Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills.
It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color.
Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating.
From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list
In particular the mill scale can be classified as follows:
Einecs (european commission no.): 266-007-8
Waste code: 10 02 10
Basel code: b 12 30
Hs code: 2619.00
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag
- European Code: 19.12.01
- Basel Code: B1010
- HS Code: 2619.0020
- Quantity: 2000 tons currently available
- Monthly quantity: 500-1000 tons depending on production
- Size: 350 1200 mm
- Fe content: from 77 to 86%
- C content: above 2,5-3%
- Bulk density: 2,8-3,4 tons/m3
- Loading type: loose in 20 (26-27 tons on average)
The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring.
Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.
Please feel free to contact us for further details
The manufacture of both granulated and powdered garlic is the same, except for the grinding or powdering process. Granulated garlic is coarse while garlic powder is ground extra fine.
Whole cloves of garlic are peeled, cleaned and then sent into a machine that slices and chops them into smaller sections. The sections are dried in slow ovens for three to four hours. When the garlic has cooled it is ground to the desired consistency, be it granulated or powdered. The finished products are put through sifters to separate any debris or undesirable pieces. Both are packaged in air-tight containers and stored in a cool, dry place.
Granulated and powdered garlic are used to season and enhance the flavor of many foods. Often it is an appropriate substitute when fresh garlic is called for in a recipe. Powdered garlic dissolves almost instantly when incorporated into any dish, hot or cold. Granulated garlic takes a few minutes to become incorporated and release its flavor.
We can offer Garlic Granules in 0.5mm to 1.0mm, 40/60 mesh, 26/40 mesh
- 20 FCL: 10 Mt (Flakes/Cloves), 14-15 Mt (Minced/Granules/Powder)
- 40 FCL H/C: 20 Mt (Flakes/Cloves), 25-30 Mt (Minced/Granules/Powder)
Product Packing
- 12.5/13/14 Kg Paper Bag inside 1 Poly Bag
- 20/25 Kg Cartoon inside 1/2 Poly Bag
- 20/25 Kg Cartoon inside 1/2 Aluminium Foil Bag
We are engaged in wide range of Copper Ore Lumps. We are a renowned manufacturer and exporter of an impeccable Copper Ore Lumps, Known for their high efficiency and durability, these copper ore lumps are easily available in different dimensions, sizes and can be customized as per the demand of our esteemed clients.
Copper Ore We are reckoned as one of the most outstanding Copper Ore Suppliers in the nation.
We offer an inexplicable range of copper ore that are obtained from best Copper Ore Mines of the country.
Additional Information:
Item Code: KBT-MD-002
Minimum Order Quantity: 100 ton
Port of Dispatch: Surat, Gujarat
Production Capacity: 10000 Ton
Delivery Time: 10 Day After confirmation
Packaging Details: As per customer requirement.
Product Name:Aluminum sulfate
Molecular Formula:AL2(SO4)3
Hs Code:2833220000
CAS Code:10043-01-3
Standard:HG2225-2010
Shape:flake, powder, 2-4cm lump and 2-5mm/3-8mm granular
Properties:There are two types,anhydrous aluminium sulphate and aluminium sulphate octadecahydrate. In normal condition , it is AL2(SO4)3�·18H2O; AL2(SO4)3�·14H2O after efflorescence, can be white powder , glittering flaky or crystalline flakes, odorless, sweet to slight bitter.
Use:Sewage Treatment, treatment of drinking water, Sizing of paper , Cement Additive.
Specifications
Item name Standard
AL2O3 15.6% 16.5% 17%
Fe2O3 0.5 % Â 0.005 % 0.004%
PH value 3.0 3.0 3.0
Water insoluble matter 0.2% 0.04% 0.03%
Packing 25kg or 50kg or 1000kg in plastic lined woven bag
Shape:flake, powder, 2-4cm lump and 2-5mm/3-8mm granular
Properties:There are two types,anhydrous aluminium sulphate and aluminium sulphate octadecahydrate. In normal condition , it is AL2(SO4)3 18H2O; AL2(SO4)3 14H2O after efflorescence, can be white powder , glittering flaky or crystalline flakes, odorless, sweet to slight bitter.
Use:Sewage Treatment, treatment of drinking water, Sizing of paper , Cement Additive.
Specifications
Item Name Standard
AL2O3 15.6% 16.5% 17%
Fe2O3 ¤0.5 % 0.005 % 0.004%
PH value .0 3.0 3.0
Water insoluble matter 0.2% 0.04% 0.03%
Packing 25kg or 50kg or 1000kg in plastic lined woven bag
Formula:KAl(SO4)2 12H2O
Relative Molecular Weight:474.39
CAS NO,: 7784-24-9
EINECS No.:5637-689-7
HS CODE.: 2833301000
Appearance: lump, white crystal, white powder
Properties:Colorless, transparent, particle or crystalline powder, odorless, nontoxic, tastes slightly sweet and puckery, astringent, easily soluble in water, its water solution appears acid,is would lose crystal water and become white powder on heating
Usage;
Food industry: Buffering agents and leavening agents in food-grade products.
Chemical Industry: Water Flocculant, aluminum tanning agents and after-treating agents for leather tanning in the leather industry, dyeing agents,Astringents,mordants etc.
Commodity : Potassium sorbate
Molecular formula : C6H7KO2
Molecule Weight : 15022
HS code : 29161900
CAS : 24634615Ã?Â
Specifications
appearance : White crystal granule
Production Standard : FCCIV
Content : 9801010
K2CO3 : 1 max
Loss on drying : 1 max
Chloride : 001 max
Heavy metalsas : Pb 0001 max
Packing in carton 25kgs net weight
Quantity 14MT loaded into 1 x 20GP
Excellent preservative properitesproperites Sorbic Acid Potassium Sorbate can restrain effectively the activity of mould yeast and aerophile bateria Restrain growth and reproduction of the pernicious micro organism as pseudomonas staphylococcus salmonella action to restrain growth is more powerful than killing Meanwhile it can not restrain useful microoranganim growth ad Anaerobicbearing barilli acidophil therefore to lengthen food store peroid and remain food original flavor The preservative efficiency of sorbic acid Potassium sorbate is 510 times sodium benzoate
High safety Sorbic Acid Potassium Sorbate is one kind of nonsuturated fatty acid compounds It can be absorbed by human body rapidly then decomposed into CO2 and H2Omoreover no remaining in body ADI 025mgkg based on sorbic acid FAOWHO 1994 LD50 4920 mgkglarge mouse by mouth GRASFDA 1823640 1994 Its toxicity only 112 times table salts and 140 times sodium benzoate
Good stability Sorbic Acid Potassium Sorbate is stable in sealed staus will not be decomposed until 270C It will be oxidized into colored ones and absorbing moisture in case exposed in air for a long time
Wide application At the momentSorbic Acid Potassium Sorbate has been used extensively in food drinkvegetables in soy tabacco drugs cosmetics agricultural products forage and other domain Its applicaion should be wide and wide in the world
As acidic preservative Sorbic Acid Potassium Sorbate is also used well in neutral foodph6065 The preservative efficiency of sodium benzoate will decrease clearly and have a bed taste while ph4
Applicaion flexibilitySorbic Acid Potassium Sorbate can be used by direct adding sprayingretting dry spraying using in packing material and other method
Product Physical Properties
WHITE POWDER CRYSTAL, SPECIFIC GRAVITY IS 1.586, IT CANDISSOLVE IN WATER, BUT CANT DISSOLVE IN ALCOHOL AND ACETINE.
Specifications:
Appearance: white free-flowing crystalline powder without agglomeration
Purity as Ammonium Bicarbonate ,% by weight 99.5 (minimum)
Chloride (as Cl), % by weight 0.20(maximum)
Sulphates (as SO4),% by weight 0.10(maximum)
Iron (as Fe), % by weight 0.004(maximum)
Nonvolatile matter, % by weight 0.10(maximum)
Heavy metals (as Pb), ppm 2.50(maximum)
Copper (as Cu), ppm 5.0(maximum)
Arsenic (as As), ppm 0.6(maximum)
Tarry matter To pass test
Oil Content Less than 10 ppm
Melamine Content NIL
USAGE
BAKING FOODS SUCH AS CRISP CAKE, BISCUIT ETC. IN ADDITION, ITALSO WIDELY USED IN CHEMICAL FIELD SUCH AS FLOUR BRIGHTENING AGENT,RARE EARTH DEEP PROCESSING, MEDICINE MIDBODY, PLASTICS PROCESSING,ELECTRONIC ELEMENT ETC.
PACKING
OUTSIDE IS WEAVE BAG OR PAPER BAG, INSIDE IS FOOD PLASTICSBAG, 25KG/BAG. THE PACKING ALSO CAN ACCORDING TO CONSUMERS REQUEST.
Vopak to Vopak deals prices EN590 10 ppm US$ 540/MT, Jet fuel A1 is $82/bbl
Procedure as follows:
*VOPAK TO VOPAK*
*ROTTERDAM ð??³ð??± HOUSTON ð??ºð??¸*
ð??¢ï¸? *EN590 10PPM*
NON SANCTIONED
*PRE QUALIFICATION STEPS*
1. Buyer to provide CIS
2. Upon acceptance, Seller details will be provided for issuance of ICPO
*PROCEDURE*
1. BUYER to issue ICPO addressed to SELLER for verification and approval
2. SELLER to issue CI. BUYER signs and returns CI within 24 hours
3. SELLER to issue Authorization to BUYER for BUYER's Vopak Terminal Manager to communicate with SELLER's Vopak Terminal Manager to verify the existence of the products.This is to allow BUYER to verify fuel is real
4. After confirmation from BUYER's Vopak Terminal Manager, BUYER's Vopak Terminal Manager submits below documents to SELLER's Vopak Terminal Manager:
* Vopak Terminal Agreement or Vopak Reference Code
* Vopak Barcode
5. BUYER finalizes the Vopak Terminal Protocols
6. SELLER to issue Full POP documents to BUYER's Vopak Terminal Manager and injection begins
7. Upon completing the injection, BUYER makes full payment via MT103 TT and SELLER transfers title to BUYER
8. SELLER pays commission to its own intermediaries until the Contract is complete along with all rolls and extensions.
Overview Quick Detail :
Style: Dried and Fresh ; Color: Brown Yellow, Beautiful nature brown; Moisture content : 5-10% ; Impurity : 1 % Max ; Class : AAA, Processing Type : Raw
Supply ability : 50 Metric Ton / Metrics Tons per month
Packaging & Delivery :
- 10 kg per carton or 25 kg mesh bags / pp bags or as per buyers request
- Port : Tanjung Mas, Tanjung Perak, Tanjung Priok and etc
-Origin: Vietnam
-Commodity: dried basil seed
-Moisture: 10% max
-Impurity: 1% max
-Yellow seeds: 5% max
-Hs code: 12079990
-Packing: 25kgs/PP bag with PE bag inside
Name: Rattan Core
Material: Natural Rattan 100%
Color: White off or we can dye per customer's request
Size: Diameter: from 1.5mm to 10mm
Packing: standard is 12.5kg/bundle
Usage: making rattan webbing cane
Length: minimum of 3 meters
Hs code: 46021200
MOQ: 100kgs
RATTAN CORE
Specification:
Name: Rattan core
Material: Natural Rattan 100%
Color: White off or we can dye per customer's request
Size: Diameter: from 1.5mm to 10mm
Kind of rattan: Sega rattan and lunty rattan
Packing: standard is 12.5kg/bundle
Usage: making rattan webbing cane ...
Length: minimum of 3 meters
Hs code: 46021200
Product Name - Rattan Webbing Cane
Type- Natural or Bleached
Style - Open, square or Closed Webbing or as client's requirements
Size - 45cm/60cm/70cm/90cm*15m
Material - Rattan or Wicker
Use - Making furniture, tables, chairs, sofas, home and hotel decor items, baskets, trays, lampshades, etc.
HS code - 46021200
Payment - TT or LC, Western Union
Place of Origin - Vietnam
10141 Cloves Hs Code 0907 10 00 Suppliers
Short on time? Let Cloves Hs Code 0907 10 00 sellers contact you.
