1. Completely submersible liquid level transmitter
2. Wide variety of sensors, e.g. extension tube or flexible cable, standard or high temperature
3. Measuring range up to 328ft (100m)
4. 4-20mA output, 2-wire loop powered
5. Pressure transducer also available
The ec series is a hydrostatic pressure level transmitter for measuring the level of liquids in various tanks and other types of vessels. The ec hydrostatic pressure level transmitter consists of a piezoresistive sensor and wheatstone bridge to directly measure head pressure exerted on the diaphragm of the ec level transmitter. When the pressure is exerted on the diaphragm, as a result of the liquid level, the pressure is transferred to the wheatstone bridge electrical circuit through silicon oil contained in the ec sensing unit. This creates a differential voltage, which is then amplified to create a variable 4-20ma output that varies as a result of the changing liquid level. In addition, a pressure transducer is available for measuring pressure in tanks or pipes and producing a variable 4-20ma output.
Application:
Use
1.Extension cable unit can measure in deep wells or reservoirs
2.Tank level measurement and control
3.Plc or dcs input for level control functions
4.Pressure measurement of gas or liquid (ec1500)
Industry
1.Water treatment and distribution
2.Chemical
3.Many others
overview
The diaphragm of the differential pressure level transmitter is used to prevent the medium in the pipeline from directly entering the pressure sensor component of the differential pressure transmitter. It uses a filling fluid such as silicone oil to transmit pressure between the transmitters.
The HR3051-LT differential pressure level transmitter be used for measuring the level, density, pressure, and flow of a liquid, gas, or vapor and converts it into a 4-20 ma DC HART current signal output. The RP2001 can also communicate with the RST375 handheld te
rminal or the RSM100 Modem for parameter setting, process monitoring, and more. The measuring range of the HR3051-LT differential pressure level transmitter (when not moved) is 0-1kPa~2MPa, and the rated pressure of the liquid level flange is: 1.6/4MPa, 6.4MPa, 10MPa, 150psi, 300psi or 600psi.
Working principle and structure
The HR3051-LT differential pressure level transmitter consists of a HR3051-DP differential pressure transmitter and a soldered liquid level flange. Its working principle is the same as HR3051-DP type differential pressure transmitter (see HR3051-DP type differential pressure transmitter technical specification), except that the pressure transmission path on the positive pressure side is slightly different: the pressure acting on the high pressure side is firstly The diaphragm and filling liquid on the liquid level flange pass through the transmitter body and finally reach the high voltage side of the measuring sensor.
Comparison of range code and range limits
Range code Minimum range Maximum range Rated pressure (maximum)
B 1kPa 6kPa Rated pressure of the liquid level flange
Food, Feed & Pharma Grades
- Various particle sizes (very coarse to very fine).
- • Various hydration rates (very slow to very fast).
- • Various viscosities (1% solution in water = 50 cps to 7000 cps).
- • Special deodourised grades.
- • Special low microbiological count grades.
Technical Grades
Straight Guars:
- Various particle sizes (very coarse to very fine).
- Various hydration rates (very slow to very fast).
- Various viscosities (1% solution in water = 50 cps to 8000 cps).
- Special good Dry-Flow (Free-Flow) Guars.
- Special Anti-Dusted Guars.
Modified Guars and Guar Derivatives:
- Fast hydrating / High Viscosity / Diesel Slurriable (particularly suitable for oil, gas and other deep well drilling and EOR operations like polymer flooding / fracturing),
- Borated.
- Reticulated.
- Oxidised.
- Depolymerised.
- High water absorbance capacity.
- Carboxymethyl (Anionic).
- Hydroxypropyl (Nonionic).
- Hydroxypropyltrimethyl chloride (Cationic).
- Hydroxypropyltrimethyl chloride Hydroxypropyl (Cationic, double derivative).
- Special good Dry-Flow (Free-Flow) Modified Guars / Guar Derivatives.
- Special Anti-Dusted Modified Guars / Guar Derivatives.
Guar gum is a fiber from the seed of the guar plant.
Guar gum is used as a laxative. It is also used for treating diarrhea, irritable bowel syndrome (IBS), obesity, and diabetes; for reducing cholesterol; and for preventing “hardening of the arteries” (atherosclerosis).
In foods and beverages, guar gum is used as a thickening, stabilizing, suspending, and binding agent.
In manufacturing, guar gum is used as a binding agent in tablets, and as a thickening agent in lotions and creams.
How does it work?
Guar gum is a fiber that normalizes the moisture content of the stool, absorbing excess liquid in diarrhea, and softening the stool in constipation. It also might help decrease the amount of cholesterol and glucose that is absorbed in the stomach and intestines.
There is some interest in using guar gum for weight loss because it expands in the intestine, causing a sense of fullness. This may decrease appetite.
USES:
Diarrhea. Adding guar gum to the tube feeding formula given to critical care patients may shorten episodes of diarrhea from about 30 days to about 8 days.
High cholesterol. Taking guar gum seems to lower cholesterol levels in people with high cholesterol. Guar gum and pectin, taken with small amounts of insoluble fiber, also lower total and “bad” low-density lipoprotein (LDL) cholesterol, but don't affect “good” high-density lipoprotein (HDL) cholesterol or other blood fats called triglycerides.
Diabetes. Taking guar gum with meals seems to lower blood sugar after meals in people with diabetes. By slowing stomach emptying, guar gum may also lessen after-meal drops in blood pressure that occur frequently in people with diabetes.
Constipation.
Irritable bowel syndrome (IBS).
Contains Real Almond bits- High in Nutrients Foodix Badam Mix contains rich values of DHA- Docosahexaenoic acid a type of omega-3 fat that can lower the risk of heart disease, and has a low glycemic index which causes a lower and slower rise in blood glucose.
Made fresh for you once you place your order online. Because we believe in the need for 'Fresh' & 'Pure' foods for maximum nutrition absorption. Rich source of Protein & Iron- The health benefits include lower blood sugar levels, reduced blood pressure, and lower cholesterol levels. They can also reduce hunger and promote weight loss.
Badam Can Lower Cholesterol Levels. High levels of LDL lipoproteins in your blood also known as bad cholesterol are a well-known risk factor for heart disease. Your diet can have major effects on LDL levels. Some studies have shown Badam to effectively lower LDL.
NOT JUST YOUR USUAL MIX - REAL INSTANT- Badam mix is an instant almond drink that can be used with cold & hot milk. A perfect combination of nutrition and health. You can make badam halwa with this mix too.
No Added Flavors or Artificial Flavors- Foodix badam mix has the goodness of real badam with great taste and is truly an energizing drink. It is rich and thick with a naturally creamy consistency. Naturally good and identical flavors of Almond to enhance the taste.
7989 Ec Series Pressure Level Transmitter Suppliers
Short on time? Let Ec Series Pressure Level Transmitter sellers contact you.
Intek Instruments is engaged in offering a wide gamut of high quality Pressure Transmitter / Transducer.
1. Brand:- Gefran Italy
2. Series:- KS Series
3. Pressure Range:- from 1 Bar to 1000 Bar
4. Output Voltage:- 0-10 VDC or 4-20 mA
5. Wetted Parts:- Stainless Steel
6. Accuracy:- < ± 0.5% FS
7. Response Time:- < 1 msec.
8. Application:- Suitable for all industrial applications, especially, on hydraulic (presses, pumps, power pack, fluid power, etc.) with severe conditions usually with high level of shock, vibration, and pressure and temperature peaks.
----VIETNAM COCO PEAT MOSS---
Coconut peat is a multi-purpose development medium made from coconut husks. Coir shells are pre-washed, machine dried, sifted and free from sand and other contaminants such as animal and plant residues. Coconut peat is a very good alternative to traditional peat moss. The air is filled with porosity and high water holding capacity, making it an ideal growth medium for plants. It is 100% organic and environmentally friendly, free of pathogens and weeds. It has a pH of 5.8 - 6.8, EC level <1 mS / cm is ideal for plant growth.
Green coffee refers to the raw beans of the coffee plant. Its extract was popularized as a weight loss supplement, and it may promote healthy blood sugar and blood pressure levels, though research on its effectiveness is limited.
HR310 Series Digital Pressure Transmitter
1.overview
HR310 series digital pressure transmitter is one of excellent products in our company, Which use advanced and mixed signal processing technology and unique compensation methods to realize high precision digital pressure measurement, Full scale digital linear calibration, full temperature digital compensation, compensation parameter stored in nonvolatile memory, multiple safety protection system to avoid the products cannot be used due to calibrate parameter lost; part of Circuits have power and watchdog monitor, mechanical part with full seal stainless steel structure, both of them remarkably improve the reliability of transmitter. The high precision digital pressure transmitter is widely and successfully used in many industries, such as pressure measurement in industrial process, hydrology and water conservancy, and geological prospecting etc.
2. Features
High stable pressure sensing unit, with long-term stability
High precision, up to 0.05ï¼?F.S(Linearity, repeatability, hysteresis);
Adopts mixed signal microprocessor and Higher order fitting algorithm to realize high precision compensation
Standard RS485 MODBUS-RTU Protocol, can be used in DCS or PLC system
Low power consumption, when operating at full scale then the power consumptions about 4mA, outstanding advantage when use outside battery supply
Anti-surge, electromagnetic interference
CR-606 fuel level transmitter (sensor) working principle
The sensing part of the CR-606 series capacitive fuel level sensor is a coaxial container. When the fuel enters the container, the capacitance changes between the sensor housing and the sensing electrode. This change is converted by the circuit and is accurate. Linear and temperature compensated, output 4-20mA standard signal is supplied to the display instrument.
CR-606 fuel level transmitter (sensor) for occasions
CR-6062 compact fuel level transmitter (sensor) industrial grade, suitable for 5MPA or below, temperature below 200, viscosity is not high fuel measurement, can be added with various protocols of communication
CR-6061 automotive-specific fuel level transmitter (sensor) is suitable for the measurement of various fuel under normal temperature and pressure. The output damping time is adjustable from 30 to 180s. It can be equipped with 485 communication.
CR-6062 standard fuel level transmitter (sensor) industrial grade, suitable for measurement below 5MPA, viscous fuel quality below 200, can be added with various protocol communication
CR-6063 high temperature and high pressure type fuel level transmitter (sensor) industrial grade, suitable for below 32MPA, temperature measurement below 250, can be attached to various protocols
CR-6061 universal fuel level transmitter (sensor) is suitable for measuring various fuel and hydraulic fuel under normal temperature and pressure, and can be equipped with 485 communication.
CR-605 series universal liquid level gauge is suitable for measurement of sewage, oil (sheathed tube), high viscosity, easy to crystallize, easy to adhere, changeable medium , foam or aerosol impact and other diffcult to measure situation. The whole machine does not have any movable or elastic parts with advantages of impact resistance, convenient installation, high reliability, high precision and good cost performance. It can replace the RF admittance, radar, ultrasonic, magnetostrictive and other level gauges to make accurate measurements.
The core components use advanced RF capacitance sensing circuit to convert to standard electric signal after precision temperature compensate and linear correction through inner processor. The product uses tomography technology to automatically detect the dielectric constant and temperature changes of the medium, automatically calibrate, and automatically adapt to the measured medium. In any case, you can adapt to different measurement requirements in complex locations without recalibration. And it has excellent resistance to hanging materials, anti-condensation, anti-bubble and other super adaptability. The products own protection rating is IP68, which enables long-term stable measurement in harsh environments.
CR-605 series universal liquid level gauge is suitable for measurement of sewage, oil (sheathed tube), high viscosity, easy to crystallize, easy to adhere, changeable medium , foam or aerosol impact and other difficult to measure situation.The whole machine does not have any movable or elastic parts with advantages of impact resistance, convenient installation, high reliability, high precision and good cost performance.It can replace the RF admittance, radar, ultrasonic, magnetostrictive and other level gauges to make accurate measurements.
The core components use advanced RF capacitance sensing circuit to convert to standard electric signal after precision temperature compensate and linear correction through inner processor.The product uses tomography technology to automatically detect the dielectric constant and temperature changes of the medium, automatically calibrate, and automatically adapt to the measured medium.In any case, you can adapt to different measurement requirements in complex locations without recalibration.And it has excellent resistance to hanging materials, anti-condensation, anti-bubble and other super adaptability.The product's own protection rating is IP68, which enables long-term stable measurement in harsh environments.
The product complies with GB3836.4-2010 and GB3638.1-2010
The series 610 low differential pressure transmitters are capable of measuring the pressures and flow of air or non-conducting gases at high resolutions. Designed specifically for clean rooms, isolation rooms, and other critical environments, the series 610 uses an improved all stainless steel micro-tig welded sensor to detect differential pressure and convertthis pressure into a linear dc electrical signal by a unique electrical circuit. This unit is ideal for situations when accurate and reliable pressure monitoring is essential. Easy access pressure ports and electrical connections, removable process heads, and detachable terminal blocks make for fast and easy installation.
The series 610 transmitters are available for air pressure ranges as low as 0.1 in w.C.Full-scale.
TECHNICAL DATASHEET
EcoTexTM -SL55 - PVA FREE ONE-SHOT PRODUCT
DESCRIPTION Powder types unique one-shot product which needs no extra native starch, modified starch, binder, softener, lubricant to be added further. It is mainly used for Shuttle-less loom woven warp yarns counting above the 40s to 60�¢??s Cotton.
Products are made from grafted starch, anionic polymers, and synthetic fatty matters. It contains a maximum of 13% moisture and an optimized viscosity level. Easily disperse in cold water with little swelling property due to high binding property.
SPECIFICATIONS
1.Appearance - Off white powder
2.pH value of 7% solution - 5 to 7
3.Solubility - Partially soluble in cold water
4.Viscosity of size mix - 4 to 5 sec (SITRA -6mm cup)
5.Total Moisture - Max 13%
6.Bulk density - 0.5 to 0.6 g/ml
7.Total ash - Max4%
COOKING METHOD
1. Fill the required quantity of water in a cooker
2. Gradually add EcoTexTM-SL55 and min for 2 min.
3. Close the pressure cooker lid.
4. Open the steam value and cook to @ 120�? �ºC or 35psi.
5. Retain in the cooker for 15 to 20 minutes.
6. Then transfer the size mix to storage.
PROPERTIES
1. Moisture regain:
The formation of thin flexible film absorbs water molecules from atmospheric air that maintains the required moisture content of the sized yarn. This property improves the weaving efficiency by reducing the warp stops.
2. Film property:
The very thin strong film gives the inter fiber penetration that improves yarn tensile strength. Optimum elongation and flexible property significantly reduce warp break by overcoming the applied tension during weaving.
3. Abrasion resistance:
The strong film withstands the mechanical friction between yarn to yarn and yarn to machine parts like reed, dropper pin, heald wire, weft picking element.
DE-SIZING
Easily de-sizable product with hot alkali treatment.
STORAGE
Keep away from direct sunlight and store in a cool, dry, and well-ventilated place.
STABILITY
Stable for one year from the date of manufacture.
PACKING
Available in 25Kg net weight PP bags with moisture-proof liner inside
EcoTexTM-SL20 - PVA FREE ONE-SHOT PRODUCT
DESCRIPTION New generation eco-friendly one-shot product for a high-speed shuttleless loom. It is mainly used for 6 to 203 cotton yarns sizing. This product is entirely biodegradable and ecological.
Products are made from grafted starch, anionic polymers, and synthetic fatty matters. It contains a maximum of 13% moisture and an optimized viscosity level. Easily disperse in cold water with little swelling property due to high binding property. Having high penetration power and plasticizing power for heavy construction fabrics weaving.
SPECIFICATIONS
1.Appearance - Off white powder
2.pH value of 5% solution - 6 to 8
3.Solubility - Partially soluble in cold water
4.Viscosity of size mix - 5 to 6 sec (SITRA -6mm cup)
5.Total Moisture - Max 13%
6.Bulk density - 0.5 to 0.6 g/ml
7.Total ash - Max4%
COOKING METHOD
1. Fill the required quantity of water in the cooker.
2. Gradually add EcoTexTM-SL20 and mix for 2 min.
3. Add other ingredients and mix for 2 min.
4. Close the pressure cooker lid.
5. Open the steam value and cook to @ 120�? �ºC or 35psi.
6. Retain in the cooker for 15 to 20 minutes.
7. Then transfer the size mix to storage.
PROPERTIES
1. Moisture regain:
The formation of thin flexible film absorbs water molecules from atmospheric air that maintains the required moisture content of the sized yarn. This property improves the weaving efficiency by reducing the warp stops.
2. Film property:
The very thin strong film gives the inter fibre penetration that improves yarn tensile strength. Optimum elongation and flexible property significantly reduce warp break by overcoming the applied tension during weaving.
3. Abrasion resistance:
A strong film withstands the mechanical friction between yarn to yarn and yarn to machine parts like reed, dropper pin, heald wire, and weft picking element.
DE-SIZING
Easily de-sizable product with hot alkali treatment.
STORAGE
Keep away from direct sunlight and store in a cool, dry, and well-ventilated place.
STABILITY
Stable for one year from the date of manufacture.
PACKING
Available in 50Kg net weight PP bags with moisture-proof liner inside.
SOLAR GLASS
JHG solar glass including texture glass and flat glass ,it is the nice performance low iron glass with high solar transmittance, and low reflection .
After tempered, it will be the ideal choice for photovoltaics, solar thermal collector ,and greenhouse .
Size
Maximum Size:1665*2200mm
Minimum Size: 300*300mm
Specifiction
Main thickness 2-5mm
Dimension tolerance �?�±1.0mm
Thickness tolerance �?�±0.2mm
Diagonal tolerance 0.2%
Overall bow <0.2%
Iron content 110ppm
Solar transmittance from 91.5-99%
(wavelength rang 380-1100mm)
Hardness H
Main glass series
2-5mm Tempered low iron float glass
2-5mm Tempered low iron texure/mistlite glass
2-5mm AR coating glass
2-5mm High hazed tempered glass
2-5mm silk printed tempered glass
JH Glass shower door is produced with several types of raw glass. The current modern design trend has given us more choice on glass types, colors, and patterns. Shower door glass is made by tempered glass, with excellent drilling, cutouts, polished edge.
Products series :
Tempered clear glass
clear glass is the most ordinarily used option for shower enclosures, low cost and easy clean
Tempered raindown/nashiji pattern glass
The pattern bring distinctive decorative on glass surface
Let the glass in high opacity ,guarantee a higher level of privacy
One side of the glass is patterned ,and the other side is flat for easier cleaning
Tempered acid etched glass/ gradient change glass
Processed on base of acid etched glass
The opaque and satin surface bring artistic effect
Gradient change is an interesting new decorative products ,and rapidly accepted by modern shower door designs.
Tempered low iron glass
High light transparent with colorless appearance
The glass blue edge makes the whole shower enclosure in high grade
Tempered glass with anti-limescale coating
For preserve the functional and aesthetic properties of shower glass , JHG offer coated glass for avoid damage caused by water sediments.
JHG shower door is produced with several types of glass. The current modern design trend has given us more choice on glass types, colors, and patterns.
Shower door glass is made with tempered glass,laminated glass , with excellent drilling ,cutouts ,and polished edge
The main products series :
** Tempered clear glass
clear glass is the most ordinarily used option for shower enclosures, low cost and easy clean
**Tempered pattern glass
The pattern bring distinctive decorative on the glass surface
Let the glass in high opacity ,guarantee a higher level of privacy
One side of the glass is patterned ,and the other side is flat for easier cleaning
JHG shower door is produced with several types of glass. The current modern design trend has given us more choice on glass types, colors, and patterns.
Shower door glass is made with tempered glass , with excellent drilling ,cutouts ,and polished edge
The main products series :
**Tempered clear glass
clear glass is the most ordinarily used option for shower enclosures, low cost and easy clean
**Tempered rain/nashiji pattern glass
The pattern bring distinctive decorative on the glass surface
Let the glass in high opacity ,guarantee a higher level of privacy
One side of the glass is patterned ,and the other side is flat for easier cleaning
