Carbon Electrode Paste / Soderberg Electrode Paste Quality Specification: At the customers end the paste is fed in the upper part of the electrode it softens and melts forming the shape of the electrode casting. Flow ability of carbon electrode paste is essential for proper operation of electrode. It is important that the paste flows at a reasonable temperature and fills the casting of the electrode, maintaining a consistent mixture of components. The paste then gets baked to a solid mass as it moves down and is capable of passing the required current to the furnace charge. The plasticity of paste , the measure of its flow ability is controlled in the mixer by adjusting the binder content or percentage of coke fines. The lower baked part of the electrode is the final electrode product. The physical properties of this paste are of vital importance to ensure proper electrode operation without breakages. Green paste: A) Plasticity : 30-35%, 35-40% (or as per buyers requirement ) B) V.M. : 12-14% C) ash : 0.5% max D) f.C. : 86% min E) Apparent density : 1.58gm/ccmin. Baked paste : A) f.C. : 99% min B) porosity : 22-24% C) Apparent density : 1.36gm/cc min D) ccs : 250kg/cm2 min E) electrical resistivity : 70-90 micro ohm meter. Size : mould of 24ö dia & 4ö thick (wt. Approx 46kg. To 48 kg. Per block). 24" dia & 4"thick approx 46 to 48 per block. Size in briquette form or as per buyers requirement can also be made available.
Quality specification:
At the customerÆs end the paste is fed in the upper part of the electrode it softens and melts forming the shape of the electrode casting. Flow ability of carbon paste is essential for proper operation of electrode. It is important that the paste flows at a reasonable temperature and fills the casting of the electrode, maintaining a consistent mixture of components. The paste then gets baked to a solid mass as it moves down and is capable of passing the required current to the furnace charge. The plasticity of paste , the measure of its flow ability is controlled in the mixer by adjusting the binder content or percentage of coke fines. The lower baked part of the electrode is the final electrode product. The physical properties of this paste are of vital importance to ensure proper electrode operation without breakages.
Green paste:
A) Plasticity : 30-35%, 35-40% (or as per buyerÆs requirement )
B) V.M. : 12-14%
C) ash : 0.5% max
D) f.C. : 86% min
E) Apparent density : 1.58gm/ccmin.
Baked paste :
A) f.C. : 99% min
B) porosity : 22-24%
C) Apparent density : 1.36gm/cc min
D) ccs : 250kg/cm2 min
E) electrical resistivity : 70-90 micro ohm meter.
Size : mould of 24ö dia & 4ö thick
(wt. Approx 46kg. To 48 kg. Per block).
We are your reliable source for high-quality welding electrodes that deliver exceptional performance in diverse welding applications. We recognise that the welding industry demands products that are durable, efficient, and capable of producing superior welds. Our unique challenge lies in ensuring that the welding electrodes we import adhere to stringent quality standards. To address this, we partner with established manufacturers who have a proven track record of delivering reliable welding products. We conduct comprehensive quality control checks on each batch of welding electrodes, verifying their chemical composition, tensile strength, and welding performance. By doing so, we guarantee that the welding electrodes we supply consistently meet or exceed industry standards, enabling our customers to achieve impeccable welding results.
56656 Carbon Electrode Paste Suppliers
Short on time? Let Carbon Electrode Paste sellers contact you.
(1) Regular power graphite electrode( RP grade Graphite Electrode) . Graphite electrode with current density less than 17a / cm2 is allowed to be used in common power electric furnaces for steelmaking, silicon smelting and yellow phosphorus smelting.
(2) Oxidation resistant coating graphite electrode. A graphite electrode coated with an anti-oxidation protective layer (graphite electrode anti oxidant). The formation of both conductive and high temperature oxidation resistant protective layer can reduce the electrode consumption (19% ~ 50%), prolong the service life of the electrode (22% ~ 60%), and reduce the electric energy consumption of the electrode. The popularization and application of this technology can bring such economic and social effects as follows: 1. The unit consumption of graphite electrode is less, and the production cost is reduced to a certain extent. For example, according to the consumption of 35 graphite electrodes per week and 165 refining heats of LF refining furnace in a steel-making plant without shutdown in the whole year, 373 (153 tons) electrodes can be saved every year by using graphite electrode oxidation resistance technology, and RMB 2585700 can be saved by RMB 16900 per ton of ultra-high power electrode per year. 2 The graphite electrode consumes less electricity, saves the unit electricity consumption of steelmaking, saves the production cost, saves energy! 3. Because the graphite electrode is replaced less times, the labor amount and risk coefficient of operators are reduced, and the production efficiency is improved. 4 Graphite electrode is a high consumption and high pollution product, which has a very important social significance in the days of promoting energy conservation, emission reduction and environmental protection. This technology is still in the stage of research and development in China, and some domestic manufacturers have begun to produce it. It is widely used in Japan and other developed countries. At present, there are also companies that import the anti-oxidation protective coating in China.
(3) High power graphite electrode (HP grade Graphite Electrode). Graphite electrode with current density of 18-25a / cm2 is allowed to be used in high power electric arc furnace for steelmaking.
(4) Ultra high power graphite electrode( UHP grade Graphite Electrode). Graphite electrode with current density greater than 25A / cm2 is allowed. It is mainly used in ultra high power EAF.
(1) Regular power graphite electrode( RP grade Graphite Electrode) . Graphite electrode with current density less than 17a / cm2 is allowed to be used in common power electric furnaces for steelmaking, silicon smelting and yellow phosphorus smelting.
(2) Oxidation resistant coating graphite electrode. A graphite electrode coated with an anti-oxidation protective layer (graphite electrode anti oxidant). The formation of both conductive and high temperature oxidation resistant protective layer can reduce the electrode consumption (19% ~ 50%), prolong the service life of the electrode (22% ~ 60%), and reduce the electric energy consumption of the electrode. The popularization and application of this technology can bring such economic and social effects as follows: 1. The unit consumption of graphite electrode is less, and the production cost is reduced to a certain extent. For example, according to the consumption of 35 graphite electrodes per week and 165 refining heats of LF refining furnace in a steel-making plant without shutdown in the whole year, 373 (153 tons) electrodes can be saved every year by using graphite electrode oxidation resistance technology, and RMB 2585700 can be saved by RMB 16900 per ton of ultra-high power electrode per year. 2 The graphite electrode consumes less electricity, saves the unit electricity consumption of steelmaking, saves the production cost, saves energy! 3. Because the graphite electrode is replaced less times, the labor amount and risk coefficient of operators are reduced, and the production efficiency is improved. 4 Graphite electrode is a high consumption and high pollution product, which has a very important social significance in the days of promoting energy conservation, emission reduction and environmental protection. This technology is still in the stage of research and development in China, and some domestic manufacturers have begun to produce it. It is widely used in Japan and other developed countries. At present, there are also companies that import the anti-oxidation protective coating in China.
(3) High power graphite electrode (HP grade Graphite Electrode). Graphite electrode with current density of 18-25a / cm2 is allowed to be used in high power electric arc furnace for steelmaking.
(4) Ultra high power graphite electrode( UHP grade Graphite Electrode). Graphite electrode with current density greater than 25A / cm2 is allowed. It is mainly used in ultra high power EAF.
Carbon Blocks used in furnace having a great alternative against Petcoke.
As it has high melting power and cheap as compared to Petcoke.
Here in India, we are a supplier and exporters of Carbon blocks.
Shippment:20-24MT in one container or allocation of cargo
27MT for one 20 feet container (25kgs small bags)
20MT for one 20 feet container(1MT big bags)
Ningxia carbon valley International Co. Ltd to provide carbon additive, cold ramming paste, carbon block/brick, graphite block, electrically calcined anthracite coal, electrode paste, silicon carbide, CPC,GPC,The products are sold to Japan, Vietnam,Taiwan, Korea, Malaysia, India, America, Kazakhstan, etc.
Carbon black can be used in tire and rubber products reinforcement, It is pure black powder or ganular, and has high reinforcement capacity for rubber products and tire manufacture, and could increase rubber service life.
â?¢ Analysis methods: according to GB3778-2021 Product Standards.
We can all is tailor the specification to meet customer choice.
packing:
1000kg(1MT) bag, 500kg bag, and 20kg bag depends on the specific requirement of customers.
Granular Activated Carbon Products range from the size 0.2mm to 3.75mm. Granular Activated Carbon has relatively larger particles size compared to powdered activated carbon and consequently, presents a smaller external surface. Powdered Activated Carbon Powdered Activated Carbons are small activated carbon particles, with a size that is predominantly less than 0.075 mm.
Activated Carbon is used worldwide in purification of Water, Air, etc. We are producers Dura specie of Palm Kernel Shells Powder & Pellets Activated Carbon, with over 1600 Iodine level and equally high level of Harness.
Activated carbon made from raw organic material such as coconut shell. The raw material of activated carbon pulverized and sieved into appropriate and uniform particle sizes. Carbon has been used as an adsorbent for centuries. Activated carbon is a particularly good adsorbent due to its high surface area to volume ratio.
Grade: 1. Carbon Black PL330J
2. Carbon Black PL330C
3. Carbon Black PL330C
4. Carbon Black PL550C
5. Carbon Black PL550B
6. Carbon Black PL550C
7. PL660B Beads
8. Carbon Black P330
9. Carbon Black P550
10. PL772B Beads
Purity: 1.OAN (ml/100 gm) >90
2.OAN (ml/100 gm) >90
3.OAN (ml/100 gm) >95
4.OAN (ml/100 gm) >100
5.OAN (ml/100 gm) >100
6.OAN (ml/100 gm) >100
7.DBP No (OAN) (cc/100 gm) >100
8.DBP No (OAN) (cc/100 gm) >100
9.DBP No (OAN) (cc/100 gm) >105
10.DBP No (OAN) (cc/100 gm) >90
Actual price will be provided after your enquire.
