Diethyl ether, or simply ether, is an organic compound with the chemical formula (CH3CH2)2O. It is a colourless, highly volatile, sweet-smelling, flammable liquid.
CAS 60-29-7
Are you passionate about chemistry? Are you looking for chemical reagents of the highest quality? You have come to the right place. Our online chemistry shop is the place for you!
Diethyl Phthalate is an odorless, colorless, oily liquid. It is used in making plastics, insecticides, cosmetics and aspirin, and is found in toothbrushes, automobile parts, toys, tools, and food packaging.
Lump sulfur, also known as granular or rock sulfur, is typically characterized by a purity of 99.80% or higher, with a maximum ash content of 0.05%.
It should also have a limited acidity (H2SO4) of 0.02% or 0.03% and minimal moisture content (0.5% or 0.2%).
More detailed breakdown of lump sulfur specifications:
Purity:
Dry Basis: 99.80% minimum purity is a common specification.
Other Standards: Some standards like Refinery Specifications, may specify a purity of 99.98%.
Impurities:
Ash Content: A maximum ash content of 0.05% is a typical requirement.
Acidity: A maximum acidity (H2SO4) of 0.02% or 0.03% is common.
Organic Substances: Some specifications limit organic substances to 0.01% or 0.03% maximum.
Moisture: A maximum moisture content of 0.5% or 0.2% is generally specified.
Mechanical Impurities: Some specifications require the absence of mechanical impurities like paper, wood, or sand.
Other Impurities: Some standards specify limits for arsenic, selenium, tellurium, and lead impurities.
Color and Appearance:
Color: Bright yellow is the typical color specification.
Other Considerations:
Test Methods:
Specifications often include test methods, such as ASTM D-4239, ASTM D-1509, ASTM D-1613, and ASTM D-2790, for determining the various parameters.
Bulk Density:
Granular sulfur has a bulk density of around 70 lb/cu ft (1121.29 kg/cu m).
Solubility:
Sulfur is insoluble in water, partially soluble in acetone, and slightly soluble in diethyl ether and alcohol.
Boiling point 124-126 C/3 mmHg (lit.)
Density 1.14 g/mL at 25 C (lit.)
refractive index n20/D 1.444(lit.)
Flash point >230 F
storage temp. Keep in dark place,Sealed in dry,Room Temperature
form Viscous Liquid
pka 13.00±0.10(Predicted)
color Clear colorless to yellow
Water Solubility 500g/L at 20
Description: It has excellent detergency, emulsification ,and foamability, it is easy to dissolve in water. As well as favorable hard-water resistant and high-biodegradation.
Specifications:
ITEM SLES - 70 SLES - 28
Appearance Transparent or white viscous paste light yellow transparent liquid
Odor No strange odors No strange odors
Active Matter% 70�±2 28�±2
PH value 7.0-9.5 7.0-9.5
Unsulfated matter% Max. 2.0 Max. 1.0
Sodium sulfate % Max. 1.0 Max. 0.5
Microbiological(CFU/g) Max. 100 Max. 100
Dioxane(ppm) Max. 50 Max. 50
Heavy metal(ppm) Max. 10 Max. 10
Peroxide% Max. 0.1 Max. 0.1
Color Max. 10 Max. 10
Usage:
1. Used to prepare the shampoo, bath foam, soap,hand cleaner , liquid detergent and detergent.
2. Used in hard surface cleaner, such as the glass cleaner, car cleaner, they always used with the K12ã??LAS-Naã??6501.
3.Used in the textile, paper making, leather, machinery, petroleum. Industry.
Packing: plastic drum, per 160kg/170kg/200kg/220kg net weight
Loading weight in 1x20fcl:
18.24mt for 160kg drum
19.38mt for 170kg drum
17.6mt for 220kg drum
Storage: sealed and stored at the room temperature, the shelf life is two years.
Sodium Lauryl Ether Sulfate 70% (SLES 70%) is a kind of anionic surfactant with excellent performance. It has good cleaning, emulsifying, wetting and foaming properties. It is soluble in water easily, compatible with many surfactants, and stable in hard water. It is biodegradable with low irritation to skin and eye.
Detailed Images
Items
Value
Active Matter %
70�±2.0
Unsulphated matter(ref. 100% active matter)
2.5 max
Sodium Sulphate(ref. 100% active matter)
1.5 max
pH-value(1% SLES solution)
7.0 ~ 9.5
Color (5% Am) Klett
10 max
sodium lactate food grade is colorless or slightly yellow, viscous transparent clear liquid, odorless or slightly special odor, mildly salty taste, sodium lactate content of not less than 50%, miscible with water and ethanol at any ratio, nearly neutral in its aqueous solution, and insoluble in diethyl ether and trichloromethane.
Items Standards
Appearance Clear, colourless, slightly syrupy liquid
Solubility Miscible with water and with alcohol
Identification A Reaction of lactates
Identification B Reaction of sodium
pH 5.0-9.0
Color 50APHA
Stereo chemical purity(L-isomer) 95%
Chloride 0.05%
Sulphate 0.005%
Lead 0.0002%
Sugar Passes test
Citrate/Oxalate/Phosphate/Tartrate Passes test
Methanol and methyl esters 0.025%
Assay 60%
Cyanide 0.00005%
Specification
item
value
Classification
Alcohol
CAS No.
107-88-0
Other Names
1,3-Butanediol
MF
C4H10O2
EINECS No.
203-529-7
Place of Origin
China
Grade Standard
Industrial Grade, Medicine Grade
Purity
99.8
Appearance
colorless liquid
Application
solvent
Brand Name
chemfine
Model Number
Alcohol
Density
1.069
Boiling point
229.2
FLASH POINT
121
Melting point
20.1
STEMOL PW-35 (PCE POWDER)
The product was powdered polycarboxylate superplasticizer with high performance of water-reducing and slump retention It has the benefits as follow:
1. High water reducing rate could achieve 25% above, under the conditions of mixing the concrete with the same ratio of the water, the product could improve fluidity greatly.
2. Liquid polycarboxylate superplasticizer is available by diluting the product with just water.
3. The index of performance for this product is the same with the index of pumping agent.
4. It is convenient during use & can meet the requirement of building plants in remote area by mixing the product with water.
5. The product has the features of uniforms particles, lower moisture content, excellent solubility, high range water reducing, high slump retention and so on.
TECHNICAL PARAMETER
ITEMS INDEX
APPEARANCE WHITE TO YELLOW POWDER
WATER REDUCING RATE % >25
SLUMP RETENTION 2 HR MM <120
BULK DENSITY >450
PH VALUE 7.0 - 9.0
MOISTURE <5
AIR <2.7
ALKALI <5
CHLORIDE <0.6
FINENESS, 50 MESH < 15%
MAIN PERFORMANCE:-
1. High water reducing rate: It could achieve 25% above, under the conditions of mixing the concrete with the same ratio of the water, the product could improve fluidity greatly.
2. High slump retention performance: Normally carboxylic groups is damaged of ordinary polycarboxylate superplasticizer by the high temperature during dry spray process, this product takes the special process so protect the carboxylic groups and achieve the excellent slump retention ability.
3. Excellent solubility and fast solvability: Due to uniform particles, the specific area is larger, so the product is dissolved quickly in the water then no impurity after dissolving
DOSAGE
0.2~0.3% of the aggregate material, it is instead of liquid polycarboxylate superplasticizer after dissolving the dosage after dissolving reference to the actual solid content of dissolving liquid.
sodium lactate food grade is colorless or slightly yellow, viscous transparent clear liquid, odorless or slightly special odor, mildly salty taste, sodium lactate content of not less than 50%, miscible with water and ethanol at any ratio, nearly neutral in its aqueous solution, and insoluble in diethyl ether and trichloromethane.
Items Standards
Appearance Clear, colourless, slightly syrupy liquid
Solubility Miscible with water and with alcohol
Identification A Reaction of lactates
Identification B Reaction of sodium
pH 5.0-9.0
Color 50APHA
Stereo chemical purity(L-isomer) 95%
Chloride 0.05%
Sulphate 0.005%
Lead 0.0002%
Sugar Passes test
Citrate/Oxalate/Phosphate/Tartrate Passes test
Methanol and methyl esters 0.025%
Assay 60%
Cyanide 0.00005%
Ethylene glycol dimethyl ether C4H10O2
Ethylene glycol dimethyl ether C4H10O2 CAS# 110-71-4
[M.F.] C4H10O2 M.W.:90.12
[Properties] Colorless transparent liquid ,dissolved in water and hydrocarbon solvent,non proton polar solvent .BR:84-86centigrade degree ,Density (20centigrade degree)0.8683,RR(20centigrade degree)1.3795,Viscosity(20centigrade degree)1.1,FP(open):1.11centigrade degree.
[Technical index]
Item Industrial grade Reagent grade
Purity(GC)%> 99.5
99.9
Moisture%< 0.1
0.05
Acidity(HAC)%< 0.015 0.015
Peroxide(H2O2)%< 0.005 0.005
[Usage] Mainly used in polymer, electrochemistry, boracium chemistry, resin, nitro cellulose, In this product , the benzene, xenene, terphenyl, anthracene reacts with sodium and then bring about the complex; it is also used in surface treatment, halogen analysis in gasoline, acetic acid recycle in diluted acetic acid, depaint agent, thinner, flushing agent, stabilizer, anti oxidant , thickener of lube
[Packing] 180kg/double sealing metal pail
Ethylene glycol dimethyl ether C4H10O2 CAS# 110-71-4
[M.F.] C4H10O2 M.W.:90.12
[Properties] Colorless transparent liquid ,dissolved in water and hydrocarbon solvent,non proton polar solvent .BR:84-86centigrade degree ,Density (20centigrade degree)0.8683,RR(20centigrade degree)1.3795,Viscosity(20centigrade degree)1.1,FP(open):1.11centigrade degree.
[Technical index]
Item Industrial grade Reagent grade
Purity(GC)%> 99.5
99.9
Moisture%< 0.1
0.05
Acidity(HAC)%< 0.015 0.015
Peroxide(H2O2)%< 0.005 0.005
[Usage] Mainly used in polymer, electrochemistry, boracium chemistry, resin, nitro cellulose, In this product , the benzene, xenene, terphenyl, anthracene reacts with sodium and then bring about the complex; it is also used in surface treatment, halogen analysis in gasoline, acetic acid recycle in diluted acetic acid, depaint agent, thinner, flushing agent, stabilizer, anti oxidant , thickener of lube
[Packing] 180kg/double sealing metal pail
140KG/drum, 80drums/20'fcl , net weight 11.2MT 18MT/ISO TANK
1 solvent naphtha by boiling point range is divided into 120~160�ºC, 120~180�ºC, 140~200�ºC three. It is used as a solvent for coatings made of coal tar pitch, stearic acid pitch, petroleum pitch, etc. The high boiling point components are used as diluents for cellulose esters and synthetic resins, while the others are used as solvents for the manufacture of dye intermediates. Adding petroleum solvent to naphtha can increase the solubility.
2. Used as chemical fertilizer, ethylene production and catalytic reforming raw material, can also be used in the production of solvent oil or as a blending component of gasoline products.
3047 Diethyl Ether Suppliers
Short on time? Let Diethyl Ether sellers contact you.
