converter, ptz camera, wimax, voip phone, surveillance/security system.
Below are the main features of thpd-33 modules
A.Isolated pd module, isolation level 1.5kv
B.Backward compatible ieee802.3af
C.Support wide input voltage range, 36vdc to 55vdc.
D.High dc/dc converting efficiency, 74%. The output power can reach 16w(thpd-33)
E.Tiny size 75mm(l) x 22mm(w)x15.5mm(h)
F.Thermal cut off & short circuit protection.
G.The operating temperature is from -15oc to 55oc, @full load.
The output power of thpd module depends on its loading. Also, the tiny size of thpd module increases pcb utilizing space.
High dc/dc converting efficiency lowers the heat accumulation and temperature of thpd-33 modules.
Befact technologies announces two series of embedded tiny poe pd module - high power (thpd) & normal power (tpd). According to the output voltage, tpd&thpd series modules support three output voltage-3.3v, 5v and 12v. Embedded tiny poe pd module extracts power from pse via conventional category 5 ethernet cable. The application of tiny poe pd module is wireless access point, access point, ip camera, media converter, ptz camera, wimax, voip phone, surveillance/security system.
The main features of tpd-12 are as following
A.Isolated pd module, isolation level 1.5kv
B.Ieee802.3af compliant.
C.Support wide input voltage range, 39vdc to 55vdc.
D.High dc/dc converting efficiency, 89%. The output power is 12w(tpd-12)
E.Tiny size 60mm(l) x 19.7mm(w)x16mm(h))
F.Thermal cut off & short circuit protection.
G.The operating temperature is from -15oc to 55oc, @full load.
The output power of tpd module depends on its loading, too. High dc/dc converting efficiency lowers the heat accumulation and temperature of tpd-12 modules.
1.Tiny size 60mm(l) x 19.7mm(w)x16mm(h))
841 Embedded Normal Power Poe Pd Module(Pse Qd) Suppliers
Short on time? Let Embedded Normal Power Poe Pd Module(Pse Qd) sellers contact you.
The SANDI solar charge controller adopts advanced digital control technology, touching keys and automatically operation. With the features of PWM (Pulse Width Modulation) battery charging and unique control technology, the PV charge controller improves battery life efficiently. The PV charge controller is only suitable for controlling solar modules. Never connect any other types of charging source to the controller. This can destroy the controller and/or the charging source permanently.
To meet different solar power stations need, there are 48V 96V 120V192V 220V 240V 360V 384V 480V 492V and 600V other normal series voltage level base on different battery voltage of off-grid PV power station system project.
Product Feature:
1, The solar controller uses high performance 32-bit chips which is excellent EMC design
2, The controller adopts advanced PID algorithm which has more accurate battery energy management system to improve the battery efficiency 45% at least
3, The controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of photovoltaic modules and batteries
4, IGBT Modular design ensure stable and efficiency performance of solar controller and solar power system
5, The controller has perfect battery protection function and with multi-stage charging technology to improve battery life 35% at least
6, The controller has double loop control function of voltage loop and current loop, user can set the limiting charging current
7, Fully enclosed duct design and high-speed fan for cooling makes the controller working under harsh environments
8, The controller has power generation statistics and real-time power curve function, so we can know power generating information at any time
9, Colorful LCD display, touching key and multi-language option makes the HMC (Human Machine communication) easy and convenient. Users also can set working parameters through the LCD panel and touching keys according to different battery feature
10, The controller also has temperature compensation function and RTC real time clock function,
11, Standard Modbus protocol for RS-485 or GPRS communication to extend the communication distance (optional function)
12, The patent of second protection function which can protect battery from over charging due to power switch failure (optional function)
The SANDI solar charge controller adopts advanced digital control technology, touching keys and automatically operation. With the features of PWM (Pulse Width Modulation) battery charging and unique control technology, the PV charge controller improves battery life efficiently. The PV charge controller is only suitable for controlling solar modules. Never connect any other types of charging source to the controller. This can destroy the controller and/or the charging source permanently.
To meet different solar power stationsâ?? need, there are 48Vã??96Vã??120Vã??192Vã??220Vã??240Vã?? 360Vã??384Vã??480Vã??492V and 600V other normal series voltage level base on different battery voltage of off-grid PV power station system project.
Product Feature:
1, The solar controller uses high performance 32-bit chips which is excellent EMC design
2, The controller adopts advanced PID algorithm which has more accurate battery energy management system to improve the battery efficiency 45% at least
3, The controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of photovoltaic modules and batteries
4, IGBT Modular design ensure stable and efficiency performance of solar controller and solar power system
5, The controller has perfect battery protection function and with multi-stage charging technology to improve battery life 35% at least
6, The controller has double loop control function of voltage loop and current loop, user can set the limiting charging current
7, Fully enclosed duct design and high-speed fan for cooling makes the controller working under harsh environments
8, The controller has power generation statistics and real-time power curve function, so we can know power generating information at any time
9, Colorful LCD display, touching key and multi-language option makes the HMC (Human Machine communication) easy and convenient. Users also can set working parameters through the LCD panel and touching keys according to different battery feature
10, The controller also has temperature compensation function and RTC real time clock function,
11, Standard Modbus protocol for RS-485 or GPRS communication to extend the communication distance (optional function)
12, The patent of second protection function which can protect battery from over charging due to power switch failure (optional function)
The SANDI solar charge controller adopts advanced digital control technology, touching keys and automatically operation. With the features of PWM (Pulse Width Modulation) battery charging and unique control technology, the PV charge controller improves battery life efficiently. The PV charge controller is only suitable for controlling solar modules. Never connect any other types of charging source to the controller. This can destroy the controller and/or the charging source permanently.
To meet different solar power stations need, there are 48V 96V 120V 192V 220V 240V 360V 384V 480V 492V and 600V other normal series voltage level base on different battery voltage of off-grid PV power station system project.
Product Feature:
1, The solar controller uses high performance 32-bit chips which is excellent EMC design
2, The controller adopts advanced PID algorithm which has more accurate battery energy management system to improve the battery efficiency 45% at least
3, The controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of photovoltaic modules and batteries
4, IGBT Modular design ensure stable and efficiency performance of solar controller and solar power system
5, The controller has perfect battery protection function and with multi-stage charging technology to improve battery life 35% at least
6, The controller has double loop control function of voltage loop and current loop, user can set the limiting charging current
7, Fully enclosed duct design and high-speed fan for cooling makes the controller working under harsh environments
8, The controller has power generation statistics and real-time power curve function, so we can know power generating information at any time
9, Colorful LCD display, touching key and multi-language option makes the HMC (Human Machine communication) easy and convenient. Users also can set working parameters through the LCD panel and touching keys according to different battery feature
10, The controller also has temperature compensation function and RTC real time clock function,
11, Standard Modbus protocol for RS-485 or GPRS communication to extend the communication distance (optional function)
12, The patent of second protection function which can protect battery from over charging due to power switch failure (optional function)
Product Description - MT 50 Un-Contact Based Thermal Network Camera
Price of product ( USD price or FOB price) - FOB USD $399
Product origin - Made in Korea
Key Specifications/Special Features - Application for fever detecting , Fire Signal Alarm and Security
Multi Camera monitoring from anywhere/ anytime with PC, NVR & Smartphone Accurate temperature measurement by by Calibration and Blackbody function Face Recognition : AI / Machine learning Camera :80x60 Shuttered or Shuttuerless sensor Module, Ethernet, H.264, ONVIF
Monitoring System: PC Viewer, Smartphone Viewer APP( Android, IOS) Server: p2p Relay Server (any Where, Real time ) Frame rate: 1~30 Frame / sec Power: 5V/1A, POE Splitter
Measuring range: -20 C~100 C
(Extensible to 200 C)
Minimum Order Size and Packgaing details -
MOQ :20
Inbox :One Camera
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic.
Functional details
1. Hot plug
Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system.
2. Advanced current sharing technology
Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A.
3. Control of input limited power
Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode.
4. Control of output constant power
When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module.
The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V.
The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage.
5. Temperature limited power
6. Regulation of output current limiting point
8. Regulation of output voltage
The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc.
9. Fan control
The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module.
10. Protection of input overvoltage/ voltage shortage
11. Output overvoltage protection
The overvoltage protection point is 260Vdc ~770Vdc ( +10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection.
12. Over-temperature protection
The environmental over-temperature protection point is 80 C. When the DC panel has a temperature over 100 C, the module will stop working; when the DC panel has a temperature below 90 C, the module will automatically work again.
13. Protection of internal bus fault
When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on.
14. Short circuit protection
In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic.
Functional details
1. Hot plug
Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system.
2. Advanced current sharing technology
Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A.
3. Control of input limited power
Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode.
4. Control of output constant power
When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module.
The SD75200 module uses two operating modes with output voltage ranges of 50 to 750V.
The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage.
5. Temperature limited power
6. Regulation of output current limiting point
8. Regulation of output voltage
The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc.
9. Fan control
The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module.
10. Protection of input overvoltage/ voltage shortage
11. Output overvoltage protection
The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection.
12. Over-temperature protection
The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again.
13. Protection of internal bus fault
When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on.
14. Short circuit protection
In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic.
Functional details
1. Hot plug
Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system.
2. Advanced current sharing technology
Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A.
3. Control of input limited power
Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode.
4. Control of output constant power
When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module.
The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V.
The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage.
5. Temperature limited power
6. Regulation of output current limiting point
8. Regulation of output voltage
The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc.
9. Fan control
The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module.
10. Protection of input overvoltage/ voltage shortage
11. Output overvoltage protection
The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection.
12. Over-temperature protection
The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again.
13. Protection of internal bus fault
When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on.
14. Short circuit protection
In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic.
Functional details
1. Hot plug
Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system.
2. Advanced current sharing technology
Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A.
3. Control of input limited power
Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode.
4. Control of output constant power
When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module.
The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V.
The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage.
5. Temperature limited power
6. Regulation of output current limiting point
8. Regulation of output voltage
The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc.
9. Fan control
The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module.
10. Protection of input overvoltage/ voltage shortage
11. Output overvoltage protection
The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection.
12. Over-temperature protection
The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again.
13. Protection of internal bus fault
When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on.
14. Short circuit protection
In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic.
Functional details
1. Hot plug
Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system.
2. Advanced current sharing technology
Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A.
3. Control of input limited power
Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode.
4. Control of output constant power
When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module.
The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V.
The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage.
5. Temperature limited power
6. Regulation of output current limiting point
8. Regulation of output voltage
The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc.
9. Fan control
The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module.
10. Protection of input overvoltage/ voltage shortage
11. Output overvoltage protection
The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection.
12. Over-temperature protection
The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again.
13. Protection of internal bus fault
When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on.
14. Short circuit protection
In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Embedded high power tiny poe PD module(thpd-12, thpd-50, thpd-33, tpd-12, tpd-50, tpd-33), embedded normal power tiny poe pse module(pse-hqd, pse-qd).Hardware design service
Model:
32V 250mA for HP Deskjet 3300 3400 Seriesï¼?HP Deskjet 3320, 3320v, 3322, 3420, 3420v, 3425, 3450
Output: 32V 250mA
Power cord: UK US EU AU Power Cord
Outlet: 2/3 prong
Size: 15X15X6 cm (L x W x H)
Packing: Brown box with pe bag and bubble bag; 49*39*34CM(L x W x H) for a master carton size
Delivery Date: Within 2-3 working days after confirming the payment
Test: Temperature test; Vibration test; Drop-Test; Overcharging and discharging test
Line Regulation: +/-5%
Load Regulation +/-5%
Model:
29V 2A AC DC Switching Power Supply Transformer for Lazy Boy Lift Chair, Hmleaf Recliner Lift Chair, Okin Limos Tranquil Ease Lift Chair, Okin Electric Recliner BetaDrive Motors Sofa
Output: 29V 2A
Power cord: UK US EU AU Power Cord
Outlet: 2/3 prong
Size: 15X15X6 cm (L x W x H)
Packing: Brown box with pe bag and bubble bag; 49*39*34CM(L x W x H) for a master carton size
Delivery Date: Within 2-3 working days after confirming the payment
Test: Temperature test; Vibration test; Drop-Test; Overcharging and discharging test
Line Regulation: +/-5%
Load Regulation +/-5%
Model: 12V12A144W 4Pin LCD LED Lamp AC to DC Switching Power Supply
Output: 12V 12A
Power cord: UK US EU AU Power Cord
Outlet: 2/3 prong
Packing: Brown box with pe bag and bubble bag; 49*39*34CM(L x W x H) for a master carton size
Delivery Date: Within 2-3 working days after confirming the payment
Model: Ac Power Supply 24V 5A 120W 4Pin LCD LED Lamp
Output: 24V 5A
Power cord: UK US EU AU Power Cord
Outlet: 2/3 prong
Packing: Brown box with pe bag and bubble bag; 49*39*34CM(L x W x H) for a master carton size
Delivery Date: Within 2-3 working days after confirming the payment
Model: 24V 7A168W AC/DC Power Supply for LED switch all-in-one monitor 4 pin inside
Output: 24V 7A
Power cord: UK US EU AU Power Cord
Outlet: 2/3 prong
Packing: Brown box with pe bag and bubble bag; 49*39*34CM(L x W x H) for a master carton size
Delivery Date: Within 2-3 working days after confirming the payment
841 Embedded Normal Power Poe Pd Module(Pse Qd) Suppliers
Short on time? Let Embedded Normal Power Poe Pd Module(Pse Qd) sellers contact you.
