Low ignition temperature; higher activity in low temperature; high-resistant crushed strength, high anti- poison; high anti- pulverization etc.
LS112 cesium-promoted catalyst integrates not only the active constituent of vanadium pentoxide and the promoters of cesium and potassium salts, but also the carrier of select diatomaceous earth. Its activity under low and high temperature conditions keeps high due to the unique manufacturing process and optimized formulation.
Cesium-promoted catalyst enables new opportunities for improvement in start-up time, energy efficiency of electricity throughout the operating cycle and strong reduction in SO2 emission that far lower than national standard. The product is the all-around catalyst suited for all stages in converter due to its low ignition temperature and good heat tolerance under high temperature condition.
Cs series enables the compliance with pollutant emission standards due to its enhanced activity and longer service life.
This Cesium Vanadium Catalyst is mainly used in the Section I upper part, Section III, Section IV and Section V of the converter. Operating temperature is 390 -620
S112 series cesium vanadium catalyst is made by taking refined composite diatomite as high-performance carrier with new techniques. Alkali metal cesium and potassium compounds are adopted as promoters so that vanadium pentoxide and promoters uniformly and fully penetrate into the carrier in the form of solution. The cesium vanadium catalyst is thus refined.
S112 low temperature series vanadium catalyst has high activity level, especially in the temperature range of 390-620 . Its ignition temperature is 320 . The vanadium catalyst has the following features:
1.The reaction speed is faster than that of ordinary catalyst, and it is especially suitable for the low atmosphere conditions of high concentration of sulfur dioxide or oxygen and sulfur dioxide in the Section I. Compared with S108 ordinarylow-temperature catalyst, it can effectively reduce the inlet temperature by about 20
2.It has good low-temperature activity and can greatly reduce sulfur dioxide emissions when used in the Section IV and V of the converter.
3.Under the reaction atmosphere with high impurity content and harsh conversion conditions, it has strong pulverization resistance and long service life.
Bizwhite Clay Catalyst is a highly active, low moisture granulated acid-activated montmorillonite with unique surface chemistry.
In fixed bed aromatics purification, BizWhite Clay Catalyst a catalyst and adsorbent offer enhanced process unit economics, superior product quality, and dependable performance.
In the petroleum refining and petrochemical industries, the initialism BTX refers to mixtures of benzene, toluene, and the three xylene isomers, all of which are aromatic hydrocarbons. The xylene isomers are distinguished by the designations ortho (or), metal (or), and para (or ) as indicated in the adjacent diagram. If ethylbenzene is included, the mixture is sometimes referred to as BTEX.
Bizwhite Clay Catalyst is included in the universal oil product duty specification for clay treating of BTX. BizWhite Clay Catalyst is developed for adsorption and acid catalyst in fixed bed reactors. BizWhite Clay Catalyst is a product designed with a highly porous inner structure. This results in an accessible active site for reactants and lowers diffusion limitation for by products.
Bizwhite Clay Catalyst is designed for Olefin removal from BTX. BizWhite Clay Catalyst works excellent for the selective removal of olefins from Benzene/Toluene and Heavy Reformates (mainly Xylenes).
Fruit Stone Seeds Removing machine series fruit different capacity different ,machine are little different )
Apricot kernel remover stone /core removing machine
Peach core remover
Apricot,Peach,Jujube nut removing machine
Red date/Peach and apricot /Green plum /
Cherry /Hawthorn /Sandberry /Iraq date /Date de /Marinated peach kernel machine
Olive /Li Zi /Nut and butter/Litchi/ Pear nuclear machine
Longan /Automatic nuclear removal machine of large-scale red date
Semi automatic small jujube type /Hawthorn / Beach date /Prunus cherry and so on ...
Technology advantage :
1. The full-automatic equipment has high degree of automation. The mold conveyor belt can automatically feed and send materials to carry out transportation and core flushing. It only needs to pour the fruit into the feed hopper to complete the separation effect of core and flesh. It can work continuously and solve the problems of low efficiency, labor-consuming and time-consuming of manual core removal.
2. The structure of the machine is composed of stainless steel thick wall square tube and channel steel welding, which makes the equipment more stable during start-up and operation. All parts are assembled with bolts, which makes the operation and maintenance of the equipment more convenient.
3. The raw material of the equipment is made of stainless steel, which meets the hygienic standard of food processing equipment. The conveyor belt is made of imported polyurethane material, which is wear-resistant, tensile, tear resistant and has a longer service life.
4. The operation of the machine is simple and convenient, without long-term care. One person can manage multiple machines at the same time. The transmission system adopts advanced design concept and standardized components. The principle of core punching adopts the process of machine tool to punch the core, so that each equipment meets the high design standard, so that the effect of core removing is good, and the fruit shape is completely unchanged.
Product Description
Potassium Formate is chemically represented by the formula KCOOH. Potassium Formate is available as stock, clear fluid which can be used in workover and completion operations that require a density to 13.2ppg(1.58SG) and a base liquid for drill-in fluids. Formate-base brines are considered to have better HSE characteristics than chlorides and bromides brines for many applications. Although more expensive than alternative brines, potassium formate brines show excellent thermal stabilization effects on natural polymers and the potassium ions provides excellent clay stabilization and swelling inhibition of shales. Sodium formate is available as a dry-sacked material and as a stock liquid.
Applications/Functions
Used in workover and completion operations that require clear fluids with a density up to 13.2ppg
Used as a base liquid for drill-in fluids
Widely used in slim hole drilling, horizontal wells, branch hole drilling and stringent environmental requirements area
Advantages
Excellent clay stabilization and swelling inhibition of shales
Compatible with other drilling fluids additives
Saturated solution is 76% w/w and readily soluble
Low activity of aqueous solution provides enhanced hole stability
High core permeability with minimal reservoir damage
Environmentally friendly product
Typical Properties
Appearance: Clear liquid or white crystal; Specific gravity of solid: 1.91; Solution pH: 9-11;
Solubility in water: 310g/100ml water at 77�°F
Recommended Treatment
Drilling conditions and mud system requirements dictate concentration levels
Package
1 MT BIG BAG or 1000L IBC TOTES
Any tradition includes sets of various accessories; let us remember the oriental tradition of drinking tea as an example. The tradition of mate tea is not the exception. The main accessories of the mate drinking culture are the cup for mate – mate, or calabaza, and the tube for mate – bombilla.
Series “ro”
Series “et”
Series “al”
Series “dm”
Series “arg”
Series “jv”
Series “as”
Series “mp”
Series “el”
Series “vi”
Series “ma”
Series “er”
Series “nj”
Series “pa”
Series “dd”
Series “rt”
Series “ot”
Series “jrt”
Series “vp”
Fasteners are the general term of the class of mechanical parts used in fastening two or more parts (or components) into a whole. It is widely used in energy, electronics, electrical appliances, machinery, chemical, metallurgy, mold, hydraulic and other industries, at the same time, in various kinds of machinery, equipment, vehicles, ships, railway, bridge, construction, structure, tools, instruments, chemical, instruments and supplies, you can see all kinds of fasteners, is the most widely used mechanical foundation parts. It is characterized by a wide variety of variety specifications, different performance uses, and a very high degree of standardization, series, and generalization. Therefore, a class of fasteners that already have national standards is called standard fasteners, or simply standard ones.
Focus-6500 butyl tapes has good performance in waterproofing and sealing, non-hardening, weather resistance, strong adhesion, adaptation and anti-aging .
Technical Data
Product Series FOCUS-6500 Series
Application Home Decoration Industry
Elongation 500%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h
Peel Strength 22N/cm
Tensile Strength 210KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet
Advantages
Smooth and Delicate.
Excellent Adaptation.
Greene nvironmental protection.
Non-toxic tasteless.
Good performance in waterproofing and sealing.
Best quality with outstanding service life.
Applications
Focus-6500 butyl tapes are widely used in bathrooms, kitchen, home decorations, office areas and other home applications, for its good
waterproof/mildew proof /airtight and environmental property.
Chemical name:Magnesium nitrate
Molecular formula:Mg(NO3)2.6H2O
Molecular weight:256.40
Property:soluble in water,liquid ammonia, methanol and ethanol.Stable at room temperature, the relative density of 1.461, higher than the melting point of 95�°C off the water to generate alkaline magnesium nitrate, heated to 300�°C begins to decompose above 400�°C to completely decompose into magnesium oxide and Nitrogen oxide gas.
Quality standard:
Item Indicator
Industrial grade Agriculture grade
Magnesium nitrate (Mg(NO3)2.6H2O) â?¥98.0% â?¥98.0%
PH value â?¥4 ---
Heavy metal â?¤0.002 ---
Water insoluble â?¤0.05% â?¤0.1%
Iron â?¤0.001% ---
Magnesium oxide content(CaO) --- â?¥15%
Nitrogen content(N) --- â?¥10.7%
Use:Concentrated nitric acid for industrial de-water agent, manufacture of explosives, catalysts and other magnesium salts and nitrates catalyst raw materials, wheat ashing agent.Used in agriculture, magnesium soluble fertilizer for soilless culture.
Packing:25/50KGlined with plastic bag and exterior is woven bagPacking or according to customers requirements.
1.Purity 98% white granule
2.Used for fertilizer or industrial material
3.Export Asia/Europe
4.ISO9001
Adopting unique production technology, Focus- 6300 buytl tapes are mainly made of butyl rubber supplemented by other auxiliaries and fillers, with the superior high polymer materials. With its strong adhesion property and air-tight
property, our waterproof sealing butyl tapes are environmental and solvent-free. Main Specification (Customized demand sare acceptable.)
6mm*8m
8mm*6m
10mm*4.57m
Main Color - black
Technical Data
Product Series FOCUS-6300 Series
Application Automotive Industry
Elongation 500%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 23N/cm
Tensile Strength 230KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanized sheet, aluminum sheet and coppersheet.
Advantages
Strong adhesion, high tensile strength, excellent elasticity and extensibility. It can fully accommodate to the surface that it attached to
Excellent performance in non-corrosive, weather resistance and
adaptation.
Applications
Provide waterproof
protection to car doors waterproof membrane. Provide waterproof and
sealing protection to the battery of new energy
automobile.
Other waterproof applications on cars and new energy cars
Focus-6400 butyl tapes are waterproof and insulated tapes with strong adhesion
and adaptation to irregular surfaces. It exhibits excellent performance in
waterproof, sealing and anti-UV to antenna feeder and cable connection
box.
Main Specification
(Customized size is acceptable.) 2mm*40mm*20m * 8.5mm * 8mm * 10mm * 12mm
Main Color - Black
Technical Data
Product Series FOCUS-6400 Series
Application Communication Industry
Elongation 400%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h
Tensile Strength 175KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet.
Advantages
Strong adhesion and adaptation to irregular surface. Good compatibility with various cables. Wide application temperature range. Excellent performance in weather resistance, waterproof sealing and anti-aging. Applications
Provide waterproof and sealing protection to communication base station and antenna feeder.
Provide waterproof and sealing protection to cable connection box
Focus-6400 butyl tapes are waterproof and insulated tapes with strong adhesion
and adaptation to irregular surfaces. It exhibits excellent performance in
waterproof, sealing and anti-UV to antenna feeder and cable connection
box.
Main Specification
(Customized size is acceptable.)
2mm*40mm*20m * 8.5mm * 8mm * 10mm * 12mm
Main Color - Black
Technical Data
Product Series FOCUS-6400 Series
Application Communication Industry
Elongation - 400%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility Â40, no crack on surface within 24h
Tensile Strength 175KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet.
Advantages
Strong adhesion and adaptation to irregular surface.
Good compatibility with various cables.
Wide application temperature range.
Excellent performance in weather resistance, waterproof sealing and anti-aging.
pplications
Provide waterproof and sealing protection to communication base station and antenna feeder.
Provide waterproof and sealing protection to cable connection box
Focus-6200 products are kind of non-hardening and self-adhesive waterproof sealing butyl tapes. The materials are weathering resistance and fully accommodate to the surface that it attached to, with effective life up to 20 years.
Main Specification
(Customized size is acceptable.)
2mm thickness * 20mm width * 20mm roll
length 2mm thickness * 30mm width *20mm roll length
Main Color - black, grey, white
Technical Data
Product Series FOCUS-6200 Series
Application Construction Industry
Elongation - 500%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h
Peel Strength 25N/cm
Tensile Strength 250KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet
Advantages
* Never hardening, maintain good waterproofing property with weathering resistance performance.
* Excellent performance in waterproofing and sealing.
* Good anti-aging performance effective life up to 20years.
* Easy to apply.
Applications
* Provide waterproof and sealing protection forsteel
structure construction.
* Provide waterproof and sealing protection for door joints, window joints,roofs
and air-ducts. Provide waterproof and sealing protection for sunshine rooms, light plate rooms and thermostatic chamber.
* Provide repair function for leaks on surfaces of metal/plastic/glass/concrete.
Focus-6100 butyl tapes are mainly made of butyl rubber with excellent performance in waterproofing and sealing.
Main Specification
(Customized size is acceptable.) 3.0mm thickness
* 12mm width *15m roll length
2.5mm thickness * 8mm width * 15m roll length
2 mm thickness * 15mm width * 20m roll length
2.5 mm thickness * 8mm width * 20m roll length
Main Color
black, grey, white
Technical Data
Product Series FOCUS-6100
Application Composite Materials Industry
Elongation 500%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h
Peel Strength 23N/cm
Tensile Strength 220KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet.
Advantages
Strong adhesion.
Wide application temperature range.
Excellent performance in waterproofing and sealing.
Applications
* During the production of vacuum extraction process for wind mill blade, it has excellent sealing property between vacuum bags and molds. During the production of vacuum extraction processfor fiberglass, it has excellent
sealing property between vacuum bags and molds.
* During the production of vacuum extraction process for cabin cover, it has excellent sealing property between vacuum bags and molds.
* As auxiliary materials, our Focus-6100 series are widely used in the production of wind mill blade, fiberglass, cabin cover, car tail bracket, automotive engine cover, yacht.
* Our products have excellent sealing property between vacuum bags and mold during the vacuum extraction process.
Prperties: The prduct is a white needle crystal r pwder. SP. GR. 2.8823.13g/ cm3, sublimatin temp. 1272Celsiur scale.Its slightly sluble in water and greatly sluble in HF liquid. The chemical prperty fr the high density aluminum fluride is very steady, but that cntains certain crystal water will be decmpsed int Al23 at high temperature with HF being released.
Specificatin:
grade chemical cmpsitin % Physical character
F Al N2 Fe2342- P25 LI Bulk dity g/cm3
AF-0 61.0 31.5 0.30 0.10 0.06 0.10 0.03 0.5 1.5
AF-1 60.0 31.0 0.40 0.30 0.10 0.6 0.04 1.0 1.3
AF-2 58.0 29.0 2.8 0.30 0.12 1.0 0.04 5.5 0.7
AF-3 58.0 29.0 2.8 0.35 0.12 1.0 0.04 5.5 0.7
Uses: Its mainly used as an adjusting agent fr electrlyte in aluminum smelting by fused salt electrlysis, als in ceramic glaze, catalyst and flux f nnferrus metal metallurgy etc.
Brief Intrductin f the Prductin Technics
In the Hydrgen Fluride Reacting Furnace which is heated utside, Vitril reacts with Flurite t create the Hydrgen Fluride Gas and Anhydrus Fluride Plaster by heating in the prcess f prducing Aluminum Fluride, then the Hydrgen Fluride Gas react with dry Aluminium Hydrxide in Fluidized Bed t create t Aluminum Fluride and water.
Packaging
packed in wven PP bags with plastic film inside. Each bag has net weight f 25kgs, 50kgs, 500kgs and 1000kgs.
Cesium formate solutions, such as cesium formate brine (brine), are high-density, low-viscosity clear brine that is useful as drilling fluids, completion fluids, intervention fluids, and suspension fluids used to collect and operate Chemicalbook in Wells and reservoirs. Cesium formate is quite useful in HPHT(high pressure high temperature) drilling locations.
Product Description
Potassium Formate is chemically represented by the formula KCOOH. Potassium Formate is available as stock, clear fluid which can be used in workover and completion operations that require a density to 13.2ppg(1.58SG) and a base liquid for drill-in fluids. Formate-base brines are considered to have better HSE characteristics than chlorides and bromides brines for many applications. Although more expensive than alternative brines, potassium formate brines show excellent thermal stabilization effects on natural polymers and the potassium ions provides excellent clay stabilization and swelling inhibition of shales. Sodium formate is available as a dry-sacked material and as a stock liquid.
Applications/Functions
Used in workover and completion operations that require clear fluids with a density up to 13.2ppg
Used as a base liquid for drill-in fluids
Widely used in slim hole drilling, horizontal wells, branch hole drilling and stringent environmental requirements area
Advantages
Excellent clay stabilization and swelling inhibition of shales
Compatible with other drilling fluids additives
Saturated solution is 76% w/w and readily soluble
Low activity of aqueous solution provides enhanced hole stability
High core permeability with minimal reservoir damage
Environmentally friendly product
Typical Properties
Appearance: Clear liquid or white crystal; Specific gravity of solid: 1.91; Solution pH: 9-11;
Solubility in water: 310g/100ml water at 77 F
Recommended Treatment
Drilling conditions and mud system requirements dictate concentration levels
Package
1 MT BIG BAG or 1000L IBC TOTES
28426 Cesium Series Catalyst Suppliers
Short on time? Let Cesium Series Catalyst sellers contact you.