Flow: 20m3/h
Head: 64m
Power: 7.5kw
Material: cast iron
Medium: clean water
Outlet dia: 60mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
QJ Submersible pumps Parameters:
Flow range10~500m3/h, Lift scope within 5~405m;
Caliber scope 32~203mm, Temperature range-15~80° C.
Products Overview:
QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
QJ Submersible pumps use conditions
1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water PH 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / L.
Application :
deep well water
farm irrigation
sprinkling irrigation
urban and rural industry
mine supply and drainage.
The biggest feature of deep well pump is to make the motor and pump into one, it is immersed in the groundwater well for pumping and conveying water, a kind of pump, which is widely used in farmland irrigation and drainage, industrial and mining enterprises, urban water supply and drainage and sewage treatment. As the motor is submerged in water at the same time, the structure requirements for the motor are more special than the general motor. The structure of the motor is divided into four types: dry type, semi-dry type, oil-filled type and wet type.
Before starting the pump, the suction pipe and the pump must be filled with liquid. After the pump is turned on, the impeller rotates at a high speed, and the liquid in it rotates with the vane, and under the action of centrifugal force, it flies away from the impeller and shoots outward, and the liquid shot out in the diffusion chamber of the pump casing slows down gradually, and the pressure increases gradually, and then it flows out from the outlet of the pump and the discharge pipe. At this time, in the centre of the vane as a result of the liquid is thrown to the surrounding and the formation of neither air nor liquid vacuum low-pressure area, the liquid in the pool of liquid pool under the action of atmospheric pressure, through the suction pipe into the pump, the liquid is so continuously from the pool of liquid is pumped up and continuously from the discharge pipe out.
Multifunctional water-based cleaner specially formulated to remove stubborn stains like oil, grease, and dust on machines, metal, plastic, glass, floors, and various other surfaces. It remains safe when it comes into contact with skin.
The perfect solution to maintain cleanliness and performance of parts in your company, R219 is odorless and contains a corrosion inhibitor that effectively prevents rust, ensuring equipment remains protected and durable. Clean thoroughly and quickly without the risk of damage!
Highly recommended for use :
Automotive, Manufacturing, Oil and Gas, Paper Mills, Mining, Food Processing Plants, Heavy Equipment, Construction, Marine, Utilities and Power Generation, Steel Fabrication Industry, etc.
29713 Clean Water Deep Well Pump Suppliers
Short on time? Let Clean Water Deep Well Pump sellers contact you.
Submersible water pumps for mining, deep well pump, centrifugal pump, stainless steel pump
Model:200QJ20-30/2
Flow: 20m3/h
Head: 30m
Power: 3kw
Material:Cast iron/stainless steel
Impeller material:Cast Iron/stainless steel
Pressure:Low Pressure
Warranty:12 Months
Color:Blue
Place of Origin: ,China (Mainland)
Deep well submersible water pump Overview:
deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Deep well submersible water pump structure&model meaning
1. Submersible electric pump is composed of five parts: water pump, submersible motor, water line, waterproof cable and control switch. Water pump belongs to single suction multistage vertical centrifugal pump.
2. Submersible motor adopts water-filled wet structure, internal chamber was filled with water for cooling the motor and lubricating the bearing. In the operation, due to the changes of temperature, the pressure of the filled water in the internal chamber also changes, it can be automatically regulated by pressure-regulating unit in the lower part of motor.
3. For preventing the sand getting into the motor, the sand-preventing unit including sand and skeleton oil-sealed was installed in the upper part of motor, the whole motor was sealed tightly.
4. There are water injection hole and exhaust hole in the upper part of the motor and discharge hole in the lower part.
5. There are thrust bearing and thrust collar, mainly for sustaining remnant axial force of pump and the empty weight of motor's rotor.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Flow: 10m3/h
Head: 195m
Power: 13kw
Material: cast iron
Medium: clean water
Outlet dia: 32mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
QJ Submersible pumps Parameters:
Flow range10~500m3/h, Lift scope within 5~405m;
Caliber scope 32~203mm, Temperature range-15~80° C.
Products Overview:
QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
QJ Submersible pumps use conditions
1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water PH 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / L.
Application :
deep well water
farm irrigation
sprinkling irrigation
urban and rural industry
mine supply and drainage.
Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province.
The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence.
Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.
Rose water is made using damask roses, many-petaled and fragrant. These were first grown in Iran and Bulgaria, but are now frequently found in Spain, Italy, and France. The uses of rose water are as varied and numerous as the petals of a damask rose. Most western countries are familiar with rose water or rose oil as an addition to fragrances and in body and facial creams. Commercial preparations come in many forms and can safeguard against bacterial formation. In addition, the buyer can choose organic preparations, thus eliminating pesticides from the roses in their food or on their bodies. However used, rose water is certainly almost universally enjoyed, with its sweet and deep aroma, and delightful and unusual taste.
Rose Damascena flower water may be used as face clean toner.
Rose water Improves skin water balance.The contect of Rose oil into Rose water (around 0,06%) acts as a disinfectant and antibacterial ,so Rose water can be used to:
-disinfection in skin irritations, redness, insect bites
It cleanses, tones and gives a youthful appearance to each skin type while preserving the natural hydro-balance in the epidermis. Regular use of rose water in the form of tonic and face cleanser regulates the production of sebum and soothes and regenerates irritated skin.
It has antibacterial action. Applied externally to inflammatory processes, acne, skin redness, eczema and itchy skin. Suitable for baby skin.
-Aromatherapy uses its relaxing and soothing effect by placing it in a aromatherapy bath, in the bath, or spraying through a spray in the room. The fresh scent refreshes the spirit and harmonizes the mind. It has a toning and restoring effect, it brings a sense of romance.
ROSE PEARLS is a GMO-free, natural product made of high-quality organic Rose Damascena oil from Bulgaria.
Rose Damascena, also known to the world as the Oil giving Rose from Kazanlak, is the queen of flowers and the Rose valley in Bulgaria has become her kingdom. Our rose plantations are located in to the village of Skobelevo - in the heart of Bulgaria, an ecologically clean area at the foot of the Balkan Mountains. In order to extract the essential ingredients of roses, our company Alba Grups uses water-steam technology, a technology with tradition in distillation. We use no chemicals in our process.
Hundreds of rose petals are needed to extract just one drop of rose oil. For a kilogram of rose oil we need about 4 tons of rose petals, nearly 1,660,000 freshly picked roses. Rose flowers are handpicked very early in the morning and are processed as fast as possible to keep the high quality of the oil. This makes it one of the most expensive essential oils in the world. Its quality, how it is used, and the way it benefits the body have been known to the world for centuries.
Rose Pearls capsules are a food supplement and benefit the digestive and urinary system. They help strengthen and bring the bodies systems into harmony, including the respiratory, reproductive and immune systems. Only three pearls a day will make you feel healthy, alive and energetic.
CWS-MS is Maize based pregelatinized starch. It is Plant based, physically modified and Non GMO fine powder made from maize, which is moderately soluble in cold water and has a very good binding strength. CWS-MS is a Perfect additive for coating the nuts and snacks. CWS-MS also acts as Stabilizing agent in cream fillings, sauces, soup mixes, gravies, pasty creams and other food product industries.
Please confirm more details we will sent you price list.
1. what the water pumps head and water capacity?
2. Any request about the borehole diameter.
3. How about voltage and frequency 380V or 220V,50HZ or 60HZ?
4.Whatâ?²s the temperature of water?
5. What the material, cast iron or stainless steel?
SkySeaParticipate in the formulation of national standards for submersible pumps.
FAQ & Contact us:
Q1: Are you manufacturer or a trading company?
A: We are the best manufacturer in submersible pump with a history of 70 years in China.
Q2: What are your payment terms?
A: 30% deposit and balance T/T against copy of Bill of Lading or L/C at sight.
Q3: Can you do OEM?
A: Yes, we can. Any OEM is welcome.
Q4: How about MOQ?
A: Usually, it is 5 PCS for each model.
Q5: How about the delivery time?
A: Usually, 20-30 days after receiving your L/C order.
Q6: How about the warranty?
A: 1 year.
Why Choose US?
1. Specializing in manufacturing submersible pump products for 70 years.
2. The motor and pump body are self-produced on the whole line.
3. Each product is tested by 136 processes and strictly controlled by quality.
Product Description:
Submersible water pump for deep well has perfect design and resonable structure which has low noise and long lifetime, small volum, no water pollution.
Submersible water pump for deep well is widely used for deep well, farmland irrigation, spray irrigation, urban and rural industry enterprise and drainage ect.
Product Advantage:
1. High efficiency and energy saving; Save and environmental friendly.
2. Strong and durable, stable and reliable.
3. Easy to use and widely application.
Working Conditions
(1) Three-phase AC power supply of rated frequency at 50HZ and rated voltage at 380±5%V.(user voltage at 660V shall be otherwise specified)
(2) Pump inlet shall be kept below the dynamic level by 1 meter, but the submerged depth shall not exceed 70 meters below the static level. And the lower part of motor shall be kept at least 1 meter to the bottom of the well.
(3) Generally, water temperature shall not be higher than 30.
(4) Water quality requirements:
a. Sand content in water not greater than 0.01%( weight ration)
b.PH value between 6.5~8.5
c. Chlorine ion content not greater than 400mg/l
The hydraulic end can be selected and installed with discstructure inlet and outlet valve group or cone structure inlet and outlet valve group to meet the requirements of different working conditions.
It is suitable for metallurgical descaling,secondary oil recovery,tertiary oil recovery,water injection,injection,hydraulic plunger pump and other industrial applications requiring large flow.
This series ofproducts can transport 0~50 C water,emulsion,and other chemical property similar to water liquids.
Material:Cast iron/stainless steel
Impeller material:Cast Iron/stainless steel
Pressure:Low Pressure
Warranty:12 Months
Color:Blue
Place of Origin: ,China (Mainland)
Deep well submersible water pump Overview:
deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
Deep well submersible water pump structure&model meaning
1. Submersible electric pump is composed of five parts: water pump, submersible motor, water line, waterproof cable and control switch. Water pump belongs to single suction multistage vertical centrifugal pump.
2. Submersible motor adopts water-filled wet structure, internal chamber was filled with water for cooling the motor and lubricating the bearing. In the operation, due to the changes of temperature, the pressure of the filled water in the internal chamber also changes, it can be automatically regulated by pressure-regulating unit in the lower part of motor.
3. For preventing the sand getting into the motor, the sand-preventing unit including sand and skeleton oil-sealed was installed in the upper part of motor, the whole motor was sealed tightly.
4. There are water injection hole and exhaust hole in the upper part of the motor and discharge hole in the lower part.
5. There are thrust bearing and thrust collar, mainly for sustaining remnant axial force of pump and the empty weight of motor's rotor.
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
Flow: 10m3/h
Head: 150m
Power: 9.2kw
Material: cast iron
Medium: clean water
Outlet dia: 32mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
QJ Submersible pumps Parameters:
Flow range10~500m3/h, Lift scope within 5~405m;
Caliber scope 32~203mm, Temperature range-15~80° C.
Products Overview:
QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
QJ Submersible pumps use conditions
1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water PH 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / L.
Application :
deep well water
farm irrigation
sprinkling irrigation
urban and rural industry
mine supply and drainage.
Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province.
The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence.
Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.
evian�® is all natural and perfectly pure. Each drop of Evian starts as rain and melting snow on the peaks of the Northern Alps. It filters through layers of glacial sand during a 15+ year journey deep in the heart of the mountains. Through this process, Evian is filtered naturally, without chemicals, giving it the purity, mineral content, and taste that nature intended.
EVIAN mineral water
This mineral water is with French label
EVIAN - 24 x 33 cl pet bottles
EVIAN - 24 x 50 cl pet bottles
EVIAN - 12 x 75 cl (sport cap) pet bottles
EVIAN - 12 x 100 cl pet bottles
EVIAN - 12 x 150 cl pet bottles
Broomsticks that are made from palm ekels leaves.
Length: 90 120 cm
Condition: Well Dried
Color : Yellowish Greenish
Flower/ Grass Broom
Products are made from Flower / Grass (phragmites). A currently very popular products, that are used to make a soft grass broom that cleans better than palm broom sticks.
Length: 60-70cm (premium) & 130 cm (medium)
Condition: Well Dried
Color : Yellowish
Nipah/ Nypah Broomsticks
Products are made from Nypahs leaves. Products will not be as much as palms. North Sumatra and West Sumatra are two most common producers.
Length: 120 -140 cm
Condition: Well Dried
Color : Yellowish
Packaging Details: Woven Plastic Bags/ gunny plastic (as per your requirement)
Free samples (shipping & taxes paid by the buyer)
29713 Clean Water Deep Well Pump Suppliers
Short on time? Let Clean Water Deep Well Pump sellers contact you.
