CH modular, IP20 finger-safe DIN-Rail holders for Class CC, midget and PV fuses
Bussmann series CH DIN-Rail fuse holders are for UL Class CC and
midget fuses, and IEC 10x38mm fuses. They are available with and
without indication in 1-, 2- and 3-pole IP20 finger-safe versions. A variety of accessories extends their application flexibility and they may be ganged together to meet specific application requirements.
Ratings
Volts
600 V (or less) UL
690 V (or less) IEC
1000 Vdc (or less) photovoltaic (PV)
Amps
30 A UL
32 A IEC
SCCR
33 kA photovoltaic
200 kA RMS Sym. (CHCC, CHM*)
* CHM SCCR is fuse interrupting rating dependent.
Agency information
CHCC, CHM; UL Listed Guide IZLT, Recognized Guide IZLT2, File
E14853
CHPV, UL Listed to 4248-19, Guide IZMR, File E348242
CSA File 47235, CHPV and CHM - Class 6225-30, CHCC - Class
6225-01
IEC 60269-2 (CHM, CHPV)
CCC
RoHS compliant
CE
Storage and operating temperature
-4°F (-20°C) to +194°F (90°C) indicating
-4°F (-20°C) to +248°F (120°C) non-indicating
Features
High SCCR rated, UL Listed Class CC holder with optional open
fuse indication for 600 V and 48 Vdc (see catalog number table for
details)
Enhanced safety with IP20 finger-safe construction
UL Recognized midget and IEC 10x38mm holders with factory
assembled neutral pole option
Agency ratings up to 1000 Vdc for use with PV fuses.
Available remote PLC fuse indication module
Wiring flexibility with terminals rated for use with 75°C or 90°C
solid, stranded and fine stranded wire, and fork terminals and
comb busbars. (Use any higher temperature insulations at the
90°C ampacity with appropriate derating.)
Complete range of UL Listed and high SCCR rated one- and
threephase finger-safe comb busbars and power feed lugs
Optional hex head terminal screw makes it easier to achieve
necessary torque values
CH modular, IP20 finger-safe DIN-Rail holders for
Class CC, midget and PV fuses
Bussmann series CH DIN-Rail fuse holders are for UL Class CC and
midget fuses, and IEC 10x38mm fuses. They are available with and without indication in 1-, 2- and 3-pole IP20 finger-safe versions. A variety of accessories extends their application flexibility and they may be ganged
together to meet specific application requirements.
Ratings
Volts
600 V (or less) UL
690 V (or less) IEC
1000 Vdc (or less) photovoltaic (PV)
Amps
30 A UL
32 A IEC
SCCR
33 kA photovoltaic
200 kA RMS Sym. (CHCC, CHM*)
* CHM SCCR is fuse interrupting rating dependent.
Agency information
CHCC, CHM; UL Listed Guide IZLT, Recognized Guide IZLT2, File
E14853
CHPV, UL Listed to 4248-19, Guide IZMR, File E348242
CSA File 47235, CHPV and CHM - Class 6225-30, CHCC - Class
6225-01
IEC 60269-2 (CHM, CHPV)
CCC
RoHS compliant
CE
Wire range
75°C and 90°C Cu
18-4 AWG (0.8-21.1mm2)
Solid, stranded and fine stranded*
* See data sheet 10430 for application details.
Terminals
Single or dual conductors
Comb busbar
Terminal screws
Standard phil-slot
Optional hex head (order by adding -H suffix to the catalog
number, e.g., CHM1DU-H)
Torque
30 lb-in (3.4 Nâ?¢m) maximum
Flammability
UL 94V0, self-extinguishing
Storage and operating temperature
-4°F (-20°C) to +194°F (90°C) indicating
-4°F (-20°C) to +248°F (120°C) non-indicating
Features
High SCCR rated, UL Listed Class CC holder with optional open
fuse indication for 600 V and 48 Vdc (see catalog number table for
details)
Enhanced safety with IP20 finger-safe construction
UL Recognized midget and IEC 10x38mm holders with factory
assembled neutral pole option
Agency ratings up to 1000 Vdc for use with PV fuses.
Available remote PLC fuse indication module
Wiring flexibility with terminals rated for use with 75°C or 90°C
solid, stranded and fine stranded wire, and fork terminals and
comb busbars. (Use any higher temperature insulations at the
90°C ampacity with appropriate derating.)
Complete range of UL Listed and high SCCR rated one- and threephase finger-safe comb busbars and power feed lugs
Optional hex head terminal screw makes it easier to achieve
necessary torque values
KTK fast-acting 13/32" x 1-1/2"supplemental fuse
Fast-acting supplemental fuse.
Black color code (600 Vac max).
For superior protection, Eaton
recommends upgrading to
Bussmann series Low-Peak Class
CC fuses.
Agency information
â?¢ UL Listed, Std. 248-14, Guide JDYX, File E19180, CSA Certified,
C22.2 No. 248.14, Class 1422-01, File 53787, HRC-MISC, RoHS
compliant, CE
Features
â?¢ Black color code for 600 Vac rating
â?¢ Fast-acting for resistive loads
â?¢ Melamine tube construction with nickel-plated bronze endcaps
Typical applications
â?¢ Control circuits
â?¢ Lighting circuit protection
â?¢ Meter circuits
Indicators
High speed square body fuses are available with the following
indicators.
Visual indicator
The indicator situated in one end plate is clearly visible as soon as
the fuse has operated. The minimum rated voltage for operating the
indicator is 20 V.
Type T indicator
The indicator is situated on one cover plate with a cover plate tag
to accommodate an auxiliary switch. The minimum rated voltage for
operating the indicator is 20 V. A special low rated voltage indicator
(1.5 V) is available on request.
Type K indicator
The indicator is situated on the fuse body. It is covered by an adapter
for snap-on mounting of a microswitch. The rated operating voltage
of the indicator is 1.5 V. As a matter of safety, the factory mounted
adapter must not be removed from the fuse.
Microswitches
High speed square body fuses with either Type T or K indicators
can be equipped with a microswitch for remote signaling of fuse
operation. All microswitches have one normally open (NO) and one
normally closed (NC) contact.
Ratings
Volts
690 Vac/500 Vdc (IEC)
700 Vac/500 Vdc (UL)
Amps 6-200 A
IR
CT: IEC 90 kA RMS Sym., 40 kA at 500 Vdc,
UL 200 kA RMS Sym., 50 kA at 500 Vdc
ET, EET, FE and FEE: 200 kA RMS Sym.,50 kA at 500 Vdc
Operating class aR
Agency information
Designed and tested to BS88 part 4 and IEC 60269 Part 4
UL Recognized*
CCC for ET, FE, EET, FEE
CE
35FE
40FE
35FE
45FE
50FE
63FE
71FE
80FE
90FE
100FE
500 Vac/dc (UL), 35 to 1600 A
North American style bolted tags high speed fuses, for the protection
of DC common bus, power converters/rectifiers and reduced rated
voltage starters.
Ratings
Volts
500 Vac (UL)
500 Vdc (35-800 A only)
Amps 35-1600 A
IR
200 kA RMS Sym.
50 kA at 500 Vdc
Agency information
UL Recognized, JFHR2, E91958, FWH-_B (35-200 A) and FWH-_A
(1000 and 1200 A), JFHR2, E56412 FWH-_A (225-800 A)
CSA Class 1422-30, File 53787 (35-1600 A)
CE
FNQ-R Class CC Limitronâ?¢ time-delay,
rejection-type fuse
Time-delay, branch circuit, rejection-type fuse. For superior electrical
protection, Eaton recommends upgrading FNQ-R fuse applications
to Bussmann series Low-Peak LP-CC fuses, see page 1-5. For
dimensions.
Ratings
Volts
600 Vac (or less)
300 Vdc (15-20 A)
32 Vdc (self certified)
Amps 1/4-30 A
IR
200 kA RMS Sym.
20 kA DC (15 and 20 A only)
Agency information
UL Listed, Std 248-4, Class CC, Guide JDDZ, File E4273,
CSA Certified, Class 1422-01, File 53787, RoHS compliant, CE
Features
Class CC rejection feature, with appropriate fuse block, prevents
inserting lesser-rated supplementary fuses
Time-delay compatible with inrush characteristic of small control
transformers
Current limitation at Class CC levels provides maximum
component short-circuit current rating protection
200 kA interrupting rating provides high ratings for control circuit
locations
Typical applications
Line protection, small control transformers
Industrial controls and panels
Isolated, in-line fuse holders
* Our Acid proof tiles, Acid alkali resistant tiles, Chemical resistant tiles are fully vitrified tiles which are manufactured using special non ferrous clay, processed at extremely high temperatures this process causes the raw materials to fuse and form a compact mass with an extremely low water absorption of less than 0.5% resulting in the formation of a very strong body with a flexural strength of 38 N/mm2, solid through color fade proof with a very hard surface Mohs hardness of 7.
* The acid resistant tiles come in a range of sizes and thicknesses from ranging from 8-25mm. Our acid proof tiles meet stringent specification norms of IS 4457:2007 and relevant ASTM/DIN standards which ensure excellent performance in Acid/Alkali/Chemical (expect Hydrofluoric acid and its derivatives).
Corrosion Protection Applications
* Factory Floors subject to corrosion from Chemicals, Acids, Oil & Solvents
* Pickling tank and surrounding areas
* Food & Beverage Industry flooring
* Battery rooms and Control rooms
* Demineralization plants
* Walls of washing and Paint shop areas
* Acid Resistant Tiles Manufacturers India
* Our acid proof tiles provide excellent abrasion resistance, anti-skid properties for worker safety and high aesthetic appeal. We also provide specialized corner tiles for reducing chances for acid attack through construction joints. Our standard sizes are 200x100, 200x200 & 300x300 millimeters.
Catalog symbols:
EV20-(amp) 20 mm diameter
EV25-(amp) 25 mm diameter
EV30-(amp) 30 mm diameter
Description:
Eatons Bussmann® series Electric Vehicle (EV)
fuses for the protection of high power battery
charging and management systems up to 500 Vdc
in ratings from 50 to 400 amps.
Specifications:
Ratings
Volts - 500 Vdc
Amps 50-400 A
Interrupting rating
Max DC 20 kA
Min DC 200%
Agency information
Designed to:
JASO D622
ISO 8820-8
Manufactured under a TS16949 quality system
for compliance with automotive requirements
RoHS compliant
REACH declaration available upon request
Packaging
20 mm fuses: 250 fuses per box
25 mm fuses: 100 fuses per box
30 mm fuses: 100 fuses per box
Features:
Higher voltage rating provides overall system efficiency using smaller, more economical
conductors while meeting the needs of higher voltage battery packs.
Higher interrupting rating protects high capacity battery packs needed for vehicle acceleration and range requirements.
Up to ten times faster opening under high fault current conditions helps assure reliable
protection of circuits and components.
Requires up to 48% less space than conventional high speed fuses to help reduce
space and weight.
Data logging system marks each fuse with a serial number and date code for traceability of Critical to Quality characteristics.
To help project the life of the fuse in your application, unique driving profiles and
conditions can be simulated to verify proper fuse size and performance under a wide range of driving behaviors.
Operation as low as 200% overload provides back up protection to the battery management system.
Can be applied in parallel to realize greater ampacity within sizing guidelines.
SILICON WAFERS are the building blocks of modern technology, they provide the substrate onto which circuits are constructed. We offer Prime, Test, Monitor, SEMI standard, and customized silicon wafers in all diameters from 2�¢?�³ to 300mm. Our Wafers meet the SEMI standards, along with customized options.
Silicon On Insulator (SOI) Wafers: Chips fabricated on SOI wafers achieve 30% faster speeds and 80% lower power demands compared to CMOS devices. The SOI structure consists of three layers: a top active device layer for transistor fabrication, a buried oxide (BOX) insulator layer, and a bottom handle wafer layer.
Silicon Float Zone Wafers: is a crystal growth technique that produces highly pure silicon wafers with fewer impurities than traditional methods.
Silicon Thermal Oxide Wafers: Has high quality silicon thermal oxide wafers in all diameters from 2�¢?�³ to 300mm.
Silicon Nitride Wafers: Has different option of film processing for your silicon needs, including LPCVD nitride.
On Insulator (SOI): Has high quality silicon thermal oxide wafers in all diameters from 2�¢?�³ to 300mm.
Fused Silica Wafers: is the amorphous phase of quartz (SiO2).
Borofloat 33 Glass Wafers: is used in a wide range of applications like micro-optics, sensors, microlithography, semiconductor engineering, lighting, medical technology.
The Maxi Blade Fuse is a time delay fuse that comes with 32, 58, and 80 volt DC ratings. Buy Standard MAXI Blade Fuses in UK that has ampere ratings ranging from 20 to 100 amps. Order the top quality Maxi Blade Fuses from Kafton UK Cable Ties as they are used in a wide range of low voltage automotive and electronic applications.
Standard Mini Blade Fuse has become the original equipment circuit protection standard for foreign and domestic automobiles and trucks. Buy online Standard Mini Blade Fuses in UK that are used in Cars, Vans, Trucks, Coaches, Buses, etc. Order the best quality Standard Mini Blade Fuses from Kafton UK.
Standard Blade Fuse has become the original equipment circuit protection standard for foreign and domestic automobiles and trucks. Order online Standard Blade Fuses in UK that can be readily identifiable and easily replaced for a variety of low voltage electronic applications. Order the best quality Standard Blade Fuses from Kafton UK.
Two independent receptacle terminals made of brass with a Tin over Nickel-plated finish are pre-assembled to a UL approved 94V-0 glass-filled nylon base in this Car Fuse with Holder. Buy Standard Blade Fuse Holders in UK that are designed for 40 amp applications. Order top quality Standard Fuse Holders
SPECIFICATIONS
Our Magnesium oxide meets Chinese national standards, as well as European and American standards.
PHYSICAL PROPERTIES
Magnesium oxide (MgO), or magnesia, is a white hygroscopic solid mineral that occurs naturally as periclase and is a source of magnesium . It has an empirical formula of MgO.Pure MgO is not conductive and has a high resistance to electric current at room temperature.
APPLICATION
MgO is widely used in rubber (tire, cable, conveyor belt, synchronous belt, triangle belt, rubber tube, rubber plate, rubber roller, seal, rubber plug, etc.), adhesive, friction materials, organic magnesium salts, electronic components, catalysts, ceramics, glass fiber reinforced plastic, dye, medicine, national defense and other industries.
1306 Bussmann Iec Standard Fuse 63D33 Suppliers
Short on time? Let Bussmann Iec Standard Fuse 63D33 sellers contact you.