High Strength BFRP Basalt Fiber Rebar Pultrusion Rebar Rods for Construction Engineering Diameter 3-40mm
Basalt fiber reinforcement polymer (BFRP), also called Fiber Reinforce Plastic, is a new kind of composite material which basalt fiber comnbines with epoxy resin andcuring agent.
BFRP Rebar is a kind of rustless electrical insulator, with non-magnetic, especially with great acid resistance and alkali resistance. It could develop the durability of construction.
With light weight property, its density is about 1.9-2.1g/cm3, about 1/4 of steel.
Technical Index of BFRP Rebar
Diameter(mm)
Ultimate Tensile
Load (KN)
Crosssection
(mm2)
Ultimate Tensile
Strength
(Mpa)
E-modulus
(Gpa)
Ultimate Shear
Strength (Mpa)
Weight(g/m)
6
28
28
1000
>50
>150
56
8
51
50.3
1000
108
10
79
78.5
1000
166
12
113
113
1000
245
14
108
133
810
285
16
142
177
800
373
18
182
227
800
470
20
228
284
800
570
22
277
346
800
720
25
362
452
800
1050
Main Features of BFRP Rebar:
Non magnetic,
Electric insulation,
High strength,
High E-modulus,
Coefficient of thermal expansion near with cement concrete.
High resistance to corrosion, acid, alkali and salt.
Application:
Earthquake observing station,
Metro station,bridge,
Seaport pier protection engineering and construction,
Non magnetic or magnetic concrete construction,
Prestressed concrete highway,
Anti-corrosion chemical industry,
Chemical storage tank,
Underground engineering,
MRI(magnetic resonance imaging) facilities basis,
Communication building,
Electronic equipment factory,
Fusion buildings,
Concrete guide board of Maglev railway,
Telecommunications transmission tower,
Television stents and strengthen core of Optical fiber cable.
TMT Bars / Rebar which find usage in the core infrastructure development like construction of Multi Storeyed buildings, bridges, dams, railways, power plants as reinforcement material. These bars are rolled from Tested billets as per IS 2830 which ensures uniform physical and mechanical properties. The range varies from 8mm to 32mm, conforming to BIS 1786 - Fe 415 and Fe 500. Properties Units IS : 1786 Fe 415 OUR BARS IS: 1786 Fe 500 OUR BARS
Rebar refers to steel used for reinforced concrete and prestressed reinforced concrete. Its cross section is round, sometimes square with rounded corners. Including plain round reinforcement, ribbed reinforcement and twisted reinforcement.
Reinforcement for reinforced concrete refers to straight or coiled steel used for reinforcement of reinforced concrete. Its appearance is divided into smooth round reinforcement and deformed reinforcement, and the delivery status is straight bar and coiled round reinforcement
Warehouse Storage
Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project
Packing and shipping
Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.
Our meticulously sorted and processed rebars are characterized by its uniformity and purity, ideal for applications demanding precise metallurgical properties.
GFRP rebar is made of high-strength glass fibers along with a highly durable resin. These
products are developed as a superior alternative to steel in concrete reinforcement. It is
widely used to reinforcing concrete in applications where it is exposed to water, salt water
or chemical environments
- Typical Advantages:
- Non-Corrosive â?? It will not corrode when exposed to a wide variety of corrosive substances
- including chlorides
- High Strength-to-Weight Ratio â?? best reinforcement for weight sensitive reinforcement
- Non-Conductiveâ?? It is excellent electrical and thermal insulator
- Excellent Fatigue Resistanceâ?? performs best in cyclic loading solutions
- Impact Resistanceâ?? It resists sudden and severe point loading
- Magnetic Resistance â?? completely non-effective to electromagnetic fields; excellent for
use in electromagnetic testing facilities
- Light Weight easy to transport, no need for lifting equipment, easy to handle
Our steel rebars are manufactured with precision Standards, offering exceptional strength, durability, and reliability for construction and infrastructure projects. The rebars are engineered with the following detailed specifications:
Mechanical Properties:
Yield Strength (Re): â?¥ 430 N/mm�²
Tensile Strength (Rm): â?¥ 620 N/mm�²
Ratio of Tensile Strength to Yield Strength (Rm/Re): â?¥ 1.28
Elongation: â?¥ 18%
Radius for Bend Test (degrees): 180
Applications:
Ideal for reinforced concrete construction projects such as residential, commercial, and industrial buildings, bridges, and
infrastructure projects.
Ensures high performance under tensile and compressive stresses.
Key Features:
Conforms to stringent national standards.
Enhanced mechanical strength and chemical stability.
Superior resistance to bending and elongation.
Packaging & Delivery:
Available in various lengths and diameters as per project requirements.
Standard export-grade packaging to ensure safe delivery.
1. Chopped basalt fiber
Basalt fiber is a kind of inorganic fiber material. Chopped basalt fiber is an inorganic mineral fiber with a length of less than 50mm and can be evenly dispersed in cement concrete.
2. Characteristics of chopped basalt fibers
(1) The naturalness of raw materials. Because the raw material for producing continuous basalt fiber depends on the natural volcanic extrusive rock, there are no ingredients harmful to human health except that it is inherently high in chemical stability and thermal stability.
(2) Comprehensive performance. Basalt fiber is acid resistant and alkali resistant. It is both low temperature and high temperature resistant. It is insulated and insulated by heat and electricity. Its tensile strength is higher than that of large tow carbon fiber. Its elongation at break is even better than that of small tow carbon fibers. It has high compressive strength, shear strength and adaptability to aging, and has good comprehensive properties in harsh environment.
(3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of steel fiber and polyester fiber.
(4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with asphalt concrete, cement concrete and mortar. The newly mixed basalt fiber concrete has stable volume, good workability and durability, and has superior high temperature resistance, anti-seepage, crack resistance and impact resistance.
1. Production: basalt fiber fabric is made of continuous basalt fiber textile yarn through warping, weaving and coating.
2. Weaving methods according to requirements: unidirectional cloth, plain cloth, twill cloth and grid cloth.
2. Application: reinforced mesh cloth, fireproof cloth, fishing rod cloth, luggage decoration cloth, electrical insulation cloth, bulletproof cloth, etc.
3. Packaging: 100M / roll (or customized as required).
4. Performance: high strength, high temperature resistance, good electrical insulation, non hygroscopic, acid and alkali corrosion resistance.High temperature resistance 1000 �° C
5. Specification and model: bfw16 * 20-100 (120)
BFW: basalt fiber fabric;Completely replace carbon fiber sheet building reinforcement
16 * 20: the warp and weft density of yarn is 16 and 20 pieces / cm respectively;
100: the width of the fabric is 100 cm;
(120): the mass per unit area of fabric is 120 g / m2.
BFNP5*5-200(160)
BFNP: basalt fiber mesh cloth (coated and shaped);
5 * 5: the longitude and latitude mesh size of the cloth surface is 5 and 5mm;
200: the width of the grid is 200 cm;
(160): the weight of grid cloth per unit area is 160g / m2.
Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer)
Basalt fiber reinforcement (new material to replace reinforcement)
Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã??
Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters)
1. The cost is the same as that of ordinary reinforcement;
2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa,
3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust.
4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges.
5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement.
6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??
The basalt fiber roving of our company adopts the new tank kiln method and 2400 hole large leakage plate to form basalt roving products With a series of advantages such as high strength, large modulus, good temperature resistance, good chemical corrosion resistance and good electrical insulation, basalt is produced with homogenized basalt raw materials, with excellent performance, stable quality and small dispersion coefficient.
Basalt fiber roving is a new material to replace glass fiber and carbon fiber
1. Basalt short fiber - a new material to replace steel fiber. Basalt short fiber is an inorganic mineral fiber with a length of less than 50mm, which can be evenly dispersed in cement concrete.
2. Characteristics of basalt short fiber (1) the specific gravity of steel fiber is 7.8 and that of cement concrete is 2.5. After mixing, the specific gravity of steel fiber is higher than that of cement, and the cement will sink and have poor dispersion.
The specific gravity of basalt short fiber is 2.6, which is basically equivalent to that of cement concrete. After mixing, it does not sink, has good dispersion, is degradable, and is green. The road surface will not be as hard as steel fiber, resulting in car driving noise..
(2) Basalt staple fiber is a real "multifunctional" fiber. Acid and alkali resistance (especially alkali resistance, fully applicable to cement concrete), low and high temperature resistance, insulation and sound insulation. The tensile strength is three times that of steel fiber. The corrosion resistance of basalt fiber is better than that of steel fiber. The compressive strength is 20% higher than that of steel fiber, which is suitable for harsh environment. It has excellent comprehensive performance.
(3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of 50% steel fiber.
(4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with cement concrete and mortar. Fresh basalt fiber concrete has stable volume, good workability and durability, and has excellent high temperature resistance, impermeability, crack resistance and impact resistance.
We have a wide variety stock of rebar, available dimensions from 8 mm to 32 mm,grades 60,40 ASTM A615,and BS4449, lengths 4,5,6,9,and 12 meters,plain,and deformed bars. Material SD390/490/400,B500B/GR460B,HRB400/500,ASTM A615 GR40/60 Standard BS4449,JIS,ASTM/A615 Length 6m,12m Application Widely used in construction industry.
can supply REBARS as per below: -Size: 6mm to 50 mm -Length: 6 meters up to 16 meters -Packing: Once folded bundles available.
hese corrugated steel bars are used as tension devices in the construction of concrete slabs and walls, as well as decorative/ornamental grille work. When used in concrete constructions, these help to strengthen and hold concrete when it is compressed, and come in a wide variety of sizes to fit various building construction needs. At ARC. AVAILABLE IN 3/8 (10mm), 5/8 (16mm), (20mm), (12mm), 1 (25mm) and 1 (32mm)
Rebar refers to steel used for reinforced concrete and prestressed reinforced concrete. Its cross section is round, sometimes square with rounded corners. Including plain round reinforcement, ribbed reinforcement and twisted reinforcement.
Reinforcement for reinforced concrete refers to straight or coiled steel used for reinforcement of reinforced concrete. Its appearance is divided into smooth round reinforcement and deformed reinforcement, and the delivery status is straight bar and coiled round reinforcement
Warehouse Storage
Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project
Packing and shipping
Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period
Application field
The company adheres to the corporate spirit of never being satisfied and striving to surpass, and continuously creates new brilliance with the new economic concept of continuous innovation. Reward guests and friends from all over the world with satisfactory service. Our company is willing to cooperate closely with friends from all walks of life at home and abroad, and work together to create a better tomorrow
1. Chopped basalt fiber
Basalt fiber is a kind of inorganic fiber material. Chopped basalt fiber is an inorganic mineral fiber with a length of less than 50mm and can be evenly dispersed in cement concrete.
2. Characteristics of chopped basalt fibers
(1) The naturalness of raw materials. Because the raw material for producing continuous basalt fiber depends on the natural volcanic extrusive rock, there are no ingredients harmful to human health except that it is inherently high in chemical stability and thermal stability.
(2) Comprehensive performance. Basalt fiber is acid resistant and alkali resistant. It is both low temperature and high temperature resistant. It is insulated and insulated by heat and electricity. Its tensile strength is higher than that of large tow carbon fiber. Its elongation at break is even better than that of small tow carbon fibers. It has high compressive strength, shear strength and adaptability to aging, and has good comprehensive properties in harsh environment.
(3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of steel fiber and polyester fiber.
(4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with asphalt concrete, cement concrete and mortar. The newly mixed basalt fiber concrete has stable volume, good workability and durability, and has superior high temperature resistance, anti-seepage, crack resistance and impact resistance.
1. Production: basalt fiber fabric is made of continuous basalt fiber textile yarn through warping, weaving and coating.
2. Weaving methods according to requirements: unidirectional cloth, plain cloth, twill cloth and grid cloth.
2. Application: reinforced mesh cloth, fireproof cloth, fishing rod cloth, luggage decoration cloth, electrical insulation cloth, bulletproof cloth, etc.
3. Packaging: 100M / roll (or customized as required).
4. Performance: high strength, high temperature resistance, good electrical insulation, non hygroscopic, acid and alkali corrosion resistance.
5. Specification and model: bfw16 * 20-100 (120)
BFW: basalt fiber fabric;
16 * 20: the warp and weft density of yarn is 16 and 20 pieces / cm respectively;
100: the width of the fabric is 100 cm;
(120): the mass per unit area of fabric is 120 g / m2.
BFNP5*5-200(160)
BFNP: basalt fiber mesh cloth (coated and shaped);
5 * 5: the longitude and latitude mesh size of the cloth surface is 5 and 5mm;
200: the width of the grid is 200 cm;
(160): the weight of grid cloth per unit area is 160g / m2.
The basalt fiber roving of our company adopts the new tank kiln method and 2400 hole large leakage plate to form basalt roving products With a series of advantages such as high strength, large modulus, good temperature resistance, good chemical corrosion resistance and good electrical insulation, basalt is produced with homogenized basalt raw materials, with excellent performance, stable quality and small dispersion coefficient.
Basalt fiber roving is a new material to replace glass fiber and carbon fiber
