Metal Content 8%
It's a highly active oxidation catalyst that with strong effect to accelerate the surface drying of paint.
Light smell.
It can improve gloss of paint film.
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills.
It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color.
Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating.
From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list
In particular the mill scale can be classified as follows:
Einecs (european commission no.): 266-007-8
Waste code: 10 02 10
Basel code: b 12 30
Hs code: 2619.00
1.The strongest oxidant and most active drier available.
2. It improves the surface drying and used in conjunction with auxiliary driers in oxidatively air-drying coatings. It is used in combination with lead or zirconium (together with calcium) depending on environmentally friendly formulations, and it improves the surface drying as well as through dry.
3. Common usage levels are between 0.02% to 0.05% based on metal on vehicle solids.
Ginger root
Botanical name: Zingiber officinale Linn.
Family: Zingiberaceae.
Ginger oil and oleoresins are the volatile oil derived by steam distillation of ginger and oleoresin. It is obtained by percolating the powdered rhizomes of Ginger, Zingiber officinale with volatile solvents. Ginger contains 1-2 percent of volatile oil, 5-8 percent of pungent acrid oleoresin and starch. Zingiberene is the chief constituent in the oil of ginger. Oil is employed for flavoring all kinds of food products and confectionary and finds limited use in perfumery. Oleoresin, commercially called Gingerin contains pungent principles viz. gingerol and shogaol apart from the volatile oil of ginger and is used as an aromatic, carminative, stomachic and as a stimulant.
Oleoresin from ginger is obtained conventionally by extraction of dried powdered ginger with organic solvents like ethyl acetate, ethanol or acetone. Commercial dried ginger yields 3.5-10.0 per cent oleoresin. Ginger oleoresin is a dark brown viscous liquid responsible for the flavour and pungency of the spice.
Ginger of commerce or `Adrak` is the dried underground stem or rhizome of the plant, which constitutes one of the five most important major spices of India, standing third or fourth, competing with chillies, depending upon fluctuations in world market prices, world market demand and supply position.
Ginger, like cinnamon, clove and pepper, is one of the most important and oldest spices. It consists of the prepared and sun dried rhizomes known in trade as `hands` and `races` which are either with the outer brownish cortical layers (coated or unscraped), or with outer peel or coating partially or completely removed.
Ginger requires a warm and humid climate. It is cultivated from sea level to an altitude of 1500 meters, either under heavy rainfall conditions of 150 to 300 cm or under irrigation. The crop can thrive well in sandy or clayey loam or lateritic soils.
The composition of dry ginger is given below:
Dry Ginger rootMoisture:6.9 %
Protein:8.6 %
Fat:6.4 %
Fiber:5.9 %
Carbohydrates:66.5 %
Ash:5.7 %
Calcium:0.1 %
Phosphorous:.15 %
Iron:0.011 %
Sodium:0.03 %
Potassium:1.4 %
Vitamin A:175 I.U./100 g
Vitamin B1:0.05 mg/100 g
Vitamin B2:0.13 mg/100 g
Niacin:1.9 mg/100 g
Vitamin C:12.0 mg/100 g
Calorific value:380 calories/100 g.
Ginger Oleoresin is obtained by extraction of powdered dried ginger with suitable solvents like alcohol, acetone etc. Unlike volatile oil, it contains both the volatile oil and the non-volatile pungent principles for which ginger is so highly esteemed. Concentration of the acetone extract under vacuum and on complete removal of even traces of the solvent used, yields the so called oleoresin of ginger. Ginger oleoresin is manufactured on a commercial scale in India and abroad and is in great demand by the various food industries.
Mace
Botanical: Myristica fragrans
Family: N.O. Myristicaceae
Hindi Name: Mace - Javitri
General Description: Nutmeg, spice consisting of the seed of the Myristica fragrans, a tropical, dioecious evergreen tree native to the Moluccas or Spice Islands of Indonesia.
Geographical Sources
The nutmeg tree, Myristica fragrans, is indigenous to the Moluccas in Indonesia but has been successfully grown in other Asian countries and in the Caribbean, namely Grenada. Banda Islands, Malayan Archipelago, Molucca Islands, and cultivated in Sumatra, French Guiana
Composition -> Nutmeg and mace contain 7 to 14 percent essential oil, the principal components of which are pinene, camphene, and dipentene. Nutmeg on expression yields about 24 to 30 percent fixed oil called nutmeg butter, or oil of mace. Dried kernel of the seed.
Varieties -> Whole nutmegs are grouped under three broad quality classifications:
1. Sound: nutmegs which are mainly used for grinding and to a lesser extent for oleoresin extraction. High quality or sound whole nutmegs are traded in grades which refer to their size in numbers of nutmegs per pound: 80s, 110s and 130s (110 to 287 nuts per kg), or 'ABCD' which is an assortment of various sizes.
2. Substandard: nutmegs which are used for grinding, oleoresin extraction and essential oil distillation. Substandard nutmegs are traded as 'sound, shrivelled' which in general have a higher volatile oil content than mature sound nutmegs and are used for grinding, oleoresin extraction and oil distillation; and 'BWP' (broken, wormy and punky) which are mainly used for grinding as volatile oil content generally does not exceed 8%.
3. Distilling: poor quality nutmegs used for essential oil distillation.Distilling grades of nutmegs are of poorer quality: 'BIA' or 'ETEZ' with a volatile oil content of 8% to 10%; and 'BSL' or 'AZWI' which has less shell material and a volatile oil content of 12% to 13%.
Method of Processing -> When fully mature it splits in two, exposing a crimson-coloured aril, the mace, surrounding a single shiny, brown seed, the nutmeg. The pulp of the fruit may be eaten locally. After collection, the aril-enveloped nutmegs are conveyed to curing areas where the mace is removed, flattened out, and dried. The nutmegs are dried gradually in the sun and turned twice daily over a period of six to eight weeks. During this time the nutmeg shrinks away from its hard seed coat until the kernels rattle in their shells when shaken. The shell is then broken with a wooden truncheon and the nutmegs are picked out. Dried nutmegs are grayish-brown ovals with furrowed surfaces. Large ones may be about 1.2 inches long and 0.8 inch in diameter.
Taste and Aroma: Nutmeg has a characteristic, pleasant fragrance and slightly warm taste
4045 Cobalt Octoate 8% (Coating Drier) Suppliers
Short on time? Let Cobalt Octoate 8% (Coating Drier) sellers contact you.
EnzoPlast TS 8 is a Chemically Modified, Vegan, Gluten-Free, Plant- based, Non-GMO oxidized tapioca starch. EnzoPlast TS 8 is characterized by its exceptional functional properties such as low viscosity, high stability, clarity, film forming, low temperature stability and binding properties. EnzoPlast TS 8 is widely used in bakery products, frozen foods, dairy products, confectioneries, breading and coating applications, etc., It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG).
APPLICATIONS
ï?· EnzoPlast TS 8 is used as stabilizer in milk products, ice cream desserts, puddings, fillings, etc.,It is also used in the production of flavoured yoghurts, flavoured milk drinks, whipped cream, low fat cream, etc.,
ï?· EnzoPlast TS 8 can also be used as fat-mimetic and partial replacement of casein in cheese products with improved stretchability and hardness
ï?· EnzoPlast TS 8 is recommended for salad and vegetable sauces, salad dressings, sugar syrups, sauces for canned meat and vegetables, mayonnaise, soups, puddings, fruit filling for confectionery products, jellies, fruit paste candy and soft gummies
ï?· In baking industry, EnzoPlast TS 8 expands and improve physical possessions and physical properties of dough, increases its capability to hold gases
FROZEN FOODS
EnzoPlast TS 8 is used in frozen foods, refrigerated or canned foods, generally for thickening, temperature stability and control the flow in the purpose food. EnzoPlast TS 8 are used for improved adhesion and improved stability, reputedly because of covalent bonding with protein on the substrate surface.
FUNCTIONAL PROPERTIES
EnzoPlast TS 8 forms highly thixotropic pastes with stiff texture, which is related to its gelling capability
Low gelatinization temperature and viscosity, clarity, and soft gel texture are attributes of EnzoPlast TS 8 used in breading and related applications
When heated in water, EnzoPlast TS 8 form clear fluid sols. On cooling, however, the sols made by cooking EnzoPlast TS 8 is more stable or resistant to thickening and forming gels or pastes
EnzoPlast TS 8 is used in formulated products. They also are used in starch batters and in breaded foods, where they improve adhesion of the batter to meat and fish
Gum confections made with EnzoPlast TS 8 have longer shelf life, better gelling characteristics, increased clarity, better taste, and quicker drying
Used in batters and breading for coating various food stuffs, in confectionery as binders and film formers, in dairy products as texturizers
EnzoPlast TS 8 is often used for coating, sealing, batter binding, emulsification, and dough conditioning in baking and other food products.
EnzoPlast TS 8 is a Chemically Modified, Vegan, Gluten-Free, Plant- based, Non-GMO oxidized tapioca starch. EnzoPlast TS 8 is characterized by its exceptional functional properties such as low viscosity, high stability, clarity, film forming, low temperature stability and binding properties. EnzoPlast TS 8 is widely used in bakery products, frozen foods, dairy products, confectioneries, breading and coating applications, etc., It is 100% naturally made which does not have any preservatives and Mono sodium
Glutamate (MSG).
APPLICATIONS
EnzoPlast TS 8 is used as stabilizer in milk products, ice cream desserts, puddings, fillings, etc.,It is also used in the production of flavoured yoghurts, flavoured milk drinks, whipped cream, low fat cream, etc.,
EnzoPlast TS 8 can also be used as fat-mimetic and partial replacement of casein in cheese products with improved stretchability and hardness
EnzoPlast TS 8 is recommended for salad and vegetable sauces, salad dressings, sugar syrups, sauces for canned meat and vegetables, mayonnaise, soups, puddings, fruit filling for confectionery products, jellies, fruit paste candy and soft gummies
In baking industry, EnzoPlast TS 8 expands and improve physical possessions and physical properties of dough, increases its capability to hold gases
FROZEN FOODS
EnzoPlast TS 8 is used in frozen foods, refrigerated or canned foods, generally for thickening, temperature stability and control the flow in the purpose food. EnzoPlast TS 8 are used for improved adhesion and improved stability, reputedly because of covalent bonding with protein on the substrate surface.
FEATURES AND BENEFITS
EnzoPlast TS 8 has improved solubility and paste clarity and could be an alternative source for food products requiring high solid contents without over-thickening
It is highly bio-degradable and causes no harm to the Environment.
EnzoPlast TS 8 is a White powder that adds no color to application and blends well with other ingredients. It has a bland taste and so will not mask flavors or aromas.
Origin: United States
Code: 202597LD
Material: PET Film rolls Clear
Category: PET
Type: Film rolls
Color: Clear
Quantity: 66 Tons
Loading weight: 22 Tons
Specification:"PET Clear Rolls 1/2 Load Will Have a Light Silicone Coating and un coating 50/50 all Rolls . All Clean Rolls On Cores. 8-10 Inches Thick 12 Mic.
Most are 12-18 sharp edge .
Ongoing loads every week 3-5 loads
Not allow for India export"
Thanks for contacting us!
We are selling CFR term, Incoterms 2020. Payment term: 50% advance, balance against copy Bill of Lading
Could you please give us more details about your company and demand for us to offer you the suitable material?
1.What is your company name and address?
2.Have you imported this material before?
3.If yes, which is your port of destination and HS code which you use to import this material?
4.How many tons do you need per month?
5.Which grade and color are you looking for?
6.Do you prefer us to contact you via email or whatsapp, wechat, skype,..?
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Gelatin, E411, CAS no. 9000-70-8, Gelatin is hydrolyzate of collagen, animal beef and pork as raw materials. It is a natural nutritional food thickener. Characteristics: Gelatin can be dissolved in hot water to form a thermally reversible gel, which has extremely excellent physical properties, such as jelly force, affinity, highly dispersed, low viscosity characteristics, dispersion stability, water holding capacity, coating resistance, toughness, and reversibility. As a thickening agent, edible gelatin is widely added in the food industry, like jelly, food coloring, senior fudge, ice cream, cream cheese, yogurt and frozen food.
As an experienced Gelatin manufacturer and supplier, we has been supplying and exporting Gelatin for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.
Gelatin food grade Specification
Gelatin
E No E441
Einecs No 232-554-6
CAS No. 9000-70-8
HS Code 3503001001
ITEM Specifications
Appearance Yellow or yellowish granular
Jelly strength (6.67%) 120 â?? 260 bloom (as per need)
Viscosity (6.67%) 30- 48
Moisture 16%
Ash 2.0%
Transparency (5%) 200- 400mm
pH (1%) 5.5- 7.0
So2 50ppm
Insoluble material 0.1%
Arsenic (as) 1ppm
HEAVY METAL (as PB) 50PPM
Total bacterial 1000cfu/ g
E.coli Negative in 10g
Salmonella Negative in 25g
Paticle size 5- 120 mesh (as per need
PRODUCT INFO
Thai pumpkins are medium to large in size, averaging 8 to 14 pounds, and have a flattened, round to ovate shape. The rind is deeply ribbed, textured, firm, and thin, sometimes covered in a powdery coating. When young, Thai pumpkins are dark green, covered in tan speckles and mottling, and as the pumpkin matures in storage, it transitions into to a uniform tan to light brown hue. Underneath the rind, the flesh is dense, bright orange-yellow, and has a drier consistency, encasing a small central cavity filled with ivory seeds and stringy fibers. Thai pumpkins develop a smooth, creamy, and soft texture when cooked and have a rich, sweet, and subtle, spice-like flavor.Thai pumpkins are a good source of vitamins A and C, which are antioxidants that strengthen the immune system, reduce inflammation, and boost collagen production within the skin. The pumpkins also provide potassium to help balance fluid intake, manganese to activate enzymes in the body, and some fiber to stimulate the digestive tract.
USES
Thai pumpkins, botanically classified as Cucurbita moschata, are large, ridged fruits that grow on a vining plant belonging to the Cucurbitaceae family. The name Thai pumpkin is a general descriptor used to encompass multiple varieties of pumpkins commonly grown in Thailand. Pumpkins have become a favored secondary crop in Thailand and are planted as an additional source of income. The thick-fleshed pumpkins are valued for their resistance to disease, high yields, large size, and easy-to-grow nature. Thai pumpkins are also being cultivated in the United States through exotic farms and in home gardens as a specialty variety. The main variety of Thai pumpkin that is cultivated in both Thailand and the United States is also known as Rai Kaw Tok.
SEASON
Thai pumpkins are available year-round in Thailand.
NEXTAR Creamero Cookies are made from selected ingredients which are processed hygienically to produce soft and delicious soft cookie snacks filled with raspberry jam / coated in chocolate. The combination of a dense texture on the outside and a soft texture on the inside makes this snack taste unique and delicious on the tongue.
Available in 2 variants:
- Richoco
- Richberry
size :
1 ctn/ 8 box/ 10 pcs
Nabati Amo Chocorama Crispy Caramel Chocolate Wafer is a caramel coated wafer, crispy rice and delicious chocolate flavored cream. This wafer is the newest variant from PT. Kaldu Sari Nabati Indonesia, a manufacturer of wafer and biscuit snacks which is well known for its delicious tasting products.
Available in 2 variants:
- chocorama
- caramerama
size : 1 ctn/ 8 box/ 20 pcs
It is used in synthetic resin, adhesive, coating, etc., and also used in the production of herbicide, etc.
1. Pesticides: used in the production of pesticides, etc;
2. Coating: synthetic high-grade automotive paint;
3. Resin: synthesize various adhesives;
4. Papermaking: synthetic paper reinforcing agent;
5. Casting: sanding and film remover, synthetic casting adhesive;
6. Aquaculture: fumigation disinfectant;
7. Organic chemical industry;
8. Others: disinfection, sterilizing agent.
Purity: 96%min.
Origin: Vietnam
Moisture: 8% max
Thickness: 30 - 60 mm.
Length: 10-12m; Width: 1-1.5m
Usage: high-slope regions can benefit from specialized lining, bio-buffer mats, grass planting to stop erosion and landslides, and agricultural usage
Color: Natural Color
Feature: Anti-Bacteria, sustainable, coated with latex on side.
Material: Coconut Fiber
Packaging: each roll is wrapped by straps.
Solid wood (common types include beechwood, walnut, or bamboo)
Non-toxic, eco-friendly finishes or coatings (e.g., natural oil or water-based varnish)
Size:
Individual coaster size: 8 to 10 cm in diameter (approx. 3.1 to 4 inches)
Thickness: 0.5 to 1 cm (approx. 0.2 to 0.4 inches)
Puzzle base size: 15 to 20 cm square or circular when assembled
Design:
Each coaster shaped like an animal (e.g., elephant, bear, fish)
Pieces fit together like a puzzle on the base
Coasters may be flat for drink placement or slightly raised at the edges
Color: Transparent, green , blue, yellow , red ,white etc.
Size:1.22*2.44m 1.5*3m 1*2m etc.
Thickness: 1-200mm or as your request
Packing: based on your requirement
MOQ:1-2 ton
Payment:T/T
Key Features of Acrylic /PMMA
1.Good light transmission.
2.Good weather resistance.
3.Can be molded and reprocessed.
4.Widely usage, easy to dyeing and painting.
5.Non-toxicity.
6.High mechanical strength.
7.Light weight.
8.Good impact strength.
9.Good Insulation feature, widely used for different electrical equipment.
10.Good hard coating and scratch resistance
11.Good chemical resistance, superior to most other plastic materials.
12.Easy to clean and maintain.
The chickpea or chick pea (Cicer arietinum) is a legume of the family Fabaceae, subfamily Faboideae. Its different types are variously known as gram, or Bengal gram, garbanzo or garbanzo bean, Egyptian pea. Its seeds are high in protein. It is one of the earliest cultivated legumes: 7,500-year-old remains have been found in the Middle East.
Types Of Chick Peas
Kabuli : Kabuli Chick peas sizes are 7, 8, 9 and 10mm and hence a very low glycemic index which may make them suitable for people with blood sugar problems. Kabuli Chick peas, which has lighter colored, larger seeds and a smoother coat, mainly grown in Southern Europe, Northern Africa, Afghanistan, Pakistan and Chile, also introduced during the 18th century to the Indian subcontinent. Kabuli (meaning 'from Kabul' in Hindi, since they were thought to have come from Afghanistan when first seen in India) or safed chana is the kind widely grown throughout the Mediterranean. The Kabuli variety has a thin, white seed coat and it is relatively bigger in size than other variety. It is grown in temperate and sub-tropical regions. The Kabuli variety has a thin, white seed coat and it is relatively bigger in size than other variety. It is grown in temperate and sub-tropical regions. Kabuli have large, rounder seeds, weighing about 400mg. They are white to cream colored and are almost exclusively used whole. They are preferred through the Mediterranean region. Kabuli Chick peas is used mainly in salad bars, soups, snack food, vegetable mixes, or ground into hummus. It is widely used in Spain, Algeria, Pakistan, UAE, Saudi Arabia, Jordan, United Kingdom and Italy, Middle Eastern and Mediterranean cuisines.
1.Polyethylene glycol series products can be used in pharmaceuticals. Polyethylene glycol with low relative molecular weight can be used as solvent, co-solvent, O/W emulsifier and stabilizer, used to make cement suspensions, emulsions, injections, etc., and also used as water-soluble ointment matrix and suppository matrix, solid waxy polyethylene glycol with high relative molecular weight is often used to increase the viscosity and solidification of low molecular weight liquid PEG, as well as compensate other drugs; For drugs that are not easily soluble in water, this product can be used as a carrier of solid dispersant to achieve the purpose of solid dispersion, PEG4000, PEG6000 is a good coating material, hydrophilic polishing materials, film and capsule materials, plasticizers, lubricants and drop pill matrix, for the preparation of tablets, pills, capsules, microencapsulations, etc.
2.PEG4000 and PEG6000 are used as excipients in the pharmaceutical industry for the preparation of suppositories and ointments; It is used as a finishing agent in the paper industry to increase the gloss and smoothness of paper; In the rubber industry, as an additive, it increases the lubricity and plasticity of rubber products, reduces power consumption during processing, and prolongs the service life of rubber products.
3.Polyethylene glycol series products can be used as raw materials for ester surfactants.
4.PEG-200 can be used as a medium for organic synthesis and a heat carrier with high requirements, and is used as a moisturizer, inorganic salt solubilizer, and viscosity adjuster in the daily chemical industry; Used as softener and antistatic agent in the textile industry; It is used as a wetting agent in the paper and pesticide industry.
5.PEG-400, PEG-600, PEG-800 are used as substrates for medicine and cosmetics, lubricants and wetting agents for rubber industry and textile industry. PEG-600 is added to the electrolyte in the metal industry to enhance the grinding effect and enhance the luster of the metal surface.
6.PEG-1000, PEG-1500 is used as a matrix or lubricant and softener in the pharmaceutical, textile and cosmetic industries; Used as a dispersant in the coating industry; Improve the water dispersibility and flexibility of the resin, the dosage is 20~30%; The ink can improve the solubility of the dye and reduce its volatility, which is especially suitable in wax paper and ink pad ink, and can also be used in ballpoint pen ink to adjust ink viscosity; In the rubber industry as a dispersant, promote vulcanization, used as a dispersant for carbon black filler.
7.PEG-2000, PEG-3000 are used as metal processing casting agents, metal wire drawing, stamping or forming lubricants and cutting fluids, grinding cooling lubricants and polishes, welding agents, etc.; It is used as a lubricant in the paper industry, etc., and is also used as a hot melt adhesive to increase rapid rewetting capacity.
8.PEG-4000 and PEG-6000 .
9.PEG8000 .
4045 Cobalt Octoate 8% (Coating Drier) Suppliers
Short on time? Let Cobalt Octoate 8% (Coating Drier) sellers contact you.
