specifications:sensor: electrochemical carbon monoxide sensor
detecting range: 0-999ppm
sensitivity: 5ppm
error: ¡¨¤10% +15ppm
the detecting precision is affected by detector itself and the temperature and humidity of the installation environment
the best installation environment: 20
numerical readings and note: 3-digit lcd display of levels
normal reading: 0
alarm readings: 30 - 999ppm
battery capacity display: full, ok, low, dead
sensor performance display: malfunction
alarm modes: sound, beep, hummer
light: red led flashing
installation: wall and table
power supply range: 110/220/230-240v ac
backup battery: 1 x 9v alkaline battery
working temperature: 0 - 60¡ãc
relative humidity: <98% rh
static current: <0.3ma
alarm current: <100ma
•the responding time of this co alarm fully comply with the usa ul2034 specifications regarding sensitivity:co level (ppm):70ppm
150ppm
400ppm
700ppm
responding time range:60-180 minutes
10-50 minutes
4-15 minutes
2-6 minutes
•the responding time of this co alarm fully comply with the en50291 specifications regarding sensitivity:co level (ppm):50ppm
100ppm
300ppm
400ppm
Hot wire type sensor
Power110vac/220vac/230vac 9v-20vdc
Alarm density carbon monoxide150ppm+-50%
Interconnecting gas detector
(1)circuit for normally closed rely contacts
(2)circuit for normally open rely contacts
(3)operating frequency 433 mhz/315mhz (optional
Hot wire type sensor
Power110vac/220vac/230vac 9v-20vdc
Alarm density carbon monoxide150ppm+-50%
Interconnecting gas detector
(1)circuit for normally closed rely contacts
(2)circuit for normally open rely contacts
(3)operating frequency 433 mhz/315mhz (optional
Feature:
Carbon monoxide detector
1. Mcu processing adopted.
2. Connect modern¡§a»s / n.O
3. Auto check and indication for malfunction.
4. Induced co
5. Best adaptability with environment.
6. Sensor with high stability.
7. Auto reset function
8. Auto drift compensation added.
9. Jointed fan exhaust appended.
10. Ceiling mounted.
AK-200FC/C3
Product Description:
1. Model: AK-200FC/C3
2. Electrochemistry type sensor(Japan)
3. Gas detected: carbon monoxide
4. Size: 100mm*35mm
5. Working voltage: AC220/AC110, 12VDC-20VDC
6. Additional function: can work with solenoid valve or manipulator or exhaust fan
7. Networking: wired networking(NO, NC)
8. Wireless networking mode: 315MHZ/433MHZ (2262 OR 1527)
9. Patent No.: 200830104026.6
10.Options of gas density and alarm level:
EN (EN50291)
Density(PPM) 50 100 300 400
Reaction time ( minutes) 60-90 10-40 Less than 3 Immediately.
CN (CNHINA)
Density(PPM) More than 150
Reaction time(seconds) 5.
Detection gas
CO
Measurement Range
0~1000ppm
Max detecting concentration
2000ppm
Sensitivity
(3~12)nA/ppm
Resolution ratio
1ppm
Response time(T90)
30S
Load resistance(recommend)
1000
Repeatability
<3%output value
Stability(/month)
<10%
Output Linearity
linear
Zero drift
10ppm
Storage temperature
Storage Humidity
15%-90%RH
Pressure range(kPa)
90-110
Anticipated using life
5 years
Carbon Blocks used in furnace having a great alternative against Petcoke.
As it has high melting power and cheap as compared to Petcoke.
Here in India, we are a supplier and exporters of Carbon blocks.
Granular Activated Carbon Products range from the size 0.2mm to 3.75mm. Granular Activated Carbon has relatively larger particles size compared to powdered activated carbon and consequently, presents a smaller external surface. Powdered Activated Carbon Powdered Activated Carbons are small activated carbon particles, with a size that is predominantly less than 0.075 mm.
Activated Carbon is used worldwide in purification of Water, Air, etc. We are producers Dura specie of Palm Kernel Shells Powder & Pellets Activated Carbon, with over 1600 Iodine level and equally high level of Harness.
Activated carbon made from raw organic material such as coconut shell. The raw material of activated carbon pulverized and sieved into appropriate and uniform particle sizes. Carbon has been used as an adsorbent for centuries. Activated carbon is a particularly good adsorbent due to its high surface area to volume ratio.
Grade: 1. Carbon Black PL330J
2. Carbon Black PL330C
3. Carbon Black PL330C
4. Carbon Black PL550C
5. Carbon Black PL550B
6. Carbon Black PL550C
7. PL660B Beads
8. Carbon Black P330
9. Carbon Black P550
10. PL772B Beads
Purity: 1.OAN (ml/100 gm) >90
2.OAN (ml/100 gm) >90
3.OAN (ml/100 gm) >95
4.OAN (ml/100 gm) >100
5.OAN (ml/100 gm) >100
6.OAN (ml/100 gm) >100
7.DBP No (OAN) (cc/100 gm) >100
8.DBP No (OAN) (cc/100 gm) >100
9.DBP No (OAN) (cc/100 gm) >105
10.DBP No (OAN) (cc/100 gm) >90
Actual price will be provided after your enquire.
Carbon black can be used in tire and rubber products reinforcement, It is pure black powder or ganular, and has high reinforcement capacity for rubber products and tire manufacture, and could increase rubber service life.
â?¢ Analysis methods: according to GB3778-2021 Product Standards.
We can all is tailor the specification to meet customer choice.
packing:
1000kg(1MT) bag, 500kg bag, and 20kg bag depends on the specific requirement of customers.
Sale Offer Carbon anode FC 90% -96% , clean , containers will be loaded full capacity.
Our monthly supplying capacity 1000 ton
1-Carbon-95-97-%
2-Sulphur-0.95-%
3-Ash Content-1-%
4-V-M 0.30-%
5-Moisure 0.90-%
Selected Anthracite Coal Granular Activated carbon for amine purify ,remove EDA, MEDA, DIPA, etc
Granular Coal based activated carbon is made from coal though high temperature activation .It is black in appearance, non-toxic and tasteless, with large pores. It is featured by strong adsorption capacity, high wear-resistant performance etc. It is evtensively applied to solvent recovery, catalyst carriers, gas adsorption and water purification in the field of chemicals, environmental protection, power plant, electronics, petrochemical industry, farming, medicine, marine transportation.
Packing
25kg PVC bags+1MT big bag or as customers'requested
Trade terms
FOB CNF CIF
Payments
terms
1).T/T 30%advance ,
2).the balance against copy of B/L
Delivery time
After we receive deposit within 7-10days
Sample
Sample is free within 1kgs
