36/1000 HE UI
ELTEK Flatpack S rectifier 36/1000 HE UI 241122.235
INPUT DATA
Voltage (nominal) 185 - 400 VDC / 185 - 275 VAC
Voltage (operating range) 85 - 400 VDC / 85 - 305 VAC
Frequency DC, 16 2/3 Hz, 45 - 66 Hz
Current (maximum) 5.9 ADC / 5.9 ARMS
Protection Fuse in Positive & Negative, Reversed polarity insensitive, Shutdown above 420 VDC / 305 VAC
OUTPUT DATA
Voltage 40 VDC
Voltage (adjustable range) 331) - 45 VDC
Power (maximum) @ nominal input 1000 W / 450 W @16 2/3 Hz input
Power (maximum) @ 85 VDC / 85 VAC input 440 W / 440 W
Current (max cont.) @ nominal input 27.8 A (@VOUT < 36 VDC)
Hold up time, maximum output power >10ms; output voltage > 33 VDC
Current sharing (10 - 100% load) �±5% of maximum current from 10 to 100% load
Static Voltage regulation (10 - 100% load) �±0.5%
Dynamic Voltage regulation �±5.0% for 10-90% or 90-10% load variation, regulation time < 50ms
Ripple < 150 mVPP , 30 MHz bandwidth
Protection
ORing FET
Short circuit proof
High-temperature protection
Overvoltage Shutdown
Applications in these markets demand state-of-the-art, reliable, and safe DC power systems. Flatpack S delivers an industry-leading power density in its segment, many safety functions, a wide operating temperature range, and superb reliability in its small 217mm deep housing.
Used in the 3U rack with Smartpack S controller, the Flatpack S rectifiers cover 2 to 8kW applications using a minimum of space, less than 18 liters, and low heat dissipation.
Model Flatpack2 380/3000 HE (UI)
Part number 241119.825
INPUT DATA
Voltage (nominal) 176 - 277 VAC / 260 - 400 VDC1)
Voltage (range) 85 - 305 VAC / 260 - 410 VDC1)
Frequency 45 - 66 Hz / 15 - 18.5 Hz2) / DC1)
Current (maximum) @ nominal input, full load 18.2 ARMS
Power Factor > 0.99 at 50% load or more
Protection
Fuse in L & N
Varistor
Disconnect when VIN is out of range
OUTPUT DATA
Voltage (default) 381 VDC
Voltage (adjustable range) 300 - 400 VDC
# Pb cell supported 156 - 168 3)
Power continuous (maximum) 3000 W
Power @ 85 VAC / 85 VDC 1200 W
Current continuous (maximum) 9 A (@VOUT < 336 VDC) / 7.9 A (@ VOUT = 381 VDC)
Current sharing (10 - 100% load) ±5% of maximum current from 10 to 100% load
Static Voltage regulation (10 - 100% load) ±0.5%
Dynamic Voltage regulation ±2.0% for 10-90% or 90-10% load variation, regulation time < 10 ms 5)
Hold up time > 20 ms; output voltage > 300 VDC at 1500 W load
Ripple < 1000 mVP-P , 30 MHz bandwidth
Protection Overvoltage shutdown, Hot plug-in - Inrush current limiting, ORing diode, Fuse5), Short
circuit proof, High temperature protection, Overload shutdown4)
OTHER SPECIFICATIONS
Efficiency @ 230 VAC / 380VDC input 96.2% / 96.6%
Isolation 3.0 kVAC input to output, 1.5 kVAC input to earth, 1.5 kVDC output to earth,
3.0 kVAC CAN to primary, 3.0 kVAC CAN to secondary
Alarms (Red LED) Low mains shutdown, High and low temperature shutdown, Rectifier Failure, Overvoltage
shutdown on output, Fan failure, Low voltage alarm, CAN bus failure
Warnings (Yellow LED) Rectifier in power derate mode, Remote battery current limit activated, Input voltage out
of range, flashing at overvoltage
Normal (Green LED) Input and output ok
Acoustic noise, at nominal input and full load < 40dBA @Tambient< 25C / 40C
MTBF (Telcordia SR-232 Iss.3 Meth. II Case L1) 2 291 210h (@ Tambient = 25 C)
Operating temperature -40 to +75C (-40 to +167F), humidity 5 - 95% RH non-condensing
Output power de-rates linear from 3000W @ 50C (122F) to 980W @ 7C(167F)
Storage temperature -40 to +85C (-40 to +185F), humidity 0 - 99% RH non-condensing
Dimensions[WxHxD] / Weight 109 x 41.5 x 327 mm (4.25 x 1.69 x 13) / < 1.95 kg (4.3 lbs)
DESIGN STANDARDS
Electrical safety EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013, IEC 60950-1:2013, UL
60950-1:2014, CSA C22.2 No. 60950-1-07
EMC EN 61000-6-1:2007, -6-2:2005, -6-3:2007 + A1:2010, -6-4:2007 + A1:2010,
IEC61000-6-5: 2015, EN 300 386:v1.6.1, FCC CFR 47 Part 15:2013
Environment
Tested according to: ETSI EN 300 019: 2-1 (Class 1.2) & 2-2 (Class 2.3)
Normal operating conditions as per IEC 62040-5-3:2016 clause 4.2. Other operating
conditions as per IEC 62040-5-3:2016 clause 4.3, must be advised
2011/65/EU (RoHS) & 2012/19/EU (WEEE)
24V 1000W Rectifier Module Eltek Flatpack S 24/1000 HE 241122.205
Eltek 241122.205 Profile
Ã?Â
The combination of innovative design, efficiency and reliability makes the Flatpack S a perfect choice for telecom and industrial applications. With a system depth of only 250mm the Flatpack S systems will fit in most cabinets.
This Flatpack S reduces losses by 30% compared to the current industry standard. The result is reduced total cost of ownership for the customers as well as contribution to reducing the global carbon emissions.
Key Features
Small
Short
Power dense, 26 W/inch3
High efficiency
OR-ing protection on output
Hot pluggable
Voltage keying
Description
Compact and reliable rectifier for rail and power utilities applications
Used in the 3U rack with Smartpack S controller, the Flatpack S rectifiers cover 2 to 8kW applications using a minimum of space, less than 18 liters, and low heat dissipation.
Applications in these markets demand state of the art, reliable and safe DC power systems. Flatpack S delivers an industry leading power density in its segment, many safety functions, wide operating temperature range and superb reliability in its small 217mm deep housing.
Specifications
Input
Voltage AC (operating range) 85 - 305 VAC
Voltage DC (operating range) 85 - 300 VDC
DC Output
Max Power 1000 W
Voltage (adjustable range) 41,7 - 21,5 VDC
Current (maximum) 28 ADC
Max voltage 21,5 VDC
Other
Cooling Single fan
Efficiency 92,5 %
Operating temperature -40 - 85 �°C
Dimensions
Dimensions WxHxD (mm) 72 x 41,5 x 217 mm
Dimensions WxHxD (inch) 2,83 x 1,63 x 8,54 "
Weight 0,85 lbs
Design Standards
Ingress Protection (IP) 20
Certifications
Marine DNV 2.4 Valid for part no. 241122.205M
241122.125 48/1800 HE Eltek Flatpack S 48V 1800W Rectifiers
Description
Compact HE rectifiers for small to medium telecom applications
The Flatpack S rectifiers incorporate Telecom specifications, high efficiency, ORing protection on output and high power in a small, 217 mm deep box.
Used in the 1U high, 2 or 3 rectifier positions power rack with Smartpack S controller and battery and load distributions, the Flatpack S rectifiers cover 2 to 5.4kW applications using a minimum of space, less than 6 liters, and low heat dissipation.
Applications
TELECOM â?? MOBILE / WIRELESS
Radio base stations/ cell sites
Lte / 4g / wimax
Distributed antenna systems
Microwave
Broadband
TELECOM - FIXED
Telephony servers / switches
Fiber optics / FTTx
Microwave
Cable
BROADBAND
Features
Small
Short
Power Density - 47 w/Inch 3
High Efficiency
Oring Protection On Output
Hot Pluggable
Voltage And Power Keying
Specifications
Model 48/1800 HE
Part number 241122.125
INPUT DATA
Voltage (nominal) 195 - 277 VAC / 195 - 250 VDC 1)
Voltage (operating range) 85 - 305 VAC / 85 - 250 VDC 1)
Current (maximum) @ nominal input, full load 9.9 ARMS
Frequency 45 - 66 Hz / 0 Hz1)
Power Factor > 0.99 at 50% load or more
Protection Fuse in L & N, Varistor, Shutdown when input voltage is out of operating range
ELTEK FLATPACK S 2U HIGH-EFFICIENCY DC POWER SYSTEM
The Eltek Flatpack S 2U system is a high-efficiency power solution with an optimal footprint for up to 200A applications where space is limited â?? both in racks and various cabinet installations.
The Flatpack S 2U is a two rack-unit high system that delivers 24V and 48V DC power to telecom infrastructure that includes: 4G/LTE, FTTX, distributed antenna systems (DAS), microwave broadband, cable broadband, telephony servers and switches, and fiber-optics.
RECTIFIER PART NUMBERS (SOLD SEPARATELY)
241122.105.VC Flatpack S 48/1000 HE with CLEI
241122.125.VC Flatpack S 48/1800 HE with CLEI
241122.205 Flatpack S 24/1000 HE
241122.930 Flatpack S Blind Panel
Flatpack2 380/3000 HE UI 380V Rectifier 241119.825
HE rectifier for 380VDC in data centers
The Flatpack2 380/3000 HE UI rectifier has high efficiency, ORing protection on output, and high output power.
Distribute pure battery backup DC voltage with a minimum of loss. Remove the low reliable DC-AC step in the central backup power system and maximize its reliability and efficiency.
Stack cabinets with up to 72 rectifiers to build large power systems monitored by the Smartpack2 controller.
The rectifier's Universal Input also allows it to be powered from the 380Vdc bus. Static voltage outputs (300-400Vdc) can be realized for 400Vdc remote powering and other applications.
ELTEK FLATPACK2 48V/3000W HE Rectifier Module 241119.903
INPUT DATA
Voltage (nominal) 176 - 275 VAC
Voltage (operating range) 85 - 300 VAC
Frequency 45 - 66 Hz
Current (maximum) 19 ARMS
Power Factor > 0.99 at 50-100% load
Protection Fuse in L & N, Varistor, Shutdown above 300 VAC
OUTPUT DATA
Voltage (default) 53.5 VDC
Voltage (adjustable range) 43.2 - 57.6 VDC
Power @ 230 VAC 3000 W
Power @ 85 VAC 1380 W
Current 62.5 A (@ 48 VDC)
Current sharing (10 - 100% load) �±5% of maximum current from 10 to 100% load
Static Voltage regulation (10 - 100% load) �±0.5%
Dynamic Voltage regulation �±5.0% for 10-90% or 90-10% load variation, regulation time < 50ms
Hold up time, 1500 W / 3000 W output power >20ms / >10ms ; output voltage > 43 VDC
Ripple < 150 mV peak to peak, 30 MHz bandwidth
Protection
Fuse, Short circuit proof, High temperature protection, Overvoltage shutdown,
Hot plug-in inrush current limiting
100% COTTON , 65:35 POLY COT , 50:50 LINEN /COT , SATIN , FANCY SILK
20 X 20 'S , 2/20 X 10 , 20'S X 30'S , 30'S X 30'S , 2/30 X 10'S
Yarn dyed woven in scintillating checks and stripes patterns , PRINTS
AZO free dyes , 4-5 grade colour fastnes to 40 degree
SHAPES - RECTANGULAR , SQUARE WITH TUSSLE DROPPINGS
SIZE WIDTH : 30 , 36 , 38 CM LENGTH 90 TO 300 CM
WEIGHT 240 GRAMS TO 1000 GRAMS
each piece in a poly bag , header card and hangs
72 TO 120 PCS PER CARTON
Sample development in 20 days
Bulk shipment 45 to 60 days depending on the order volume
2000 pieces
300000 pcs per month
Home Dinning , Barbecue , out door , beach, Hotel and Restaurants
30% by advance TT or LC balance at the time of shipment
Selenium Rectifier
The H and W series are the result of continuous research and development programme aimed at reliable, low-cost, compact selenium rectifier elements and stacks. High standard of quality are further insured by Westing house plants & machinery and the expert technical know-how available at Insel Rectifiers.
The aluminium based selenium rectifier elements are manufactured by an improved, closely controlled vaccum deposition process. This new process ensure stable, non- ageing, low loss characteristics permitting higher current density operation while maintaining a reliability standard which has been a by in the selenium rectifier field for over thirty years.
IRI selenium rectifier â??s elements are available in two categories, series H & w. Both series are available in Voltage grades up to 36 volts.
Rectifiers with 4 or less than 4 plates shall be screw / bolt mounted
Setting the Standard in Selenium Rectifier
ManufacturingInsel Rectifiers takes pride in its unwavering commitment to excellence as a leading Selenium Rectifier manufacturer. Renowned for crafting precision-engineered components, we stand at the forefront of the industry, setting benchmarks for quality and reliability in Selenium Rectifiers and Selenium Bridge Rectifiers.
Precision in Selenium Rectifier Manufacturing
At Insel Rectifiers, we specialize in the art of Selenium Rectifier manufacturing. Our commitment to precision engineering ensures that every Selenium Rectifier and Selenium Bridge Rectifier we produce adheres to the highest industry standards. These components play a pivotal role in converting alternating current (AC) into direct current (DC) with optimal efficiency.
Crafting Excellence: Selenium Rectifiers by Insel Retifiers
As a distinguished Selenium Rectifier manufacturer, we understand the critical role these components play in various applications. Insel Rectifiers excels in crafting Selenium Rectifiers that go beyond functionality; they embody precision, durability, and reliability. Our commitment to excellence is reflected in every product, setting a standard that our competitors strive to match.
Selenium Bridge Rectifiers: Elevating Efficiency
Insel Rectifiers extends its expertise to Selenium Bridge Rectifiers, contributing to seamless power conversion. These rectifiers play a vital role in diverse applications, ensuring the smooth and efficient transformation of AC to DC. With Insel, experience the efficiency and reliability of Selenium Bridge Rectifiers designed for optimal performance.
Your Trusted Selenium Rectifier Supplier
Insel Rectifiers is not just a manufacturer; we are your trusted partner as a Selenium Rectifier supplier. Our commitment extends beyond crafting exceptional components to providing reliable solutions tailored to meet your specific requirements. As your dedicated supplier, we prioritize customer satisfaction, ensuring prompt and efficient service.
