Find Verified Electro Hydraulic Forging Hammer Suppliers, Manufacturers and Wholesalers

The hydraulic forging hammer is a new energy saving and environmental protection forging hammer. It can save more than 90% energy comparing with the steam forging hammers and the forging hammers with compressor. --roger(at)chinesehammers(dot)com---

The pressure of compressed Nitrogen is constant, and the hammer is operated just by controling the hydraulic system. When you feed blanks, the hydraulic pressure will lift the hammer head. When you hit the blank, the hydraulic pressure will unload fastly and the pressure of compressed Nitrogen and the gravity will drive the hammer head to hit the blank at a very high speed.

The hydraulic forging hammer can promote the efficiency and production with good quality. The hammer has safety locking motion so that working is safe and convenient. As further, It can improve the working condition, which is environmental and good for workers.

The advantage, structure and design feature of hydraulic forging hammers is as follows,
1;Energy conservation and environmental protection.
2;The operation is convenience,lowering and the act is agility
3;System work safety,it has fully safety locking motion
4;Special structure is more fair and more safety.





wooden case.

Electro hydraulic forging hammer
The electro hydraulic forging hammer model: 1t, 2t, 3t, 5t

wooden case

Forging hammer

Applications :
This pneumatic forging hammer is widely used for general forging works, such as drawing-out, upsetting, punching, chiseling, forge, welding, bending and twisting. It is also used for forge in bolster dies.

Features:
+ ready operation: economic and convenient
+ easy to operate, by manipulating the hand lever or foot-pedal, all operating functionsí¬idle run, top setting, pressing down, single blow, light or full series blow can be obtained as desired
+ a special oil-pump is provided for lubricating the cylinders. Prior to running, turn the hand-crank of the pump to get the cylinders being lubricated beforehand.

The main technical parameter :



Wooden case

PLC Full Hydraulic Die Forging Hammer widely used in Precision Forgings of automobile industry, hardwares and
tool, surgical instruments, spaceflight industry forgings and tableware such as Connecting Rods, Fork Gear Shifts,
Rocker, Steering Knuckle, Wrench, Pliers, Spanner... Etc all kinds forgings.

CNC Fully Hydraulic Die Hammer is a high technology die forging hammer, Programmable Hitting, High Production Efficiency, Precision Forgings, Energy Saving, Environmental Protection and Reliable Performance are its features. We Produce and Export CNC Hydraulic Drop Forging Hammer, Hitting capacity vary from at 16kj, 25kj, 31.5kj, 50kj, 63kj, 80kj, 100kj, 125kj best suitable for precision forging, multi-molds forgings and abnormal forgings. Should any capacity CNC Hydraulic Drop Forging Hammer be of interest to you, please let us know. We will be happy to give you a quotation upon receipt of your detailed requirements. Yours truly Kevin Liu Lead Name : Hydraulic Die Forging Hammer.

The pneumatic forging hammer is widely used for general forging works like free or open die forging, such as drawing-out, upsetting, punching, chiseling, forge, welding, bending and twisting. Pneumatic forging hammer is also used for forge in bolster dies. And pneumatic forging hammer is also the favorite tool to do wrought iron art works. As further, our pneumatic forging hammer has passed ISO and CE certifications.--roger(at)chinesehammers(dot)com---

The main features of pneumatic forging hammer are as follows:
1. Ready operation: economic and convenient
2. Easy to operate, by manipulating the hand lever or foot-pedal, all operating functions-idle run, top setting, pressing down, single blow, light or full series blow can be obtained as desired
3.A special oil-pump is provided for lubricating the cylinders. Prior to running, turn the hand-crank of the pump to get the cylinders being lubricated beforehand.

The forging hammers
C41-15 kg, 25 kg, 40 kg, 75 kg, 150 kg, 250 kg, 400 kg, 560 kg, 750 kg, 1000 kg

Wooden case

Our ring rolling machines are the most excellent equipments for processing seamless ring forgings such as: bearing ring, gear ring, rim, turning support, flange and high temperature alloy for aviation. --roger(at)chinesehammers(dot)com---

The ring rolling machines are most extensively used in bearings and gears manufacturing, and also used in precise flange rings manufaturering for chemical engineering piping. They have the advantages of good dimensional precision, good circularity and economy of material. Bearing collars of different kinds, both internal and external are reamed to shape. The rollway and retaining edges on the collars are also reamed into shape at the same time.

The ring rolling machines can roll rings automatically. Only to set the dimensions of ring, semifinished ring, roll and material specification, then the ring rolling machines can roll the ring and stop automatically. So it's very effective to promote your condition with high efficiency.

The ring rolling machines are necessary and very suitable to manufacture seamless ring forgings, bearing rings, bearing sleeve rings, groove support wheel forgings, gear rings, rim, turning support, flange forgings and high temperature alloy rings for aviation. And our ring rolling machines are widely used by industrial manufaturers all over the world, where they meet with customer's acclaim.

You will rest assured of its economic benefits and upgrading of your forging pressing technology once you have ring rolling machines. So i know the ring rolling machines will promote your business greatly. If you like, please visit our website and feel free to contact me. I'll write you back soon to what you're concerning with our best quotation. We are always glad to serve you.

Metal scrap hydraulic briquette press
Y83-160A
Y83-230
Y83-300
YA83-300

Wooden case

Our Y81 series hydraulic metal baling presses are drived by fully hydraulic power. This baling presses are mainly used in compressing the scattered plastic black and non-ferrous metal plates. It is very convenient for transportation and smelting. The baling presses adopted the electro hydraulic driver. They can be operated in both manual and automatic control modes. The operation is convenient and the performance is reliable. The mode of baling is side push. The baling block can be transported directly, so it will omit the porterage.--rogerweimail(at)sina(dot)com---

The technical features are as below:
1.the density of baling block is 2 T/M according to the requirement in third grade in conformity with GB4223-84 recycle Carbon Scrap Steel Category&Technique Terms.
2.the hydraulic station adopted the entirety type valve block, and its volume is small, and realize the partial non-pipe design, and it decrease the leakage.
3.the control valve adopted lishile series valves, changeover is stable and flexible, and noise is low.
4.optimizing the system design, assuring the oil temperature is not less than 55
5.the machine is driven by hydraulic system, and the electric system is automatically controlled by PLC.Controling is stable and modification is convenient.
6.the machine can be laid in the flattening concrete floor, and it needn't be made the foundation.
7.The discharge mode includes turn bag, push bag, fore push bag.

The T31 series forging manipulators include: straight moving type, turning around type, moving around type etc many moving types whale hydraulic press and mechanic-hydraulic mixed type, whole mechanism type etc many driving types. It can satisfy different requirements of customers. roger(at)chinesehammers(dot)com---

The forging manipulators can finish five kinds of motions: the vehicle walks freely on the tramroad, the frame of clamp can move ahead back, lift and drop, incline, turn around. The head of clamp can clamp, loose, rotate. The whole manipulator adopts whole frame structure, drived by motors and making wheels move freely; the link rod drived by oil cylinder or motor or steel wire wheel makes clamp life and drop and incline smoothly: the mouth of clamp fastens and looses completed by pulling rod drived by oil cylinder; the hollow axis makes the head of clamp rotate which is drived by hydraulic motor; the whole frame turns around which is drived by hydraulic motor; the frame of clamp is equipped with level and vertical butters. The speed of rotating part is controlled by hydraulic oil, and the rotating part is also with equipment to prevent surcharger.



Wooden case.

C41-150 Forging Hammer
Weight of falling parts:150 kg
Max hit energy: 2.5kj
Hit number: 180 per minute
Height of working area: 370 mm
Tup axis to frame front: 350 mm
Dimension of top die surface(L x W): 200 x 85 mm
Dimension of bottom die surface(L x W): 200 x 85 mm
Max forged square stock: 130 x 130mm
Max forged round stock: 145 mm
Motor Type: Y180M-4-B3 Power: 18.5 kw
Weight of Hammer 3260 kg
Weight of Anvil block: 1500 kg
Machine Outside Size: 2390 x 1085 x 2150mm.

C41-250 Forging Hammer
Weight of falling parts:250kg
Max hit energy: 5.6kj
Hit number: 140 per minute
Height of working area:450mm
Tup axis to frame front: 420mm
Dimension of top die surface(L x W):220 x 100mm
Dimension of bottom die surface(L x W): 220 x 100mm
Max forged square stock: 145 x 145mm
Max forged round stock: 175mm
Motor Power: 22kw
Weight of Hammer: 5000kg
Weight of Anvil block: 2500kg
Outside Size: 2639 x 1155 x 2540mmPrimary Competitive Advantages :
C41-560 Forging Hammer
Weight of falling parts: 560 kg
Max hit energy: 13.7 kj
Hit number: 115 per minute
Height of working area: 600 mm
Tup axis to frame front: 550 mm
Dimension of top die surface(L x W): 300 x 140 mm
Dimension of bottom die surface(L x W): 300 x 140 mm
Max forged square stock: 270 x 270mm
Max forged round stock: 280 mm
Motor Power: 45 kw
Weight of Hammer: 9800 kg
Weight of Anvil block: 6720 kg
Outside Size: 3464 x 1500 x 3157mm

C41-750 Forging Hammer

Weight of falling parts: 750kg
Max hit energy: 19kj
Hit number: 105 per minute
Height of working area: 670mm
Tup axis to frame front: 750mm
Dimension of top die surface(L x W): 330 x 160mm
Dimension of bottom die surface(L x W): 330 x 160mm
Max forged square stock: 270 x 270mm
Max forged round stock: 300mm
Motor Power: 55kw
Weight of Hammer: 17,000kg
Weight of Anvil block: 9,000kg
Outside Size: 3905 x 1370 x 3175mmSafety/Quality Approvals :
C41-1000 Forging Hammer

Weight of falling parts: 1000kg
Max hit energy: 27kj
Hit number: 95 per minute
Height of working area: 800 mm
Tup axis to frame front: 770 mm
Dimension of top die surface(L x W): 365 x 180 mm
Dimension of bottom die surface(L x W):365 x 180 mm
Max forged square stock: 290 x 290mm
Max forged round stock: 320mm
Motor Power: 75kw
Weight of Hammer: 20,000 kg
Weight of Anvil block: 13,000 kg
Outside Size: 4125 x 1500 x 3770mmTrade Information :

C41-2000 Forging Hammer

Weight of falling parts: 2000 kg
Max hit energy: 54 kj
Hit number: 80 per minute
Height of working area: 1000 mm
Tup axis to frame front: 950 mm
Dimension of top die surface(L x W): 400 x 300 mm
Dimension of bottom die surface(L x W): 400 x 300 mm
Max forged square stock: 350 x 350mm
Max forged round stock: 400mm
Motor Type:Y315L2-6-B3
Power: 132 kw
Weight Hammer: 48000 kg
Anvil block: 24000 kg
Outside Size: 4200 x 2300 x 4390mm.

KHODIYAR INDUSTRIA PVT LTD is an ISO-9001:2015 certified Hot Forging & Machined Components manufacturing facility produce all grades of Brass, Copper & Alloys, Aluminium & Alloys, Carbon Steels, Alloy Steels & Stainless Steel in the weight range of 50 GMS to 35KG as a single part to suit your production requirements.
We were established in 2014 & produce Forged & Machined components for OEMs in Heavy Engineering, Pump, Valve, Wind turbine, Automotive, Electrical, Aerospace Industry, Oil, Power & Gas, Material Handling, Construction & Mining Equipments, Defense etc., to list a few applications.
Our Forge shop includes :

a. 100 MT Screw Press Product weight:0.050 0.500 Kgs. + Equivalent Trimming Press (40 MT)

b. 200 MT Screw Press Product Weight: 0.100 Kg to 2.000 Kgs. + Equivalent Trimming Press (75 MT)

(Non-Ferrous 4 Kg.)
c. 300 MT Screw Press Product Weight: 0.100 Kg to 3.000 Kgs. + Equivalent Trimming Press (100 MT)
(Non-Ferrous- 5 Kgs.)

d. 1 Ton Drop Hammer & 2 Drop Hammer

e. Furnace : Oil, Electric, Gas & Coal.
MACHINE SHOP
1. Vertical Machining center - BFW ( 800*550*500 MM ) BED SIZE with 4th axis

2. Vertical Machining center - HAAS make ( 800*550*500 MM ) BED SIZE with 4th axis
&

3. Turning centers - up to 350 MM DIA. Jobs can be turned

Hydraulic Pay Off Stand

We are supplier and exporter of Hydraulic Oil.

Our product is a high quality product made from imported oils and additives of best quality. It has a very good life and will give the best performance under the most critical conditions. It is available in 210 ltrs. Hdpe drum/ 26 ltrs. And 50 ltrs.

Multi-brand Hydraulic Oils ISO VG 15, 32, 46, 68 and 100. Available in Drums, pails, IBCc, Bulk.

It is an energy saving products, can be used instead of steam hammers.We have variety of open die forging hammers and close die forging hammers.The capacity is from 1 ton to 16 ton.

Features:
1. Program control, numerical input, simple operate;
2. Advanced taper valve control, fast response, not easy to inner leakage;
3. Digitized and exacted controlling striking energy, avoid surplus energy during striking;
4.Swaying combine oil cylinder and thin piston rod flexible design
Application:
It has been widely used in hand tools, electric power fittings,medical devices, constuction machinery ,auto parts and many other industries.
Our forging hammer has been exported to Russia, USA,Germany,Thailand,India,Turkey,Denmark,Taiwan,Vietnam ect.