Cartridge heater is one of the tubular heating elements. The heating part is a nickel-chromium heat-resistant alloy wire wound on a magnesium oxide core rod with excellent insulation and thermal conductivity. Between the heating wire and the outer sheath is high-purity magnesium oxide powder as an insulating material, and the air inside is compressed by the machine Into a cartridge heater.
After the main body of the cartridge heater is completed, fixed accessories or threads can be installed according to customer needs. There are many types of fixed accessories or thread structures. Please contact our sales or technical personnel for the best solution.
Advantages:
Small diameter, can be 3-35mm;
The length is not limited, it can be 20-2000mm;
The power is high, which is 2-5 times the power of the normal electric heating tube, and it can achieve a surface area of 20 watts/square centimeter; even a surface area of 60 watts/square centimeter;
It has the characteristics of simple structure, high mechanical strength, high thermal efficiency, safety and reliability, easy installation, long service life, no pollution, and low price. It also saves electricity, is safe to use, can be bent into various shapes, is light, and is easy to disassemble.
MAGMA cartridge heaters are suitable, appropriate devices for applying concentrated heat to solid metal components. Cartridge heater is somewhat similar to tubular heaters structurally but with higher watt densities, usually
custom manufactured to size, sheath, leads, terminals, wattage and voltage as per application or requirement.
Cartridge heaters are used in restricted working areas where localized heating is required for close thermal control.
MAGMA manufactures wide range of cartridge heaters for different numerous applications like heating liquids
(Water, Oil and Glues), Gases such as Air and Solids such as Metal Dies.
MAGMA manufactures 2 types of Cartridge heaters:
HIGH WATT DENSITY
Swaged or High Watt Density Cartridge Heaters
composed of resistance wire (NiCr) spirally wound
on MgO core as per watt density decided. It is inserted in metallic tube selected as per requirement and
space filled with high purity MgO powder. Then it is
swaged to compact the loosely filled powder inside
for achieving high dielectric strength up to the
desired size, diameter and wattage is achieved. The
heat generated by resistance wire is quickly dissipated or transferred to the outer sheath. It is machined
to precise tolerances and straightness.
Swaged or High Watt Density Cartridge Heaters are
fitted into accurately reamed, parallel sided holes for
useful life and fantastic performance. It can operate
at higher temperature and vibration applications.
STANDARD or LOW WATT DENSITY
Low Watt Density Cartridge Heaters comprises of
helical coil (NiCr resistance wire) passed from refractory core and inserted in metallic tube which is predecided by size, diameter and sheath. The remaining space in the tube is MgO powder filled but not
compacted by machine. The end cap is then inserted
on the bottom of the heater and insulated leads are
installed.
Detailed description:
Cartridge heater is cylindrical electrical heating elements. Protected with a stainless steel sheath, their watt density can reach 25 w/cm2 and their operating temperature can go up to 800¡ãc (1472¡ãf)
Mostly cartridge heater is used for heating up solids such as injection presses heating plates or various tools, cartridge heater can also be used for heating up water of gases under certain conditions. Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc . Cartridge heaters are also commonly found in the chemical, electronics, medical equipment, packing and nuclear industries
Various cartridge heater technologies are available. The choice of technology will depend on technical specifications required and the application. Unless you know exactly which product you are looking for, we will recommend you the best solution for your needs.
We are widely known as a reliable High Density Cartridge Heaters Manufacturer, Exporter and Supplier in the worldwide market. The Cartridge Heating Element we offer is designed for use in the applications where limited heat is required. The High Density Cartridge Heaterss are manufactured using pure Magnesium Oxide insulation ensuring high and efficient heating.
Attributes
High watt density
Fast heat transfer efficiency
High dielectric strength
Swaging increases the high thermal conductivity
Uniform heating
Shock and vibration resistant
Built in thermocouple J or K
Advantages
Maximize Heat Transfer
Maximum operating temperature 750oC
Reduce Maintenance Costs
Leak proof welded end cap prevents heater contamination due to the entry of any foreign materials
Our heaters are cylindrically ground to have better surface contact and minimum hole tolerance
Product Details
Wattage tolerance : +5%-+10%
Diameter In MM :
5
6
8
9.5
10
12
12.5
14
16
20
25
Used In
Dies
Hotplates
Platens
Injection molds
Packaging machinery Heaters
All products are using SUS304 or SUS321 seamless stainless steel pipe, MOG holder and MGO head with high temperature 1800C,99% MGO rod,overseas high temperature MGO powder, Cr20Ni80 resistance wire ,Ni-Mn lead wire and Silicone Rubber wire .It suits for mold heating . Large-scele production with competitive price,Good-look appearance of the product and excellent quality .
Technical Parameter:
1. Electric heating tube diameter: 6-23mm;
2. Materials : heat resistant Seamless stainless steel tubes at the operating temperature of up to 700 degree;
3.Input power and power: to be customized as required;
4.Length of electric heating tube: to be customized as required
1)We provide OEM service for electric heating element
2)All products are certificated by ISO9001:2008,CE
Sheath/Casing materials:SUS304/ SUS321/ SUS316/ SUS316L/ SUS310S/ Incoloy800/ Incoloy840/ Copper/ Titanium
Lead Options:Flexible Leads(Internally)/ Externally Connected Leads/ Straight Leads with Clip Support/ 90° Leads/ 90° Leads with Clip
Material of Lead Wire/Cable:Silicone cable /Silicone fiberglass cable/Pure Nickel Cable/Teflon cable/PVC cable and Special Cable
Lead Protection:Straight Strain Relief Spring/ Stainless Steel Braid/ Stainless Steel Armor/ Right Angle Elbow/
End cap:Ceramic end (standard)/ Cement/ Epoxy/ R
Detailed description:
Cartridge heater is cylindrical electrical heating elements. Protected with a stainless steel sheath, their watt density can reach 25 w/cm2 and their operating temperature ca
Mostly cartridge heater is used for heating up solids such as injection presses heating plates or various tools, cartridge heater can also be used for heating up water of gases under certain conditions. Widely used for 1;¡¥s
Freeze protection and deicing of equipment in cold climates or applications
Detailed description:
Cartridge heater is cylindrical electrical heating elements. Protected with a stainless steel sheath, their watt density can reach 25 w/cm2 and their operating temperature can go up to 800¡ãc (1472¡ãf)
Mostly cartridge heater is used for heating up solids such as injection presses heating plates or various tools, cartridge heater can also be used for heating up water of gases under certain conditions. Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc . Cartridge heaters are also commonly found in the chemical, electronics, medical equipment, packing and nuclear industries
Various cartridge heater technologies are available. The choice of technology will depend on technical specifications required and the application. Unless you know exactly which product you are looking for, we will recommend you the best solution for your needs.
All products are using SUS304 or SUS321 seamless stainless steel pipe, MOG holder and MGO head with high temperature 1800C,99% MGO rod,overseas high temperature MGO powder, Cr20Ni80 resistance wire ,Ni-Mn lead wire and Silicone Rubber wire .It suits for mold heating . Large-scele production with competitive price,Good-look appearance of the product and excellent quality .
Detailed description:
Cartridge heater is cylindrical electrical heating elements. Protected with a stainless steel sheath, their watt density can reach 25 w/cm2 and their operating temperature can go up to 800¡ãc (1472¡ãf)
Mostly cartridge heater is used for heating up solids such as injection presses heating plates or various tools, cartridge heater can also be used for heating up water of gases under certain conditions. Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc . Cartridge heaters are also commonly found in the chemical, electronics, medical equipment, packing and nuclear industries
Various cartridge heater technologies are available. The choice of technology will depend on technical specifications required and the application. Unless you know exactly which product you are looking for, we will recommend you the best solution for your needs.
Raphy
All products are using SUS304 or SUS321 seamless stainless steel pipe, MOG holder and MGO head with high temperature 1800C,99% MGO rod,overseas high temperature MGO powder, Cr20Ni80 resistance wire ,Ni-Mn lead wire and Silicone Rubber wire .It suits for mold heating . Large-scele production with competitive price,Good-look appearance of the product and excellent quality .
Diameter
3.0mm to 85mm
Diameter tolerance
0mm~0.08mm
Length tolerance
�±1mm
Cold zone
5~15mm from lead wire; 3~10mm at the bottom
Max surface loading
40w/cm^2
Voltage
1.5V~440V
Insulation resistance
500ohm
Temperature tolerance
�±3C
Shape
Straight/ L/ Square/ Split type/ Special-shaped
Material of lead wire
Silicone rubber; PTFE; High Temperature Fiberglass; Metal hose protection; Metal braided
Thermocouple wire
K type,J type,E type ,PT100
Method of lead wire
Internal wire(Swaged) and External wire (Cripmed)
All products are using SUS304 or SUS321 seamless stainless steel pipe, MOG holder and MGO head with high temperature 1800C,99% MGO rod,overseas high temperature MGO powder, Cr20Ni80 resistance wire ,Ni-Mn lead wire and Silicone Rubber wire .It suits for mold heating . Large-scele production with competitive price,Good-look appearance of the product and excellent quality .
Diameter
3.0mm to 85mm
Diameter tolerance
0mm~0.08mm
Length tolerance
�±1mm
Cold zone
5~15mm from lead wire; 3~10mm at the bottom
Max surface loading
40w/cm^2
Voltage
1.5V~440V
Insulation resistance
500ohm
Temperature tolerance
�±3C
Shape
Straight/ L/ Square/ Split type/ Special-shaped
Material of lead wire
Silicone rubber; PTFE; High Temperature Fiberglass; Metal hose protection; Metal braided
Thermocouple wire
K type,J type,E type ,PT100
Method of lead wire
Internal wire(Swaged) and External wire (Cripmed)
TL-340 Cartridge heater coiling machine is used to wind metal wire on the MgO rod.
1 Step motor drive, the pitch can be adjusted.
2 PLC control, easy operation.
3 Stable performance, high production.
4 Easy to change different specification.
Main technical parameters:
1. Power supply: Single phase AC220í+10% 50HZ
2. Power: 300W
3. Applicable diameter: í_ 21mm
4. Applicable length: 60í½800mm
5. Size: 1560*600*1220mm
The products of this company are mainly applicable to chemical equipment, plastic forming and auxiliary equipment, sauna equipment, electric heating boilers, kitchen equipment, industrial cleaning equipment, commercial refrigerating equipment, commercial heaters, commercial air-conditioning and drinking equipment, solar energy equipment, electric frying equipment, wave peak welding electronic automated equipment, etc. For products, we always follow the principle of top quality and efficiency to win over clients and perform the most rigorous standards so as to ensure that the products are always in their optimal state. Therefore, the electric heating tubes and heating tube products provided by this company are in their dominating superiority in operation functions, security and service life.
1.Tube material: sus304, sus321, sus316l, sus310s, inco840.
2.Electric heating tube diameter : ¦6.6, ¦8.0, ¦10.0, ¦11.0, ¦12.0, ¦14.0, etc
3.Sealing patterns: heat resistance epoxy, glass.
4.Electrical performance: insulation resistance value is over 10000m+ and leakage current less than 0.5ma after being placed in cooling room for more than 1 year.
5.Input power and power:to be customized as required.
