5.8GHz C-band microwave, tri-level dimming function;
Input voltage: 12/24V DC;
Input current: â?¥25mA;
1~10V DC dimming output signal;
Super compact, flexible to be integrated into any suitable fixtures;
Dual-processor technology, real daylight minitoring function for built-in application;
8 pin DIP switch setting, multiple options to meet different customer demands;
Detection range up to 12m in diameter;
Operation temperature: -20~+70 degree;
RoHS compliant
The price is to be negotiated
Size: 75.1*26.6*13.8mm;
5.8GHz C-band microwave, on/off function;
Input voltage: 12/24V DC ( 5V DC version available on request);
Input current: â?¥25mA;
5V DC high-low voltage output signal;
Super compact, flexible to be integrated into any suitable fixtures;
Dual-processor technology, real Lux-off function for built-in application;
8 pin DIP switch setting, multiple options to meet different customer demands;
Detection range up to 12m in diameter;
Mounting height: 3-6m;
Operation temperature: -20~+70 degree;
RoHS compliant
The price is to be negotiated
DC motion sensor with 1~10V Dc output;
5.8GHz C-band microwave, tri-level dimming control;
Input voltage: 12/24V DC
1~10V DC putput signal;
Super compact, flexible to be integrated into any suitable fixtures;
Dual-processor technology, real Lux-off & daylight monitoring function for built-in application;
IR remote commissioning, easy setting and user friendly;
Detection range up to 12m in diameter;
Mounting height: 3~6m;
Operation temperatue: -20~+70degree;
RoHS compliant;
The price is to be negotiated
DC motion sensor with 0~10V Dc output;
5.8GHz C-band microwave, tri-level dimming control;
Input voltage: 12/24V DC
Input curent: â?¥25mA;
0~10V DC putput signal;
Super compact size, easy to be integrated;
Dual-processor technology, real Lux-off & daylight monitoring function for built-in application;
IR remote commissioning, easy setting and user friendly;
Detection range up to 16~18m in diameter;
Mounting height: max.12m;
Operation temperatue: -20~+70degree;
RoHS compliant;
The price is to be negotiated
572 Dc Motion Sensor Tri Level Dimming Hynall Hns102 Suppliers
Short on time? Let Dc Motion Sensor Tri Level Dimming Hynall Hns102 sellers contact you.
Standard Motion Sensor Module
DC Input Motion Sensor Module
5V/12V DC Input Microwave Motion Sensor - Standard Version
HNS102
5.8GHz C-band microwave, tri-level dimming function.
Input voltage: 12V DC (5V & 24V DC version available on request).
Input current: 25mA.
Features
5.8GHz C-band microwave, tri-level dimming function.
Input voltage: 12V DC (5V & 24V DC version available on request).
Input current: �?� 25mA.
0~10V DC dimming output signal.
Super compact, flexible to be integrated into any suitable fixtures.
Dual-PD technology, real Daylight monitoring function for built-in application.
8 pin DIP switch setting, multiple options to meet different customer demands.Â
Detection range up to 12m in diameter.
Mounting height: 3~6m.
Operation temperature: -20�??~ +70�?? .
RoHS compliant.
Detection range
Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application.
Hold-time
Hold-time means the time period to keep the lamp on 100% after motion detected.
*when hold-time set as 3s# sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off.
Daylight sensor
Daylight sensor means the daylight threshold to enable or disable the sensor function.
"Disable": The sensor works always, even during daylight.
w50lux": The sensor works only in twilight.
w10lux, 2luxw: The sensor works only in the dark.
Stand-by period
This is the time period that the lamp remains at a low light level before it is completely switched off in the long absence of people.
means bi-level dimming control, the fixture never switch off.
Stand-by dimming level
This is the dimmed low light level you would like to have after the hold-time in the absence of people.
5V/12V DC Input Microwave Motion Sensor Highbay Version
DC Input Motion Sensor Module
Highbay DC Input Motion Sensor
HNS111HB
5.8GHz C-band microwave.
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:25mA.
Features
5.8GHz C-band microwave.
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:25mA.
0~10V DC output signal
Super compact, flexible to be integrated into any suitable fixtures.
Dual ï¹£ PD technology, real Daylight monitoring function for built-in application.
IR remote commissioning, easy setting and user friendly.
Detection range up to 18m in diameter.
Mounting height: 10~12m.
Operation temperature: -20 ~ +70
RoHS compliant.
Settings(Remote control IR12)
Permanent ON/OFF function
Press ON/OFF button, fixture goes to permanent on or permanent off mode, sensor is disabled.
*press "Auto" ,"Reset" or "Ambient learn" to quit this mode.
Dim +/-
Press "Dim" button to automatically dim up or down the light brightness during hold-time from 10% to 100%. Another press to lock it down when desired brightness is achieved.
*after desired brightness is locked down, if user wants to dim again reversely, just press the Dim button again and then lock down the new brightness again.
Sensor mode
Press "Auto" button, the sensor starts to work and all settings remain the same as the latest status before the light was switched on/off.
Reset function
Press "Reset" button, all settings go back to factory default settings.
Factory default settings
Sensitivity=100%
Daylight sensor=disable
Hold time=90s
Twilight time=5min
Twilight level=10%
Ambient learn
Press "Ambient learn" button, the latest surrounding lux value overwrites previous lux value learned, and set as the daylight threshold. This feature enables the fixture to function well in any real application circumstance.
Test mode
"Test mode" is for testing purpose only, for users to check the functionality and choose the desired detection range. The sensor goes to test mode automatically after pressing this button.
Users can quit this mode by pressing "ON/OFF", "Reset' or any button of "Hold time". The sensor settings are changed accordingly.
*Test mode defaulted settings
Daylight sensor=disable
Hold time=3s
Twilight time=N/A
Twilight level=N/A
In this mode, when used for on/off control, after motion detected, sensor enters into a cycle of 3s on and 2s off. In this mode, when used for tri-level dimming control, after motion detected, sensor enters into a cycle of 3s on and 2s off(0.5s soft off + 1.5s off).
DC Input Motion Sensor Module
Standard Motion Sensor Module
5V/12V DC Input Microwave Motion Sensor - Standard Version
HNS101D
5.8GHz C-band microwave, tri-level dimming function.
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:25mA.
Features
5.8GHz C-band microwave, tri-level dimming function.
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:25mA.
5V DC PWM output or 0~10V DC signal.
Super compact, flexible to be integrated in t o any suitable fixtures.
Dual-PD technology, real Daylight monitoring function for built-in application.
8 pin DIP switch setting, multiple options to meet different customer demands.
Detection range up to 12m in diameter.
Mounting height: 3~6m.
Operation temperature; -20? ~ + 70?.
RoHS compliant.
Settings
Detection range
Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application.
Hold-time
Hold-time means the time period to keep the lamp on 100% after motion detected.
*when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off.
Daylight sensor
Daylight sensor means the daylight threshold to enable or disable the sensor function.
"Disable": The sensor works always, even during daylight.
w50lux": The sensor works only in twilight.
w10lux, 2luxw: The sensor works only in the dark.
Stand-by period
This is the time period that the lamp remains at a low light level before it is completely switched off in the long absence of people.
?+? means bi-level dimming control, the fixture never switch off.
Stand-by dimming level
This is the dimmed low light level you would like to have after the hold-time in the absence of people.
Daylight monitoring function
Utilizing the Dual-PD technology, this sensor can tell the difference of natural light and artificial light(lamp) from behind the diffuser, switch on automatically(even without movements) when the ambient light is below target value, and then switch off automatically whenever the artificial light is not required(ambient light is bright enough).
This is the REAL & INTELLIGENT daylight monitoring sensor for built-in installation.
Note: Lux-Off sampling time?30s; Lux-On sampling time?10s.
Lux-On function takes effect only when standby dimming period set at+?
DC motion sensor with 0~10V DC dimming and daylight harvest function
5.8GHz C-band microwave;
Input voltage: 12/24V DC;
Input current: â?¥25mA;
0~10V DC ouput signal;
Super compact, flexible to be integrated into any suitable fixtures;
Dual-processor technology, real daylight monitoring function for built-in application;
Dual-processor technology, daylight harvest function, ideal for office / commercial lighting;
IR remote commissioning, easy setting and user friendly;
Detection rang up to 12m in diameter;
Mounting height: 3~6m;
Operation temperature: -20~+70 degree;
RoHS compliant;
The price is to be negotiated.
5V/12V DC Input Microwave Motion Sensor - Standard Version
DC Input Motion Sensor Module
Adjustable Motion Sensor Module
HNS101
5.8GHz C-band microwave.
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:25mA.
5V DC high-low voltage output signal.
Features
5.8GHz C-band microwave.
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:�?�25mA.
5V DC high-low voltage output signal.
Super compact, flexible to be integrated into any suitable fixtures.
Dual-PD technology, real Lux-Off function for built-in application.
8 pin DIP switch setting, multiple options to meet different customer demands. Detection range up to 12m in diameter.
Mounting height: 3~6m.
Operation temperature: -20�?? ~ +70�??.
RoHS compliant.
Settings
Detection range
Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application.
Hold-time
Hold-time means the time period to keep the lamp on 100% after motion detected.
*when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off.
Daylight sensor
Daylight sensor means the daylight threshold to enable or disable the sensor function.
"Disable":The sensor works always, even during daylight. w50lux, 25lux": The sensor works only in twilight.
"10lux, 2lux": The sensor works only in the dark.
Remote Control DC Input Motion Sensor
Motion Sensor Module DC Input
5V/12V DC Input Microwave Motion Sensor ?? Remote Controllable Version
HNS112
5.8GHz C-band microwave, tri-level dimming control.
Input voltage 12V DC (5V & 24V DC version available on request).
Features
5.8GHz C-band microwave, tri-level dimming control.
Input voltage 12V DC (5V & 24V DC version available on request).
0~10V DC output signal.
Super compact, flexible to be integrated into any suitable fixtures.
Dual-PD technology, real Daylight monitoring function for built-in application.
IR remote commissioning, easy setting and user friendly.
Detection range up to 12m in diameter.
Mounting height: 3~6m.
RoHS compliant.
Settings(Remote control IR12)
Permanent ON/OFF function
Press ??ON/OFF?? button, fixture goes to permanent on or permanent off mode, sensor is disabled.
*press "Auto" ,"Reset" or "Ambient learn" to quit this mode.
Dim +/-
Press "Dim" button to automatically dim up or down the light brightness during hold-time from 10% to 100%. Another press to lock it down when desired brightness is achieved.
*after desired brightness is locked down, if user wants to dim again reversely, just press the ??Dim?? button again and then lock down the new brightness again.
Sensor mode
Press "Auto" button, the sensor starts to work and all settings remain the same as the latest status before the light was switched on/off.
Reset function
Press "Reset" button, all settings go back to factory default settings.
Factory default settings
Sensitivity=100%
Daylight sensor=disable
Hold time=90s
Twilight time=5min
Twilight level=10%
Ambient learn
Press "Ambient learn" button, the latest surrounding lux value overwrites previous lux value learned, and set as the daylight threshold. This feature enables the fixture to function well in any real application circumstance.
Test mode
"Test mode" is for testing purpose only, for users to check the functionality and choose the desired detection range. The sensor goes to test mode automatically after pressing this button.
Users can quit this mode by pressing "ON/OFF", "Reset' or any button of "Hold time". The sensor settings are changed accordingly.
*Test mode defaulted settings??
Daylight sensor=disable
Hold time=3s
Twilight time=N/A
Twilight level=N/A
In this mode, when used for on/off control, after motion detected, sensor enters into a cycle of 3s on and 2s off. In this mode, when used for tri-level dimming control, after motion detected, sensor enters into a cycle of 3s on and 2s off(0.5s soft off + 1.5s off).
5V/12V DC Input Microwave Motion Sensor Highbay Version
DC Input Motion Sensor Module
Highbay DC Input Motion Sensor
HNS111HB
5.8GHz C-band microwave.
Input voltage 12V DC (5V & 24V DC version available on request).
Features
5.8GHz C-band microwave.
Input voltage 12V DC (5V & 24V DC version available on request).
0~10V DC output signal
Super compact, flexible to be integrated into any suitable fixtures.
Dual ï¹£ PD technolo gy, real Daylight monitoring function for built-in application.
IR remote commissioning, easy setting and user friendly.
Detection range up to 18m in diameter.
Mounting height: 10~1 2m.
Operation temperatur e: -2 ~ +70
RoHS compliant.
Settings(Remote control IR12)
Permanent ON/OFF function
Press ON/OFF button, fixture goes to permanent on or permanent off mode, sensor is disabled.
*press "Auto" ,"Reset" or "Ambient learn" to quit this mode.
Dim +/-
Press "Dim" button to automatically dim up or down the light brightness during hold-time from 10% to 100%. Another press to lock it down when desired brightness is achieved.
*after desired brightness is locked down, if user wants to dim again reversely, just press the Dim button again and then lock down the new brightness again.
Sensor mode
Press "Auto" button, the sensor starts to work and all settings remain the same as the latest status before the light was switched on/off.
Reset function
Press "Reset" button, all settings go back to factory default settings.
Factory default settings
Sensitivity=100%
Daylight sensor=disable
Hold time=90s
Twilight time=5min
Twilight level=10%
Ambient learn
Press "Ambient learn" button, the latest surrounding lux value overwrites previous lux value learned, and set as the daylight threshold. This feature enables the fixture to function well in any real application circumstance.
Test mode
"Test mode" is for testing purpose only, for users to check the functionality and choose the desired detection range. The sensor goes to test mode automatically after pressing this button.
Users can quit this mode by pressing "ON/OFF", "Reset' or any button of "Hold time". The sensor settings are changed accordingly.
*Test mode defaulted settings
Daylight sensor=disable
Hold time=3s
Twilight time=N/A
Twilight level=N/A
In this mode, when used for on/off control, after motion detected, sensor enters into a cycle of 3s on and 2s off. In this mode, when used for tri-level dimming control, after motion detected, sensor enters into a cycle of 3s on and 2s off(0.5s soft off + 1.5s off).
5V/12V DC Input Microwave Motion Sensor Remote Controllable Version
Remote Control DC Input Motion Sensor
Motion Sensor Module DC Input
HNS111
5.8GHz C-band microwave.
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:25mA.
Features
5.8GHz C-band microwave.
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:25mA.
5V DC high-low voltage & PWM output signal(0~10v version available on request)
Super compact, flexible to be integrated into any suitable fixtures.
Dual - PD technology, real Lux -Off & Daylight monitoring function for built-in application.
IR remote commissioning, easy setting and user friendly.
Detection range up to 12m in diameter.
Mounting height: 3~6m.
Operation temperature: -20 ~ +70
RoHS compliant.
Settings(Remote control IR12)
Permanent ON/OFF function
Press ON/OFF button, fixture goes to permanent on or permanent off mode, sensor is disabled.
*press "Auto" ,"Reset" or "Ambient learn" to quit this mode.
Dim +/-
Press "Dim" button to automatically dim up or down the light brightness during hold-time from 10% to 100%. Another press to lock it down when desired brightness is achieved.
*after desired brightness is locked down, if user wants to dim again reversely, just press the Dim button again and then lock down the new brightness again.
Sensor mode
Press "Auto" button, the sensor starts to work and all settings remain the same as the latest status before the light was switched on/off.
Reset function
Press "Reset" button, all settings go back to factory default settings.
Factory default settings Sensitivity=100%
Daylight sensor=disable
Hold time=90s
Twilight time=5min
Twilight level=10%
Ambient learn
Press "Ambient learn" button, the latest surrounding lux value overwrites previous lux value learned, and set as the daylight threshold. This feature enables the fixture to function well in any real application circumstance.
Test mode
"Test mode" is for testing purpose only, for users to check the functionality and choose the desired detection range. The sensor goes to test mode automatically after pressing this button.
Users can quit this mode by pressing "ON/OFF", "Reset' or any button of "Hold time". The sensor settings are changed accordingly.
*Test mode defaulted settings
Daylight sensor=disable
Hold time=3s
Twilight time=N/A
Twilight level=N/A
In this mode, when used for on/off control, after motion detected, sensor enters into a cycle of 3s on and 2s off. In this mode, when used for tri-level dimming control, after motion detected, sensor enters into a cycle of 3s on and 2s off(0.5s soft off + 1.5s off).
5V/12V DC Input Microwave Motion Sensor - Standard Version
DC Input Motion Sensor Module
Adjustable Motion Sensor Module
HNS101
5.8GHz C-band microwave.
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:25mA.
5V DC high-low voltage output signal.
Features
5.8GHz C-band microwave.
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:25mA.
5V DC high-low voltage output signal.
Super compact, flexible to be integrated into any suitable fixtures.
Dual-PD technology, r eal Lux-Off function for built-in application.
8 pin DIP switch setting, multiple options to meet different customer demands. Detection range up to 12m in diameter.
Mounting height: 3~6m.
RoHS compliant.
Settings
Detection range
Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application.
Hold-time
Hold-time means the time period to keep the lamp on 100% after motion detected.
*when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off.
Daylight sensor
Daylight sensor means the daylight threshold� to enable or disable the sensor function.
"Disable":The sensor works always, even during daylight. w50lux, 25lux": The sensor works only in twilight.
"10lux, 2lux": The sensor works only in the dark.
APM PRO Analyzer Series: Newly designed for greater clarity and precision, delivering superior performance to exceed your customers' expectations compared to traditional devices.
APM PRO 200 for Skin Analysis Measurement Mode:
1. Customer Face
2. Hair Loss Status
3. Scalp Status
4. Hair Density
5. Keratin of Scalp
6. Sensitivity
7. Hair Thickness
8. Hair Pore Status
9. Cuticle Status
Unlock sales potential with the power of information:
With a wide touch panel and dual lenses, build your own customer CRM. Capture detailed facial images using the x1 lens and store customer information for future business opportunities. Easily compare before-and-after results to enhance customer engagement and satisfaction.
Mirroring Function:
APM's wide screen expands even further with the mirroring function, allowing customers to view the same screen in real-time during the analysis. At the end of the process, all images and results can be easily shared for a seamless experience.
Email Function:
Share all analysis images and data effortlessly. Eliminate the need for paper receipts or customer cards. customers can conveniently check their beauty results anytime via email.
SPECIFICATION:
- Processor: ARM Cortex A7 [Octa Core]
- Memory : eMMC 32GB
- OS :Android 6.01 [ Marshmallow ]
- Image Camera Sensor : Dual Camera Sensor - 1/4 inch Color CMOS [5 Mega Pixel]
X1 Camera Sensor / High Magnification Camera Sensor
- Sensor Pixel : Total Pixel: 5,038,848 Pixel, Effective Pixel:4,915,200 Pixel
- Image Capture Size: VGA: 640(H) X 480(V) / 5 M: 2592(H) X 1944(V)
- LED : Dip LED X8
- Motion : 3 Axis
- Focusing : VCM Auto Focusing / VCM Manual Focusing
- Touch LCD : Type: C-Touch TFT LCD / Size: 4 inch / Resolution: WVGA [480 x 800]
- Battery : Type: Li-Ion / Typical Capacity: 2,000 mAh
- Normal Voltage: 3.7 V
- DC IN Adaptor: 5 V DC / 3 A
- Out Dimension : 62 (W) X 138 (H) X 50 (D) mm (with Skin Lens)
- Weight : About 120 g (with Battery)
- Cradle : Charger / Audio AMP & Speaker
- Display Mirroring : Wi-Fi [Wireless LAN] : Smartphone / Tablet [iOS, android] / PC [Windows, Mac]
1. Full-motion CCTV video at distances up to 450-650m when used with any passive transceiverÂ
2. Up to 1500m with any active UTP video receiver
3. Tool-less, installs in seconds, no need to strip the wires
4. NTSC, PAL, and SECAM video formats
5. No power required
6. 60dB crosstalk and noise immunity
7. Compact size easy installation
8. Frequency Response: DC to 8MHz
9. Attenuation: 0.5dB type
10. CMRR: 60dB
11. Impedance: BNC: 75 Ohms
Terminal: 100 Ohms
12. Working temperature: -10 to + 70°C
13. Storage temperature: -30 to +70°C 1
14. Humidity: 0 to 95%
15. Dimensions: 180*17*15mm
UTP balun features:
  1.BNC-M connector, screw push terminal wire, wired more stable reliable
  2. No power required, simplified project wiring
  3. Plug and play, real-time transmit CCTV video signal, video is clear and stable
  4. Anti-interference, super lighting protection, ESD
1. Full-motion CCTV video at distances up to 450-650m when used with any passive transceiverÂ
2. Up to 1500m with any active UTP video receiver
3. Tool-less, installs in seconds, no need to strip the wires
4. NTSC, PAL, and SECAM video formats
5. No power required
6. 60dB crosstalk and noise immunity
7. Compact size easy installation
8. Frequency Response: DC to 8MHz
9. Attenuation: 0.5dB type
10. CMRR: 60dB
11. Impedance: BNC: 75 Ohms
Terminal: 100 Ohms
12. Working temperature: -10 to + 70°C
13. Storage temperature: -30 to +70°C 1
14. Humidity: 0 to 95%
15. Dimensions: 180*17*15mm
UTP balun features:
  1.BNC-M connector, screw push terminal wire, wired more stable reliable
  2. No power required, simplified project wiring
  3. Plug and play, real-time transmit CCTV video signal, video is clear and stable
  4. Anti-interference, super lighting protection, ESD
Remote Control DC Input Motion Sensor
Motion Sensor Module DC Input
5V/12V DC Input Microwave Motion Sensor Remote Controllable Version
HNS112
5.8GHz C-band microwave, tri-level dimming control.
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:25mA.
Features
5.8GHz C-band microwave, tri-level dimming control.
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:25mA.
0~10V DC output signal.
Super compact, flexible to be integrated into any suitable fixtures.
Dual-PD technology, real Daylight monitoring function for built-in application.
IR remote commissioning, easy setting and user friendly.
Detection range up to 12m in diameter.
Mounting height: 3~6m.
Operation temperature: -20�C~ +70�C.
RoHS compliant.
Settings(Remote control IR12)
Permanent ON/OFF function
Press ON/OFF button, fixture goes to permanent on or permanent off mode, sensor is disabled.
*press "Auto" ,"Reset" or "Ambient learn" to quit this mode.
Dim +/-
Press "Dim" button to automatically dim up or down the light brightness during hold-time from 10% to 100%. Another press to lock it down when desired brightness is achieved.
*after desired brightness is locked down, if user wants to dim again reversely, just press the Dim?? button again and then lock down the new brightness again.
Sensor mode
Press "Auto" button, the sensor starts to work and all settings remain the same as the latest status before the light was switched on/off.
Reset function
Press "Reset" button, all settings go back to factory default settings.
Factory default settings
Sensitivity=100%
Daylight sensor=disable
Hold time=90s
Twilight time=5min
Twilight level=10%
Ambient learn
Press "Ambient learn" button, the latest surrounding lux value overwrites previous lux value learned, and set as the daylight threshold. This feature enables the fixture to function well in any real application circumstance.
Test mode
"Test mode" is for testing purpose only, for users to check the functionality and choose the desired detection range. The sensor goes to test mode automatically after pressing this button.
Users can quit this mode by pressing "ON/OFF", "Reset' or any button of "Hold time". The sensor settings are changed accordingly.
*Test mode defaulted settings
Daylight sensor=disable
Hold time=3s
Twilight time=N/A
Twilight level=N/A
In this mode, when used for on/off control, after motion detected, sensor enters into a cycle of 3s on and 2s off. In this mode, when used for tri-level dimming control, after motion detected, sensor enters into a cycle of 3s on and 2s off(0.5s soft off + 1.5s off).
It is not just an individual working unit to turn On/Off Switch to DC12-48V LED Light 0-100% dimmer, but also a great media to join a smart system via RS485 Modbus-RTU comm. port. It means, no matter for simple group LED lights dimming/control or for complicated smart system control, LC-01 is the best choice in market.
*4-channel designed led light dimmer and controller is using pwm dimming technology to direct drive led lights, 1~5% dimming no flash concern
*each channel max load current 4a (4 channels total output power 768w@48v), with
Protection design against overload, short circuit and surges
*independent working unit, able to extend working units in series for more channels dimming and control demand
*isolate rs 485 and modbus-rtu communication protocal able to connect with hmi tft
Touch panel or smart control system like system chart 4 to dim lighting range from fully off "0" to full-on "1000" for different lighting mode and environment change setting
*4-channel isolate multi-function digital input able to work with existing or general power
On/off switch for light on/off and 0-100% brightness dimming and to connect sensor for
On-off, detain or group dimming setting
*wide working voltage 12-48v dc, to ensure stable and continued electricity supply for led lights to extend the working life of led lights, industrial power supply working source is recommended
*extend ports for remote control or sensor for smart control system
*watchdog function supported
*easy installation and set up, cost-effective, low maintenance cost, long working life of led and environment protection
572 Dc Motion Sensor Tri Level Dimming Hynall Hns102 Suppliers
Short on time? Let Dc Motion Sensor Tri Level Dimming Hynall Hns102 sellers contact you.
