Corrosion Resistant Alloy Casting
Category:Titanium alloy casting
Corrosion Resistant Alloy Casting, the material used is medium and high-strength titanium alloy, the common grades are TC4 etc.
Product Description
Corrosion Resistant Alloy Casting has a wide range of applications and plays an important role in the resource and energy industry. It can be used to manufacture space shuttles, as well as various pressure vessels, fuel tanks, fasteners, instrument straps, frames and rocket casings.
Corrosion-resistant titanium alloys refer to titanium alloys that can withstand various corrosive media and work in them. Pure titanium has extremely strong corrosion resistance, and titanium alloys also have strong corrosion resistance. Based on this, titanium and titanium alloys play an important role in the chemical industry, petroleum refining, metal electroplating equipment and other fields.
In order to improve the resistance to crevice corrosion in some different media, different titanium alloy products have been developed, and this series of products also have a certain high temperature strength, and are widely used in offshore oil fields, seawater desalination and marine biological artificial breeding.
Nickel based corrosion resistant alloy casting
Category:Nickel alloy casting
Nickel based corrosion resistant alloy casting, the deoxidation process is strictly controlled during production. Common grades are N08830 etc.Product Description
Nickel based corrosion resistant alloy casting, the material cost is higher, but the corrosion resistance is very good.It has applications in aerospace, petrochemical, machinery, marine, environmental protection, energy, food and other fields.
Nickel-based corrosion-resistant alloy is based on nickel, plus some other elements, so that it can resist corrosion to a certain extent, generally has austenite structure, common nickel-based corrosion-resistant alloys are nickel-copper alloy, nickel-chromium alloy and many more. Commonly there are NS113, NS131, NS141 and other grades.
Nickel-based corrosion-resistant alloys usually need to withstand the corrosion of atmosphere, water vapor, water and other substances, and most of them have austenite structure. According to different elements added, they have targeted resistance to different substances, such as high temperature chlorine resistance. The total of nickel-copper, hydroxide-resistant nickel-chromium alloy, etc.
Raw melting material - aluminum scraps, cans, engine waste etc.
Output capacity - 5-30 tons/h, customized
Automation - Full automatic/ half automatic (based on output requirement and investment budget
Ingot type - ADC12 (7.5kg/ 10kg / customized)
1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift;
2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing.
Every lot of production need to do testing .
3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water.
4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500
5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
These cast iron skulls are a by-product derived from the cast iron foundries. The byproduct is a ferrous by-product which can be utilised in an electric arc furnace to produce crude steel.
Physical Description
On visual inspection, it appears to be made up of irregular shapes.
The material is separated by magnet and screener.
Packing: Loose in container
Loading: in 20 Container
For further information, please feel free to contact us.
Product Name: 2-Phosphonobutane -1,2,4-Tricarboxylic Acid(PBTCA) 50%
Synonyms : PBTCA 50%
M.F.: C7H11O9PCAS No.: 37971-36-1
Performance
Water Treatment chemical PBTCA, a good corrosion inhibitors, is widely used in circulating cool water system and oilfield water injection system antifouling treatment.
Water Treatment chemical PBTCA is used as a corrosion inhibitor for industrial water treatment. This product has excellent complexing ability with Ca2 +, Zn2 +, Cu2 +, Mg2 +.
The suitable PH range is from 7.0 to 9.5. It can operate at high temperature, high hardness, and high alkalinity conditions.
It allows coolingwater concentration factor increased to seven or more.
98828 Corrosion Resistant Alloy Casting Suppliers
Short on time? Let Corrosion Resistant Alloy Casting sellers contact you.
We are producing only Aluminum Gravity Die Casting for 30 year in Korea
We have a lot of experience about Gravity die Casting
Please make anytime with drawing
Corrosion resistant aluminum castings
Train-sets fitting parts
Terms of delivery: FOB shanghai/Ningbo
Payment condition: TT
Delivery Period: 30days
Packing: Export packing/As per customer's request
We provide Aluminum casting production and processing
More information you can views here
Product Details
Model No: Customized
Material: Aluminum(ZL111 /ZL104/ZL101A/ADC12)
Mould Type: High pressure die/Low pressure die/Gravity casting die
Casting Method: High pressure casting/Low pressure casting/Pouring
Application: Automobile castings/Yacht casting series,/EMU casting series/Airport runway lamps and lanterns series/Socket series/Motorcycle aluminum wheel series and so on
This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel.
Physical Description
On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm
Chemical Composition
Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%.
Packing: Loose in container
Loading: in 20 Container
For further information, please feel free to contact us.
Gremlog Trading DMCC stands at the forefront of the metal recycling industry, offering a meticulously curated selection of carefully sourced and recycled metal scrap solutions. Our comprehensive range includes:
Cast Iron Scrap: Our cast iron scrap, derived from the recycling process, is subjected to thorough quality checks, ensuring its suitability for applications requiring robust and high-performance cast iron.
Aluminium Scrap: Crafted from precise recycling processes, our aluminium scrap adheres to stringent purity standards, ensuring optimal performance in the production of high-quality aluminum alloys.
Steel Scrap: Derived from the efficient recycling process our steel scrap undergoes rigorous processing to meet exacting specifications, guaranteeing consistency and reliability for diverse industrial applications.
Rebars: Our meticulously sorted and processed rebars are characterized by its uniformity and purity, ideal for applications demanding precise metallurgical properties.
Fine Iron Scrap: Engineered for excellence, our fine FE scrap undergoes advanced processing, delivering a product that meets the stringent demands of modern manufacturing processes.
Our cast iron scrap, derived from the recycling process, is subjected to thorough quality checks, ensuring its suitability for applications requiring robust and high-performance cast iron.
The third-generation Hastelloy alloy alloy20 is one of the more commonly used components in the C series. Due to its low nickel content, low cost, excellent mechanical and corrosion resistance, it is widely used in pump flow components where corrosion and wear coexist. The solubility of hardness in the ferrite phase reaches its maximum at 850, and as the temperature increases, the solubility increases rapidly and is much smaller than that of the austenite phase. The Cu content in c-276 has exceeded the high solubility in the ferrite phase.
The Hastelloy alloy alloy20, formed by a large amount of Ni element composition, is used in industries such as chemical engineering, pharmaceuticals, seawater, fertilizers, and other industries for projects with high corrosion resistance requirements due to its unique characteristics that lie between ferrite and austenite structures, and its resistance to intergranular corrosion. In recent years, the nuclear power industry has developed a corrosion-resistant ability in the operation of power station equipment, which cannot be replaced by other materials. Containing a large amount of Cr component, with high oxidation resistance.
The molybdenum element in stainless steel materials is only about 2%, which is far less than the molybdenum content of Hastelloy alloy alloy20. Therefore, high concentration acidity requires the use of materials well. Mainly used, it has the following corrosion resistance properties in oxidation and reduction, and excellent corrosion resistance to most corrosive media. In this oxidizing environment, such as in sulfuric acid manufacturing and solutions containing a large amount of oxidizing ions, it has excellent resistance to pitting corrosion, crevice corrosion, and stress corrosion.
Product name
ALLOY 20 STAINLESS STEEL
Thickness range
0.3mm-3.0mm,
Width range
600mm-1500mm
Length
2000mm, 2438mm, 3048mm
Size
1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required
Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate
Warehouse Storage
Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Incoloy 825 is a nickel iron chromium alloy, which is widely used in petroleum, natural gas and chemical processing industries. It has good corrosion resistance and can operate at higher temperatures than most stainless steels. Incoloy 825 is a completely austenitic nickel iron chromium alloy, stabilized by titanium and added with copper and molybdenum. Incoloy 825 is a general engineering alloy, which is resistant to acid and alkali metal corrosion in oxidation and reduction environments.
The Incoloy825 has the following functions:
Good resistance to stress corrosion cracking.
Good resistance to pitting and crevice corrosion
Good oxidation resistance and non oxidative thermal acidity.
It has good mechanical properties at room temperature and high temperature up to 550
Certification of pressure vessels with manufacturing temperatures up to 450 C
Incoloy 825 metallographic structure:
Incoloy 825 alloy has a stable face centered cubic structure. Chemical composition and appropriate heat treatment ensure that the corrosion resistance will not be weakened by sensitization.
Incoloy825 Corrosion resistance:
Incoloy825 is a general engineering alloy, which is resistant to acid and alkali metal corrosion in oxidation and reduction environments.
Incoloy825 is widely used in various industrial fields where the working temperature is no more than 550.
Typical applications include:
Heating pipes, containers, baskets and chains for sulfuric acid pickling plants.
Seawater cooling heat exchanger, marine product pipeline system, acid gas environment pipeline.
Heat exchanger, evaporator, washing, immersion tube, etc. In phosphoric acid production.
Air heat exchanger in petroleum refining
Food Engineering
chemical process
Flame retardant alloy for high-pressure oxygen
Product name
INCOLOY Alloy 825
Grade
INCOLOY Alloy 825
Thickness range
0.3mm-3.0mm,
Width range
600mm-1500mm
Length
2000mm, 2438mm, 3048mm
Size
1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required
Use of INCOLOY Alloy 825: 1. The heater is generally used in the oil refining unit; 2. Chemical plant equipment pipeline; 3. Fast cooling cylinder for solid solution used in textile industry; 4. Seamless steel pipe for heat exchanger and condenser. 5. High pressure seamless steel pipe for food (gb-2000) is a high-quality carbon structural steel and alloy steel seamless steel pipe suitable for chemical equipment and pipes with working temperature of - 40~400 �° C and working pressure of 10~30ma. 6. Seamless steel pipes for geological drilling and oil drilling control. 7. Cracking pipe for petrochemical industry is used to transport high-temperature and high-pressure fluid on fertilizer equipment.
INCOLOY Alloy 825
Standard
Food Grade Sanitary Tube: JIS G3447, KS D 3585, ASTM A270, EN 10357(DIN 11850), AS 1528.1, ISO 2037(NF A49-249)
Industrial pipe: ASTM A312, EN 10217-7, GB / T 12771-2008, HG 20537.3
Drinking water tube: GB / T 19228
Mechanical tube: ASTM A554, EN 10296-2
Size
Outer Diameter Range: 9.5~2000mm
Thickness Range: 0.5~20mm (Size can be customized.)
Length: Up to 11.8 meters per piece.
Shape Section
Round, square, rectangular
Usage
Sanitary tubing: for food processing industry, beverage industry, sugar mill and so on;
Heat exchanger tube: condenser, boiler, super heater, evaporator and so on;
Industiral pipe: for petroleum delivery, gas delivery, petrochemical industry, wastewater treatment, drainage system, and so on;
Mechanical tube: handrail, railings, balustrade, hence and so on.
Features:
1.Our stainless steel tubes pipes are treated by bright annealing, inside weld bead removing, precise polishing. The roughness of tubes could be under 0.3�¼m.
2.We have the non destructive testing ( NDT ), eg. online eddy current inspection and hydraulic or airtightness testing.
3. Thick welding, good appearance.The mechanical properties of tube could be tested.
4. And Our tubes are certificated by AD 2000-W0, PED 2014/68/EU, ISO 9001 : 2015.
5. Full material traceability is guaranteed during the manufacturing process.
6. Polished tube is supplied in individual plastic sleeves with capped ends ensuring optimum cleanliness.
7. Internal Bore: Tubes have a smooth, clean and crevice free bore.
We supply high-purity Zinc Alloy for industrial applications, ensuring exceptional quality and performance. Our material features a Zinc (Zn) content of 99.999%, with extremely low levels of impurities, making it suitable for critical uses across multiple industries.
Applications:
This high-purity zinc alloy is ideal for:
Electronics and semiconductors
Galvanization processes
Specialty coatings
Advanced alloy manufacturing
Research and development
With our stringent quality controls and reliable delivery network, we ensure that your specific requirements are met with excellence. Contact us for further information or to request a quote.
98828 Corrosion Resistant Alloy Casting Suppliers
Short on time? Let Corrosion Resistant Alloy Casting sellers contact you.
