Manufacturer: DORRIES
Model: VCE 180
Condition: Very good.
Year of manufacture: 1986 / 2005- complete modernization with new CNC SIEMENS 840 C done by its German manufacturer.
Control: CNC SINUMERIK 840 C
This machine is in us Workstock â?? Rudniki â?? Poland.
Technical details :
Max. turning dia.: 2200 mm
Table diameter: 2000 mm
Max. turning height: 1800 mm
Ram travel: 1500 mm
Main drive: 75 kW
Live spindle: 15 kW
Spindle rotations: 45- 1350 1/min
Max. workpiece weight: 12 000 kg
Working area: Max rotation dia,: 2040 mm
Pallet changer with 3 pallets (turning plates)
Tool magazine:
Right: 8 turning tools
Left: 8 boring/milling tools
Feeds: 0,1-6000 mm/min
Carriage feed:
Vertical: 1500 mm
Horizontal: 1320 mm
Table rotation (2 ranges):
1. 2,5 â?? 70
2. 10-280
Max. table torque: 50 000 Nm
Machine weight: 43 T
Machine height: 6,8 m
Machine width: 10 m
Machine length: 9,7 m
Property Unit
Typical Value
Mass density g/cm 3 0.941-0.959
Melt flow Rate(190 centidegree /2.16kg) g/10min 1.0
Tensile yield strength MPa 19.0
Flexural modulus Mpa 965
Elongation@ break % 400
Impact Embrittlement temperature centidegree MAX -118
Dielectric Constant 100KHZ 2.32
1MHZ 2.31
Loss Tangent 100KHZ MAX 0.0001
1MHZ MAX 0.0001
Volume resistivity OHM-CM MIN 1x10 15
Application
Mainly used for the production of high toughness of the telephone,cable insulation material
LDPE:
Physical Properties Test Method Nominal Value Unit
Density ISO 1183 0.921 g/cm3
Melt Mass-Flow Rate (MFR) ISO 1133 1.9 g/10min
Hardness
Shore Hardness (shore D) ISO 868 45
Mechanical Properties
Tensile Modulus ISO 527-2 175 MPa
Tensile Strength Yield, ISO 527-2 9.0 MPa
Break, 13.0 MPa
Tensile Strain(Break) ISO 527-2 850 %
Modulus of Elasticity Internal Method 250 MPa
Thermal
Vicat Softening Temperature ISO 306/A50 89.0 �°C
Melting Temperature (DSC) DIN 53765 108 �°C
Peak Crystallization Temperature (DSC) DIN 53765 97.0 �°C
Heat of Fusion DIN 53765 110 J/g
Electrical
Volume Resistivity ASTM D257 8.5E+15 ohm â?¢cm
Dielectric Strength ASTM D149 30.0 kV/mm
Dielectric Constant (60Hz) ASTM D150 2.20 %
Dissipation Factor (60 Hz) ASTM D150 0.00050
LLDPE
Properties Test conditon Test method Test data Unit
Density 0.91
MFI 2
Drop impact strength ASTM D-1709 90 g
Elongation ,vertical/horizontal ASTM D-882 600/800 %
tensilestrength,thermal resistance ASTM D-1004 105/95 Kg/cm
elongation ASTM D-638 930 %
tensile strength ASTM D-638 180
tensile strength,vertical/horizontal ASTM D-882 380/350
Vicat softening point ASTM D-1525 103 C
melting point ASTM D-2117 126 C
Turbidity ASTM D-1009 12 %
45 glossness ASTM D-2457 75 %
CNC Lathe Machine
The lathe features:
1. This vertical CNC lathe is a advanced equipment of high performance, widely technology range, high production efficiency. It lathe is apply to machining of all industries. Rough and finish machining of insideï¼?outside cylindrical surface, circular conical surface, end face, grooving, arc surface, sorts of curve face and thread
2. Worktable main spindle adopts high precision and adjustable radial clearance biserial short cylindrical roller bearing to centering to centering. Axial direction adopts CC hydrostatic guideway, worktable have the features of high running accuracy, big bearing capacity, small thermal deformation.
3. The lathe feed adopts AC servo motor, ball screw for drive. Rail head of cross beam equipped with close shield, increase the safety and the amenity
4. The lathe feed adopts AC motor drive, 16 steps main spindle speed change mechanism and realize the worktable range of speed
5. CNC system can select import or domestic according to user needs, CK51A series not have cover housing, CK51B series have cover housing, chip removal and cooling liquid recovery device
6. Vertical column, cross beam guideway all use high-frequnency, quenching, and the quenching hardness is HRC48-55
More information you can views here
Technical specifications:
Specification UNIT CK5108A/B*H/2
Max. turningDiameter Mm 800
Table diameter Mm 720
Max. height of workpiece Mm 800
Max. weight of workpiece T 2
Max. torqueOf table KN.m 20
Range of table speeds r/min 10-315
Max. cutting force of rail head KN 18
Swivel of rail head
Range of feed rates Mm/min 0.1-500
Horizontal travel of railhead Mm 570
Ram travel of rail head Mm 650
Rapid traverse of tool head Mm/min 4000
Elevating speed of cross rail Mm/min 440
Height of tool bar section Mm 30*470
Power of main motor KW 22
Overall dimensions Mm 2080*1820*2730
3580*2300*2730
Weight of machine t 7.2/8.5
CK5112E CNC Vertical Lathe
1. Super-high performance-price ratio and reasonable price.
2. Suspended button station is adopted and the electric cabinet and lathe body are integrated.
3. Hardening beam, hardening T type sliding ram (square sliding ram is optional), together with the sticking plastic guide are adopted.
4. Grade 16 machinery variable speed is taken as the standard configuration, and five-angle tool carrier or square knife station is designed.
5. Siemens 802C system (other systems are optional)
6. Closed protection of beam and automatic lubricating of different lubrication parts.
7. JB/T9934.1-1999 precision inspection of CNC vertical lathe is performed
JB/T9934.2-1999 technical specification of CNC vertical lathe
8. Optional Features: Frequency conversion stepless speed regulation, power-driven tool post and heighten lathe body etc. ance, per fect after-sale service.
813 Cnc Vertical Lathe Dorries Vce 180 With C Axis Suppliers
Short on time? Let Cnc Vertical Lathe Dorries Vce 180 With C Axis sellers contact you.
CK5116E CNC Vertical Lathes
1. Super-high performance-price ratio and reasonable price.
2. Suspended button station is adopted and the electric cabinet and lathe body are integrated.
3. Hardening beam, hardening T type sliding ram (square sliding ram is optional), together with the sticking plastic guide are adopted.
4. Grade 16 machinery variable speed is taken as the standard configuration, and five-angle tool carrier or square knife station is designed.
5. Siemens 802C system (other systems are optional)
6. Closed protection of beam and automatic lubricating of different lubrication parts.
7. JB/T9934.1-1999 precision inspection of CNC vertical lathe is performed
JB/T9934.2-1999 technical specification of CNC vertical lathe
8. Optional Features: Frequency conversion stepless speed regulation, power-driven tool post and heighten lathe body etc.
9. One-year quality assurance, perfect after-sale service.
China CNC Vertical Lathe:
1.The super-high quality and mass remarkably surpass the domestic first-class factories.
2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC�?�50) while the sliding surface of guide is treated with sticking plastic (including inclined veneers and pressure plate). The precision of the product can be maintained for a long time and the cycle for big repair can be extended as long as more than 10 years.
3.EXcellent casting comes from the same factory that the domestic big factories utilize (all are in type of HT300) and the artificial heat ageing is carried out. The casting can never be carried out with weight-reducing treatment, the weight of the whole machine accords with the standard one.
4.five-angle tool carrier adopts high-precision rat gear for positioning and for all 120 pieces, super-strong stiffness. (the traditional five piece positioning plate can be compared with it)
5. 2 axial digital display is taken as the standard confirmation (4 axial digital display type will be exported)
6.The electrics adopt Japan Omron PLC control and the electric components utilize the components with ultra-high quality , specification (CE standard) assembly process, in addition, the electrics of the whole machine owns super-high reliability.
7.ELectric ro sion gear grinding gear and gear grinding spiral bevel (Grade 6 precision) are featured with low noise and stable operation.
9.JB/T4116-96 precision test standard of vertical lathe is performed
JB/3665-96 technical condition of vertical lathe is performed.
10.Advanced and perfect processing and assembly process forge excellent quality.
11.Accessory configuration is complete and only the user prepares for the knife and measuring tool, the operation can be started immediately. Perfect after-sales service (pre-sales, in-sales, after-sales, installation, debugging, training and maintenance etc.) in addition, one-year quality assurance service is granted.
12.Optional configuration: rolling working platform, Germany Mecano button station, heightening lathe and prolonging ram and square ram etc.
More CNC Vertical Lathe:
China CNC Vertical Lathe:
China vertical lathe manufacturer
1.The super-high quality and mass remarkably surpass the domestic first-class factories.
2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC�?�50) while the sliding surface of guide is treated with sticking plastic (including inclined veneers and pressure plate). The precision of the product can be maintained for a long time and the cycle for big repair can be extended as long as more than 10 years.
3.EXcellent casting comes from the same factory that the domestic big factories utilize (all are in type of HT300) and the artificial heat ageing is carried out. The casting can never be carried out with weight-reducing treatment, the weight of the whole machine accords with the standard one.
4.five-angle tool carrier adopts high-precision rat gear for positioning and for all 120 pieces, super-strong stiffness. (the traditional five piece positioning plate can be compared with it)
5. 2 axial digital display is taken as the standard confirmation (4 axial digital display type will be exported)
6.The electrics adopt Japan Omron PLC control and the electric components utilize the components with ultra-high quality , specification (CE standard) assembly process, in addition, the electrics of the whole machine owns super-high reliability.
7.ELectric rotary valve, Grade 16 machinery variable speed make the device convenient, smart and reliable.
8.High-precision gear grinding gear and gear grinding spiral bevel (Grade 6 precision) are featured with low noise and stable operation.
9.JB/T4116-96 precision test standard of vertical lathe is performed
JB/3665-96 technical condition of vertical lathe is performed.
10.Advanced and perfect processing and assembly process forge excellent quality.
11.Accessory configuration is complete and only the user prepares for the knife and measuring tool, the operation can be started immediately. Perfect after-sales service (pre-sales, in-sales, after-sales, installation, debugging, training and maintenance etc.) in addition, one-year quality assurance service is granted.
12.Optional configuration: rolling working platform, Germany Mecano button station, heightening lathe and prolonging ram and square ram etc.
More CNC Vertical Lathe:
China CNC Vertical Lathe:
Vertical Lathe Factory In China
1.The super-high quality and mass remarkably surpass the domestic first-class factories.
2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC�?�50) while the sliding surface of guide is treated with sticking plastic (including inclined veneers and pressure plate). The precision of the product can be maintained for a long time and the cycle for big repair can be extended as long as more than 10 years.
3.EXcellent casting comes from the same factory that the domestic big factories utilize (all are in type of HT300) and the artificial heat ageing is carried out. The casting can never be carried out with weight-reducing treatment, the weight of the whole machine accords with the standard one.
4.five-angle tool carrier adopts high-precision rat gear for positioning and for all 120 pieces, super-strong stiffness. (the traditional five piece positioning plate can be compared with it)
5. 2 axial digital display is taken as the standard confirmation (4 axial digital display type will be exported)
6.The electrics adopt Japan O mron PLC control and the electric components utilize the components with ultra-high quality , specification (CE standard) assembly process, in addition, the electrics of the whole machine owns super-high reliability.
7.ELectric rotary valve, Grade 16 machinery variable speed make the device convenient, smart and reliable.
8.High-precision gear grinding gear and gear grinding spiral bevel (Grade 6 precision) are featured with low noise and stable operation.
9.JB/T4116-96 precision test standard of vertical lathe is performed
JB/3665-96 technical condition of vertical lathe is performed.
10.Advanced and perfect processing and assembly process forge excellent quality.
11.Accessory configuration is complete and only the user prepares for the knife and measuring tool, the operation can be started immediately. Perfect after-sales service (pre-sales, in-sales, after-sales, installation, debugging, training and maintenance etc.) in addition, one-year quality assurance service is granted.
12.Optional configuration: rolling working platform, Germany Mecano button station, heightening lathe and prolonging ram and square ram etc.
More CNC Vertical Lathe:
Our vertical cnc lathe has different design to improve the shortcomings of old design. Simple features are listed:
1)the x and z axis slide ways are all hand scraped with unique moglice(diamond brand)special coated material for perfect & more live.
2)massive hydraulic clamps lock cross rail: the total 800mm stroke of rail travel has evenly divided by 5 positions.
3)15-degree slant bed cross rail design
Lxwxh(mm): 5190x3460x5875
Mass of machine(kg): 28000
Max turning dia. --- 1250 mm
Workingtable dia.---1000 mm
Max height of workpiece --- 1000 mm
Max weight of workpiece --- 3.2 t
Main motor power ---22 kw
Net weight of machine ---8 t.
Max turning dia.---1600 mm
Workingtable dia.---1400 mm
Max height of workpiece --- 1000 mm
Max weight of workpiece --- 5 t
Main motor power ---30 kw
Net weight of machine ---12 t
Cnc system --- fanuc 0.
Inverted vertical cnc lathe
Billon inverted vertical cnc lathe is mainly used in small batch parts processing of various short shaft parts m turning screw thread , arc, cone , interior and exterior surface of solid of revolution , end face , groove enlarge hinge , etc .
Product features:
1.Inverted vertical cnc lathe spindle is vertical parallel to human body standing on the ground , to avoid the main shaft of high-speed rotating inertia ellipse machining and show the precision of approximate circle .
2.Equipped with automatic up-down material clamping materials processing device , the machine can realize automatic production line .
3.One person can operate more than one machine tools , and it is especially suitable of medium and small parts processing .
4.Machine tool can be used for automatic production line . It is easy to compose production units , such as two single axis vertical lathe can form a production line to processing the two side of workpiece at the same time .
With handstand turning processing technology , billon inverted vertical lathe can be done automatically in the process of turning workpiece conveying positioning card all turning processing cutting output process. It solved the develop of turning workpiece product thermal deformation , and can realize the process of automatic docking processing position up and down.
The machine adopts three guide rail structure and has the features of high rigidity and high precision . It can complete the coarse seiko processing requirements at the same time and it can be combined with the driller center of automobile brake drum automatic production line .Compared with the traditional similar equipment , it can realize automated production and machining more working procedure to improve production efficiency and product quality , reduce production costs and labor intensity. It is the batch turning ideal equipment for processing of plate and shell parts , especially for automobile brake drum, and other products .
CNC Lathe Machine
The lathe features:
1. This vertical CNC lathe is a advanced equipment of high performance, widely technology range, high production efficiency. It lathe is apply to machining of all industries. Rough and finish machining of insideï¼?outside cylindrical surface, circular conical surface, end face, grooving, arc surface, sorts of curve face and thread
2. Worktable main spindle adopts high precision and adjustable radial clearance biserial short cylindrical roller bearing to centering to centering. Axial direction adopts CC hydrostatic guideway, worktable have the features of high running accuracy, big bearing capacity, small thermal deformation.
3. The lathe feed adopts AC servo motor, ball screw for drive. Rail head of cross beam equipped with close shield, increase the safety and the amenity
4. The lathe feed adopts AC motor drive, 16 steps main spindle speed change mechanism and realize the worktable range of speed
5. CNC system can select import or domestic according to user needs, CK51A series not have cover housing, CK51B series have cover housing, chip removal and cooling liquid recovery device
6. Vertical column, cross beam guideway all use high-frequnency, quenching, and the quenching hardness is HRC48-55
More information you can views here
Technical specifications:
SpecificationUNITCK5108A/B*H/2
Max. turningDiameterMm800
Table diameterMm720
Max. height of workpiece Mm800
Max. weight of workpiece T2
Max. torqueOf tableKN.m20
Range of table speedsr/min10-315
Max. cutting force of rail headKN18
Swivel of rail head
Range of feed ratesMm/min0.1-500
Horizontal travel of railheadMm570
Ram travel of rail headMm650
Rapid traverse of tool headMm/min4000
Elevating speed of cross railMm/min440
Height of tool bar sectionMm30*470
Power of main motorKW22
Overall dimensionsMm2080*1820*2730
3580*2300*2730
Weight of machinet7.2/8.5
CK5123E CNC Vertical Lathe in china
1. Super-high performance-price ratio and reasonable price.
2. Suspended button station is adopted and the electric cabinet and lathe body are integrated.
3. Hardening beam, hardening T type sliding ram (square sliding ram is optional), together with the sticking plastic guide are adopted.
4. Grade 16 machinery variable speed is taken as the standard configuration, and five-angle tool carrier or square knife station is designed.
5. Siemens 802C system (other systems are optional)
6. Closed protection of beam and automatic lubricating of different lubrication parts.
7. JB/T9934.1-1999 precision inspection of CNC vertical lathe is performed
JB/T9934.2-1999 technical specification of CNC vertical lathe
8. Optional Features: Frequency conversion stepless speed regulation, power-driven tool post and heighten lathe body etc.
9. One-year quality assurance, perfect after-sale service.
CK5123E CNC Vertical Lathe in china
1. Super-high performance-price ratio and reasonable price.
2. Suspended button station is adopted and the electric cabinet and lathe body are integrated.
3. Hardening beam, hardening T type sliding ram (square sliding ram is optional), together with the sticking plastic guide are adopted.
4. Grade 16 machinery variable speed is taken as the standard configuration, and five-angle tool carrier or square knife station is designed.
5. Siemens 802C system (other systems are optional)
6. Closed protection of beam and automatic lubricating of different lubrication parts.
7. JB/T9934.1-1999 precision inspection of CNC vertical lathe is performed
JB/T9934.2-1999 technica l specification of CNC vertical lathe
8. Optional Features: Frequency conversion stepless speed regulation, power-driven tool post and heighten lathe body etc.
9. One-year quality assurance , perfect after-sale service.
YM-CK5112Epro CNC vertical lathe
1. The product is in Pro version with professional design, being an improved product with a huge market sales volume. CK5112Epro and CK5116Epro adopt the identical modules (identical beam section, beam slide base, rotary slide base, ram, servo motor and servo driver) which are extremely suitable for heavy-load cutting�??
2. The working platform owns the function of waterproof and it is not necessary to worry that cutting fluid infiltrates into it. The design of square shaped working platform facilitates the collection of cutting fluid.�??
3. Siemens 802DSL system (user can appoint other system) is adopted; servo motor and servo driver all utilize Siemens products.
4. Beam guiding surface is conducted with supersonic frequency quenching treatment (higher than HRC50) with the characteristics of durable service; the square ram adopts ductile iron material (QT600) while the sliding surface is sticking with the soft plastics belt, which can prolong more the overhauling period for over 10 years.
5. The independent electric cabinet is equipped with air conditioner for refrigerating, which prolongs the reliability and service life of the electric parts significantly, facilitates repair
and maintenance, and is free from the influence of machine vibration.
6. P3 high-precision lead screw produced by Nanjing Process or Taiwan HIWIN (P1 is the highest and P6 is the lowest degree), and imported bearing support.
7. The beam is protected by the white steel, and all the lubrication parts are supplied with certain amount of oil by the automatic lubricating pumps regularly.
8. Four-grade machine variable speed + motor stepless variable speed, wide range of constant power and large torque.
9. JB/T9934.1-1999 precision inspection of CNC vertical lathe is performed
 JB/T9934.2-1999 technical specification of CNC vertical lathe
10. Owning constant line speed turning, cutting thread and other functions
11. High-precision transmission gear (6 grades) and high-precision spiral bevel gear (6 grades) with low noise and high rotary precision.
12. All the castings are made of HT300 grey cast iron (ram is made of ductile iron) which is treated with artificial heat ageing, high-quality processing and improved assembly process. All the functional parts and electric parts are in high quality with high reliability.
13. Complete fitting configuration allows the user to put into operation only by preparing cutting tool and measuring tool. The improved after-sales service and 2-year quality assurance service are available.
14. Optional parts: Germany Mecano button station, constant flow hydrostatic guideway, oil temperature icebox, constant temperature refrigerator, grating closed loop, heighten lathe body, lengthen ram etc.
YM-CK5116Epro CNC vertical lathes
1. The product is in Pro version with professional design, being an improved product with a huge market sales volume. CK5112Epro and CK5116Epro adopt the identical modules (identical beam section, beam slide base, rotary slide base, ram, servo motor and servo driver) which are extremely suitable for heavy-load cutting�??
2. The working platform owns the function of waterproof and it is not necessary to worry that cutting fluid infiltrates into it. The design of square shaped working platform facilitates the collection of cutting fluid.�??
3. Siemens 802DSL system (user can appoint other system) is adopted; servo motor and servo driver all utilize Siemens products.
4. Beam guiding surface is conducted with supersonic frequency quenching treatment (higher than HRC50) with the characteristics of durable service; the square ram adopts ductile iron material (QT600) while the sliding surface is sticking with the soft plastics belt, which can prolong more the overhauling period for over 10 years.
5. The independent e lectric cabinet is equipped with air conditioner for refrigerating, which prolongs the reliability and service life of the electric parts significantly, facilitates repair and maintenance, and is free from the influence of machine vibration.
6. P3 high-precision lead screw produced by Nanjing Process or Taiwan HIWIN (P1 is the highest and P6 is the lowest degree), and imported bearing support.
7. The beam is protected by the white steel, and all the lubrication parts are supplied with certain amount of oil by the automatic lubricating pumps regularly.
8. Four-grade machine variable speed + motor stepless variable speed, wide range of constant power and large torque.
9. JB/T9934.1-1999 precision inspection of CNC vertical lathe is performed
 JB/T9934.2-1999 technical specification of CNC vertical lathe
10. Owning constant line speed turning, cutting thread and other functions
11. High-precision transmission gear (6 grades) and high-precision spiral bevel gear (6 grades) with low noise and high rotary precision.
12. All the castings are made of HT300 grey cast iron (ram is made of ductile iron) which is treated with artificial heat ageing, high-quality processing and improved assembly process. All the functional parts and electric parts are in high quality with high reliability.
13. Complete fitting configuration allows the user to put into operation only by preparing cutting tool and measuring tool. The improved after-sales service and 2-year quality assurance service are available.
14. Optional parts: Germany Mecano button station, constant flow hydrostatic guideway, oil temperature icebox, constant temperature refrigerator, grating closed loop, heighten lathe body, lengthen ram etc.
CNC Double Column Vertical Lathe:
1.The super-high quality and mass remarkably surpass the domestic first-class factories.
2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC�?�50) while the sliding surface of guide is treated with sticking plastic (including inclined veneers and pressure plate). The precision of the product can be maintained for a long time and the cycle for big repair can be extended as long as more than 10 years.
3.EXcellent casting comes from the same factory that the domestic big factories utilize (all are in type of HT300) and the artificial heat ageing is carried out. The casting can never be carried out with weight-reducing treatment, the weight of the whole machine accords with the standard one.
4.five-angle tool carrier adopts high-precision rat gear for positioning and for all 120 pieces, super-strong stiffness. (the traditional five piece positioning plate can be compared with it)
5. 2 axial digital display is taken as the standard confirmation (4 axial digital display type will be exported)
6.The electrics adopt Japan Omron PLC control and the electric components utilize the components with ultra-high quality , specification (CE standard) assembly process, in addition, the electrics of the whole machine owns super-high reliability.
7.ELectric rotary valve, Gra de 16 machinery variable speed make the device convenient, smart and reliable.
8.High-precision gear grinding gear and gear grinding spiral bevel (Grade 6 precision) are featured with low noise and stable operation.
9.JB/T4116-96 precision test standard of vertical lathe is performed
JB/3665-96 technical condition of vertical lathe is performed.
10.Advanced and perfect processing and assembly process forge excellent quality.
11.Accessory configuration is complete and only the user prepares for the knife and measuring tool, the operation can be started immediately. Perfect after-sales service (pre-sales, in-sales, after-sales, installation, debugging, training and maintenance etc.) in addition, one-year quality assurance service is granted.
12.Optional configuration: rolling working platform, Germany Mecano button station, heightening lathe and prolonging ram and square ram etc.
More CNC Double Column Vertical Lathe: China Vertical Lathe.
KHODIYAR INDUSTRIA PVT LTD is an ISO-9001:2015 certified Hot Forging & Machined Components manufacturing facility produce all grades of Brass, Copper & Alloys, Aluminium & Alloys, Carbon Steels, Alloy Steels & Stainless Steel in the weight range of 50 GMS to 35KG as a single part to suit your production requirements.
We were established in 2014 & produce Forged & Machined components for OEMs in Heavy Engineering, Pump, Valve, Wind turbine, Automotive, Electrical, Aerospace Industry, Oil, Power & Gas, Material Handling, Construction & Mining Equipments, Defense etc., to list a few applications.
Our Forge shop includes :
