Find Verified E Series Wind Turbine Generator Suppliers, Manufacturers and Wholesalers

Nacelle adopt aluminum alloy compression molding, light in weight;
Silicon steel sheet: using model 600 cold rolling silicon steel sheet, difficult to be heated;
Rotor: material of the magnet is ndfeb( h grade), high efficiency and thermostability;
Tail: molding by fiber glass mat, good suppleness and high intensity.


Wood box

Phase Three Phase

Machine Structure Horizontal
Color Grey
Voltage 440
Condition Used
Operating Mode Automatic
Power 3-6kw
Pressure High Pressure
Uses Automotive Industry, Steel Industry
Specialities High Performance
Port India port

Small wind turbine generator.

Accumulators full charge time: about 8 hours
> Mast height/weight: 9m - optional /150kg
> Weight: 300kgs (without mast).

Basic Parameters
Rated Power(kw) 60 Survival Wind Speed(m/s) 45
Max Power(kw) 65 Working Wind Speed(m/s) 1-25
Rated Voltage(v) 420/600 Rated Wind Speed(m/s) 10
Rated Rotation(r/min) 100 Blade Length(m) 8.6
Cut-in Wind Speed(m/s) 1 Blade Material FRP
Cut-out Wind Speed(m/s) 25 Generator Life(year) 20
                          Some Key Technology
Control Method Adjust Speed Method centrifuge variable pitch
Brake Method electromagnetic
Generator  Generator Configuration 3-phase 380/220v 50/60hz
Generation Type 3-phase permanent magnet
Protect Class IP54

Rotor diameter:
18.0m
Blades quantity:
3pcs
Direction:
always upwind
Blades material:
Carbon fiber reinforced plastic
Rated output:
50KW
Power supplied to Grid
60KW [in 5seconds]
working voltage:
DC500-800V,AC380-400V
Annual average energy production:
110MWH (in rate 5m/s wind speed)
working wind speed:
3-25m/s
Initial wind speed:
3.0m/s
Nominal wind speed:
10.0m/sï¼?33.6mphï¼?
Storm-stand:
up to 55m/s
Max rotate speed:
60r/min
Wind turbine type:
PM 40 poles synchronous generator,
Working temperature:
from -40 to +60 C
Blade Pitch Control
Variable Pitch setting
Over-speed Protection
-Aerodynamic braking system+
-hydraulic rotor brake
Speed Regulate and
Shut Down Methods
-Electro-Yawing, Positive Pitch and
-Electric Magnet dumping brake
Gearbox:
None, Direct Drive
Hub height (m)
18-20-24-35 (free-standing or hydraulic tower)

Rotor diameter:
12.56m
Blades quantity:
3pcs
Direction:
always downwind
Blades material:
Carbon fiber reinforced plastic
Rated output:
30KW
Power supplied to Grid
32KW [in 5seconds]
working voltage:
DC500/600V,AC220V/380V
Annual average energy production:
70MWH (in rate 5m/s wind speed)
working wind speed:
3-35m/s
Initial wind speed:
2.5m/s
Nominal wind speed:
12.0m/s
Storm-stand:
up to 55m/s
Max rotate speed:
100r/min
Wind turbine type:
Three-phase, PMG Alternator
Working temperature:
from -40 to +60 C
Blade Pitch Control
Variable Pitch
Over-speed Protection
Aerodynamic brake + Electromechanical disc brake
Speed Regulate and Shut Down Methods
Electro-Yawing,Positive Pitch and Electric Magnet Switch.
Gearbox:
None, Direct Drive
Tower style and height
Free-standing tower 15m, 18m up to 35m.

Rotor diameter:
12.35m
Blades quantity:
3pcs
Direction:
always downwind
Blades material:
Carbon fiber reinforced plastic
Rated output Power:
20KW
Power supplied to Grid
24KW [in 5seconds]
working voltage:
DC360V/500V,AC220V/380V
Annual average energy production:
50MWH (in rate 5m/s wind speed)
working wind speed:
3-35m/s
Initial wind speed:
2.0m/s
Nominal wind speed:
9.0m/s30.3mph
Storm-stand:
up to 55m/s
Max rotate speed:
120r/min
Wind turbine type:
Three-phase, PMG Alternator
Working temperature:
from -40 to +60 C
Blade Pitch Control
Variable Pitch
Over-speed Protection
Aerodynamic brake + Electromechanical disc brake
Speed Regulate and Shut Down Methods
Auto-Yawing, Positive Pitch and Electric Magnet Switch.
Gearbox:
None, Direct Drive
Battery charge time: SENWEI-

Rotor diameter:
5.0m
Blades quantity:
3pcs
Direction:
always upwind
Blades material:
Glass fiber reinforced plastic
Rated output Power:
5Kw , 5000W
Maximum output power:
9500W
working voltage:
DC48/96/120/240/500V,AC220V/380V
Annual average energy production:
11315KWH (in rate 5m/s wind speed)
working wind speed:
3-25m/s
Initial wind speed:
2.5m/s
Nominal wind speed:
10.0m/s22.3mph
Storm-stand:
up to 50m/s
Max rotate speed:
240r/min
Wind turbine type:
Three-phase, PMG Alternator
Working temperature:
from -40 to +60 C
Blade Pitch Control
Fixed Pitch-www.windpowercn.com
Over Speed Protection
Auto-furl
Speed regulation methods:
Yawing and electrical magnet switch
Stop Methods
Manual Brake + Hydraulic Brake
Gearbox:
None, Direct Drive
Batttery full charge time:
about 8 hours

Rotor diameter:
3.5m
Blades quantity:
3pcs
Direction:
always upwind
Blades material:
Glass fiber reinforced plastic
Rated output power:
2000W
Maximum output power:
2950W
working voltage:
DC24/36/48/96/120/240V,AC220V
Annual average energy production:
4672KWH (in rate 5m/s wind speed)
working wind speed:
3-25m/s
Initial wind speed:
2.5m/s
Nominal wind speed:
8.0m/s17.8mph
Storm-stand:
up to 50m/s
Max rotate speed:
400r/min
Wind turbine type:
Three-phase, PMG Alternator
Working temperature:
from -40 to +60 C
Blade Pitch Control
Fixed Pitch-
Over Speed Protection
Auto-furl
Speed regulation methods:
Yawing and electrical magnet switch
Stop Methods
Manual Brake + Hydraulic Brake
Gearbox:
None, Direct Drive
Batttery full charge time:
about 8 hours

Power: 600w
Rotor diameter: 2.5m
Blades quantity: 3 pcs
Blades material: frp (composite material)
Rated speed: 400r/min
Rated output power: 600w
Max output power: 750w
Output voltage: dc24v/ac220v
Start wind speed:3m/s
Rated wind speed:8m/s
Working wind speed: 3-25m/s
Security wind speed: 40m/s
Speed regulation: yaw& magnetic resistance
Charge control: aic (automatic intelligent control)
Wind turbine type: pmg (on constant magnets)
Working temperature: from -40 to +60 c
Annual average energy production: 1500kwh
Recommended accumulators: 300ah
Accumulators full charge time: about 8 hours
Tower type: pull wire tubular tower or standarding alone tower(optinal)
Tower height:6m (optional) weight: 40kgs (without tower)
Can supply power for: color tv, lighting, electric fan and charger.



Packing is by plywood box.

Power: 1KW
Rotor diameter: 2.8m
Blades quantity: 3 pcs
Blades material: FRP (composite material)
Rated speed: 360r/min
Rated output power: 1000W
Max output power: 1500W
Output voltage: DC48V/AC220V
Start wind speed:3m/s
Rated wind speed:8m/s
Working wind speed: 3-25m/s
Security wind speed: 40m/s
Speed regulation: yaw& magnetic resistance
Charge control: AIC (automatic intelligent control)
Windturbinetype: PMG (onconstantmagnets)
Working temperature: from -40 to +60 C
Annual average energy production: 2500kWh
Recommended accumulators: 600Ah
Accumulators full charge time: about 8 hours
Tower type: pull wire tubular tower or cone tower(optinal)
Tower height:6m (optional)
Weight: 45kgs (without tower)
Can Supply Power For: water pump, TV, Washer, Illumine, Fanner, Charge.


Packing is by plywood box.

Main Parameter:
Model: TR10.0-20KW
Rated Power: 20KW
Max Power: 25KW
Generator: Three Phase Permanent Magnet Alternator
Rated Output Voltage: 360V
Start Wind Speed: 2m/s
Rated Wind Speed: 12m/s
Maximum Wind Speed: 45m/s
Rotor Diameter: 10.0m
Rated Rotor Speed: 90r/m
Blade Number: 3
Blade Material: Reinforced fiber glass
Blade Pitch Control: None, Fixed Pitch
Overspend Protection: Auto programmed control
Gearbox: None, Direct Drive
Temperature Range: -40 to +70 Deg. C
Tower Type: Wire Guyed or Free Standing
Tower Height: 18m or higher

Main Parameter:
Model: TR8.0-10KW
Rated Power: 10KW
Max Power: 12KW
Generator: Three Phase Permanent Magnet Alternator
Rated Output Voltage: 240V
Start Wind Speed: 2m/s
Rated Wind Speed: 10m/s
Maximum Wind Speed: 45m/s
Rotor Diameter: 8.0m
Rated Rotor Speed: 180r/m
Blade Number: 3
Blade Material: Reinforced fiber glass
Blade Pitch Control: None, Fixed Pitch
Overspend Protection: Auto programmed control
Gearbox: None, Direct Drive
Temperature Range: -40 to +70 Deg. C
Tower Type: Wire Guyed or Free Standing
Tower Height: 12m,18m or higher

Main Parameter:
Model: TR6.4-5000W
Rated Power: 5000W
Max Power: 6000W
Generator: Three Phase Permanent Magnet Alternator
Rated Output Voltage: 240V
Start Wind Speed: 2m/s
Rated Wind Speed: 10m/s
Maximum Wind Speed: 45m/s
Rotor Diameter: 6.4m
Rated Rotor Speed: 200r/m
Blade Number: 3
Blade Material: Reinforced fiber glass
Blade Pitch Control: None, Fixed Pitch
Overspend Protection: Auto programmed control
Gearbox: None, Direct Drive
Temperature Range: -40 to +70 Deg. C
Tower Type: Wire Guyed or Free Standing
Tower Height: 12m,18m or higher

Main Parameter:
Model: TR3.2-1000W
Rated Power: 1000W
Max Power: 1500W
Generator: Three Phase Permanent Magnet Alternator
Rated Output Voltage: 48V
Start Wind Speed: 2m/s
Rated Wind Speed: 8m/s
Maximum Wind Speed: 35m/s
Rotor Diameter: 3.2m
Rated Rotor Speed: 400r/m
Blade Number: 3
Blade Material: Reinforced fiber glass
Blade Pitch Control: None, Fixed Pitch
Overspend Protection: Auto programmed control
Gearbox: None, Direct Drive
Temperature Range: -40 to +70 Deg. C
Tower Type: Wire Guyed or Free Standing
Tower Height: 6m ,9m or 12m

Rotation speed120r/min
Blade materialFiberglass
Number of blades3 pieces
Turbine weight75kg
Package size (m)2.0*1.2*1.2
PackingPlyboard and steel tubes
Tower height 6m
Tower type Steel (q235b)


Plyboard and square steel tube material package, 2.0m x 1.2m x 1.2m

Model: ZH2KW
Rated Power: 2000 Watts
Maximum Power: ~ 2500 Watts
Type: 3 Blade Upwind
Rotor Diameter: 3.6 m (12 ft.)
Start-up Wind Speed: 2.5 m/s(5.6 mph)
Cut-in Wind Speed: 3m/s (6.7mph)
Rated Wind Speed: 10 m/s(22mph)
Cut-Out Wind Speed: None
Furling Wind Speed: 18 m/s (40mph)
Max. Design Wind Speed: 50 m/s (112mph)
Blade Pitch Control: None, Fixed Pitch
Over speed Protection: Auto Furl
Gearbox: None, Direct Drive
Temperature Range: -40 to +60 Deg. C (-40 to +140 Deg. F)
Generator: Permanent Magnet Alternator
Output Form: 48 VDC Nominal .

Wooden case.

Wind turbine generator
we provide wind turbine generator with capacity rom 600kw- 2mw with German or international standard quality. The quotation is of competitiveness with satisfied quality.
S43/600KW Wind Generator Sets
Main parameters: installed elec. output 600KW/cut-in wind speed 3.2m/s/rated wind speed 15m/s/cut-out wind speed 24m/s/survival wind speed 70m/s/operating temperature -30fpC-45fpC/total weight 65000kg
(Rotor :rotor diameter 43m/s wept area 1452m2/number of blades 3/rotational speed 26.8or17.9 rpm/power regulation, stall
(Blade:designation,LM19.1/FD43-600 made in China/aerodynamic profile FFA W3 NACA 634/blade material, fiberglass reinforced polyester/aerodynamic brakes, turning blade tip/weight 1960kg
(Gear box:type,1-stage planetary,2-stage parallel axles/ratio 1:56.6/Rated power 645KW/efficiency 0.97/rated torque 230KN.m
(Generator: rated output 600or 125KW/number of poles 4or6/rated voltage 690V/rated current 560or126A/frequency 50Hz/rated speed 1517or1013rpm
(Tower: height 38.5or48.5m/weight 33000 or45800kg
(Yaw system :type, active/yaw rate 0.2
S48/750KW Wind Generator Sets
Main parameters: installed elec. output 750KW/cut-in wind speed 3.2m/s/rated wind speed 15m/s/cut-out wind speed 24m/s/survival wind speed 70m/s
(Rotor: rotor diameter 48.4m/swept area 1840m2/number of blades 3/rotational speed 22.3or14.9 rpm/power regulation, stall
(Blade:designation,LM23.2/aerodynamic profile, NACA 63xx-634xx/blade material, fiberglass reinforced polyester/aerodynamic brakes, turning blade tip/weight 3050kg
f(Gear box:type,1-stage planetary,2-stage parallel axles/ratio 1:68.2/efficiency fª0.97
(Generator: rated output 750or 185KW/number of poles 4or6/rated voltage 690V/rated current 560or126A/frequency 50Hz/rated speed 1520or1013rpm
(Tower: height 65m/weight 75000kg

different dimensions

Fasteners are the general term of the class of mechanical parts used in fastening two or more parts (or components) into a whole. It is widely used in energy, electronics, electrical appliances, machinery, chemical, metallurgy, mold, hydraulic and other industries, at the same time, in various kinds of machinery, equipment, vehicles, ships, railway, bridge, construction, structure, tools, instruments, chemical, instruments and supplies, you can see all kinds of fasteners, is the most widely used mechanical foundation parts. It is characterized by a wide variety of variety specifications, different performance uses, and a very high degree of standardization, series, and generalization. Therefore, a class of fasteners that already have national standards is called standard fasteners, or simply standard ones.