Please click here to check who's online and chat with them.

Find Verified Closed Cup Flash Point Tester Suppliers, Manufacturers and Wholesalers

Jun-01-16
 
Place of Origin: Chongqing, China (Mainland)
Brand Name: TOP
Model Number: ACD-3000I
Power: Electronic
Usage: Auto Testing Machine
Type: Fully Automatic Oil Acidity Tester
Condition: New
Method of Display: 7 inch color LCD
Testing Range: 0.0005~0.5000mgKOH/g
Power supply: 220V±10%,50Hz±5%
Environmental Humidity:
May-28-11
Supplier From Chongqing, China
 
Purpose
The instrument is designed and made as per the National Standard GB/T3536 ¡°Test Methods for Flash Point and Fire Point of Petroleum Products (Cleveland Open Cup Methods), and T0651 ¡°Asphalt Flash Point and Fire Point Test (Cleveland Open Cup Methods)¡± in the Industry Standard JTJ052 Specification and Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering. It is used to determine flash point of petroleum products and bituminous materials, excepting fuel oil and materials having a flash point of lower than 79 ¡æ.

Adopt microprocessor techniques and equipped with advanced system software, it can control temperature, apply flame, ignite, detect flash point, and print out test data automatically. It has a 6 digits display. 4 digits for temperature display and the other 2 digits for time display.

Technical parameters
(I) Operation condition
1. Ambient temperature: 20¡À5¡æ
2. Relative humidity: < 80%
3. Power supply: AC 220V¡À10£¥, 50¡À1Hz
(II) Temperature measurement
1. Measurement range: ambient temperature~350¡æ
2. Test accuracy: 0.2%
3. Resolution: 0.1¡æ
4. Repeatability:
(1) Flash point is lower than 150 ¡æ: error is less than 4 ¡æ
(2) Flash point is higher than 150 ¡æ: error is less than 6 ¡æ
(III) Basic parameters:
1. Speed rising speed: as per GB/T 3536-83
2. Ignition mode: By a gas flame (4 mm)
3. Total power consumption: not more than 400 W.
May-28-11
Supplier From Chongqing, China
 
The instrument is designed and made as per GB/T261 ¡°Test Methods for Flash Point of Petroleum Products (Closed Cup Methods)¡±. It is used to determine the lowest temperature of a petroleum product sample when the mixture of sample vapor and air around the sample contacts flame and flashes when heated in a closed cup under stipulated condition. The lowest temperature is the flash point of the petroleum product sample. The instrument has function of automatic program temperature controlling, automatic barometric pressure modification, and modified value calculation. It can automatically control measurement procedures and test data, and it can also save, analyze and print out test data.

Technical parameters
1. Power supply: AC 220V¡À10%, 50Hz.
2. Temperature measurement:
(1) Measurement range: ambient temperature~250
(2) Flash point is lower than 104 ¡æ, error is 2
Flash point is higher than 104 ¡æ, error is 6
(3) Resolution: 0.1
(4) Precision: 0.5%
3. Basic parameters:
(1) Temperature rising rate: as per GB/T261
(2) Ignition mode: gas flame is 3~4©L
4. Ambient temperature: 10~40
5. Relative humidity: ¡Ü80£¥
6. Total power consumption: not more than 350 W.
Jun-10-21

Automatic Closed Cup Flash Point Tester

$770 - $15.40K
MOQ: Not Specified
 
Automatic Closed Flash Point Tester used to measure the Closed flash point value of petroleum products.Advanced foreign technology is adopted. LCD TET's pure color touch screen displays the man-machine dialogue interface in Chinese. For parameters such as prevalue temperature oil test label atmospheric pressure and test date it has prompt menu prompt input which is convenient and fast.It is an ideal substitute for imported instruments.Widely used in railway aviation electric power petroleum industry and scientific research departments.
Mar-30-20
Supplier From Dalian, China
 
DSY-202ZA is the second generation instrument that is designed according to GB/T261 and ASTM D93; it is suitable to the determination of flash point of petroleum products automatically.
Characteristic:
1. Igniting method can be by electricity and gas option.
2. MCU controlled, igniting, detecting and judgment of flash point, printing automatically, Touch screen display.
3. Display test status in real time
4. Set the expected flash point, the highest flash point, ignition times, detection sensitive
5.Built-in barometer pressure sensor, it can be calibrated barometer pressure in test result according to the measure barometer pressure
6. Automatic lifts arm to the complete upright position after testing
7.Easy to remove the detection device by hand, and easy to repair and clean
8. The sliding plate that is on the test cup cover, which can be removed easily, and can be cleaned each time, make the result more accuracy
3686 Closed Cup Flash Point Tester Suppliers
Short on time? Let Closed Cup Flash Point Tester sellers contact you.
Dec-26-19
 
DSY-202ZA is the second generation instrument that is designed according to GB/T261 and ASTM D93; it is suitable to the determination of flash point of petroleum products automatically.
Characteristic:
1. Igniting method can be by electricity and gas option.
2. MCU controlled, igniting, detecting and judgment of flash point, printing automatically, Touch screen display.
3. Display test status in real time
4. Set the expected flash point, the highest flash point, ignition times, detection sensitive
5.Built-in barometer pressure sensor, it can be calibrated barometer pressure in test result according to the measure barometer pressure
6. Automatic lifts arm to the complete upright position after testing
7.Easy to remove the detection device by hand, and easy to repair and clean
8. The sliding plate that is on the test cup cover, which can be removed easily, and can be cleaned each time, make the result more accuracy
Jul-30-15
 
Scope of application
For flash and Fire points of all petroleum products, except fuel oils and those having an open cup flash below 79 C (175F).
Benefits
- Conforms to ASTM D92 and related specifications
- For flash points above 79 C (175F)
Function characteristics
1,english operating software prompts;
2, with the experimental date, test time parameter prompts;
3, automatic correction of atmospheric pressure and calculated correction values;
4 differential detection, automatic correction system deviation;
5, scan, ignition, detection, print test data computer is done automatically;
6, electronic ignition, the gas flame, forced air cooling detection of anti-fuel;


standard wooden case
Oct-24-16
 
Scope
Standard ASTM D93, GB / T261-83 and ISO2719-1988 international standards.

Features
1, large-screen LCD, friendly user interface
2, also has a fault of Jane function, automatic fault prompts
3, automatic temperature control, automatic lid opening and ignition, automatic print, automatic cooling, automatic air pressure correction is completed and the machine automatically displays the flash point temperature, built-in mini thermal printer to automatically report the test results
4, using USB / 232 communication interface to communicate with the host machine, a centralized management system for easy composition
5, from Germany imported stainless steel temperature sensor for detecting the temperature data is accurate and reliable
6, mechanical moving part of the servo-driven belt drive, work without gaps, low noise, reliable easy to damage, no lubrication maintenance.
7, just set the expected flash point, the instrument automatically in strict accordance with the standard test, the test ends automatically print test results, and there is a tone. Without judgment and do not rely on the operator's proficiency.
8, thermocouple detection sensitivity high detection accuracy, durability and easy maintenance.
9, sample box with built-in cooling mode heating thermostat thermal compound, and the use of German imports whisk Dan Adams compressors, thermostats no lag reliable, easy to damage

Technical Parameters
1. Environment: Temperature 0 ~ 60 ? Relative humidity: = 80%
2, Display: large-screen LCD
3, heating rate: less than 50 ? 1 ? / min, higher than 50 ? 2-3 ? / min
4, temperature range: -30 ~ + 80 ?, accuracy ± 1 ?
5, the temperature measurement element: PT100 stainless steel temperature sensor
6, the ignition: gas flame ignition
7, Detection: Automatically detects a flash fire and automatically print test data.
8. Communication: USB / 232 communication interface.
9, cooling system: compressor cooling
10, print: You can print the results of this experiment or any print storage
11, using the power AC220V 50Hz, the total power: 1.5 kw
GOLD Member
VERIFIED
Jul-09-22

Instant Jam Mix

$250 - $1.10K
MOQ: 500  Kilograms
Sample Available
Supplier From Erode, Tamil Nadu, India
 
Take 100gms of instant jam mix in a vessel and add 150ml of water(For 1 cup of jam mix 1 1/4cup of water). Mix well without lump formation.
Boil the mix for 5 mins and reduce the burner level to simmer.
Hold it for 5 minutes without stirring or until it reaches setting point of 1040C at low flame. Allow the jam mix to cool. Transfer the mix to sterilized container.
GOLD Member
VERIFIED
Jun-28-21
Supplier From Faridabad, Haryana, India
 
We are supplier and exporter of Paraffin Oil.

Light Liquid Paraffin Oil IP is highly purified mixture of liquid saturated hydrocarbons obtained from petroleum and is highly paraffinic in nature. Light Liquid Paraffin oil is transparent & free from fluorescence in daylight. It is colourless, tasteless, and odourless when cold. Light liquid paraffin oil IP highly refined hydro-treated oil has excellent thermal & chemical stability, having high flash point & is soluble in Chloroform & solvent Ether.
GOLD Member
VERIFIED
Feb-11-21
Supplier From Faridabad, Haryana, India
 
Soybean Oil" is a vegetable oil that's extracted from the seeds of the soybean plant. Between 2018 and 2019, around 62 million tons (56 million metric tons) of soybean oil were produced around the globe, making it one of the most common cooking oils available.
Physical Characteristics Physical State : Liquid Appearance : Light Yellow, Clear and Brilliant Taste : Bland Odor : Bland Color: 5 - 13.5 Yellow / 0.6 - 2.0 Red Quality Standards Free Fatty Acid %: 0.05 - 0.1% Peroxide Value meq/kg: 0.5 - 1.0 meq/kg Refractive Index @ 40oC: 1.4666 - 1.47 Iodine Value (Wijs): 123 - 139 Moisture %: 0.05 - 0.1% Cold Test: 5.5 hrs OSI @ 110oC: 5.5 - 6.0 hrs Saponification Value: 191 - 192 Specific Gravity @ 25oC: 0.915 - 0.925 Smoke Point: 460 - 465oF Flash Point: 650 - 655oF Fire Point: 690 - 695oF Fatty Acid Properties Typical Fatty Acid Profile (major acids) Type Name C14:0 Myristic 0.1% C16:0 Palmitic 8.0 - 14.0 % C16:1 Palmitoleic 0.0 - 0.2% C17:0 Heptadecanoic 0.0 - 0.1% C17:1 9-Heptadecenoic 0.0 - 0.1% C18:0 Stearic 3.0 - 5.0 % C18:1 Oleic 20.0 - 32.0 % C18:2 Linoleic 47.0 - 57.0% C18:3 Linolenic 5.8 - 8.2 % C20:0 Arachidic 0.1 - 0.5% C20:1 Eicosenoic 0.2 - 0.3% C22:0 Behenic 0.2% C24:0 Lignoceric 0.0 - 0.1%
GOLD Member
VERIFIED
Feb-11-21
Supplier From Faridabad, Haryana, India
 
Soybean Oil" is a vegetable oil that's extracted from the seeds of the soybean plant. Between 2018 and 2019, around 62 million tons (56 million metric tons) of soybean oil were produced around the globe, making it one of the most common cooking oils available.
Physical Characteristics Physical State : Liquid Appearance : Light Yellow, Clear and Brilliant Taste : Bland Odor : Bland Color: 5 - 13.5 Yellow / 0.6 - 2.0 Red Quality Standards Free Fatty Acid %: 0.05 - 0.1% Peroxide Value meq/kg: 0.5 - 1.0 meq/kg Refractive Index @ 40oC: 1.4666 - 1.47 Iodine Value (Wijs): 123 - 139 Moisture %: 0.05 - 0.1% Cold Test: 5.5 hrs OSI @ 110oC: 5.5 - 6.0 hrs Saponification Value: 191 - 192 Specific Gravity @ 25oC: 0.915 - 0.925 Smoke Point: 460 - 465oF Flash Point: 650 - 655oF Fire Point: 690 - 695oF Fatty Acid Properties Typical Fatty Acid Profile (major acids) Type Name C14:0 Myristic 0.1% C16:0 Palmitic 8.0 - 14.0 % C16:1 Palmitoleic 0.0 - 0.2% C17:0 Heptadecanoic 0.0 - 0.1% C17:1 9-Heptadecenoic 0.0 - 0.1% C18:0 Stearic 3.0 - 5.0 % C18:1 Oleic 20.0 - 32.0 % C18:2 Linoleic 47.0 - 57.0% C18:3 Linolenic 5.8 - 8.2 % C20:0 Arachidic 0.1 - 0.5% C20:1 Eicosenoic 0.2 - 0.3% C22:0 Behenic 0.2% C24:0 Lignoceric 0.0 - 0.1%
GOLD Member
Dec-31-20

Sesame Seed Oil

$400
MOQ: Not Specified
Supplier From Saint-Paul, France
 
melting point : -5 C

density : 0.919

Refractive index : 1.47-1.476

flash point : 255 C

Storage conditions : 2-8C

solubility : chloroform: 0.1 mg/mL, clear, very faintly yellow

Sesame oil is extremely stable and a rich source of Vitamin A, B, and E. Also, it contains beneficial anti-oxidants. Our Sesame Oil easily subsides into the skin and improves blood circulation and immunity.
GOLD Member
Dec-30-20
Supplier From Saint-Paul, France
 
Molecular Formula : C6H12O6.H2O
Molecular Weight : 198.17
Melting point : 146
Flash point : 224.6
Density : 1.56
Acidity (ml) : 1.2max
De-Equivalent : 99.5%Min
Oxide, % : 0.0025max
Sulphate, % : 0.0025max
Insoluble matter in alcohol : Clear
Sulfite and soluble starch : Yellow
Moisture, % : 9.1max
Calcium, % : 0.005max
Iron, % : 0.0005max
Arsenic, % : 0.000025max
Heavy metal,% : 0.00005 max
Loss on drying,% : 7.5-9.5
Residue on Ignition % : 0.1max
GOLD Member
Dec-08-20

Quality Shea Butter

$400
MOQ: Not Specified
Supplier From Saint-Paul, France
 
Product Name: Shea Butter
Type: Unrefined
Grade: Cosmetic Grade A+

Form: Solid

Variety: Vitellaria paradoxa
Odor: Nutty aroma
No chemicals, No Detergents

SPECIFICATIONS
FFA: <3%
Moisture: <1%
Iodine value: 62.1/100g
Saponification value: 179mg KHO/g
Melting point: 35-45C
Flash point: >250C
Solubility: insoluble in water
GOLD Member
Nov-17-20

Corn Oil For Cooking

$250
MOQ: 100  Tons (UK)
Supplier From Saint-Paul, France
 
FFA ( As Oleic) : 3%max.
Moisture/Impurities: 0.5% max.
Refraction Index: 1.4719-1.4740 @ 25 Degree C.
Iodine Index: 120-144.
Saponification Number: 187/192.
Non Saponification matter: 1.0% max.
Soluble in petroleter: 0.1% max.
Sediment: 0.3% max.
Flash point: 121 Degree C min.
Peroxide: 2.0 MEQ 02/KG.
lovibond color:(133.4mm).
yellow:30-15.
Red:3.0-1.5.
Smoking Point:215-217.
Aflatoxinbi:5ug/kg.
Carbonylmeq/kg:10.
Heat test:No educts.

packing :
1L,2L,3L,5L PET Liter Bottles, Jerry Cans of 10-25 Liter plastic and Tin Containers, we also packing in Flexi Tanks and Liter Drums
GOLD Member
Nov-17-20

Bulk Refined Corn Oil.

$250
MOQ: 100  Tons (UK)
Supplier From Saint-Paul, France
 
FFA ( As Oleic) : 3%max.
Moisture/Impurities: 0.5% max.
Refraction Index: 1.4719-1.4740 @ 25 Degree C.
Iodine Index: 120-144.
Saponification Number: 187/192.
Non Saponification matter: 1.0% max.
Soluble in petroleter: 0.1% max.
Sediment: 0.3% max.
Flash point: 121 Degree C min.
Peroxide: 2.0 MEQ 02/KG.
lovibond color:(133.4mm).
yellow:30-15.
Red:3.0-1.5.
Smoking Point:215-217.
Aflatoxinbi:5ug/kg.
Carbonylmeq/kg:10.
Heat test:No educts.

packing :
1L,2L,3L,5L PET Liter Bottles, Jerry Cans of 10-25 Liter plastic and Tin Containers, we also packing in Flexi Tanks and Liter Drums
GOLD Member
Nov-17-20

Pure Refined Corn Oil

$250
MOQ: 100  Tons (UK)
Sample Available
Supplier From Saint-Paul, France
 
FFA ( As Oleic) : 3%max.
Moisture/Impurities: 0.5% max.
Refraction Index: 1.4719-1.4740 @ 25 Degree C.
Iodine Index: 120-144.
Saponification Number: 187/192.
Non Saponification matter: 1.0% max.
Soluble in petroleter: 0.1% max.
Sediment: 0.3% max.
Flash point: 121 Degree C min.
Peroxide: 2.0 MEQ 02/KG.
lovibond color:(133.4mm).
yellow:30-15.
Red:3.0-1.5.
Smoking Point:215-217.
Aflatoxinbi:5ug/kg.
Carbonylmeq/kg:10.
Heat test:No educts.

packing :
1L,2L,3L,5L PET Liter Bottles, Jerry Cans of 10-25 Liter plastic and Tin Containers, we also packing in Flexi Tanks and Liter Drums
Jul-09-21

Automatic Closed Cup Flash Point

$770 - $15.40K
MOQ: Not Specified
 
product brief introduction Product Introduction
Automatic Closed Flash Point Tester used to measure the Closed flash point value of petroleum products.Advanced foreign technology is adopted. LCD TET's pure color touch screen displays the man-machine dialogue interface in Chinese. For parameters such as prevalue temperature oil test label atmospheric pressure and test date it has prompt menu prompt input which is convenient and fast.It is an ideal substitute for imported instruments.Widely used in railway aviation electric power petroleum industry and scientific research departments.

Product nickname FlashPoint Tester Automatic Closed Flash Point Tester Closed flash point automatic tester closed-cup flash pointfull-automatictester self-motionClosed flash point tester Closed flash point tester
GOLD Member
VERIFIED
Jun-29-21
Supplier From Faridabad, Haryana, India
 
We are sellers of White Spirit. Our company offers 4 types white spirit.

Product : white spirit Appearance : clear liquid free from suspended matter Viscosity : 0.4 - 0.5 cps. Color : water white Sp.Gravity at 20c : 0.775 Flash point : 42 c. Distillation range : 153 c.- 237 c. Dry point : 237 c. Aromatic value : 15 - 17% Kb value : 38% by weight Sulphur content : < 5 ppm Acidity content : nil Corrosion : none Water content : nil 160 kg/drum
3686 Closed Cup Flash Point Tester Suppliers
Short on time? Let Closed Cup Flash Point Tester sellers contact you.
Explore Closed Cup Flash Point Tester related import export discussions