CA-212 has been designed to ensure high accuracy in power factor regulation and excellent utilization of capacitor banks and relays in three phase 3 wire electrical grid common range for all network voltages from 100V to 440V system reactive power compensation front panel is equipped with a 3-digits 7 segments display to show the present value of power factor voltage and line current.
Max 12 steps relay output for contactor easy commissioning optional LCD display screen(provide power monitor function and CT ratio setting).
FEATURES
I / U / COS measurement
Three digital LED display
Max 12 control steps (default 6 steps)
Used in three-phase balance gird
Self-powered from bus line
Turmeric contains curcumin, a substance with powerful anti-inflammatory and antioxidant properties. Most studies used turmeric extracts that are standardized to include large amounts of curcumin. Curcumin Boosts Brain-Derived Neurotrophic Factor, Linked to Improved Brain Function and a Lower Risk of Brain Diseases, Heart Disease, Preventing and Treating Alzheimer's Disease, Arthritis Patients Respond Very Well to Curcumin Supplements.
Turmeric contains curcumin, a substance with powerful anti-inflammatory and antioxidant properties. Most studies used turmeric extracts that are standardized to include large amounts of curcumin. Herbal Turmeric Curcumin Boosts Brain-Derived Neurotrophic Factor, Linked to Improved Brain Function and a Lower Risk of Brain Diseases, Heart Disease, Preventing and Treating Alzheimer's Disease, Arthritis Patients Respond Very Well to Curcumin Supplements.
Belt press juicing machine for fruit vegetable
Use for :
01.fruit juice 02.vegetable dehydration or juce 03.enzyme juice
04.Extraction of medicinal juice
1. High lift and large flow, strong pumping force, not easy to block, precision casting pump body, lasting work, high efficiency and energy saving, after-sales guarantee
2. Long service life. The product is equipped with a new automatic deviation correction and tension system, automatic operation, uniform distribution of materials, extended filter bag life, and long bearing service life
3. Rust-proof and corrosion-resistant, tough shell, stable operation, unique oblique lengthened wedge design, more stable operation and low noise
4. The treatment effect is good. Two sets of independent backwashing systems are adopted. The multi-roll diameter decreasing backlogs are compact in layout and the filter cake has high solid content.
5. Efficient, convenient and ultra-long gravity dewatering area, with large bearing capacity, strong processing capacity, low power consumption and low operating cost
6. Juice yield 85%
Small capacity 500-3000kg/h,filter belt width 500-2000mm,power 1.5-3kw,
filter belt speed 1.5-3.5m
Big capacity 3-20T/hour,power 14.7-41kw ,machine size length 3100-5420mm
Width 1475-3430mm high 1820-2420mm
2-head packaging machine (also can 4-18head according different capacity choice)
Packaging speed 15bags/min
Bag length 90-320mm
Bag width 80-210mm
Overall weight 400kg
Power 1.8kw/220v
Packaging capacity 20-1000ml
Outer packaging size 820 x1220 x 2500mm
Packaging form Back sealing
This machine is an intelligent weighing automatic quantitative packaging machine with four scales and microcomputer control. Suitable for quantitative packaging of granular materials such as miscellaneous grains, nuts ,pesticides, fertilizers, veterinary drugs, premixes, additives, laundry detergent, salt, monosodium glutamate, white sugar, seeds, rice, snacks, hardware, etc.
Performance characteristics:
1. High precision digital sensors enable precise measurement to be achieved instantly.
2. The microcomputer control system is technologically advanced, easy to operate, and more reliable to use.
3. Fast and slow vibration feeding, automatic correction of errors, achieving high-precision packaging.
4. Four scales work alternately, with fast packaging speed.
5. High quality stainless steel is used for the material contact part, which is anti-corrosion, dust-proof, and easy to clean.
Host configuration:
This machine is equipped with a dual CPU microcomputer control system, a 5-inch LCD display in Chinese or English, a user-friendly operation interface, automatic cursor detection and tracking, and simpler operation. Equipped with high-precision stepper motors to ensure the accuracy of the cutting position of each packaging bag.
3392 Ca212 100V To 440V Power Factor Correction Suppliers
Short on time? Let Ca212 100V To 440V Power Factor Correction sellers contact you.
During last decade Guar has immerged as an important industrial raw material and Produced by man for thousands of years. India has been the single largest producer and exporter of Guar gum accounting for more than 80 percent of the global output and trade.
Guar has now assumed a larger role among the domesticated plants due to its unique functional properties.
India Ranks First in the production of guar which is grown in the North Western part of the Country which mainly includes the states of Rajasthan, Gujarat, Haryana and Punjab. Other main countries are Pakistan, U.S.A and Brazil
The by-product of Guar Gum industry consisting of the outer seed coat and germ material is called guar meal. The Guar meal after gum Extraction is a potential source of protein and contains about 42% crude protein which is one and a half times more than the level of protein in guar seed. The protein content in guar meal is well comparable with that of oil cakes. It is used as a feed for livestock including poultry. Guar meal contains two deleterious factors i.e. residual guar gum and trypsin inhibitor, Toasting of Guar Gum improves its nutritive value in chicks. Toasted guar Meal can be used in limited quantity i.e. Up to 10% in Poultry diet. However it can replace groundnut cake by almost 100% in animal feeds.
Guar Gum (Galactomanan) is a high molecular weight carbohydrate polymer made up of a large number of mannose and galactose unit linked together. The crude Guar Gum is a greyish white powder 90% of which dissolves in water. It is non ionic polysaccharide based on the milled endosperm of the guar bean whose average.
Composition is:
Hydrocolloid: 23%
Fats: 40%
Proteins: 34%
The most important property of the Guar is its ability to hydrate rapidly in cold water to attain a very high viscosity at relatively low concentrations. Its specific colloidal nature gives the solution an excellent thickening power which is 6 to10 times thicker than that obtained from starch. It is stable over a wide range of PH and it also improves the flow ability and pump ability of the fluid. It is a superior friction loss reducing agent.
Discover the pinnacle of purity and potency with Manuka Honey 1200+. Sourced directly from the untouched wilderness of New Zealand, our Manuka honey features an impressive Unique Manuka Factor (UMF) rating of 1200+, representing the highest standard in natural quality and efficacy. This honey offers unparalleled antibacterial properties, making it a powerful ally for health and wellness. Its rich, velvety texture and deep, aromatic flavors provide a luxurious culinary experience, while its therapeutic qualities support overall wellbeing.
Experience the pure essence of New Zealand with Homeland Manuka Honey 50+. Harvested from the pristine wildlands of New Zealand, this premium Manuka honey is renowned for its exceptional quality and distinctive flavor. With a Unique Manuka Factor (UMF) rating of 50+, our honey guarantees high levels of methylglyoxal, contributing to its powerful antibacterial properties. Perfect as a luxurious spread, a potent ingredient in your beauty regimen, or as an enhancer to your wellness routine, Homeland Manuka Honey 50+ is not just a treat, but a splendid health supplement. Indulge in the rich, creamy texture and enjoy a taste of New Zealand's finest with every spoonful.
The CAT988 with the 3408 engine is a powerful machine designed for heavy-duty applications, including container handling. Here are some key specifications:
Engine: CAT 3408 DITA (Direct Injection Turbocharged Aftercooled)
The CAT 3408 engine is a V8 engine, meaning it has 8 cylinders arranged in a V configuration.
Net Power: 538 hp (SAE J1349:2011)
Engine Power: 580 hp (ISO 14396:2002)
Gross Power: 588 hp (SAE J1995:2014)
Maximum Capacity: 50,000 pounds (as indicated on the boom arm in the image you provided)
Fuel Efficiency: Features like Economy Mode help save on fuel while maintaining productivity
Durability: Built with advanced filtration systems for extended performance and reliability
Productivity: Superior digging, higher bucket fill factors, and reduced dig times
We have 4sets of used Detroit generators that were used as emergency power sources (Standby only) at a municipal water drainage plant in Korea. Please review the attached documents and assess
ENGINE SPECIFICATION
ENGINE MODEL Detroit Diesel 8163-7416 1232HP
ENGINE NO. 16VF013546
RPM 1,800
Cylinder 16
Injection method Direct injection
Cooling method Water Cooled
Fuel consumption rate 246â??/h
GENERATOR SPECIFICATION (AC Generator, 3Ã??, 60Hz, Brushless type
Generator Model DIG 4800
Emergency output 990 kVA / 792 kW
Continuous output 900kVA / 720kW
Voltage and Current 600 v x 86.6 A
Revolution 1800RPM
Excitation Voltage/Current 65V/10A
Power Factor 80%
Insulation Class F
Rated power : 5KW
Pure sine wave solar inverter
Output power factor 1
Built-in 80A MPPT solar charger
Built-in anti-dust kit for harsh environment
Support parallel operation up to 3 units (available for 3KW-5.5KW 48V)
WIFI remote monitoring (optional)
Compatible to generator
Rated power : 3KW
Pure sine wave solar inverter
Output power factor 1
Built-in 80A MPPT solar charger
Built-in anti-dust kit for harsh environment
WIFI remote monitoring (optional)
Compatible to generator
PV1800 VHM is a multi-functional inverter/charger, combining functions of inverter, solar charger and battery charger to offer uninterruptible power
support in portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current,
AC/solar charger priority, and acceptable input voltage based on different applications.
* PURPOSE
customers using FBC boilers (Particularly underbed feed FBC boilers) for the protection of inbed coils against erosion potential by applying highly abrasive resistant refractory on inbed coils above fuel feed system.
BACKGROUND
* Two of such actions are providing special alloy studs on inbed coils and applying highly abrasive resistant refractory on the outer bottom loops of inbed Coils which are above the fuel feed nozzles.
* GANESHAS has taken number of approaches to identify the key factors affecting erosion rates with an objective to enhance the life of inbed tubes as well as implementing the corrective action to reduce the erosion rates.
Phosphate coatings are often used to protect steel parts against rusting and other types of corrosion
* Erosion of inbed coils in fluid bed combustor is unavoidable phenomenon however the rate of metal wastage and thus the life of tubes depends on various factors like ash & fuel properties, design of Combustor / feeding system, flue gas velocities operating conditions etc. It has been also observed that maximum erosion prone inbed coils are those which come above fuel feed nozzles and an area of approximately 1 to 1.5 mts around fuel feed systems are badly affected.
APPLICATION
Phoscast-90 XR can be applied by ramming with wooden mallet having adequately large head @" dia x 5" length x 10â?? Jong handle). The desired lining or repair thickness is built up in several courses while ramming the mass to uniform thickness. Phoscast refractory should never be trawled to obtain smooth surface; ramming only should finish surface. Any excess mass is to be sliced off with trowel edge and then finished by ramming again for bed coil. Tube application of AFBC boiler, the material pasty mass should be finger pressed into the studs of the tube with maximum force. Finish should be given by pressing the hand palm against material applied, using surgical type thin rubber hand gloves.
Cyclone Dust Collector is a system used to enhance the quality of air released from industrial and commercial processes by collecting dustand other impurities from air or gas. Designed to handle high-volume dust loads, a dust collector system consists of a blower, dust filter, a filter-cleaning system, and a dust receptacle or dust removal system. It is distinguished from air purifiers, which use disposable filters to remove dust.
Multiple-cyclone separators consist of a number of small-diameter cyclones, operating in parallel and having a common gas inlet and outlet, as shown in the figure, and operate on the same principle as single cyclone separatorsâ??creating an outer downward vortex and an ascending inner vortex.
Multiple-cyclone separators remove more dust than single cyclone separators because the individual cyclones have a greater length and smaller diameter. The longer length provides longer residence time while the smaller diameter creates greater centrifugal force. These two factors result in better separation of dust particulates. The pressure drop of multiple-cyclone separators collectors is higher than that of single-cyclone separators, requiring more energy to clean the same amount of air. A single-chamber cyclone separator of the same volume is more economical, but doesn't remove as much dust.
Cyclone separators are found in all types of power and industrial applications, including pulp and paper plants, cement plants, steel mills, petroleum coke plants, metallurgical plants, saw mills and other kinds of facilities that process dust.
I / O interfaces Data interface: 1 Ã?? USB2.0 +2 Ã?? USB3.0
Video Interface: VGA, HDMI
Audio interface: headphone / microphone combo interface
Other interfaces: RJ45 (network interface), power connector
Reader: Multi-in-1 card reader
Input Devices Pointing device: Touchpad
Keyboard Description: Full-size keyboard
Power Description Battery: 6-cell lithium battery, 5900 mA
Life time: 5 hours, the specific time depending on use environment
Power adapter: 100V-240V 90W AC power adapter adaptive
Exterior Laptop Weight: 2Kg
Length: 339.2mm
Width: 239.5mm
Thickness: 26.4mm
Shell material: composite material
Case Description: Black
Notebook accessories Packing list: Host x1 notebook
Power adapter x1
Power cord x1
Manual x1
Warranty card x1
Used Engines
HS Code 840820
PRICE = US$1,800/PIECE CIF
ORIGIN: THAILAND
PACKAGE: TONS
MIN ORDER:5 PIECES
DESCRIPTION
There are several types of engines used in automobiles. The car engine types are generally described based on two factors: the fuel type and engine layout/number of cylinders (cylinder configuration. One of the most common types of engines is petrol and diesel engines. But that's a generic way to describe a car engine.
SPECIFICATION
General Engine Specifications
Basic Engine Specifications
I-6, 4-Stroke-Cycle-Diesel
Displacement .......................................................................... 12.88 L (in3)
Rated engine speed .................................................................... 2300 rpm
High idle speed ........................................................................... 2530 rpm
Low idle speed (programmable) ................................................... 550 rpm
Peak torque ......................................................... 3,355 N m @ 1200 rpm
Bore ....................................................................................... 135 mm (in)
Stroke ...................................................................................... 150 mm (in)
Aspiration .................................. Supercharged-Turbocharged-Aftercooled
Governor ............................................................................................. ECU
Fuel system type .................................................................. Common Rail
Length ........................................................................... 1960 mm (77.1 in)
Length to flywheel housing ........................................... 1476 mm (58.1 in)
Width ............................................................................. 1195 mm (47.0 in)
Height ............................................................................ 1117 mm (43.9 in)
Weight, net dry (approx.) ................................................1672 kg (3686 lb)
Rotation (from flywheel end) .......................................... Counterclockwise
Flywheel housing/flywheel .................................................... SAE No. 01M
Flywheel teeth ....................................................................................... 155
Tolerances
Power ............................................................................................... +/- 3%
Exhaust Stack Temperature ............................................................ +/- 8%
Inlet Air Flow .................................................................................... +/- 5%
Intake Manifold Pressure ............................................................... +/- 10%
Exhaust Flow ................................................................................... +/- 6%
Specific Fuel Consumption .............................................................. +/- 3%
Heat Rejection ................................
"Saibago" located along the Yellow River, in Qing Tong Xia, Ning Xia, China. This area has over 1, 200 years of history in cultivating Goji berries. Plentiful sunlight, large temperature differences between day and night, just the right amount of soil moisture content and soluble salts irrigated from the yellow river are all factors that make goji berries grown in this area, the absolute best goji; "Saibago" Goji berries are rich in Vitamin A, B1, B2, B6, C, E. They also contain 18 amino acids, and 21 trace minerals and protein...It is Said to provide "eternal youth" based on its powerful antioxidant and anti-cancer properties. Saibago Ning Xia goji berries will not stick together and is sweet, unlike the goji berries from other areas which will be bitter or sour Or Tend to clump together.
EQUINAS TFO 60i High Quality Inhibited Transformer Oil
EQUINAS TFO 60i is a high-quality inhibited insulating oil with very good dielectric properties and oxidation stability intended for transformers, switchgears, and other electrical equipment. Transformer Oil is a series of products blended using highly refined mineral oil and a selected antioxidant. It is designed for insulating and cooling transformers, oil-immersed switchgear and other electrical insulating applications. Does not contain harmful polychlorinated biphenyls (PCBs).
Applications:
Used as an insulating oil in transformers, switchgear, inductors, condensers, transducers, and similar equipment, also at low temperature in outdoor use It insulates current-carrying parts from each other and from ground, carries away heat, prevents glow discharges, extinguishes electric arcs in switchgear, and impregnates insulating materials
Features and Benefits:
Excellent insulating properties
High dielectric strength (1)
Low power factor
Resists oxidation and deposit formation
Excellent low-temperature properties
Compatible with materials used in transformers
Does not contain any PCBs
Meets or exceeds the IEC 60296
Packages size:
Available in drums and flexibags
Health and Safety:
Based on available information, this product is not expected to produce adverse effects on health when used for applications referred to above and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request through our sales contact office. This product should not be used for purpose other than the applications referred to above. If disposing of used product, take care to protect the environment, follow the local rules and regulations of your local Authority.
EQUINAS TFO 60u High Quality Un-Inhibited Transformer Oil
EQUINAS TFO 60u is a high-quality un-inhibited insulating oil with very good dielectric properties and oxidation stability intended for transformers, switchgears, and other electrical equipment. Transformer Oil is a series of products blended using highly refined mineral oil and a selected antioxidant. It is designed for insulating and cooling transformers, oil-immersed switchgear and other electrical insulating applications. Does not contain harmful polychlorinated biphenyls (PCBs).
Applications:
Used as an insulating oil in transformers, switchgear, inductors, condensers, transducers, and similar equipment, also at low temperature in outdoor use It insulates current-carrying parts from each other and from ground, carries away heat, prevents glow discharges, extinguishes electric arcs in switchgear, and impregnates insulating materials
Features and Benefits:
Excellent insulating properties
High dielectric strength (1)
Low power factor
Resists oxidation and deposit formation
Excellent low-temperature properties
Compatible with materials used in transformers
Does not contain any PCBs
Meets or exceeds the IEC 60296
Packages size:
Available in drums and flexibags
Health and Safety:
Based on available information, this product is not expected to produce adverse effects on health when used for applications referred to above and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request through our sales contact office. This product should not be used for purpose other than the applications referred to above. If disposing of used product, take care to protect the environment, follow the local rules and regulations of your local Authority.
