Cobalt oxide (Co203) is an expensive cobalt oxide with a theoretical cobalt content of 71.06%, an oxygen content of 28.94%, and a density of 6.079/cm3. It is a black amorphous powder that generates cobalt oxide (Co304) after heating. Cobalt oxide is an unstable compound and cannot be freed. The cobalt oxide commonly referred to actually still contains a certain amount of cobalt tetraoxide. Co203 is only stable in a hydrated state. This hydrate will dehydrate and transform into the intermediate oxide cobalt tetraoxide (Co304) at 265�°C. Cobalt oxide is reduced to cobalt tetraoxide (Co304) by H2 at 125�°C, reduced to CoO at 200�°C, and reduced to cobalt metal at 250�°C. Cobalt oxide is insoluble in water. After dissolving in water, it decomposes into hydrates when it encounters water. It is insoluble in water, but soluble in acid and forms corresponding salts.
Cobalt oxide (Co203) is an expensive cobalt oxide with a theoretical cobalt content of 71.06%, an oxygen content of 28.94%, and a density of 6.079/cm3. It is a black amorphous powder that generates cobalt oxide (Co304) after heating. Cobalt oxide is an unstable compound and cannot be freed. The cobalt oxide commonly referred to actually still contains a certain amount of cobalt tetraoxide. Co203 is only stable in a hydrated state. This hydrate will dehydrate and transform into the intermediate oxide cobalt tetraoxide (Co304) at 265�??�?�°C. Cobalt oxide is reduced to cobalt tetraoxide (Co304) by H2 at 125�??�?�°C, reduced to CoO at 200�??�?�°C, and reduced to cobalt metal at 250�??�?�°C. Cobalt oxide is insoluble in water. After dissolving in water, it decomposes into hydrates when it encounters water. It is insoluble in water, but soluble in acid and forms corresponding salts.
escription:
This is obtained as an olive-green powder by heating the metal in air or steam or by thermal decomposition of the hydroxide, carbonate or nitrate. It has the sodium chloride lattice and is antiferromagnetic below 292�°K. When heated in oxygen above 400�° the black oxide Co3O4 is obtained. This oxide is isomorphous with magnetite Fe3O4, and has tetrahedrally surrounded cobalt(II) ions and octahedrally surrounded cobalt(III) ions. Both these oxides are readily reduced to the metal by heating in hydrogen or with carbon. The reactions of CoO with silica, alumina and zinc oxide are used to form pigments in the ceramic industry.
Application:
Mainly used for glass, enamel, ceramic, magnetic materials such as dense agent, azure blue, cobalt blue, cobalt green color colorant, catalyst, livestock nutrition agent. It is also used in the preparation of cobalt salts.
In pigments for ceramics; glass coloring and decolorization; oxidation catalyst for drying oils, fast-drying paints and varnishes; preparation of cobalt-metal catalysts, Co powder for binder in sintered tungsten carbide; in semiconductors.
Chemical Name:4-Hydroxybenzoic acid
Trade Name:p-oxybenzoic acid
Molecular Formula:C7H6O3
Molecular Weight:138.12
CAS No.:99-96-7
Properties:white odorless crystalline powder, easily soluble in hot water and alcohols, aethers and acetone,
slightly soluble in cold water and benzene, insoluble in carbon bisulfide; relative density is 1.46
Use: Can be used as antiseptic, intermediate of dyes, pharmaceuticals; as main material of liquid crystal polymers; as material of pesticide intermediate
Specification
Item Specification
Polymer Grade Technical Grade
Appearance white crystal powder white crystal powder
Purity(on dry base) % 99.6 99.0
Melting Point 214-217 212-216
Odor odorless odorless
Solubility Clear and transparent clear and transparent
Loss on Drying % 0.20 0.50
Color(Pt-Co) 10 40
Ash % 0.02 0.15
Sulfate(SO42-) 0.01 0.05
Chloride(Cl-) % 0.005 0.02
Phe% 0.01 0.10
Salicylic Acid % 0.02 0.10
4-Hydroxyisophthalic Acid(HIPA) ppm 500 /
Insolubles in Metha ppm 50 /
Potassium(K+) ppm 5 /
Sodium (Na+) ppm 5 /
Iron (Fe) ppm 5 /
Ca2++Mg2+ppm 5 /
English name:Â Calcium Nitrite
Molecular formula:Â Ca(NO2)2
Molecular weight:Â 132
CAS NO. 13780-06-8
HS CODE:Â 28341000
UN NO.: 2627 5.1 type oxidizing agent
Properties:Â White powder without crystal water. It is tasteless and toxic. Easily in water and presents light yellow solution.
Specifications:
Item Superior grade First grade Second grade
Calcium Nitrite[Ca(NO2)2Â as dry basis]% 94 92 90
Calcium Nitrate[Ca(NO3)2Â as dry basis]% <4 <5 <6
Calcium hydroxide[Ca(OH)2Â as dry basis]% <1.0 <1.0 <1.0
Moisture % <1.0 <1.0 <1.0
Water insoluble matter % <0.6 <1.0 <1.0
Uses:
1. Antifreezing agent.
2. Inhibitor of steel in concrete.
3. Can prepare compound early strength agent.
Packing 25/50/1000KG woven bag lined with plastic or according to customer's requirements.
1.Name: Sodium nitrate
Chemical formula: NaNO3
Formula weght:84.99
2.Property:
(1) ordinary sodium nitrate: white little crystals or light yellow
(2) dry powder sodium nitrate: non-caking, showing loose status.
Density:2.257. It is liable to deliquesce, dissolved in water, soluble in liquid ammonia, slightly soluble in ethanol and glycerin, Melting Point:308. While being heated up to about 380 it will decompose and release oxygen and turn into sodium nitrite,as the heating goes on, it will decompose into oxygen, nitrogen and nitrogen oxide. It has strong oxidability and can cause combustion explosion if being mixed with organic substance, sulfur, sodium nitrate etc.
3. Usage:Â it has been wildly used in the glass industry, dye, dynamite, metallurgy, machinery, ceramic etc.
4. Specification: (Technical Standards:GB/T4553-2002)
Item Unit High G. First G. Qualified G. Dry powder G.
Assay % 99.7 99.3 98.5 99.3
Sodium nitrite % 0.01 0.02 0.15 0.02
Chlorides % 0.25 0.30 -- 0.25
Water insolubles % 0.03 0.06 -- 0.03
Moisture % 1.0 1.5 2.00 0.2
Carbonates % 0.05 0.10 -- 0.1
Iron % 0.005 -- -- 0.005
Loose degree -- -- -- 95
5.Package: net 25kg/50kg net each in plasic woven inner plasic bag,or 500kg net each in flexible container.
Product Name: Sodium permanganate
Use level: Industrial
Content: 40 (%)
CAS Number: 10101-50-5
Molecular formula:NaMnO4
Molecular Weight: 141.93
Appearance: purple liquid. A density of 1.36 ~ 1.39 g / cm3, soluble in water, ethanol and ether, soluble in liquid ammonia. Decomposition in alkali. Strong oxidizing. And chemical properties similar to potassium permanganate.
Purposes: as oxidants, disinfectants, fungicides and phosphorous antidotes. Toluene is also used to manufacture saccharin, o-toluene sulfonamide and organic synthesis and purification of phenol wastewater treatment. Can be used for circuit boards, metal surface cleaning, the conductive film cleaning to remove grease, electrolytic manganese dioxide, chemical fiber finishing, electroplating addition to hydrogen sulfide and other odors, as well as water treatment and so on.
Packaging and storage: Industrial Pails barrel, net weight 25kg plastic drum, 250kg steel-plastic composite barrels, 1250kg IBC barrels packaging. Store in a cool dry place.
Quality Standard: Â
Items index
Sodium permanganate (NaMnO4) Content / (%) 40
Water-insoluble content / (%) 0.01
Potassium (K) content / (%) 0.22
pH value 6 ?8
Density / (g/cm3) 1.36 1.39
Chloride (Cl) content / (%) 0.02
[Alias] foaming powder; sodium lauryl sulfate; sodium lauryl sulfate; sodium dodecyl sulfate, sodium dodecyl sulfate
[English name] Sodium dodecyl sulfate.
[Abbreviation] SDS
[CAS No.] 151-21-3
[Molecular formula] ROSO3Na R = C12alkyl, C12-C14alkyl
[Molecular weight] 288.38 (R = C12alkyl), 296 (R = C12-C14alkyl)
[Grade] It can be divided into industrial grade (GB/T15963-2008), toothpaste grade (QB/T2900-2012), latex grade and reagent grade according to application fields and standards.
[Technical Indicators]
[Performance and Applications]
This product is a white or yellowish sticky substance, commonly used in detergents and textile industry. Belon to an anionic surfactant.It is easy to dissolve in water, has good compatibility with anions and nonions, and has good emulsification, foaming, penetration, decontamination and dispersion properties. It is widely used in toothpaste, shampoo, shampoo cream, shampoo, washing powder, liquid washing, cosmetics and plastic demoulding, lubrication, pharmaceutical, papermaking, building materials, chemical and other industries.
(1) Used as detergent and textile auxiliaries, also used as toothpaste foaming agent, mine fire extinguishing agent, emulsion polymerization emulsifier, wool detergent, etc.
(2) Used as anionic surfactant, emulsifier and foaming agent
(Use 3) GB 2760-96 stipulates that it is a processing aid for food industry. Blowing agent; emulsifier; anionic surfactant. Used for cake, beverage, egg white, fresh fruit, fruit juice beverage, edible oil, etc.
(4) It is used as an emulsifier for drugs, cosmetics and synthetic resins. Foaming agent for toothpaste and fire extinguisher. Used as a detergent for fine silk and wool fabrics. Flotation agent for metal beneficiation.
(5) Used as detergent and textile auxiliaries, also used as toothpaste foaming agent, fire extinguishing foam liquid, emulsion polymerization emulsifier, pharmaceutical emulsion dispersant, shampoo and other cosmetics, wool detergent.
(Use 6) Biochemical analysis, electrophoresis, ion pair reagent
Product Nature
Chemical name: Potassium Amyl Xanthate (PAX)
Equivalent to : Z-6, AERO 350 xanthate
Molecular Formula: C5H11OCSSK
Physical characteristics: Slight yellow or grey yellow free flowing Powder or pellet and soluble in water. It is a xanthate based on the C5 alkyl isoamyl alcohol in the potassium salt form
Testing method: Lead acetate titration
CAS Number: 2720-73-2
EINECS No.: 213-180-2
Use
A Collector With High Collection And Normal Selectivity,widely Use In Floatation Of CU/PB/NE AND PYRITE, Especially For The Floatation Of The Gold In Gold And Copper Mine.it Could Make Good Result In Copper And Lead Oxidized Ore.ofeen Used In Rough Selecting And Scavenging.
Specifications
Chemical components Specification 1 Specification 2
Purity 85% Min 90% Min
Moisture & volatiles 10% Max 4% Max
Free alkali 0.5% Max 0.2% Max
Packing and Storage
120KG IRON DRUM,134 DRUMS PER 20'FCL,16.08MT; (OR 110-180KG IRON DRUM)
850KG Wooden Box,20 Box Per 20'fcl,17mt; (or 500kg,800kg,850kg Wooden Box With Inner BAG) 25-50KG WOVEN BAG
Product Feature
Odor: Slight irritative.
Specific Gravity: Unavailable
Solubility: Soluble in water.
Density: 2.19
pH: 6-7
pH Test-Method: PH test paper.
% Volatiles by volume @ 21C (70F): 0
Boiling Point: Not applicable.
Melting Point: >300 C Decomposes.
Vapor Pressure (mm Hg): No information found.
Bulk Density: ~0.9
Evaporation Rate (BuAc=1): No information found.
Application
1. Widely used in textile industry for vat dyeing, reduction cleaning, printing and stripping, textile textile bleaching .
2. bleaching paper pulps , especially mechanical pulps, its the most fittable bleaching agent in pulps.
3. bleaching kaolin clay, fur bleaching and reductive whitening, bleaching of bamboo products and straw products,
4. in mineral, the compound of thiourea and other sulphides.
5. as reducing agent in chemical industry.
6. Sodium hydrosulfite food additive grade is used in foodstuffs, as bleaching agent and preservative dried fruits, dried vegetable, vermicelli, glucose, sugar, rock sugar, caramel, candy, liquid glucose, bamboo shoots, mushrooms and canned mushrooms.
Packaging 50kg/100kg net in iron drums with double PVC bags
Product Specification/Models
NDEX 90%, 88%, 85%. FOOD ADDITIVE
Na2S2O4, 90%, 88%, 85%, Fe 20ppm ZincZnOther heavy metal
calculated as Pb, 1ppm
Water Insolubles05%
Shelf Life(month)12
D-Aspartic Acid, CAS No.1783-96-6, an isomer of L-Aspartic Acid manufactured through fermentation, available as White Crystals or crystalline powder. D-Aspartic Acid is an amino acid widely used in nutritional supplements, nutrition enhancers, dietary supplements, health food additives, pharmaceutical raw materials, sports supplements, sports nutritional supplements, and bodybuilding supplements.
As an experienced D-Aspartic Acid manufacturer and supplier, we has been supplying and exporting D-Aspartic Acid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.
Product Description
Categories Amino Acids
Qty in 20â??FCL 10000kg
Min Order 500kg
Origin China
Packaging Factory Packaging or Neutral
Certificate ISO, Kosher, Halal, BRC
CAS No. 1783-96-6
HS Code 292249
Specification Feed/Food Grade
Product Nature
Chemical name:Potassium Amyl Xanthate (PAX)
Equivalent to : Z-6, AERO 350 xanthate
Molecular Formula: C5H11OCSSK
Physical characteristics: Slight yellow or grey yellow free flowing Powder or pellet and soluble in water. It is a xanthate based on the C5 alkyl isoamyl alcohol in the potassium salt form
Testing method: Lead acetate titration
CAS Number: 2720-73-2
EINECS No.: 213-180-2
Use
A Collector With High Collection And Normal Selectivity,widely Use In Floatation Of Cu/pb/ne And Pyrite,especially For The Floatation Of The Gold In Gold And Copper Mine.It Could Make Good Result In Copper And Lead Oxidized Ore.Ofeen Used In Rough Selecting And Scavenging.
Specifications
Chemical components Specification 1 Specification 2
Purity 85% Min 90% Min
Moisture & volatiles 10% Max 4% Max
Free alkali 0.5% Max 0.2% Max
Packing and Storage
120kg Iron Drum,134 Drums Per 20'fcl,16.08mt; (or 110-180kg Iron Drum)
850kg Wooden Box,20 Box Per 20'fcl,17mt; (or 500kg,800kg,850kg Wooden Box With Inner Bag) 25-50kg Woven Bag
Good Price 30% LDAO Lauryl Dimethyl Amine Oxide CAS 1643-20-5
Product details
Chemical Name: Lauryl dimethyl amine oxide
Code: LDAO 30%
Other Name: N,N-dimethyldodecylamine-N-oxid
CAS NO.: 1643-20-5
Formula: C14H31NO
Purity : 30%
LDAO at room temperature is a colorless or yellowish transparent liquid, is a special type of surfactant,
it becomes cationic in acidic medium, and in neutral or alkaline medium is non-ionic. In addition to own
the general surface active agent properties, but also has excellent solubilization, thickening, emulsification, foaming, stable foam, soft, moisturizing, antistatic, good compatibility with human skin, the slightly physiological toxicity, easy to biodegradation.And it has certain bactericidal properties and mildew - proof effect
2. Mild to skin. Make cloth soft and smooth, make hair soft, easy to comb, glossy and shiny.
3. Bleach stable. Good ability of thickening and solubilizing to keep product stable.
4. Good ability of sterilizing and dispersing calcium soap, good biodegradability.
5. Be compatible with anioncic, cationic, amphoteric and nonionic surfactants.
6. Especially suitable for shampoos, bath washes, dish washing detergents
Application
Lauryl Dimethyl Amine Oxide used as detergent, emulsifier, wetting agent, foaming agent, softener,
milling agent and dyeing auxiliary.
Also can be used as sterilizing agent and antistatic agent, as a coagulant during metal plating, as an initiating agent or inhibiting agent in polymerization, as an emulsifying agent or moisturizing agent in cosmetics; otherwise, it can be used as an antirust agent for metal.
Storage:
Kept in dry, cool, and shaded place with original packaging, avoid moisture.
Ambient temperature is10-50, the container to be sealed.
It is not advisable to use containers of copper material. Recommended storage in plastic containers;
a shelf life of two years.
Specification
Product
Lauryl Dimethyl Amine Oxide(LDAO 30%)
CAS#
1643-20-5
Batch No
220310-10
Quantity:
28000KG
Date of manufacturing
Mar. 10th, 2022
Date of expire
Mar. 9th, 2023
Iteam
Specification
Results
Appearance
Light yellow clean liquid
Confirms
Active matter %
29 ~ 32
30.1
Free amine (%)
0.70
0.26
Free peroxide (%)
0.50
0.08
Color (APHA)
100
42
PH value ( 10% solu,25
6.0 ~ 8.0
7.5
Conclusion
Qualified
Dl Aspartic Acid, CAS No.617-45-8, is a mixture of L Aspartic Acid and D Aspartic Acid manufactured through fermentation, available as white powder. Dl Aspartic Acid is an amino acid widely used in nutritional supplements, nutrition enhancers, dietary supplements, health food additives, pharmaceutical raw materials, sports supplements, sports nutritional supplements, and bodybuilding supplements.
As an experienced Dl Aspartic Acid manufacturer and supplier, we has been supplying and exporting Dl Aspartic Acid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.
Product Description
Categories Amino Acids
Qty in 20â??FCL 10000kg
Min Order 500kg
Origin China
Packaging Factory Packaging or Neutral
Certificate ISO, Kosher, Halal, BRC
CAS No. 1783-96-6
HS Code 292249
Specification Feed/Food Grade
Ferrous Lactate, E585, CAS no.5905-52-2, is a ferrous salt of lactic acid manufactured process through neutralizing lactic acid. Ferrous Lactate is widely used as acidity regulator in food, beverage, dairy product, powder drinks, baby food and bakery.
As an experienced Ferrous Lactate manufacturer and supplier, we has been supplying and exporting Ferrous Lactate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.
Categories Preservatives
Qty in 20 FCL 20000kg
Min Order 1000kg
Origin China
Packaging Factory Packaging or Neutral
Certificate ISO, Kosher, Halal, BRC
E No. E585
CAS No. 5905-52-2
HS Code 291811
Specification FCC/USP
Ferrous Lactate Food grade Specification
Ferrous lactate 96% .Min
Loss on drying 20% .Max
Chloride(CI) 0.1% .Max
Iron (Fe 3+ ) 0.6% .Max
Sulphate(SO 4 ) 0.1% .Max
PH 5-6
Lead 1 ppm.Max
Arsenic 3 ppm.Max
Sodium metabisulfite is white or yellow crystalline powder or small crystal, with a strong SO2 odor, soluble in water, the aqueous solution is acidic, when contacted with strong acid, SO2 is released to form corresponding salts, and it is oxidized to Na2S2O6 when placed in the air for a long time. Therefore, the product cannot be stored for a long time. Above 150 degrees Celsius, SO2 is decomposed.
Specification
TEST ITEMS
TEST STANDARD
Na2S2O5 %
96.5
FERRON(Fe) %
0.005
WATER INSOLUBLE %
0.05
ARSENIC(As) %
0.0001
HEAVY METAL(Pb) %
0.0005
Application
Use 1
Used as a coagulant in the rubber industry.
Use 2
Used as chromatographic reagents, preservatives and reducing agents in the dye and pharmaceutical industries.
Use 3
In the food industry, it is used as bleaching agent, preservative, bulking agent, antioxidant, color retention agent and
preservative.
Use 4
In the printing and dyeing industry, it is used as a dechlorination agent for cotton cloth after bleaching, and as a cotton
scouring aid.
Use 5
The tanning industry is used for leather processing.
Use 6
The chemical industry is used to produce hydroxyvanillin, hydroxylamine hydrochloride, etc. The photosensitive industry is used as developer and so on.
Absolute ethanol refers to an aqueous solution of ethanol with high purity, which is a mixture of ethanol and water. Generally, the ethanol solution with the concentration of 99.5% is anhydrous ethanol.
Ethanol is an important organic solvent, which is widely used in medicine, coatings, sanitary products, cosmetics, oil and other aspects, accounting for about 50% of the total consumption of ethanol. Ethanol is an important basic chemical raw material. 75% ethanol aqueous solution has strong bactericidal ability and is a commonly used disinfectant. Specially refined ethanol can also be used to make beverages. Similar to methanol, ethanol can be used as energy.
Specification
item
value
Classification
Alcohol
CAS No.
64-17-5
Other Names
Ethanol absolute
MF
C2H6O
EINECS No.
200-578-6
Place of Origin
shandong
Grade Standard
Electron Grade, Food Grade, Industrial Grade, Medicine Grade
Purity
70% 75% 95% 96% 99.9%
Appearance
Colorless transparent liquid
Application
Disinfect/Chemical/Solvent/pharmaceuticals
Brand Name
xiangyu
Model Number
xiangyu
CN NO.
32061
UN NO.
1170
Molecular weight
46.07
Package
1L/5L/160KG/800KG/ISO tank
HS CODE
2207100010
Density
0.789g/cm3
Flash point
12â??
Ignition temperature
363â??
Solubility
Miscible with water in any ratio
boiling point
78
