Name Of Product - Kiddale Safety Gate (Barrier, Fence) for Baby Kids, Dogs, Pets, Infants and Babies To Use at Home Suitable for Passage Width Between (75-82 cm) -2.5 ft Gate
Key Specifications/Special Features - Key Features of gate: 1.Metal Frame: Iron tube + plastic lock 2. Paint: Powder coating 3. Best used for: 0-2 years 4. Lock system: Double lock and open device. 5. Suitable the width of channel / door: size can be adjusted according your requirements of <3ft to unlimited length with separate purchase of extensions 6. Door can be opened and closed easily with push button 7. Option to buy SIDE CUPS for permanent installation 8. Option to buy STAIR CASE FITTINGS 9. Easy to relocate 10. Complies with International Safety Standard: BS EN1930:2000 and suitable for children under 36 months in all gate listings Basic Gate Dimensions Height: 76.5 cm/30 inch Min Passage Length that can be covered-29.5 inch/75cm Max Passage Length that can be covered with Basic Gate without any extension- 33 inch/84CM Please check the product dimension add dimension of your place where it can fit. 3 Ft Gate Requirement
Product Keywords - Wall Mirros, Wall Hangings, Show Items, Gift Items
Eliminates unnecessary signal conversions.
Supports standard, enhanced, or high-definition video at 24 bits/pixel, 165MHz max clock frequency.
Supports up to 8 channel digital audio on a single cable eliminating costly A/D signal conversions.
Bi-directional control signal transfer.
5 Gbps bandwidth, 55% spared for future expansion.
Simple, user-friendly connector.
Per HDMI standard, HDTV sent as 16x9 & SDTV as 4x3 over 30 AWG 100 ohm, .5 amp, 500 VAC DWV double shielded cable.
Play Station 3 Compliant
Features
1 Suitable for LED lamp beads repairing, size of micro LED components not less than 0.6*0.6mm can be repaired
2 Suitable for LED lamp beads of tape packaging and bulk materials, also any BGA and components which are difficult to repair.
3 High solution optical alignment system, accurate LED components positioning, ensure precise mounting.
4 Optical alignment is controlled electrically, can rotate automatically
5 Mounting head built-in pressure testing device, to protect the PCB
6 Built-in infrared laser positioning, fast positioning for PCB.
7 Adopt HIWIN precision guide rail for up and down movement system, ensure reliable and accurate running
8 Adopt up and down alignment for top and bottom heater, heating for appointed local zone, prevent PCB to turn yellow.
9 Bottom heater up and down manually, can adjust the heating height real time.
10 Adopt ceramics infrared radiator for IR heater, heating stably and uniformly with long serve life
11 Human-machine interface has multiple operation mode and permission, welding, and mounting manually, easy operation.
12 High resolution touch screen, which is up to 800*600 pixel
13 Adopt joystick control for alignment system, no need setting complicated parameters
14 Adopt Delta double ball bearing flow fan for air supply¡ê;no need external air source
15 Adopt DCCE 6 channel module for temperature control system, automatic PID adjustment
16 Monitoring heaters real time, when accident happens, relevant sensors will send signal to PLC,which will close output channel and display fault condition. Protect itself automatically.
Specifications
Total Power Max 5300W
Power AC 220V10% 50/60 Hz
Top heater power 1200W
Bottom heater power 1200W
IR power 2700W
Hot air temp. 400 230; (Max)
Preheating temp. 400
Positioning V-groove +laser positioning + universal fixture
PCB size Max 410 370 mm
Preheaing size 370mm 270mm
Chip type BGA,QGN,CSP,POP,QFN, Micro SMD,LED lamp beads
Chip size Max 80¨80mm Min 22 mm
Dimensions L640 W630 H900 mm
Temperature sensor 1 piece
Net weight 70kg
Package Wooden box
Dimension :80*80*105cm
Gross weight: 120kg
Delivery time: 3-7 working days
Features
1 Suitable for LED lamp beads repairing, size of micro LED components not less than 0.6*0.6mm can be repaired
2 Suitable for LED lamp beads of tape packaging and bulk materials, also any BGA and components which are difficult to repair.
3 High solution optical alignment system, accurate LED components positioning, ensure precise mounting.
4 Optical alignment is controlled electrically, can rotate automatically
5 Mounting head built-in pressure testing device, to protect the PCB
6 Built-in infrared laser positioning, fast positioning for PCB.
7 Adopt HIWIN precision guide rail for up and down movement system, ensure reliable and accurate running
8 Adopt up and down alignment for top and bottom heater, heating for appointed local zone, prevent PCB to turn yellow.
9 Bottom heater up and down manually, can adjust the heating height real time.
10 Adopt ceramics infrared radiator for IR heater, heating stably and uniformly with long serve life
11 Human-machine interface has multiple operation mode and permission, welding, and mounting manually, easy operation.
12 High resolution touch screen, which is up to 800*600 pixel
13 Adopt joystick control for alignment system, no need setting complicated parameters
14 Adopt Delta double ball bearing flow fan for air supply no need external air source
15 Adopt DCCE 6 channel module for temperature control system, automatic PID adjustment
16 Monitoring heaters real time, when accident happens, relevant sensors will send signal to PLC,which will close output channel and display fault condition. Protect itself automatically.
Specifications
Total Power Max 5300W
Power AC 220V10% 50/60 Hz
Top heater power 1200W
Bottom heater power 1200W
IR power 2700W
Hot air temp. 400(Max)
Preheating temp. 400Max
Positioning V-groove +laser positioning + universal fixture
PCB size Max 410 ,370 mm
Preheaing size 370mm,270mm
Chip type BGA,QGN,CSP,POP,QFN, Micro SMD,LED lamp beads
Chip size Max 80,80mm Min 22 mm
Dimensions L640 W630 ,H900 mm
Temperature sensor 1 piece
Net weight 70kg
Package Wooden box
Dimension :80*80*105cm
Gross weight: 120kg
Delivery time: 3-7 working days
Designed for mobile operators and dj performances and engineering designed 3u cd player
Design and manufacturing in taiwan
2 +1 u body design --- the world's smallest dual-mp3 cd drive to achieve
Can read mp3 and cd interface with id3 song name
Usb input signals - read very fast
Cd / usb switch button
Japan's sanyo inhaled high-quality skinhead movement and mechanical shock
8 multiple read memory, 40 seconds of electronic shock
Read the disc fast and stable
Speed pitch +-12
Pitch bend +-16
Single and continuous playback
Auto cue
Bpm tap
Uninterrupted seamless cycle of a-b points
Real time loop
Wheel-type selections feature (keys +10 selections attached)
Use this button to repeat a single song or all the track of cd
100v-240v switching power supply specifications for international
Programming selections
Optimize signal to noise ratio ~ ~ ~ sound very good
Alps shuttle-day double dial
Led night lights blue cold light show
Rca stereo output signal
A large blue screen to enable easy identification of clear
Mp3 file data folder button to choose
The full time display
Specifications¡g
Power supply¡g100v-240v (50hz/60hz)
Power consumption¡g15w-25w
Snr¡g96db (a-wtd)
Audio output¡g200mv
Frequency response¡g20hz-20khz
Audio output¡grca
Sound specifications¡gcd¡bcd-r¡bcd-rw¡bmp3¡busb
Disc specification¡g12cm
Total harmonic distortion¡g<0.01% (200hz lpf 20khz lpf)
Dynamic range¡g>98db (20khz lpf a-wtd)
Channel separation¡g>90db (at-1khz)
Distortion¡g>0.01%
Data decoding ¡g16-bit
Frequency¡g44.1khz
Size¡g483mm * 44mm *280mm (player 1u) 483mm * 88mm * 60mm (controller 2u)
Weight¡g6.1 kg
Movie theater multi channel audio system
Movie theater multi channel audio system
Support any audio input with rca connector or other customization connector
Audio input interface
Our multi-audio systems provide 8 x high stereo audio connections from external audio sources such as fm radio and cd players.Mp3 player, dvd and so on
Features:
One 1.4" (36mm) HF driver: 106db @1w, 1m (single cabinet);
Consistent 120¡ã(-6db) horizontal mid and hf pattern control;
Passive or biamp operation;
Fast, integral rigging system with variable splay angles;
Factory controller presets for a wide variety of configurations
Specifation:
Stadium, middle and small scale performance system;
Large-scale opera house, music hall;
Entertainment center, conference center.
RATED POWER:250W RMS,1000W peak
SENSITIVITY:97dB 1watt/1 metre
MAXIMUM SPL:121 dB continuous,127 dB peak
IMPEDANCE:8 ohms nominal
DISPERSION(-6dB):Horizontal covrage£º120¡ãVertical coverage£ºVaries,depending on array length and configuration
CROSSOVER:800Hz, 2.5kHz passive
CONNECTORS :2*Speakon Nl4
PACKAGE SIZE:380mm*280mm*635mm(1PCS)
NET WEIGHT:14 kg.
Available models:
Cards are stackable to obtain 64 channels maximum
Ds4016hci
16 channels video and audio cif (real time)
Or 8 channels video and audio 4cif (real time)
Or 16 channel dcif (real time)
Or 16 channel 4cif(not real time)
Features & functions :
Real-time video and audio compression, no frame lost
4cif preview resolution
Comply with pci 2.2 standard , a pc can support up to 64 channels
Support windows 2000/xp operating system
Setable video quality and bitrate
Setable brightness , contrast , saturation and hue of video signal
Support motion detection
Support osd , logo and mask overlay
Support watermark technology
Support double encoding specifications:
Description and Application
W-210A is a line array speaker which is made of two 10'' neodymium woofers, two 2'' titanium neodymium compression drivers and high-performance low-distortion compression driver with innovative horn design of waves phase philosophy. It is a zero interfere line array with multi- speaker combined to produce accurate directivity and maximum dynamic impact. Wherever low frequency extension is required, a W-210A will integrate seamlessly with W-250A line array sub-bass system in a standard configuration. Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely. W-210A is very versatile and scalable for a wide range of applications in touring performance, corporate and fixed installation fields.
W-250A is dedicated high performance sub-bass system designed to augment the low frequency output of the W-210A, W-250A is a sub-bass enclosure which must be flown with W-210A. So its physical dimensions are identical to the W-210A and it is equipped with the same proprietary rigging system. It features with twin 15¡± neodymium woofers with magnet structure and suspensions engineered for maximum linear excursion
Model W-210A/W-250A
Type Line array system
Line array sub-bass system(W-250A)
Frequency Response 55Hz-20KHz 3dB
40Hz-150Hz 3dB(W-250A)
Directivity index(Dl) 12(¡À2)1.2KHz-16KHz
Power handing LF 500W(RMS)1000W(PEAK)
HF 160W(RMS)320W(PEAK)
1200W(RMS)2400W(PEAK)(W-250A)
Sensitivity LF 99dB(1W@1M)
HF 108dB(1W@1M)
112dB(1W@1M)(W-250A)
MaxS.P.L LF 127dB(PEAK/1M)
HF 127dB(PEAK/1M)
143dB(PEAK/1M)(W-250A)
LF section 2¡Á10"(260mm) neodymium woofer
75mm(3in)coil
Components 2¡Á15"(380mm) neodymium woofers
100mm(4in)coil(W-250A)
Nominal impedance 16 ohm
4 ohm(W-250A)
HF section 2¡Á2"neodymium compression driver
with 51mm titanium diaphragm
Nominal impedance 16 ohm
Output section 2-channel
Dispersion pattern 110¡ãH¡Á9¡ãV
Finish Water-proof,wear-resistant textured black paint
Array design Arrays of less than 3¡ÁW-210A will
provide poor dispersion control and
are neither recommended nor supported
Speaker cables LF 1(+)1(-) HF 2(+)2(-)
1(+)1(-) (W-250A)
Rigging system Please refer to the W-210A user
manual before any operation
Input connectors 2¡ÁNL4MP speakon
Recommend crossover LF 45Hz-1200Hz
HF 1200Hz-20KHz
35Hz-120Hz(W-250A).
Name:1200w moving head
Item:gp3000spot
Technical parameter
Voltage: ac110v-240v/50hz-60hz
Lamp: hmi 1200w/s
Ballast: induction ballast electronic ballast¿can order
Control channels: 32 ch
Control signal: dmx 512
Control panel can control on/off of lamp, blue/white lcd graphic
Full range dimming and variable strobo effect
1 color wheel, 6 replaceable slot&lock colours plus 1 white light
Achieving high speed single way rainbow and scrolling effect
2 gobo wheel, 6 rotating, indexable, replaceable slot&lock dichroic
Glass gobos plus 1 white light each
The revolving gobos can be freely tuned forward or backward,
Quickly or slowly
1 effect wheel, 4 rotating, indexable, replaceable slot&lock prisms and
Effects plus 1 white light
Pan 530 and tilt 280 scanning range, smooth scanning action and
Accurate orientation
Pan tilt with 8 or 16bit resolution, gobo indexing and prism with 8 or 16bit
Focus 2m to infinity, controllable linear variation 13 to 42 zoon lens unit
Maximum ambient temperature : 40c, maximum surface temperature: 135c
According to kinds of safety standards, ip20 protect grades
Size: 88 x 55 x 64 cm
N.W.: 41 kg g.W.: 45 kg
Wt fiber-optic video transceivers can simultaneously transmit 4 channels of 8-bit digitally encoded video / return or bidirectional data / unidirectional or bidirectional audio / ethernet / telephone / dry contact over one multimode or single-mode optical fiber. These multiplexers are typically used in applications where the cameras have p/t/z capabilities. Plug and play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. Led indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation, which is suitable for different working environment.
Product characteristics
1. 8-bit digitally encoded and non-compression video transmission
2. Directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232, RS- 422, and RS-485 data protocols
3. Support any high-resolution video signal
4. Automatic compatible PAL, NTSC and SECAM video system
5. Power supply and other parameter state indication, which can monitor the operation condition of system
6. Support no-damage regenerative trunk of video
7. Constant input optical power, and large dynamic range ,no Electrical or Optical Adjustments Required .
8. Special ASIC design .
9. Industry-grade of operating temperature from -40C-85C, which is applied to the different working environment
10. Hot-swap function
11. Stand-alone type or card-type installed in 19 2U or 4U rack-mount chassis.
Scunoe video digital fiber converter transceivers can simultaneously transmit 1-64 channels of 8-bit digitally encoded video / return or bidirectional data / unidirectional or bidirectional audio / ethernet /telephone / dry contact over one multimode or single-mode optical fiber. These multiplexers are typically used in alications where the cameras have p/t/z capabilities. Plug and play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. Led indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation , which is suitable for different working environment .
Product characteristics
1. 8-bit digitally encoded and non-compression video transmission
2. Directly compatible with ntsc, pal, and secam cctv camera systems and support rs-232, rs-422, and rs-485 data protocols
3. Support any high-resolution video signal
4. Automatic compatible pal, ntsc and secam video system
5. Power supply and other parameter state indication, which can monitor the operation condition of system
6. Support no-damage regenerative trunk of video
7. Constant input optical power, and large dynamic range , no electrical or optical adjustments required .
8. Special asic design .
9. Industry-grade of operating temperature from -10 to 75 , which is alied to the different working environment
10. Hot-swap function
11. Stand-alone type or card-type installed in 19í»í» 2u or 4u rack-mount chassis.
Operating voltage: dc5v (we will offer external ower suly from ac96-240v to dc5v for each unit)
Operating temperature: -10 to +75
Storing temperature: -55 to +85
Humidity: 0 to 95% non-condensing
Application :
Intelligent transportation system
Connection of sub-network for surveillance center
Public security surveillance
High way & toll station surveillance
Industrial closed circuit television surveillance
Wky-robe 1200r
Source
Lamp:1200w short arc discharge
Base:g-22
Approved model:philips msr1200sa
Jenbo msk 1200s
Electrical specification
Height:880mm
Width:550mm
Depth:640mm
Net weight:47kg
Gross weight:77kg(with flycase)
Thermal
Maximum ambient temperature: 40c (104f)
Maximum surface temperature: 135c(275f)
Control and programming
Protocol: usitt dmx-512
Control channels:17, 21, 23, 24, 30
Dmx channels: 4 protocol models
Built-in demo squences
Display: blue/white lcd graphic
Pan/tilt resolution:16-bit
Color wheel 1 positioning:8-or-16-bit
Color wheel 2 positioning:8-or-16-bit
Zoom:8-or-16-bit
Dimmer:8-or-16-bit
Controllable speed of fans
Movement control: tracking or vector
Built-in analyzer for easy fault finding
Data in/out: locking 3-pinxlr&5-pin xlr
Eleltromechanical effects
Cyan: 0-100%
Magenta: 0-100%
Yellow: 0-100%
Cto:0-100%
Color wheel:
1.6 replaceable ¦slot&lock¦ colors+ open
2.6replaceable ¦slot&lock¦colors+ open
Dimmer/shutter:
Full range dimming and variable strobe effect
Zoom:10-87depengding on the lens type used
Pan:530
Tilt:280
With flycase
178 Double Channel 2U 250W To 1200W At 8 Ohms Profes Suppliers
Short on time? Let Double Channel 2U 250W To 1200W At 8 Ohms Profes sellers contact you.
